Automatic Determination of Item Tasks on PM Notification

Hello everyone,
I know using a Response Profile and Priority I can automatically determine tasks on a notification.  This only seems to work on standalone tasks.
My question – I have Items and Item Tasks on a notification – has anyone been successful in using a Response Profile and Priority to automatically determine tasks when the tasks are related to the item.  User exits or enhancements would be acceptable.
We are currently running:
Release 710      Final Release
File Version      7100.1.4.1029
Patch Level      4
Thanks in advance for any assistance

Hello Bill,
I am sorry to say that this is probably not possible the reason is that you have to create a QMSM set with reference to an item and if no item number is available then the correspondent task cannot be assigned. You could however check if the exit QQMA0006 could be used for this purpose. In this case I would analize how the structures VIQMFE VIQMSM and VIQMUR are filled when creating an item this may help in finding a solution.
Sorry that I cannot offer you a better solution.
Regards,
Isabelle

Similar Messages

  • Automatic determination of Item Category -3rd Party Process

    Hi Guru's,
    Can we set a material as a third party material for a particular customer?
    Say aaa,bbb customers, and material xxx.
    When i create a sale order for the customer aaa, material xxx should have the item category as TAN.
    But for the customer bbb, the item category should be TAS, which will be automatically come without any manual change in sale order...
    Is there any configuration related to this. i.e., by changing a customer item category should be changed?
    If we maintain a different order type for the customers, that time it will act as per my requirements..
    Is there any way other than this?

    hello, friend.
    determining item category using order type is your best bet (e.g. if doc type CMR and item category grp BANS, propose TAS; if doct type ZMR and item category grp BANS, propose ZTAN).
    if you do not wish this, my suggestion is to create a new sales distribution chain (sales org + distribution channel), and create your customer in this new sales area (chain + material division).  you then create the 3rd party material in the new distribution chain, and enter the item category group.
    let's say you have the following sales areas:
    sales org + dist chnl + divi
    1000 + 01 + 01
    1000 + 02 + 01
    you then create material in these 2 sales areas.  now let's say you have 2 customers:
    aaa - material shld have item cat TAN (create customer master in sales area 1000 + 01 + 01)
    bbb - material shld have item cat TAS (create customer master in sales area 1000 + 02 + 01)
    now create material in the 2 dist chains
    1000 + 01, item cat grp NORM
    1000 + 02, item cat grp BANS
    of course, this means more master data maintenance.  however, try this and see if this works for you.
    regards.

  • Complete the item task in notification

    Hi
    How to complete the item task in the notification.
    i check one notification which has the task as item task.
    i donot find the option to complete this task.

    Dear Raj
    I understand that you have already moved the stock to block. Now you have completed the notification. The reasong why it is showing lot accepted even though defects is because you have chosen UD code as accepted.
    Actualy the process when you have rejection is like this.
    Rejection
    1.     Defects found while inspection and result recording
    2                   Defect recording is done and result recording is saved. Notification is created automaticaly , add  tasks
    3                   Task released and completed
    4.     UD given as rejected and material moved to block stock
    5.     Create a rework order using Tcode Co01 order type (PP03) if any rework is to be done on the rejected material.
    6.     Rework done . Material to be tested again .Move the material back from block to quality using Tcode MB1B u2013 349 movement type (activate 08 inspection)
    7.     Inspection lot created
    8.     do the posting accordingly
    Regards
    gajesh

  • Quality Notifications - Items / tasks / activities / overview / causes / ..

    Hi PLM specialists,
    I do have a question concerning quality notification, type F2 - vendor error. I do get the following tabs: reference objects, subject, processing: that's clear.
    But there are also these tabs: items, tasks, activities. The tab items has the following subtabs: overview, causes, tasks and activities.
    Does anyone has an idea concerning their use and what is the difference between the subtabs tasks, activities and the tabs tasks and activities?
    Thanks!

    Dear Peter,
    The use of Item level Tasks and Header level task have been mentioned in SAP help.
    Basicaly Header level tasks are referred as "Immediate Tasks", These tasks provide a quick fix  for a problem  requiring immediate attentione and header level activities are referred as activities done immediately attend the same.
    Item level tasks are " Corrective Tasks". These tasks usually provide final solutions that wil prevent the problem for reccuring.
    For eg if you get a vendor rejection in your shop the immediate action will to intimate to the concerned person quickly and remove it to block location. So your immedite task can be of like 1) Communicate the production personnel 2) block the material 3) block the vendor 4) inform vendor and activities can be of like 1) email send to vendor 2) material moved to block 3)deliveries return back to vendor etc
    But as you know notification refers to a particular defect. So we need to take necessary corrective and preventive actions. SAP notification helps in doing this also. The item level entries are basicaly meant for this. In Item overview we can enter the defects that was noted on the material, you can maintain relevant causes for the same. Corrective tasks can be of like 1) Audit at vendors place 2) activation of source inspection 3) tighten the inspection standards and relevant activities done to achieve the tasks can also be maintained. This also helps in creating the 8D reports
    So a detailed analysis of the problem is dealt in the item level Cause, tasks & activities while immediate action get covered in the header datas.
    Hope this helps in clarifying your doubt
    Regards
    Gajesh

  • Creating Notification/Items/Tasks...etc

    Hey guys, i'm writing a program to create notifications/items/tasks...etc and i'm trying to use a couple of different bapi's to do such. Having difficulties get them to work properly. Not sure if its a parameter problem or what but could use some help. Does anyone have any experience with BAPI_SERVNOT_CREATE or BAPI_ALM_NOTIF_CREATE?
    I'm getting an error sometimes (Notification type S1 not defined)and other times it appears to create the notification however, no such notification exists in the service notifications (tn# iw53).
    Any help would be greatly appreciated. Thank you so much!
    -Shaunt

    Hi Shaunt,
    the BAPI for creating the service notification is actually pretty straightforward. I don't know about the errors you mention, but I guess I have an answer for your second problem.
    Try calling BAPI_SERVNOT_SAVE and then BAPI_TRANSACTION_COMMIT after calling BAPI_SERVNOT_CREATE and you should find the notification in IW53 (unless the first call to the BAPI returned any error messages.)
    Hope this helps, harald

  • Automatic determination of billing date on order related billing

    Dear all,
    Some background:
    We are using resource related billing: create standing sales order with WBS as reference.
    Costs are posted to the WBS (serves as a bucket to collect costs).
    Whenever needed, the costs on the WBS are billed. This is done via transaction DP91, creating a billing request for the standing sales order which generates a new sales order which takes the amount from the WBS element. This sales order can then be billed.
    In other words: Each period, the standing sales order can be billed (based on the WBS element it contains) in a new sales order.
    Problem:
    The billing date is derived from the 'requested delivery date' on the sales order.
    We would like to have by default proposed by the system as billing date: the date when the (2nd) sales order and/or billing document is generated. So either date of billing should be the billing date or the requested delivery date (which will then automatically determine the billing date)
    How can this be achieved?
    What I tried:
    1). I have ticket the flag "Propose delivery date", but this doesn't seem to be the solution.
    2). Factory calender is only to be used in case a specific date should be used (e.g. last day of the week/month). I don't think we need this, as we could just go for "todays date" during (2nd) sales order/billing document creation.
    3). I checked the copy control properties, but this is not really an option I think.
    Many thanks!

    HI, Boiler 
    I suggest you to check the copy control again.
    As I known, there is a Routin setting for data transfer (Data VBRK/VBRP) in the item level. And you can use standard routin 11 means Bill. date= Today.
    Hope it can help you.
    Wink Young

  • SD: Condition record not getting automatically determined

    Hi,
    Condition record not getting automatically determined for a condition type for which following access is maintained.
    The access has table containing following fields:
    Sales Organisation
    Distribution Channel
    Division
    Sales Document type
    Sales Document No.
    Material no.
    Following is the scenario:
    A sales order is created  for Project Systems attach a WBS element to the line item .
    With respect to the above created sales order a Billing request ( a sales doc. type which is different than the above sales order). When the billing request is created materials appearing in the line item will be different.Different materials will appear in the billing request because of the DIP profile maintained.
    The prerequisite is that before creating billing request the sales employee has to maintain condition master record with above access.The condition record will combine sales organisation, distribution channel, division, sales document type ,
    sales document number ( the 1st refered sales order)
    and the material are different
    than the ones maintained in the 1st sales order.
    This will enable in getting billing request generated without manual intervention in pricing for other materials for which condition records have been maintained as stated above.
    Following is the error message we get
    ===================================
    " Inactive        X   Inactive via formulae of incorrect "
    Thanks
    Aby
    Message was edited by: Aby Jacob Emmanuel

    As I know, thats just a warning message(if its a std one).
    Ignore it and save.
    Check your pricing date of the document. For execution it should be similar or after valid-from date maintain in condition record.
    But, you need not create a condition record. Simply change the existing one combination of your desire. But, this warning will come there also for your combination.
    Thanks & Regards
    JP

  • How to attach Task List in Notification

    Hi all
    How to attach Task List in Notification?
    Thanks.

    List item is forms is generally used when you have pre-defined set of values. you can define them property of list item.
    It seems you have dynamic list of values to be displayed on your form, instead go for a text item with a LOV. You can define your logic to get list of values in record group.
    Thanks
    Rishi

  • Automatic determination of supply sources

    Hi,
    Automatic determination of supply sources
    During the sourcing process, the system selects all sources of supply that are assigned to the product category of a contract item or a supplier list entry. If no source of supply can be selected from the product category, the next superordinate product category level in the product category hierarchy is used.
    Can somebody throw some light on last statement:
    "If no source of supply can be selected from the product category, the next superordinate product category level in the product category hierarchy is used."
    Thanks And Regards,
    KK.

    KK. Please clarify again.
    do you have hierarchy contracts or you uploaded locally a product category hierarchy in srm server ?
    always system assign appropriate product category w.r.t sc free text item product category if only one product category contract or system shows to the requestor  what are the appropriate contracts  contracts applicable to the sc produc category.
    if the system dont propose it, it is not relavant to sc product category.
    or if you want assign any contract means you can give control to buyer in the cockpit or you can forcily assign any contract by enhancement.
    muthu

  • Deactivate the automatic determination of Requirement type

    How can i deactivate the automatic determination of Requirement type for a particular transaction (eg.va01).
    I know it is determined automatically based on one of the following
    1.Strategy group assigned to the materiaL master.
    2.MRP group in material master.
    3.Material type
    4.Item category and MRP type.
    5.Item category.
    I want this to be deactivated for a particular transaction. How do i do it?
    Please help.
    Madhu

    Hi,
    As soon as you save an order.VA01..the requriements of each line item are trasnferred to MM/PP depending on the planning strategy chosen for each material at the material master record. Therefore there is no chance of deactive the requriement type.
    I'm not sure but try this exist,
    V45S0003 MRP-relevance for incomplete configuration
    V45S0004 Effectivity type in sales order.
    Regards,
    R.Brahmankar

  • Block Partner determination at Item level

    Hi All,
         I dont want the partners to be automatically determined at the item level for certain partner functions like Employee responsible. To achieve I have checked on the "Block Determination" check box and have also no entry selected in the access sequence drop down for the partner function in the procedure. However the partners are being determined based on the entries at the header level.
    How do i stop this from happening? Am i missing some config here?
    Thanks
    Reddy

    Hello Reddy,
    I think the issue is caused by the partner inheritance process. Please conisder note 1008458 very carefully. It looks like the the inheritance from header to item is switch on, therefore you get the same partner functions on item level. According to the note you have to set a the parameter in table smofparsfa.
    I hope this information will help you.
    BR
    Rene

  • Automatic determination of Region of destin.

    Hi experts,
    I am facing a problem in the import tab of Purchase order.
    How to maintain the <b>Region of destin</b>. to make it automatically determined after the Ctry of origin, Dispatch ctry and Ctry of destin etc have been auto entered? I know it can be manually selected, but fail to know how to make it automatically displayed.
    Thanks,
    Helen

    on the item level of purchase order, for the trade happened in Europe, there would be possibly the tab of import.
    in the tab, there are five fields:Ctry of origin, Dispatch ctry, Ctry of destin.,Trading country and Region of destin.. How to make the field <b>Region of destin</b>. auto determined if other four fields have entered auto?
    Thanks, (hope it is more clear now)
    Helen

  • Automatic determination of condition group

    Hi
    My client has the following requirement:
    - For 3rd party items, in few situations we might have to supply the items immediately.
    - In such situations we request our supplier to supply the item directly to the customer (instead of bringing the item into our plant and then shipping)
    - In the existing sales orders we change the item category of the item from ZTAN to ZTAS (3rd party item).
    Customer wants to have automatic determination of the condition group 2 field at the item level (to some specified CG2 values) whenever we have the change in the item category.
    Let me know how we can do this.
    Regards
    Jagadish

    Hi Jagadish,
    The field Condition group 2 will be depend upon the Customer not based on the Material or Item or itemcategory,
    So I dodn't think system will change the data in this field when you change itemcategory alone.
    If you change the customer it will change accordingly
    I hope it will help you,
    Regards,
    Murali.
    Edited by: Murali Mohan.Tallapaneni on Jul 12, 2008 6:37 AM

  • Error message "No business area can be determined for item 000010"

    Hi all,
    I had maintained business area assignements.
    However, while creating a sales order, the following error message appears : "No business area can be determined for item 000010"
    What does it mean ? And how can I fix this problem ?
    Regards,
    Bahia.
    Edited by: Bahia M. on Nov 13, 2008 11:58 AM

    Dear Bahia,
    Please go to IMG path assign the business area
    IMG>Enterprise structure>Assignment>Sales and Distribution>Business Area Account Assignment-->Define Rules By Sales Area(Roule 1)
    -->Assign Business Area To Plant And Division
    I hope this will help you,
    Regards,
    Murali.

  • Automatic determination support team based on own specs?

    Hi,
    Rule 13200137 to automatically determines a support team using some standard specs such as:
    SAP Component
    Catalog Subject
    Category
    Code Subject
    Subject Code Group
    Sold-ToParty Country
    Transaction Number
    Priority
    etc...
    how can I add other specs? We need to determine the support team based on data specified in the business partner, ie postal code. In other words, our support team depends more on geographical specs, than SAP componenents.
    How can I add other specs in this rule? The function CRM_DNO_READ_PARTNER_WFRULE seems quire hard coded, so I was wondering how to do this?
    thanks a million,
    regards,
    maggie

    Hi  dolores
    I have configured service desk and determination of support message team,
    Users can change status of service desk message trough B_USERSTAT  Authorization object if the Actions are available regarding the ticket status
    I like to set conditions, sou2026 if service message are assigned to BASIS TEAM only this group must change service message status or edit service message data
    Thereu2019s any way to do this trough authorization objects?? B_USERST_T  maybe ?  combination of B_USERSTAT & B_USERST_T (activation) ?? Status profiles & Authorization key & transactions types, actions profiles??
    Best Regards

Maybe you are looking for