Autom. Gruppenamenzuweisen bei ASCIILoad

Hallo Zusammen,
ich lade mein ASCII-File mit dem Befehl ASCIILoad, dabei wird aber der Name von ASCII-File nicht automatisch in die Kanalgruppe zugewiesen(was mit DataFileLoad passiert). Hat jemand da eine Idee?
Eine generelle Frage, wo finde ich die Quelltexte von Befehlen? Weil ich denke wenn ich das finde kann, kann ich auch im Quelltext optimieren.
Grüße,
Andreas
Solved!
Go to Solution.

Hallo Andreas,
der Befehl ASCIILoad stammt noch aus den Anfängen von DIAdem und ist schon seit einigen Versionen durch die DataPlugins ersetzt worden. Das er in DIAdem immer noch funktioniert ist reine Kompatibilität.
Ein DataPlugin ist üblicher Weise ein kleines VBS-Script, das ein fremdes Format in das TDM.Model überführt.
Die einfachste Variante ein solches DataPlugin für ASCII Dateien zu erstellen ist der DataPlugin-Assistent, der im NAVIGATOR über das Menü Datei aufgerufen werden kann. Am Ende der geführten Konfiguration generiert er ein DataPlugin. Das funktioniert üblicher Weise wunderbar. Wenn man jedoch davon ausgeht das DataPlugin modifizieren zu wollen. empfehlen wir das DataPlugin direkt selbst zu erstellen, denn es ist nicht schwer. Infos hierzu gibt es auf der Web-Seite "ni.com/dataplugins". Dorf findet man auch alle schon existierenden DataPlugins, die kostenfrei zur Verfügung stehen.
Gruß
Walter

Similar Messages

  • Exe erstellen

    Hallo zusammen...
    Hab einige scripte geschrieben, die endlich machen was ich will. Nun hab ich eine Start-Funktion, der ich eine boolesche Variable übergebe, die entscheidet, ob ich einen Dialog starte oder direkt eine Auswertung starte. Nun würde ich gern eine batch-Datei oder ähnliches bauen, die diese Script startet. In dem batch müsste ne Abfrage stehen, ob DIAdem bereits offen ist und ob DIAdem gerade eine Auswertung durchführt.
    Ist sowas möglich? Ausweg wäre ein Script, das DIAdem startet und in DIAdem kann ich ja ein Script bestimmen, das beim Programmstart ausgeführt wird, dann fehlt mir aber immer noch die Abfrage ob die Software bereits in mache ist.
    Jemand Erfahrung?
    MfG Michael

    Hallo Michael!
    Vielleicht haben wir bisher etwas aneinander vorbei geredet. Ich helfe gerne weiter, muss nur alle Randbedingungen kennen damit die Vorschläge auch brauchbar sind. Kannst du also bitte vorweg nochmal dein Szenario in Stichpunkten beschreiben und welche Werkzeuge du verwendest (Java?).
    Allgemein vorweg die beiden Wege wie man DIAdem aufrufen kann:
    a) als EXE
    b) als OLE Automation Server
    Bei a) muss man zur Kommuinkation mit der Aufrufer sich etwas einfallen lassen. Input ist noch einfach, die Rückgabe muss über Datei/Registry/etc. erfolgen. Ob DIAdem arbeitet oder rmit einer Box (ggf. Fehlerbox) steht kann man von Aussen nicht abfragen.
    Bei b) muss zuerstmal der Aufrufer in der Lage sein Automation Server zu erzeugen (CreateObject in VBS). Geht das kann man DIAdem Variablen lesen/schreiben und Befehle synchron/asynchron absetzen. Das ist recht flexibel für Input und Rückgabe. Läuft kein DIAdem wird von Windows automatisch eines gestartet (mit Grundeinstellungen aus der Registry). Läuft bereits eines verbindet man sich mit diesem (DIAdem Default Einstellung, kann aber auch anders eingestellt werden). Bei mehreren laufenden DIAdems ist es zufällig welches man 'erwischt'.
    Mehr Hilfe wenn mir die Randbedinungne klar sind.
    Matthias
    Matthias Alleweldt
    Project Engineer / Projektingenieur
    Twigeater?  

  • Fehler bei autom. Achsenskalierung

    Hallo zusammen,
    wir habe ein Problem bei der automatischen Skalierung von Diagrammen.
    Wenn bei den Kurven ein einzelner Punkt enthalten ist, wird die Y-Achse nicht autom. skaliert.
    Zum besseren Verständnis habe ich einen Beispieldatensatz angehängt. Im unteren Diagramm ist die erste Kurve (Einzelpunkt) ausgeblendet und das Diagramm wird skaliert wie erwartet.
    Ich habe es unter DIAdem 2014 und 2012 SP1b getestet, das Ergebnis ist immer dasselbe.
    Vielen Dank für Eure Hilfe,
    Elmar
    Solved!
    Go to Solution.
    Attachments:
    FehlerSkalierung.zip ‏14 KB

    Hallo Elmar,
    vielen Dank für die Info. Das Problem ist reproduzierbar. Ich habe einen Datenbankeintrag erstellt, damit wir das fixen können.
    Als Work-Around kann ich nur empfehlen einen Kanal mit mehreren Werten als ersten Eintrag zu definieren.
    Gruß
    Walter

  • Bei IOS7 in Einstellg. Safari Kennwört.&Autom. ausf. Ges. Kennwört. sind alle sichtbar. Wie löschen?

    Hallo zusammen,
    bei IOS7 (Iphone und IPad!) in Einstellg.>Safari>Kennwörter&Automatisch ausfüllen>Gesicherte Kennwörter sind alle Passwörter klar sichtbar. Mit "Bearbeiten" und "löschen" lässt sich nichts ausrichten - beim nächsten Öffnen ist alles wieder da. Wie kann ich die PW unsichtbar machen bzw. das komplett verhindern? Habe bereits alles mögliche versucht ...
    Danke und viele Grüße
    federhalter

    Das iPad ist wirklich ein Einzelbenutzer-Gerät. Wenn Sie einen Vorschlag an Apple zu diesem Bereich verwenden möchten:
    http://www.apple.com/feedback/ipad.html
    Beachten Sie, dass obwohl das vorherige iOS nicht Ihnen die Möglichkeit geben, siehe/Passwörter bearbeiten sie noch könnten von jedem Benutzer das iPad verwendet werden den Zugriff auf Websites, denen sie auf anwenden.
    Translation powered by Bing Translator

  • Auslesen Messwerte bei Counter 53131 von Agilent führt zu Ergebnis 0

    Hallo!
    Wir benutzen LabVIEW zur Ansteuerung unserer Testplätze, die standardmässig eine Data Acquisition Unit 34970 von Agilent enthalten und je nachdem weitere Geräte (Speisungen, Generatoren, Scopes etc). Es sind gegen 20 Testplätze, die jeweils projektspezifisch für das zu testende Los aufgebaut werden. Alle Testplätze enthalten die LabVIEW Runtime Engine plus die zugehörigen Treiber.
    Im konkreten Fall haben wir ein Problem mit dem Ansteuern/Auslesen des Counters 53131A von Agilent: Bei einigen Testplätzen funktioniert's problemlos, bei einem Testplatz gar nicht. Dieser PC hat eine GPIB-Karte von NI eingebaut. Bei den meisten anderen Plätzen haben wir den USB-GPIB-Converter 82357 angeschlossen. Ich kann nur die "einfachen" Befehle wie Reset und Selftest ausführen resp. jedes Zurücklesen eines Messwertes liefert 0. Auf einem anderen PC funktioniert dasselbe Testequipment mit dem selben Testprogramm problemlos.
    Sind irgendwelche Einstellungen im MAX nötig, damit sich die GPIB-Karte (183617G) "richtig" verhält?
    Wir benutzen die Instrumenten-VIs Read Measurement.vi der Library Agilent 5313X Series.
    Besten Dank für die Hilfe!
    Mit freundlichen Grüssen
    Silvio

    Hi! As suggested from GerdW now in english..
    We use LabVIEW to control our testequipment, usually containing a data acquisition unit 34970 from Agilent and if needed supplies, generators, counter and scopes. We have about 20 test stations in the test laboratory. On all computers we have installed the Agilent IO Libraries, the LV Runtime Engine 8.2.1 and the LV Runtime Engine 2010 plus the needed drivers.
    One special "feature" we have with the counter 53131A from Agilent:
    On some computers it always works troubleless, on others I had to send the first "MEASURE" command twice to get a result <>0.
    On one computer I always get a result of 0! This computer has a GPIB-card from NI built in. Most of the other computers use a Agilent USB to GPIB converter 82357 for the communication between computer and GPIB devices. Only the "basic" commands as Reset or Selftest work correct.
    I use the same testequipment/testprogram/DUT on another computer and everthing works fine.
    Do I have to make some modifications in the Measurement&Automation Explorer? We use the GPIB card 183617G.
    We use the "Read Measurement.vi" of the Library Agilent 5313X Series.
    Thanks in advance!
    Best regards
    Silvio

  • Unable to capture startup and shutdown event of Photoshop in automation Plugin.

    Hi,
    I am creating an automation plugin and I want to register some events. I have seen listener plugin sample to register event in startup and unregister event in shutdown. I have used same code in my plugin but I am unable to capture the startup nad shutdown event of Photoshop. On clicking the menu item of my plugin the calls come inside the AutoPluginMain but during the startup or shutdown of plugin, the calls does not come inside the AutoPluginMain.
    I am unable to detect the cause of the problem. Can someone please giude me??
    Thanks in advance.

    Hi Tom,
    Thanks for the suggestion.
    Yes, I am working on Windows. As you suggested, I compiled .rc file but the compile option for .r file was disabled. After compiling the .rc file, I again rebuild the complete project and tested my build. But still I was not able to achive the desired result.
    Any other thing that I need to do to make it work?
    Thanks

  • How to resize and change the resolution of a batch of photos using Automator

    I searched for a long time tonight looking for the answer to this (seemingly) simple question:
    How do I use Automator to scale and change the resolution of a batch of images?
    It was not so simple.
    Links to this question:
    https://discussions.apple.com/message/12341246#12341246
    https://discussions.apple.com/message/12342026#12342026
    https://discussions.apple.com/message/5785047#5785047
    https://discussions.apple.com/message/1173358#1173358
    https://discussions.apple.com/message/5641853#5641853
    https://discussions.apple.com/message/3207516#3207516
    These are just the links on this site - I found them all over the place at MacRumors, Apple Tips, Mac Help, etc.
    You can actually manage this in Automator.
    Here are the steps that worked for me:
    Create an Automator APPLICATION - not a workflow (this is due to the way that I'm batch converting images - workflows might be ok for some cases)
    Step 1 is Copy Finder Items
    My flow inserts an SD card, opens the DCIM folder that my Nikon creates, selecting the images that I click (command + click to multi-select) and once I have the photos highlighted, I drag them onto this Automator App we're creating.
    <==  You'll have this guy soon!
    As a result - I want to copy the originals to my computer as step 1.  I don't touch the originals on the SD card (and cards are cheap so I tend to leave them on the cards as well)
    Step 2 is the Scale Images action - you can search the library for this and find it quickly.  For my part, I found that scaling images to about 38.8 percent of their size on the SD card is good for uploading to a blog.  Change this value to whatever you wish.
    Step 3 is Run Shell Script - and here is where we marry the brilliance found at this link with our script.If you have a hard time reading the text in the image, it is as follows:
    #bin/bash
    for f in "$@"
    do
         /usr/bin/sips -s dpiHeight 72.0 -s dpiWidth 72.0 $f
    done
    Save this application (I named mine "Format Photos")
    Place the application inside the target folder where you want the images to end up.  I do this because when I have the SD card window open, I can also open my "Photos" window and see my App sitting there.  I select my images as I mentioned and drag them on top of this app.  The app copies the originals and the conversions into the folder.
    NOTES: When you open a converted pic in Preview, you will see Resolution = 300 dpi if you go to Tools --> Adjust Size...  This reading is explained by another brilliant discussion as sips only touches the JFIF properties inside the file's MetaData.  However, if you look at the bottom of the Adjust Size... window, you'll see the image size is probably around 500 kb (give or take depending on the original).  My goal was to get the images down from the 3.0 MB I shoot at to around 500 kb.  Therefore even though the MetaData still thinks that it is 300 DPI according to Preview, it has been changed to 72 (open it in some other applications mentioned at the links and you'll find different readings - it all depends on what the application reads from the Meta).
    This does not rename the files, so you'll get DSC_1000.jpg and DSC_1000 copy.jpg in all likelihood.  If that annoys you, add a step into the Automator Application that renames the file after the "Run Shell Script" action has run, and you can have each file renamed according to some convention that you like.
    This took a heck of a lot longer than I expected - so I decided to put in the effort to share this with the community and save others the hassle. 

    PPI is pixels per inch of the image.  It is difficult to increase resolution as you are trying to add data that is not there.
    But for printing purposes what you want is dpi or dots per inch.
    The image processor either accessed from Bridge (tools/photoshp) or PS is a good way to change a batch of images.

  • A tree-view in HTML page with nodes generated with java script in run time is not visible in the UI Automation Tree. Need Help

    I have a HTML page with an IFrame. Inside the Iframe there is a table with a tree view
    <iframe>
    <table>
    <tr>
    <td>
    <treeview id="tv1"></treeview>
    </td>
    </tr>
    </table>
    </iframe>
    In UIA, i am able to traverse till the tree view but not able to see it.
    I have used the TreeWalker.RawViewWalker Field to traverse the node from the desktop Automation.RootElement. 
    I tried to use AutomationElement.FromPoint method to check whether i am able to get that element. Fortunately i was able to get the automation element. 
    i tried to get the path to root element from the node element using the TreeWalker.RawViewWalker. I was able to get the parent path to the root element.
    But trying the reverse way like navigating from root element to tree node, was not getting the element for me. 
    Please help me with suggestions or inputs to resolve this issue. 

    Thanks Bernard,
    It works fine with JInitiator but not working with
    the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
    i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
    Thx and Regards
    dkklau

  • Error while invoking a automated activity

    Hello,
    I don't know whether this is the correct quesiton to this forum but since I am getting error in NW BPM process, I am writing it here.
    I have created a process which is getting triggered by WS call. The first step after start is automated activity where a call to SAP is made via a sync proxy.
    When I tried to execute the entire BPM process, I am getting the error in BPM Logs as
    "A technical error during invocation: Could not invoke service reference name
    eb7cf84e-f05c-41c4-940a-8f95113179f3, component name
    example.org~<DC Name>~BPMcomponent"
    Actually 2 things I did as a part of correction, the first is to set the communicaiton protocol is XI in the service reference of an outbound service interface that is used to call SAP system and change the interface pattern of its inbound interface to XI3.0 compatible. as suggested by Udo Martens in one of his blog. Also the inbound interface in the start step is of XI3.0 compatible.
    I re-deployed the project which I verified by going through NWA logs and also checked the configuration as given in blog. I have collaboration agreement done in PI where Sender is SOAP communication channel with XI protocol and it is as per the sender defined into the service reference.
    Sending a message from SAP NetWeaver BPM process to PI fails via automated activity - Technology Troubleshooting Guide -…
    Also I read one thread where it was resolved by clearing JCO caches but it seems the call was RFC call unlike in my case it is proxy call.
    "Could not invoke service reference" for automated activity (RFC call)
    Any clue what could have went wrong. I could see a cache issue here. But how to clear BPM cache.I couldn't find such option on NWA.
    Thanks in advance.
    Regards

    Hi Ameet,
    I'm facing same error,
    Could you  tell me how to apply the solution? Please.
    Thanks in advantage,
    Regards.

  • Error: Automation Error while creating a new app

    Hello Experts,
    Have installed FDM on one of our servers and trying to create a new application.
    Getting the following Error:
    Error: Automation Error. The System cannot find the file specified.
    We are using Oracle OLE DB Provider.
    Kindly Advise.
    Edited by: user7313376 on Apr 16, 2009 12:23 PM

    Check the path of the application and if its installed on server,pl check whether you have access to that path.
    If not get full access.

  • How do I create an automator task to run TimeMachine at only certain hours?

    Hi
    In another forum it was suggested I make an Automator task for setting TimeMachine to only run at certain hours of the day.
    I've not used Automator in the past.
    I'd like to set it to run TimeMachine from only 1AM to 7 AM.
    Can anyone point me to a good source to figure out how to do this?  Or just share with me how to write the task?
    Thanks

    You might look at this program.
    TimeMachineEditor - Time Software - Free

  • Automated Tasks in Photoshop or using Adobe Bridge

    I have recently transfered to CS3 and am having problems using the automated tasks. Normally with CS2 i would select pictures in bridge and then hit the Tools-Photoshop-Image Processor to switch over a series of files from one format to another. When I try to do the same thing with CS3 nothing happens, the photoshop screen comes up empty and i do not get the image processor message. I would appreciate any advice. thanks
    R. Silveston
    ps: I am using a pc

    Try asking in the PS Elements forum.
    http://forums.adobe.com/community/photoshop_elements

  • Photoshop CC 2014   Bridge CC: automated tasks missing

    I Have downloaded the new Photoshop CC 2014 and updated to Bridge CC. I am no longer able to run automated tasks from Bridge in Photoshop because the "photoshop" submenu is no longer available under tools… unistalling en reinstalling brings no avail. I'm now back to Photoshop CS6 and Bridge CS6… I just would like to know: Am I doing something wrong or is this a bug that hopefully will soon get fixed?

    Please post queries regarding Adobe Bridge over at
    Bridge General Discussion

  • Can not find the Automation Folder.... neither its Key Command...HELP

    I would be grateful to anyone who could find a solution to the following issue:
    I have read in Logic's 7.2.3 help reference about track automation folder. The sort of arrange window that seems to lurk behind the main arrange page and the place where you can treat the automation data as proper region material. I have tried everything, .. there does not seem to be any key command of the sort, more over I can not find any other way that could give me access to such an editor like the Automation Folder.
    Thank you for reading this.
    Nik

    • 1 • If you choose 'New Track' from the Menu, or use Control-Click-&-hold, you can select from the various options.
    • 2 • No, you don't need to do anything — it's entirely voluntary… I feel guilty for even mentioning it… I just thought that since you seem to be genuinely grateful for the help you have been getting, you had probably not read the article fully. I see that you have just had a useful reply from John Alcock, so now's your chance!

  • O aplicativo de rádio presente no Firefox OS, senti a falta de diversos recursos como gravação de rádio, personalizar lista de rádio e busca automática?

    Existe muitos aplicativos de rádio em aparelhos low-end com recursos básicos como busca automática de estações, gravação de rádio e edição de lista de estações que não estão presentes, a alguma previsão para esses recursos se tornarem disponíveis?

    Realmente nessas primeiras versões muitos recursos "básicos" não existem ou se existem são muito fracos ainda, mas por hora o que podemos fazer é esperar que em atualizações futuras hajam melhorias nos Apps.
    *[http://www.mozilla.org/en-US/firefox/os/notes/1.2/ Notas de Lançamento do FXOS 1.2]
    Se quiser ver atualizações em futuras versões:
    *[https://wiki.mozilla.org/B2G/Roadmap Futuras atualizações]

Maybe you are looking for