Audio Controller Issue

I've got an sound issue with my HP Pavillion DV6904ca, it shows that there is no audio output device, orginally when i installed windows vista it had the same issue then it found it one time and then restarted comupter later and then when started up it didnt exist again. i believe the issue is the audio controller but dont know how to rectify the situation
matt

Hello
If the yellow exclamation mark occurs in the Device Manager so you need to install the driver. On the Toshiba driver page you can find may necessary drivers.
Please visit this site:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Bye

Similar Messages

  • Multimedia Audio Controller issues "The data is Invalid"

    can someone please explain to me what that meens and how to resolve the issue?
    Uninstalling and reinstalling has done nothing, roll back drivers has done nothing and also defeats the purpose of updating drivers. This issue began when i was prompted to update drivers, so i did and BANG no more sound.
    All files on the DVD install ACCEPT the WDM drivers which im guessing are pretty important. Everytime they try and install i get a Data invalid message and the typical yellow exclamation mark in the device manager over 2 options. High definition audio and Multimedia Audio Controller.
    This has hppened to me anytime ive ever tried to update drivers, only way i fixed it was to reinstall OS, really not keen to do that anymore, just to install a sound driver.
    Also, they really should not be telling us to update sound drivers, because they never ever update properly,without hassle.
    Using XtremeMusic X-Fi SB04606
    Windows XP
    ASUS P5B Deluxe Wi-FI
    Intel core 2 duo 2.67Ghz
    3Gb's ram
    P.s The sound card was workin before i tried to update teh drivers from the Creative Support Website. I followed instructions there and my sound card is no longer working.

    Hi,
    You might want to attempt the following registry fix. It is strongly recommended to back up the current registry settings and create a restore point before proceeding.
    1. Select Start - Run and type regedit to open the Registry Editor.
    2. Browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\P CI and you see a number of keys in the form VEN_xxxx, where xxxx are strings such as VEN_1102&DEV_0004&SUBSYS_00511102&REV_03.
    3. Under each of these folders you will find another folder with a long numerical name. Open each folder and look for the DeviceDesc which matches the hardware you want to install.
    4. Right Click on the VEN_xxxx for that device and select Permissions and then tick Allow for Full Control.
    5. Close Regedit and then continue with the installation of your device.
    You might also want to download the file PNPREG.EXE from www.microsoft.com, and run the pnpreg tool from a command prompt. After downloading the file, select Start - Run and type COMMAND. At the Command prompt, type Pnpreg -l.

  • When will Adobe Refine the Interactive PDF Audio Controller?

    Whenever Reader plays interactive audio content, this dreadfully small or dreadfully large audio controller comes up (hard to understand how the size is respected via inDesign's tools), looking incredibly clunky and does not even have an exit button so that you can close the played audio file and continue to read the page!
    When will this be fixed as an update to InDesign CS6 ? This feature should never have been allowed to be released in its current form. When a core feature fails to live up to its promise, then it's in breach of basic consumer laws where I live!

    Pat Willener, thank you for your post but this is a forum for users like me to post about issues, some of which may be affecting other uses and some of which may be answered by other users.
    If Adobe had any kind of interest in the purpose of these forums and the support of their product, if they were also pro-active, then they'd have someone over here acting upon deficiencies mentioned here, not the other way around. FGS, I'm not paid by Adobe to do their bidding, I pay them to provide me with a product that I believe I should have already got in return for my money, not a product with half-cocked features. I filed a feature request, as per your instructions weeks ago and Adobe have not replied.
    From what I now know, Adobe is extremely deficient when it comes to after sales service and the company is gaining a very poor reputation because of that.
    Which brings me back to what I asked, doesn't anyone from Adobe attend to these discussion threads? From my time at other forums, a company rep responds giving a full answer and timeline for a fix.

  • Audio Sync Issue With FLME 3.1 and BMIP Card

    Hello Folks....First off..Happy Holidays to all.  Secondly...have Black Magic Intensity Pro Card (PCI-e) installed on i7, 3.33GHZ, 24 Gig Ram, Raid Controller  2x 600GIG Drives, Win7 64bit etc etc.
    Noticed today on a live show...we had an audio sync issue of half to full second.  This was being pushed via FLME 3.1 and audio was married to the BMIP audio inputs.
    Video input was Component and audio as analog.
    Any thoughts why this would happen?
    Bandwidth was more than acceptable (pushing 700kbps over a T1)
    Appreciate any insight.
    Thanks,
    KC

    Hi!
    I am having the same issue with the HD Extreme card. Did any of you find a solution to the problem?
    Best regards
    Jan

  • "sound, audio controller" missing, HELP!

    i have no idea what went wrong, i have a red x next to my speaker on the bottom of my screen. ive tried checking the "sound, audio, controller" but that is missing, i downladed a audio driver but i have no idea what to do next, im so sad this has happened. can someone please help me. i have a hp pavillion dv6000, 32 bit, (service pack 2, if that means anything)

    Hey oneblove,
    Thanks for the model number, but I think I might need your exact product number to make sure you're getting the right audio driver for your particular notebook. Here are the steps to get your product number.
    Once I have your product number I can provide you with a link to your notebook's driver page and if you're still having problems with your audio after you get the right driver, just let me know.
    Another thing you can check in the mean-time, is to make sure your speakers are the default device. 
    Right Click on the Speaker symbol in the system tray > Click Playback Devices > Make sure 'Speakers'/'Speakers and Headphones' has a Green checkmark on it. If not, select it and click the Set Default button at the bottom.
    If you have recently plugged up an external monitor or a set of external speakers, that device may have taken 'Speakers'/'Speakers and Headphones' off of default.
    Please let me know if you have any questions or if these suggestions help (this could help other users with the same issue). I'll keep an eye out for your reply.

  • Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

    Hi.
    My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card  with 256MB of RAM)
    Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or  Reader a web-based applet that identifies my GPU or Audio controller
    and finds the latest graphics driver for my GPU, and Audio.
    I have two Windows XP installations:
    Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
    I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
    First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
    and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
    Host Controller in device manager.
    First:  Yes, my motherboard has integrated video, and integrated audio card
    According to the screen shots above, then
    The vendor ID of Multimedia Audio Controller  is 8086 and the device ID is
    24D5.
    The vendor ID of Video Controller  is 8086 and the device ID is
    2572.
    I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE  DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
    Thus, could you please help me to find them?
    I have tried installing a soundMAX card  driver, however, I found this error.
    I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
    However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
    The motherboard model is:
    Belarc Advisor Computer Profile
    Operating
    System
    System
    Model
    Windows XP Professional
    Service Pack 3 (build 2600)
    Install Language: English (United
    States)
    System Locale: Arabic (Yemen)
    Installed: 22/03/2013 12:03:16
    ص
    Boot Mode: BIOS (Secure
    Boot not supported)
    Enclosure Type:
    Desktop
    Processor
    <sup>a</sup>
    Main Circuit Board
    <sup>b</sup>
    3.00 gigahertz Intel Pentium
    4
    16 kilobyte primary memory cache
    1024 kilobyte secondary memory
    cache
    64-bit ready
    Hyper-threaded (2 total)
    Board: 775i65G.
    Bus
    Clock: 200 megahertz
    BIOS: American Megatrends Inc. P3.00
    03/20/2007
    Drives
    Memory Modules
    <sup>c,d</sup>
    39.99 Gigabytes
    Usable Hard Drive Capacity
    29.48 Gigabytes Hard Drive Free
    Space
    COMPAQ CD-ROM LTN486S [Optical drive]
    3.5" format removeable
    media [Floppy drive]
    WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
    0, rev 05.03E05, SMART Status:
    Healthy
    504 Megabytes Usable
    Installed Memory
    Slot 'DIMM0' has 512 MB
    Slot 'DIMM1' is
    Empty
    Local Drive
    Volumes
    c: (NTFS on drive 0) *
    20.98 GB
    14.16 GB free
    d: (NTFS on drive 0)
    19.01 GB
    15.33 GB free
    <center>
    * Operating System is installed on
    c:
    </center>
    Network
    Drives
    None
    discovered
    Users
    <small>(mouse over user name for details)</small>
    Printers
    local user
    accounts
    last logon
    عايض
    لرضي
    19/01/2015 10:59:17 م
    (admin)
    local system
    accounts
    Administrator
    never
    (admin)
    Guest
    never
    HelpAssistant
    never
    SUPPORT_388945a0
    never
    <center>Marks
    a disabled account;   Marks
    a locked account </center>
    Controllers
    Display
    Standard floppy disk
    controller
    Intel(R) 82801EB Ultra ATA Storage Controllers
    Primary IDE
    Channel [Controller]
    Secondary IDE Channel [Controller]
    None
    discovered
    Bus
    Adapters
    Multimedia
    Intel(R) 82801EB USB
    Universal Host Controller - 24D2
    Intel(R) 82801EB USB Universal Host
    Controller - 24D4
    Intel(R) 82801EB USB Universal Host Controller -
    24D7
    Intel(R) 82801EB USB Universal Host Controller - 24DE
    Intel(R)
    82801EB USB2 Enhanced Host Controller - 24DD
    None
    discovered
    Virus
    Protection <small>[Back to Top]</small>
    Group
    Policies
    Norton AntiVirus Version 18.1.0.37
        Virus Definitions Version Not Up To Date
        Realtime File Scanning
    On
    None
    discovered
    Communications
    Other
    Devices
    ↓ Realtek RTL8139 Family PCI Fast
    Ethernet NIC
    Status:
    Cable unplugged
    Dhcp Server:
    none responded
    Physical Address:
    00:19:66:1F:F7:54
    USB Human Interface
    Device
    Standard 101/102-Key or Microsoft Natural PS/2
    Keyboard
    HID-compliant mouse
    USB Root Hub (5x)
    USB Storage Use in past 30 Days<small>(mouse
    over last used for details)</small>
    Hosted Virtual Machines<small> (mouse over
    name for details)</small>
    Last
    Used
    SanDisk Cruzer Blade, s/n
    4C532000020502112303, rev 2.01
    19/01/2015
    09:32:57 م*
    USB 2.0 USB Flash Drive, s/n
    59309e92e21612, rev 0.00
    09/01/2015
    12:29:17 ص*
    <center>* Possibly used again before the reboot following this
    time.</center>
    None
    discovered
    See your entire
    network map...
    click for Belarc's System Management products
    A man should convert his anger and sadness into strength to continue living in this life.

    Dont worry, dont think anyone was as a matter of fact
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
    http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
    http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
    that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

  • Audio synch issues in QT

    My project displays fine in PE8. No audio synch issues in the preview. After outputting the project to a quicktime movie withe LAN setting the audio becomes seems to run faster than the video, becoming more and more out of synch as the movie plays. Any ideas what might cause such an issue?

    The Stream info in MPEG streamclip for files from both cameras gives me this info:
    Bitrate: 30.31 Mpbs
    Video Tracks:
    DV/DVCPRO - NTSC, 720x480, 16:9, 29.9699999999999 fps, 28.77 Mbps
    Audio Tracks:
    16-Bit Little Endian mono, 48 khz, 768 kbps
    I don't know if this helps.

  • ES1946 (Solo) Audio controller not recognized

    Dear all,
    ES1946 (Solo) Audio controller is not recognized on my box. I examined dmesg, it said:
    es1938: OPL3 not detected at 0x1090
    I've listed my dmesg and rc.conf below. Could anyone kindly look into it, and give me a hint to solve this problem?
    Best regards,
    Wen
    dmesg
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000000bff0000 (usable)
    BIOS-e820: 000000000bff0000 - 000000000bfffc00 (ACPI data)
    BIOS-e820: 000000000bfffc00 - 000000000c000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    191MB LOWMEM available.
    Entering add_active_range(0, 0, 49136) 0 entries of 256 used
    Zone PFN ranges:
      DMA             0 ->     4096
      Normal       4096 ->    49136
      HighMem     49136 ->    49136
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
        0:        0 ->    49136
    On node 0 totalpages: 49136
      DMA zone: 32 pages used for memmap
      DMA zone: 0 pages reserved
      DMA zone: 4064 pages, LIFO batch:0
      Normal zone: 352 pages used for memmap
      Normal zone: 44688 pages, LIFO batch:7
      HighMem zone: 0 pages used for memmap
      Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F6B60, 0014 (r0 PTLTD )
    ACPI: RSDT 0BFFD520, 002C (r1 PTLTD    RSDT          0  LTP        0)
    ACPI: FACP 0BFFFB65, 0074 (r1 IBM    TP240           2 PTL     F4240)
    ACPI: DSDT 0BFFD54C, 2619 (r1    PTL    BX-TJ        0 MSFT  100000B)
    ACPI: FACS 0BFFFFC0, 0040
    ACPI: BOOT 0BFFFBD9, 0027 (r1 PTLTD  $SBFTBL$        0  LTP        1)
    ACPI: PM-Timer IO Port: 0x8008
    Allocating PCI resources starting at 10000000 (gap: 0c000000:f3f80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 48752
    Kernel command line: root=/dev/sda8 ro
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0118d000)
    Enabling fast FPU save and restore... done.
    Initializing CPU#0
    PID hash table entries: 1024 (order: 10, 4096 bytes)
    Detected 365.025 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Memory: 189624k/196544k available (2120k kernel code, 6384k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
        fixmap  : 0xffee4000 - 0xfffff000   (1132 kB)
        pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
        vmalloc : 0xcc800000 - 0xff7fe000   ( 815 MB)
        lowmem  : 0xc0000000 - 0xcbff0000   ( 191 MB)
          .init : 0xc03d3000 - 0xc0415000   ( 264 kB)
          .data : 0xc031225e - 0xc03cc380   ( 744 kB)
          .text : 0xc0100000 - 0xc031225e   (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 731.57 BogoMIPS (lpj=1218523)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 128K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0a20)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (731.57 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd9e5, last bus=0
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 2180-218f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres I PIO at 0398-0399
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 14)
    ACPI: Power Resource [PFAN] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:09: can't evaluate _PRS: 12321<6>pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    system 00:05: iomem range 0xe0000-0xfffff could not be reserved
    system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:06: ioport range 0x4d0-0x4d1 has been reserved
    system 00:06: ioport range 0x8000-0x803f has been reserved
    system 00:06: ioport range 0x2180-0x218f has been reserved
    system 00:06: ioport range 0x398-0x399 has been reserved
    PCI: Bus 1, cardbus bridge: 0000:00:0a.0
      IO window: 0x00001800-0x000018ff
      IO window: 0x00001c00-0x00001cff
      PREFETCH window: 0x10000000-0x13ffffff
      MEM window: 0x14000000-0x17ffffff
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 540k freed
    Simple Boot Flag at 0x40 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 371
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:09.0: Boot video device
    isapnp: Scanning for PnP cards...
    Switched to high resolution mode on CPU 0
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:08: activated
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUS] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    No dock devices found.
    input: AT Translated Set 2 keyboard as /class/input/input1
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1040 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1048 irq 15
    ata1.00: ATA-5: HITACHI_DK23CA-10, 00H5A0G1, max UDMA/100
    ata1.00: 19640880 sectors, multi 16: LBA
    ata1.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access     ATA      HITACHI_DK23CA-1 00H5 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 19640880 512-byte hardware sectors (10056 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    ReiserFS: sda8: found reiserfs format "3.6" with standard journal
    ReiserFS: sda8: using ordered data mode
    ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda8: checking transaction log (sda8)
    ReiserFS: sda8: Using r5 hash to sort names
    rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
    es1938: OPL3 not detected at 0x1090
    gameport: ES1938 is pci0000:00:0b.0/gameport0, io 0x10a0, speed 1084kHz
    ACPI: EC: GPE storm detected, disabling EC GPE
    ACPI: AC Adapter [ACAD] (on-line)
    ACPI: Battery Slot [BAT1] (battery absent)
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Sleep Button (CM) as /class/input/input3
    ACPI: Sleep Button (CM) [SBTN]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    ACPI: Transitioning device [FAN] to D3
    ACPI: PNP0C0B:00 is registered as cooling_device0
    ACPI: Fan [FAN] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: ACPI0007:00 is registered as cooling_device1
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (64 C)
    Marking TSC unstable due to: TSC halts in idle.
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    input: PC Speaker as /class/input/input5
    Yenta: CardBus bridge found at 0000:00:0a.0 [1014:019a]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1272, devctl 0x64
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000010
    pccard: PCMCIA card inserted into slot 0
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    PPP generic driver version 2.4.2
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    input: ImPS/2 Generic Wheel Mouse as /class/input/input6
    NET: Registered protocol family 23
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 11, io base 0x00001060
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: memory probe 0xa0000000-0xa0ffffff: clean.
    pcmcia: registering new device pcmcia0.0
    lp: driver loaded but no devices found
    eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:26:5c:d8:21
    nsc-ircc 00:09: can't evaluate _CRS: 12321
    nsc-ircc 00:09: activation failed
    nsc-ircc: probe of 00:09 failed with error -5
    nsc-ircc, Found chip at base=0x398
    nsc-ircc, Wrong chip version ff
    ppdev: user-space parallel port driver
    parport_pc 00:07: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    lp0: using parport0 (interrupt-driven).
    Clocksource tsc unstable (delta = -77266143 ns)
    Adding 200772k swap on /dev/sda7.  Priority:-1 extents:1 across:200772k
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present
    tun: Universal TUN/TAP device driver, 1.6
    tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
    tun0: Disabled Privacy Extensions
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi2 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    scsi 2:0:0:0: Direct-Access              USB DISK 28X     PMAP PQ: 0 ANSI: 0 CCS
    sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sd 2:0:0:0: [sdb] 4030464 512-byte hardware sectors (2064 MB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    usb-storage: device scan complete
    /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="yes"
    TIMEZONE="Asia/Saigon"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(8390 pcnet_cs slhc pcnet_cs snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-hwdep snd-page-alloc snd-pcm snd-rawmidi snd-timer snd snd-mpu401-uart snd-opl3-lib snd-es1938 soundcore)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="fang.ntu.edu.vn"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    #   - no hyphens in your interface names - Bash doesn't like it
    # DHCP:     Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
    INTERFACES=(eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.1.1"
    ROUTES=(gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up (dialog package required)
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network netfs crond)

    hi!
    did you read this?
    http://tascam.com/i-414-232-128-0-4A15AD91.pdf
    can be found here: http://tascam.com/products/fireone;9,14,104,19.html
    regards,
    m.

  • Make a audio controller file move with a pan and zoom.

    I am using a few folio overlays for a digital publication.
    I have an image that uses the pan and zoom overlay.
    I would like to add several play buttons for audio that are linked to the image so when you pan the image the audio files move with it.
    So far I can only get the audio controller file to be static and the image move under it.

    Here's a little trick for you. Before creating a scrolling frame, group the
    text frame with a small no fill/no stroke frame. Now you have group in the
    frame, you can drag additional objects in using the layers panel.

  • 10.4.10 Audio Popping Issues: Information Check with Internal Speakers

    For people with internal speakers, or those without subwoofers: Please read all the way to the bottom to find a test that will determine whether you are also having audio problems, even if you can't hear pops.
    We've had a lot of discussion about audio popping due to 10.4.10, and the evidence indicates that the audio circuitry is going to sleep to conserve power, even on AC-only computers like the iMac, Mac Mini, and (at least one) Mac Pro. Some people claim to not have this problem, but I'm wondering if they just aren't noticing it.
    Having external speakers with a subwoofer, set to high amplification, are key to obvious detection of the problem. Let the sound subsystem go idle for 30+ seconds (wait a minute with no audio, just to be safe), turn up your external speakers really loud, and cause the computer to make a sound. You should hear a burst before the sound plays. If you repeat the sound, you won't hear the burst. This is the sound of the audio circuitry powering on, and the speakers are amplifying it.
    About 30 seconds after the sound finishes playing, if you leave the volume of your speakers turned way up, you should hear a "pop" as the circuitry is powered off. Then, playing another sound will recreate the burst.
    I haven't been able to hear these sounds with internal speakers, either on the Mini or iMac. But the problem still exists, and it is detectable... if you know what you are looking for.
    The burst of the audio circuitry turning on also causes a delay in the audio. The delay is a noticeable fraction of a second, an it can easily be detected if you have a repeatable source of sound. I like Terminal.app, because I use that application all day, every day. Here is how you can check to see if you are also subject to the audio problems:
    1. Start Terminal.app (in the /Applications/Utilities directory).
    2. Wait one minute for the audio circuitry to shut down.
    3. Without typing anything else, very quickly strike and release the Backspace key.
    4. If you pressed the key all the way, the program should have caused a beep. However, if the audio circuitry goes to sleep, the beep should occur after you have moved your hand off the key. This is because the circuitry takes time to power itself on before playing the sound.
    5. Now, quickly strike the Backspace key again. You should notice that the sound is produced immediately as you hit the key, without the delay you just witnessed.
    6. Strike the Backspace key repeatedly, to confirm that there is no audio delay. Do this about once every second or two. If you press the key too rapidly, not all of the presses will produce sounds... this behavior is not related to the issue we are testing.
    7. Wait another minute for the audio circuitry to shut down, and strike the Backspace key once more. You should again observe a delay between your strike and the sound production.
    If you witness delays like this, your audio circuitry is also going to sleep, and you are having the same audio problems as the rest of us. However, either because you are using internal speakers, or because your external speakers don't have the appropriate response, you aren't hearing the same bursts and pops as the rest of us.
    Please try this test, and report here. I want to build a list of people who previously couldn't hear the sounds, but still have the delay. This might give us a better picture of the scope of the problem.

    Re: 10.4.10 Audio Popping Issues: Information Check with Internal Speakers
    Your analysis of what is happening is right on.
    The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
    Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
    Quite annoying.
    Here's what I sent to Apple tech support:
    Guys/Gals (OS X Engineers):
    Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
    Please. Just do the right thing and fix the audio.
    There is no need to power cycle the audio subsystem to save .0005 amps on your laptops.
    And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
    Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
    Crikey!
    Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM   Mac OS X (10.4.9)   20 Years of Microsoft-Induced Grey Hair

  • Playback pauses and audio sync issues with live video stream

    I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player.  It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams.  It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
    The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
    I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux.  I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
    To see the stream with the Akamai player, go to:  http://live.kulabyte.com
    To see the stream with the OSMF/Strobe player, go to:  http://live.kulabyte.com/osmf
    I do not have JW set up for public viewing yet, but the two above show the distinct difference.
    We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
    If someone has ideas on debugging I can PM the actual video assets to you.
    Thanks,
    Tim

    Hi Tim,
    You need to add this setting:
    dynamicStreamBufferTime=8
    The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
    I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
    Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
    https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
    Looking forward to your confirmation that this solved your issue.
    -Andrian

  • Multiedia audio controller not working HELP!!!!!!!!

    upgraded to win 2000 lost drivers to my multimedia audio controller (no drivers) I believe the model number is sc0209 but how do I get the right drivers to make my sound work again? New at this but
    trying to find drivers to get my sound working.

    Pugdad,
    The model number for the sound card is located on the PCB circuit board itself. It should be printed something like CT**** or SB****.
    Jason

  • No sound on Intel Corporation Lynx Point-LP HD Audio Controller

    I've just installed Arch on a Dell Vostro 5470 (there's nothing on it's wiki page about sound). alsamixer shows only S/PDIF, S/PDIF 2, S/PDIF 3, which can' t be changed.
    # aplay /usr/share/sounds/alsa/Front_Center.wav
    ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
    aplay: main:722: audio open error: No such file or directory
    # lspci | grep Audio
    00:03.0 Audio device: Intel Corporation Device 0a0c (rev 09)
    00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller (rev 04)
    # lspci | grep Realtek
    02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5227 (rev 01)
    07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
    # lsmod | grep snd
    snd_hda_codec_hdmi 36588 1
    snd_hda_codec_realtek 46566 1
    snd_hda_codec_generic 53211 1 snd_hda_codec_realtek
    snd_hda_intel 37704 0
    snd_hda_codec 99871 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
    snd_hwdep 6332 1 snd_hda_codec
    snd_pcm 79815 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    snd 59286 8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    soundcore 5418 1 snd
    # dmesg | grep sound
    [ 1.283600] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
    [ 2.908502] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
    [ 2.908644] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
    [ 2.908706] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
    # dmesg | grep snd
    [ 1.247738] snd_hda_intel 0000:00:1b.0: irq 60 for MSI/MSI-X
    [ 2.896945] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X

    Reread your own post. You have two cards using snd-hda-intel module, use vid and pid to set PCH as default. Step by step on wiki.
    Edit: I took the PCH name from your 'dmesg | grep sound', people usually post 'aplay -l', but to determine the id one can also use:
    cat /proc/asound/card*/id
    The output of that should produce in your case:
    HDMI
    PCH
    PCH is your analog output, HDMI is your digital output though graphics card. By reordering modules, PCH with be your default (first on the list). If you only use alsa, you can also use other methods described on the wiki, this method is recommended however, because when you choose to use a sound server like pulseaudio, it will not cause any additional problems.
    Last edited by emeres (2014-04-26 14:12:41)

  • Flv audio sync issues & player 9

    Greetings, I've been looking for a solution for weeks, and
    thought I'd give the forums a shot.
    I have a client site with 6 progressively downloaded flv
    clips that play when a button is clicked.
    The flv files are encoded with After Effects 6.5, and the swf
    files are published in Player 8.
    The video clips are made with an alpha channel of a guy
    talking and are about 30 sec to 1 minute long each.
    The problem is audio sync issues on certain computers during
    playback even when the files are completely buffered.
    The other problem is that these flv files won't play on
    computers that have player 9 loaded.
    I'm investigating whether there are audio sync issues when
    encoding flv files from AE 6.5, but still really
    confused about the player 9 issue. I was wondering if there
    are updates to 9 I can recommend to my client
    or if adobe knows of any bugs that are currently being looked
    into.
    Thanks,
    Kevin

    I may just be talking to myself here, but...
    Could there be any difference in the way an flv plays when
    you
    import the flv to the stage, as opposed to playing it
    dynamically
    using the NetStream class? Could this cause any audio sync
    issues? Does Flash Player 9 have any difficulties displaying
    flv files loaded dynamically?
    Any ideas from Adobe folks would be great. Thanks.

  • Quicktime audio sync issues

    Hello,
    I have quicktime version 10 (128).   I can't get anything to play in it without there being severe audio sync issues every time.  I can't figure out why.  Can someone please help me fix this problem? 
    When I export my movies from imovie to quicktime it will play in quicktime, properly and without sync issues, for a really short period of time - seconds.  But after that, the audio no longer matches the video.   I know it's an issue in QT because when I upload the video to YouTube there are no audio sync issues whatsoever.
    Help?
    Thank you so much,
    YahYah

    I am dissapointed to see that no one has addressed this issue. I have similar issues.
    The MP4's play perfectly in the quicktime player but in Premiere they are off by varying degrees sometimes up to a minute even. I had similar problems in the past with files from the same producer. However last time I was able to  change the extension before importing and then sync them up manually on the timeline. It worked everytime. This time however when I change the extension Premiere brings it in as an audio only file.

Maybe you are looking for