Attachment not saved

Hi All,
Scenario: .Net <> XI <> SAP CRM (Synchronous call)
In this scenario, I am passing an URL string from XI to importing parameter of RFC (SAP CRM), which should pick the file, based on the URL string passed and save the attachment in CRM.
When I try to pass the URL string from Test Interface of RFC, it saves an attachment in CRM, but when I am passing the same URL string from XI to importing parameter of RFC, it is giving me response as attachment failed.
Later I did the Debug to understand whether the URL string which I was passing was correct or not. But to my surprise, while doing Debug, it saved the attachment in CRM.
Could anybody help me on resolving this problem.
Thanks in Advance
Ashish.

hi,
what you need to do it to try debugging
your scenario with real message
have a look at those two weblogs:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
- from me
/people/sravya.talanki2/blog/2006/02/28/simulating-xi-messages-proto - from Sravya Talanki
you also mention that you've tried debugging
did you do it like this?
/people/michal.krawczyk2/blog/2006/01/17/xi-debugging-rfc-calls-from-the-xi-not-possible-who-said-that-
if you use this method you can be sure that
you'll get the same results (except for authorization)
as with the call from XI
BTW
you're not using any BAPI or anything
that needs to be commited explicitly ?
these might help you to debug your scenario
even better as it's not possible that once it works
and once it doesn't
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

Documents/attachments not saved in workcenter incident management?!

Hi all!
We patched our system to SPS 20.
While testing the designed functionality of the incident management within the work centers I got an problem with saving attachements.
I can choose an attachement/document (.doc; .xls; .pdf; etc.) and assign it to the ticket.
If I save the ticket I get the feedback "saved correctly" but the attachment disappears and is not existing any
more in the ticket.
This only happens within the work center. In SAP GUI the attachements can be assigned and saved correctly.
We checked and implemented the latest notes for SPS 20. Also 1269928 and 1080131.
Does anyone have had a problem like this before?
Thanks for you help in advance.
Regards,
Alex

Hi Alex,
you might check SAP Note [1401196|https://service.sap.com/sap/support/notes/1401196] "Work Centers: attachment not saved in Incident Management" to solve the problem.
Best regards,
Andreas

Attachment modifications not saving when routing document

The issue is that in some cases attachment file modification are not saved and forwarded to the next recipient when using the routing slip feature.
Here is the scenario:
A user sends an excel document as an attachment and routes to several users via the groupwise routing slip feature.
The normal and successful work flow is this:
Next user in the route recieve the email.
Opens the document (in excel) and makes some changes in the document.
They select save (not save as).
Then then click the "completed" check box to continue the routing.
The next user will receive the email and attachment and the changes will be included.
The issue is that in many cases (about 50% of the time) the attachement edits will not stick and are not included for the subsequent recipients.
I have done some experimentation and it appears to be related to how the groupwise client handles temporary files.
It looks like there are two different folders used - my documents\groupwise and user\local settings\temp\xpgrwise.
When it works it appears that "edits" are saved in the temporary files folder and then "re-attached" to the routed email.
And the temp files are deleted when the email is closed.
In the failed scenario the attachment file does not get deleted from the temporary folder (and edits are not forwarded).
It appears to me that there may be another "unknown" temp file folder someplace that is being referenced and causing the issue.
We are using groupwise 8 client by the way and I think the issue started after the version 8 upgrade.
Has anyone else experienced and/or resolved this.
Any help would be much appreciated.

jensenms,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Mail is not saving attachment and save as is not working

Suddenly my Mail is not saving attachment and save as is not working. I tried to save an email as I use to do but it is not completing the task. I should I do?
Thanks for any help,
Mario Lordeiro

Mario,
Was there also NO choice to View As Icon, in the contextual menu? If not, these items/images may be embedded in HTML, rather than true attachments. Other choices for normal attachments would include Open Attachment, Open With, Save to Downloads Folder -- are any of those present in the contextual menu?
With such a message open, click on View in the menubar, place the cursor on Message in the pull-down menu, and choose Raw Source. Is there any HTML code present? Is there a header immediately before any code representing what you believe is an attached file?
If need be, I can send you an email message with a known form of attachment.
Ernie

When i attach workflow to document library, the custom columns data is not saving.

Hi, i had created SharePoint designer workflow (send Email) for Document Library.
I had created Custom columns like.
"Employee Name" of type Person or Group
"Resume Type" of type Choice
When i attach my workflow to document library, the columns data is not saved.
It is just uploading resume, and sends email to the user groups, but data is not saved for custom columns. !.e "Employee Name" and "Resume Type".
Any help will be appreciated.

In SharePoint Document Library, first the document will be uploaded and then the metadata will be updated. So, in your workflow settings, select start workflow when item is changed instead of item is created and then try.

Mail attachments not saving to the folder I choose

My mail attachments are not saving to the folder I choose. When I select a file to save in the mail drop-down box, I am given options to save to a folder of my choice. However, when I select save the document is actually saved deep in some Mail Downloads area, not in my chosen folder. Has anyone had a similar problem and found a solution?

What kind of files are you trying to attach?
Is it all recipients having this problem or specific one(s)?
Could you possibly post a screenshot of the sent message from your side and a screenshot of what the recipient sees?
What happens if you send one of these messages to yourself?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Outlook error "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"

Hi,
Re: "The Delegate settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed"
I have a client who is getting the above error when attempting to change delegate permissions in Outlook 2010.
She is also getting this error when she tries to remove a delegate.
I have tried recreating her mail profile.
I have also tried kb2593557. The auto fix didn't work at all and the registry fix only removes the error message and not the problem. This client would like to be able to edit her delegate permissions.
She is on Exchange 2010
Any assistance would be appreciated.

The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

Settings not saved correctly

Saving that always a file should be opened with a program does not work correct.
I want *.nzb to be opened with a certain program. I save this combination and still everytime I get the option of an other programm.

The article you provided is not related to the error message that the user is getting it.
Can you please provide better solution? I know this answer and this post is old but I am having same issue.
The error message is only (The Delegates settings were not saved correctly. cannot activate send-on-behalf-of list. The operation failed) I was not able to attach screen shot.

Data form not saving enter data after hit of submit

Hi,
Entered data on Data from not saving after hitting the submit button in smartview.
A rules is attached to the same data from and its running on save, after retrieve it's not display enter data.
it's urgent, please help.
Regards

You need to have the below updates done on the affected PC.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings]\
"ReceiveTimeout"=00dbba00 (hexadecimal)
"KeepAliveTimeout"=300000 (decimal)
"ServerInfoTimeout"=300000 (decimal)
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]\
"ReceiveTimeout"=00dbba00 (hexadecimal)
"KeepAliveTimeout"=300000 (decimal)
"ServerInfoTimeout"=300000 (decimal)
if its windows 7 machine the same key has to be added under wow6432node under same path.
once the changes are done reboot the machine and try launching the BR. Hope it works !!!
Thanks
Amith

Attachement not opened in UWL for trip requuest approver in workflow:

Hi All,
Issue Description:
Attachment not opening in UWL while send for approval of Travel Request but opening in ECC.
Issue Object:
BO: BUS2089 Method: Display
Created a custom BO: ZBUS2089 and delegated to standard BUS2089.
Looked Solutions:
SAP Note :
568323 - Travel manager: Services for the object
596584 - Travel manager - Services for the object II
But not applicable for this version.
Brief Description:
An employee raising a travel request in his login while rising, he attaching the bill scanned copy in the travel request.
Step: 1 Clicking Create New Travel Request
By clicking Attachment Button Adding Attachment:
Attaching a word document
Trip is saved and send for approval:
Travel Request for Approval is received in Work item:
Opening the work item from UWL:
Now by Clicking the Object and attachment Employee Trip 0000000079 viewing trip Details
Now opening the Attachment List:
Attachment List is displayed:
Selecting the line item and displaying the attachment by Pressing Display Button:
Word Document Not opening.
But In ECC
Attached word document is opened:
Please Provide solution for the Problem.
Please find the attached document for the Screenshots.

I'm not sure this is similar to your problem but I had an issue once with opening word documents from the UWL and I think that the problem was that it was opened via ITS and ITS didn't not open word documents. try to set the links to open in winGUI and maybe than they will work.
In the portal go to:
Content Administration->Portal Content->Portal Users->Standard Portal Users->Universal Worklist->UWL - Launch SAP Transaction
Under property category choose 'content - transaction' and set 'SAP GUI Type' to 'SAP GUI for Windows'.
maybe it will help your problem as well.

Email Billing document as PDF Attachment while saving from VF01/02

Hi,
Can anybody suggest if there is any BADI/User Exit/Configuration exists in order to email Billing document as a PDF attachment while saving from VF01 or VF02?
We need to trigger this while saving the Output type say, VF02 GOTO -> HEADER -> OUTPUT (select the output type) -> SAVE - should send an email with PDF attachment.
I have written the code for sending email with PDF attachment. Presently this code is included in the Print program for the sapscript and an email is sent when an output is issued from VF01/02/03 where as the requirement is to send email whenever the document is saved.
Thanks in Advance,
Srinivas

Hi,
While saving subroutine FORM_OPEN will get triggerred, and this will be included in the Z Program. If it is not contained in the Z program, include this subroutine. This subroutine will have include RVADOPFO.
The above include will have the function module ADDR_GET_NEXT_COMM_TYPE, and the import parameter LVS_COMM_VALUES will contain the address number and email address to whom the pdf needs to be sent.
So here, i.e. In place of standard include RVADOPFO, put custom include ZRVADOPFO, and modify the code as below.
After the function module ADDR_GET_NEXT_COMM_TYPE, read the email address from any custom table based on the various conditions or hard coded value, then move it to the below variable.
LVS_COMM_VALUES-ADSMTP-SMTP_ADDR.
And remaining functionality will be taken care by the standard code. i.e. converting the spool to PDF and attaching it while sending the email etc....
If I am not wrong, the same functionality will work even while saving the sales order etc..
Regards,
Santu.

Last changes not saved??

Ok I have an issue with Flash CS 5.5
When creating content and publish the swf and then save the fla file , all seem fine.
When closing the fla and reopen it later, the last changes I made are not saved??
This happens NOT every time.
At first I thought it was me that I didn't save the document before closing, but no this really happens!!
Never had this issue anywhere, but for now my only option is to stay with CS5.
Does anyone have similair issues with 5.5?
Menno
running Win7x64, 24 GB Ram, GTX 580

I am having similar issues with flash CS5.5.
On the stage in flash I have 4 text blocks. Instead of creating separate instances of each text block, I create one graphic and separate the text blocks into separate layers. Next I put each text block into it's own key frame while on it's own separate layer. So layer one is on frame 1. Layer 2 is on frame two and so on and so forth up until frame 4.
Now on layer two I put a blank key frame on frame 1 so that the text block for layer 2 does not show up until frame 2. Same with layer 3, and layer 4 with each text block. This is for animation purposes.
Now I'm back on the main stage and timeline. I bring in an instance of the new graphic symbol I've made. I go into my properties pallet down to the loop option and tell the graphic to play single frame and it's first frame is frame 1 then I put in a motion tween, the new motion tween NOT the classic tween. I do this so I can use some preset animations that I've created. I then drag that instance of that animation I just created a little on farther down the timeline. I then go to my properties pallet and change the frame it's supposed to play from frame 1 to frame 2. Still using the play single frame looping option. I do this until I get all 4 text blocks to come in as I need them and when I need them.
Also after each animation is done, I put in a blank key frame by hitting the F7 button to insert one after the animation is done. I've attached a screen shot of my main timeline and also a screen shot of what the inside of my graphic instance is supposed to look like when I finish editing it to look as I need to to do as I want it to do, to help explain my issue. As you can see from the image, I have several key frames inserted on a layer above the motion tweens after the motions end. At these key frames I input the frame number that the previous animation just played. This saves on layers, and saves on creating several graphics which reduces my file size because I am using the same instance of one graphic instead of instances of multiple graphics.
Now the problem is after I save the file and close it out, I then re-open the file and the graphic I just created reverts to the initial creation of said graphic. So all text blocks of my text are on frame 1, layer 1. All the layers I created, all the work I did in creating that graphic is gone. The animations are still in place, and the frame numbers for the looping option are still in place. In fact the looping option of single frame is still in place. It's the graphics that continuously revert backwards instead of staying as I've made them to be.
This also happens with drawn objects that I've converted to a graphic symbol and groups of images I've converted to a graphic symbol doing the exact same thing I did for the text blocks only using either drawings via the drawing tools in flash or bringing in bitmap images. Note this does NOT affect buttons or movie clips as far as I know. This is something that has been going on for weeks since I've upgraded to CS5.5 flash. It doesn't make sense and it should not be doing this. I had no problems like this using CS4. My clients required that I use CS5 because they were updating to CS5 so I did as requested. Now I run into this problem. It makes for extra work, my clients are not happy with this happening and I need a fix as soon as possible.
Thanks,
h_cline2
Flash Animator/Developer

How to extract the data from the chart. Data were not saved

Hi everyone. Beginners question, but could not find an answer to it
How can I get the numerical data from the chart. Chart is already on the screen and data vere not saved into file during VI run. All I have - just chart, but I need numbers
Thanks
Message Edited by olka on 07-18-2007 09:41 AM

You can still do it, the process just changes a bit...
Copy the control to a new VI as before, and change it into a control.
Create the diagram shown in the attached screen shot.
Run the new VI. You will get two arrays: one of x-axis values and one of y-axis values.
Mike...
Message Edited by mikeporter on 07-18-2007 12:21 PM
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
Attachments:
extracting xy data.JPG ‏5 KB

Videos not saved in the Video app

My videos got saved in the Photos app under Albums:all imported/last imported/saved photo.
Videos from SD Card are saved in ...imported
Videos as email attachment are saved in... Saved photos
Why are videos saved in the Photo app and not in the Video app and how do I save them in the video app?
By tweaking some preferences settings somewhere?

All saved images and videos are saved into the photos app... The only way to get them into the videos app is through the computer...
I have a suspicion that it is done this way so that photos handles all the importing/saving aside from iTunes... It simplifies the location of a full import from a camera, otherwise, the iPad would have to decide if the video is compatible and then decide on the app rather than a simple one stop shop...

Crystal Reports 8.5 not saving changes to report criteria

When I use the formula editor to add new criteria to the report criteria formula, the changes are not saved when the report is closed. It doesn't seem to matter how I exit the formula editor, and I've even tried "save as" and saving the report to a new name prior to closing. When I reopen the report, the changes are gone.
Sometimes the changes don't even last that long - they often disappear while doing a refresh.
Are there and known bugs that I haven't found - or better yet, any solutions?

Hi Roberta.
I've had this happen a few times as well. Usually though a message will come up at some point in time saying. If the report is locked when you open it, either because someone else has the same file opened in Crystal or if you open the report from an e-mail attachement, a message will come up saying something in the lines of the report cannot be saved and it must be saved to a new file.
When you do the Save As, where are you saving it to? Try creating a new folder and saving it to that folder. You should have full permissions to the new folder and I'm hoping it will save. I just want to eliminate any problems with permissions. After you save the file, check the properties of the file. Did the file's date and time update or does it still have the original date?
When you open the report in Crystal, go to File on the menu bar and make sure Save Data with Report is not checked. Make your changes and rerun the report and save it again. See if that helps.
These are the two common problems I've had when this happens to me.
Hope this helps,
Brian

Attachment not saved

Similar Messages

Maybe you are looking for