Audio Levels are completely different when exported from Premiere to Audition?

Hi all,
I'm hoping someone can help me out here. I've adjusted the audio gain and volume levels on an interview I'm editing and it sounds pretty darn good in Premiere Pro. I exported the sequence to Audacity to do some hiss removal but quickly realized everything is different. The volume levels are way to high on lots of my clips? Why is this? I cannot really work with it in this current state because it would mean re-doing lots of work I've already done in Premiere. Any one got any ideas?
All the best
Kevin 

Also, in the sequence the Edit in Audition option is greyed out? I can't round trip and work through the clips individually? Is there something I need to switch on or something?

Similar Messages

  • Audio and video not synchronized when exporting from Premiere Pro CS6

    Hi
    We have made a project in Adobe Premiere Pro CS6 that´s intended to be exported to DVD (it´s a weeding). We are working with NTSC DV Widescreen. The exporting is 720x480
    We have 2 audio lines activated and sounding on this project.
    The question is:
    When exporting the entire video (the entire timeline sequece) using Adobe Media Encoder to formats like H.264 (NTSC DV Widescreen)... Quick Tile Movie or AVI without compression (we tested these formats) the 2 audio channels get unsynchronized from the video. The same problem occurs if we get a direct link of the timeline from Premiere to Encore.
    And Inside Premiere Preview audio is preety correct.
    Does anyone here are getting such problem?
    Also..can I ask another question (as I´m not expert on video production)?. What´s the best format for our purpose? Export a video to be played to DVD (we record weedings, birthdays..social events). No problem the time to export. We´d like the best quality for output.
    Thank you for the help
    Gustavo.

    Hi John and techkid123
    We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
    We start a new project using the Standard NTSC Widescreen 48Khz format.  When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
    But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
    We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
    Thank you a lot for the help
    Gustavo.

  • Why are files going offline when exporting from premiere

    Hi all
    I've got a feature length documentary of 2 hours. All files are online but upon exporting from premiere via media encoder the finished file has 'media offline' on some shots. I have NO idea why this is happening. All clips are online on the timeline.
    I'm exporting both blu-ray mpeg and dvd mpeg. The project is on an external hard drive. Can anyone help this is a nightmare!?
    Will exporting via premiere pro direct fix this problem?
    Thanks

    Can't you see how the video is pixelated? Mainly around the nose and forehead?
    Nope.  Looks fine when I watch it.

  • Media Encoder crashes when exporting from Premiere Pro

    Media Encoder crashes when exporting from Premiere Pro. I am queueing multiple files for export and Media Encoder will crash. The computer system has 32GB of RAM and the videos export fine in Premiere, but that requires exporting each one individually. Each video file is being down converted and some can be quite long (upwards of 3-5 hours). Nothing else is running on the computer that would take up memory.
    Any idea why Media Encoder will crash?

    Try turning off GPU acceleration.

  • Losing audio quality when exporting from premiere pro

    I have now had this happen with two different videos. I play the video in premiere pro and the audio is fine. I export the video and lose most of the quality of the audio portion. One project is a music session when exported I only get the main vocal the drums aren't audible only a buzz sound is made where the kick drum would usually come in. On another project is a thank you video for a family member and the audio is distorted after being exported. The audio sounds fine inside of the session. Once exported the audio will still work fine on my computer and my iphone 5s as long as I'm wearing headphones, once I try to play the video through my iphone 5s speakers the audio quality is gone, making the noises as previously stated. My iphone can still play other tracks fine but videos and audio exported from Premiere Pro are distorted. Any advice on how I can export the video so I wont lose audio quality when playing the video on an iphone? I know it's not my iphone speakers, they play other songs just fine.

    The source files as far as the audio goes are wav files that I've pulled off of my desktop. My sequence settings are 1920 by 1080 at 29.97 frames per second. The export settings are H.264 with the preset YouTube (HD 1080 29.97 FPS) and I've also tried HD video 1080p 29.97 FPS. If this isn't enough information please let me know I'm in the learning phase. Audio wise the quality is set to high and I'm exporting at 4800 kh and a bit rate of 190. I've also tried a bit rate of 320 and 264 I think it is and still had the same problems.  Let me know if I need to do screen shots I really want to figure this out.
    Thanks for your help!

  • Controlling level of JPEG compression when exporting from iPhoto 6?

    Hi all,
    I'm wondering whether one can adjust the level of JPEG compression when exporting images?
    I'm still on iPhoto 4 that unfortunately doesn't offer this option and by default produces fairly large images that aren't well suited for web presentations.
    I'd be happy to upgrade to iPhoto 6 for that feature alone.
    Cheers Martin

    HI Martin,
    There is no compression option in the File>export window. You can however input size dimensions so a 2592x1944 can be exported to any 4x3 value such as 800x600

  • Why is my video pixelated when exporting from Premiere Pro?

    Hi,
    I'm a musician wanting to make some basic videos for YouTube. The videos will consist of an intro (logo, title etc) and audio playing over a still image which will last the duration of the song. I've edited the still image for the video within Photoshop (CS5.1). The image is of a woman screaming and is intentionally very dark. When I export this image from Photoshop, the quality is excellent. When I then import this image into Premiere Pro (CS5.5) and export as the finished video, the quality of the image is significantly reduced and is rather pixelated. After spending hours searching online and trying different settings to achieve the result I want, I've had no luck, and I'm now in desperate need of a professional opinion. Is it possible to get the same quality image within the exported video as I get from an exported Photoshop file?
    Things I've tried:http://www.ashmathos.com/Musici
    Photoshop - Exporting image using different file types - .tif , .PNG , .PSD  etc
    Premiere Pro - Exporting video using different formats - .FLV , Quicktime and MPEG4
                        - Changing the Capture format between DV and HDV
                        - Different presets - AVCHD, HDV, DV - PAL/NTSC etc
    Both the image exported from Photoshop and the video are 1080p (square pixels)
    An example of what I've explained can be found here:
    http://www.ashmathos.com/Musician/Test
    (The video can be found below the image)
    To any responders,
    Thank you!

    Can't you see how the video is pixelated? Mainly around the nose and forehead?
    Nope.  Looks fine when I watch it.

  • Is there a way to set a default "Source Range" in AME when exporting from Premiere Pro CC?

    When exporting a sequence from Premiere Pro CC, you are able to toggle between 4 drop down options within Adobe Media Encoder on what Source Range you'd like to export (Work Area, Sequence In/Out, Entire Sequence, Custom) as seen here:
    Is there a way to set the default Source Range to something besides Sequence In/Out?
    My reason for asking is that sometimes I export multiple sequences at once using AME's Queue. I add my custom presets to each Sequence and hit export, but SOMETIMES I may have accidentally marked an in point on my timeline and by default it's set to export only that In-to-Out part of the sequence.
    I know what you may be thinking...well, just don't add any In/Out points to your sequence on the timeline or clear them first. The trouble is that I often don't see them or catch them when working quickly. In Premiere Pro CC, I use the "Lighter Brightness" Appearance setting because it's easier on my eyes after editing 10 hours a day, 6 days a week. Sure, darker looks cooler, but it kills my eyes for some reason. Anyway, PPro CC has a troublesome appearance issue in CC where it's not "optimized" for editing when you change it to a lighter appearance like it was in CS6. I've already contacted Adobe about this and another appearance issue (involving highlighted clips when in Lighter Appearance setting) and they are "actively working on fixing this appearance issue asap". 
    For reference, here's Premiere Pro CC in/out points in default dark appearance (notice the slightly lighter grey area):
    Now here's that same in/out in "Lighter Appearance":
    Not exactly optimized. Can hardly see it. Good luck spotting that little guy on a long timeline. Sadly, this affects in/out points in the Source Window as well. Really hard to see.
    Conversly, CS6 looked the best (the blue REALLY stands out making things easy to see):
    So my question again...is there a way to set the default "Source Range" to something else besides Sequence In/Out so that I don't end up doing what I just did and leaving for several hours while batch exporting only to come back and find that I exported only a "portion" of one of my big sequences?
    Thank you!

    shooternz wrote:
    Here is the solution:  Slow down. Give your project some love. Smell the roses.
    Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
    shooternz wrote:
    Then it would not be a default...it would be an option and you already have that option.
    Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

  • I need some help when exporting from premiere, my audio will not export.

    I am editing a vosot, I have a voiceover track and an interview track. When I play the project back, both are there and play fine, however when I go to export it, there is no audio.
    I really need help ASAP! Thank you.

    Firmware is basically the internal OS (operating system) software in which your iPod runs on.
    A "Firmware update" can be found in iTunes (if you aren't updated to the latest version of internal software for your iPod), which updates your iPod's OS (operating system).
    New firmware update versions usually do not make a noticable change on your iPod, unless the last firmware update contained a bug, where is slowed your iPod down, for example, and the new firmware is tweaked from the last version, and doesn't slow down your iPod anymore.
    Also, iTunes and your computer will call a firmware update/software the "firmware files", because a computer will read what an update contains, by how its files are... just another bit of info.
    I hope that explains it.
    -Kylene
    If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

  • Why is video size different to original when exporting from Premiere Pro CS6 to Encore?

    Hi there
    My source files in Premiere Pro are 1920 x 1080.
    When I export the sequence to Encore to burn to a DVD the size in the burned DVD changes to 720 x 576
    In Encore project area I have these two entries
    The encoding settings for the above two entries are
    this (for the first entry above)...
    and this (for the second entry above)...
    It does not seem to be possible to change the encoding to 1920 x 1080 for the first enry and as such the video is being burned as 720x576.
    How can I fix this? What am I doing wrong?

    DVD is 720x576 you cannot change that.
    If you want 1920x1080 which is HD you need to make a BluRay.
    You can however make an AVCHD disk which is HD on DVD.
    About 20 minutes will fit on a DVD and will only (but not all) BluRay players.

  • Error when exporting from premiere pro CS6

    I have been using PP CS6 since launch date- and have had none stop problems with exporting, I cant dynamic link, add to render ques or simply export straight from PP!
    When i Que my project it will export up until half way and then freeze, i've tried changing the clip, removing effects, everything!
    has anyone encounted this problem before?
    This is happening with more then just this one project aswell.
    These are old projects that were originally created in CS5, could that be causing it?

    Thats what i thought!
    All earlier projects open, i can edit, manipulate it! do the works! However when it comes to export time! i can't export it to anything! whats the point?!?!
    Im really angry, when you pay for something you expect it to do what it was designed to do! and the fact i can't export at all is really really frustrating!

  • Black borders problew when exporting from Premiere CS4

    Buenos dias, komrads! Just a few days ago I found rather trivial trouble exporting video from Pemiere CS4. Here they are:
    A. shvi531.mp4: https://www.youtube.com/watch?v=x3L5Lr6VZBE
    Export settings:
    640x360 - Source video, 640x360 - Output video
    Source Crop settings. Left:55; Top:0; Right: 56; Bottom:0. Aspect ratio: 16:9
    Format: H.264
    Tv Standard: NTSC
    Widescreen 16:9
    Profile: High
    Level: 4.2
    VBR: 1 pass
    Target Bitrate: 25
    Keyframe: 5
    Output export settings: Black borders.
    B. shvi531_2withoutBorders.mp4: https://www.youtube.com/watch?v=uImumNAHON8
    Export settings:
    640x360 - Source video, 640x360 - Output video
    Source Crop settings. Left:55; Top:0; Right: 56; Bottom:0. Aspect ratio: 16:9
    Format: H.264
    Tv Standard: NTSC
    Widescreen 16:9
    Profile: High
    Level: 4.2
    VBR: 1 pass
    Target Bitrate: 25
    Keyframe: 5
    >>Attention<< Here is the quesition: How can I get the quality of the first video (A. shvi531.mp4) but without borders. Than this video go straight to youtube.
    Sea God bless you, guys! 
    P.S. I searched up this forum, but didn`t find the troubleshoot.
    With love from Dominican Republic, Ilya.

    Maybe try starting project with the same exact dimensions etc of your source footage and then export the same settings ? It's kinda tricky sometimes due to frame ratios ( 4:3, 16:9 etc ) and specs for ntsc or pal etc.. but if you use desktop custom settings you might be able to do what you want ...for youtube...
    I didnt look at the samples you posted cause of my security settings.
    good luck !

  • Anyone got any good AVCHD FOR DVD Presets they can share for AME CC Latest Version when exporting from Premiere Pro CC Latest Version?

    Just wondering if anyone has for download or can share some templates or settings that I can use to create a One Stop Encode that will suit both AVCHD HD DVD Disc and be good as a Computer MP4 File for PC and Android Mobile Playback and maybe even good enough for Full Bluray Mastering.
    Currently I am using mostly HDV 50i Material with a bit of 1080 30p and Mobile phone type MP4 files thrown in.
    I typically Encode to for DVD SD and HD BD. However I would like to be able to take advantage of putting some of the short HD Video to AVCHD DVD-R Discs.
    I understand that the maximum bit rate is gonna be 18mbs? for AVCHD on DVD but am unsure what Profile settings I need to be compliant and as I say if create a good one MP4 that will be good for all formats
    whether it be AVCHD DVD, Blu-ray Disc and good for YouTube uploading with possibility of compatibility with some of the Android Mobile Phones and Tablets.
    Thanks in Advance
    Phil

    shooternz wrote:
    Here is the solution:  Slow down. Give your project some love. Smell the roses.
    Agreed about the roses but alas my next project always calls. Actually, I think what happens is I give each project SO much love that when it comes to exporting, I've run out of time.
    shooternz wrote:
    Then it would not be a default...it would be an option and you already have that option.
    Semantics aside, I would love to be able to have it at least default to whatever option was last chosen. Or, perhaps I shouldn't use the word default again...I'd love it to simply remember my preferred setting. That's all.

  • Audio Levels Are Different within program

    For some reason when I am editing a multi-track project I seem to get three different levels as I go along.  When I am editing a single file the levels come out as one thing.  When I get the levels good, usually around -4 or so I play them back on the multi-track editor and I'm well up and over 0 into the red.  On top of that when I import back into the Final Cut all the levels are completely different wiht some being low and some behing higher than in Soundtrack Pro.  All level adjustments made in Final Cut were cleared out so any project I bring in doesn't have any level variations.
    Thanks!!

    Also, in the sequence the Edit in Audition option is greyed out? I can't round trip and work through the clips individually? Is there something I need to switch on or something?

  • Large PDF file sizes when exporting from InDesign

    Hi,
    I was wondering if anyone knew why some PDF file sizes are so large when exporting from ID.
    I create black and white user manuals with ID CS3. We post these online, so I try to get the file size down as much as possible.
    There is only one .psd image in each manual. The content does not have any photographs, just Illustrator .eps diagrams and line drawings. I am trying to figure out why some PDF file sizes are so large.
    Also, why the file sizes are so different.
    For example, I have one ID document that is 3MB.
    Exporting it at the smallest file size, the PDF file comes out at 2MB.
    Then I have another ID document that is 10MB.
    Exporting to PDF is 2MB (the same size as the smaller ID document)... this one has many more .eps's in it and a lot more pages.
    Then I have another one that the ID size is 8MB and the PDF is 6MBwhy is this one so much larger than the 10MB ID document?
    Any ideas on why this is happening and/or how I can reduce the file size.
    I've tried adjusting the export compression and other settings but that didn't work.
    I also tried to reduce them after the fact in Acrobat to see what would happen, but it doesn't reduce it all that much.
    Thanks for any help,
    Cathy

    > Though, the sizes of the .eps's are only about 100K to 200K in size and they are linked, not embedded.
    But they're embedded in the PDF.
    > It's just strange though because our marketing department as an 80 page full color catalog that, when exported it is only 5MB. Their ID document uses many very large .tif files. So, I am leaning toward it being an .eps/.ai issue??
    Issue implies there's something wrong, but I think this is just the way
    it's supposed to work.
    Line drawings, while usually fairly compact, cannot be lossy compressed.
    The marketing department, though, may compress their very large TIFF
    files as much as they like (with a corresponding loss of quality). It's
    entirely possible to compress bitmaps to a smaller size than the
    drawings those bitmaps were made from. You could test this yourself.
    Just open a few of your EPS drawings in Photoshop, save as TIFF, place
    in ID, and try various downsampling schemes. If you downsample enough,
    you'll get the size of the PDF below a PDF that uses the same graphics
    as line drawing EPS files. But you may have to downsample them beyond
    recognition...
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

Maybe you are looking for