Creating Notification/Items/Tasks...etc
Hey guys, i'm writing a program to create notifications/items/tasks...etc and i'm trying to use a couple of different bapi's to do such. Having difficulties get them to work properly. Not sure if its a parameter problem or what but could use some help. Does anyone have any experience with BAPI_SERVNOT_CREATE or BAPI_ALM_NOTIF_CREATE?
I'm getting an error sometimes (Notification type S1 not defined)and other times it appears to create the notification however, no such notification exists in the service notifications (tn# iw53).
Any help would be greatly appreciated. Thank you so much!
-Shaunt
Hi Shaunt,
the BAPI for creating the service notification is actually pretty straightforward. I don't know about the errors you mention, but I guess I have an answer for your second problem.
Try calling BAPI_SERVNOT_SAVE and then BAPI_TRANSACTION_COMMIT after calling BAPI_SERVNOT_CREATE and you should find the notification in IW53 (unless the first call to the BAPI returned any error messages.)
Hope this helps, harald
Similar Messages
-
Hi PLM specialists,
I do have a question concerning quality notification, type F2 - vendor error. I do get the following tabs: reference objects, subject, processing: that's clear.
But there are also these tabs: items, tasks, activities. The tab items has the following subtabs: overview, causes, tasks and activities.
Does anyone has an idea concerning their use and what is the difference between the subtabs tasks, activities and the tabs tasks and activities?
Thanks!Dear Peter,
The use of Item level Tasks and Header level task have been mentioned in SAP help.
Basicaly Header level tasks are referred as "Immediate Tasks", These tasks provide a quick fix for a problem requiring immediate attentione and header level activities are referred as activities done immediately attend the same.
Item level tasks are " Corrective Tasks". These tasks usually provide final solutions that wil prevent the problem for reccuring.
For eg if you get a vendor rejection in your shop the immediate action will to intimate to the concerned person quickly and remove it to block location. So your immedite task can be of like 1) Communicate the production personnel 2) block the material 3) block the vendor 4) inform vendor and activities can be of like 1) email send to vendor 2) material moved to block 3)deliveries return back to vendor etc
But as you know notification refers to a particular defect. So we need to take necessary corrective and preventive actions. SAP notification helps in doing this also. The item level entries are basicaly meant for this. In Item overview we can enter the defects that was noted on the material, you can maintain relevant causes for the same. Corrective tasks can be of like 1) Audit at vendors place 2) activation of source inspection 3) tighten the inspection standards and relevant activities done to achieve the tasks can also be maintained. This also helps in creating the 8D reports
So a detailed analysis of the problem is dealt in the item level Cause, tasks & activities while immediate action get covered in the header datas.
Hope this helps in clarifying your doubt
Regards
Gajesh -
Automatic Determination of Item Tasks on PM Notification
Hello everyone,
I know using a Response Profile and Priority I can automatically determine tasks on a notification. This only seems to work on standalone tasks.
My question I have Items and Item Tasks on a notification has anyone been successful in using a Response Profile and Priority to automatically determine tasks when the tasks are related to the item. User exits or enhancements would be acceptable.
We are currently running:
Release 710 Final Release
File Version 7100.1.4.1029
Patch Level 4
Thanks in advance for any assistanceHello Bill,
I am sorry to say that this is probably not possible the reason is that you have to create a QMSM set with reference to an item and if no item number is available then the correspondent task cannot be assigned. You could however check if the exit QQMA0006 could be used for this purpose. In this case I would analize how the structures VIQMFE VIQMSM and VIQMUR are filled when creating an item this may help in finding a solution.
Sorry that I cannot offer you a better solution.
Regards,
Isabelle -
Complete the item task in notification
Hi
How to complete the item task in the notification.
i check one notification which has the task as item task.
i donot find the option to complete this task.Dear Raj
I understand that you have already moved the stock to block. Now you have completed the notification. The reasong why it is showing lot accepted even though defects is because you have chosen UD code as accepted.
Actualy the process when you have rejection is like this.
Rejection
1. Defects found while inspection and result recording
2 Defect recording is done and result recording is saved. Notification is created automaticaly , add tasks
3 Task released and completed
4. UD given as rejected and material moved to block stock
5. Create a rework order using Tcode Co01 order type (PP03) if any rework is to be done on the rejected material.
6. Rework done . Material to be tested again .Move the material back from block to quality using Tcode MB1B u2013 349 movement type (activate 08 inspection)
7. Inspection lot created
8. do the posting accordingly
Regards
gajesh -
We are EXTREMELY sensitive to corporate data and we wish to force compliance to our standards. We understand people need to back up THEIR data, but we are not willing to allow them to backup OUR data. We define OUR data to be any data that is entered into our Corporate Mail environment (Exchange 2007). Is there a way to allow for backups to either iCloud or iTunes that does not back up Exchange Contacts, Mail, Calendar, Tasks, etc. ?
We are using Mobile Iron which provides a way to disable BackUp via iPhone profiles being distributed, but we wish to allow people the ability to backup their content, again, just not ours. And we've seen some very similar threads.
We have noticed that the backups do not backup Mail and Calendar items, but it does backup Contacts. That's the sticking point.
Any help would be most appreciated. This is a major concern.OK, sounded like a good suggestion, perhaps it only appeared the data was being backed up, but in reality the connection was being made and the contacts were some how syncing back w/ the cached credentials restablishing sync with the server. That would not have explained why messages and calendar items didn't resync; but I was willing to take it for a test spin. Wiped device, changed password in AD (so that it couldn't sync), began restore, and after restore with AD password changed prior to restore, the two test Exchange contacts were regrettably on my phone. Further test the reasonable theory of maybe credentials are being restored and the only contact data is being actually synced to get the data back on the phone, I added a third contact.
Now just to be belt and suspenders (to make sure something isn't happening at the restore where it get's the contact information at that exact window of time), I am wiping my again to see if the third contact (that's in my exchange contacts on the server) makes it to my device possibly during the sync, but I'm pretty sure what is happening is that he contact is making it "or being" some how categorized as "phone" data as opposed to Exchange data and being backed up there erroneously. For instance if you were to create a contact on an iPhone prior to establishing a sync relationship with the exchange server, it would take that contact and create that contact on your exchange server for you so that your "phone" data and your "exchange" data (as it relates to contacts at least) are in sync.
If you grant this assumption, then, when syncing Exchange data, the "phone" data is being created. When the back up takes place, I believe there is no distinction or bifurcation of these two data types. Phone data is backed up with no rhyme or reasoning related to its history or origin of creation (i.e. where it came from), it's not a contact from Exchange, it's just a contact. I believe Apple needs to tattoo Exchange contacts in some fashion or provide a "transparency" kind of paradigm or model used for calendars, where you can see two sources intermingled in a view, but they are truly not (you just see all).
Apple has indicated they understand the severity of this and are looking into it, but if anyone else has any insight or profiles not discussed on
http://help.apple.com/iosdeployment-ipcu/#app665501b0
Please sound off, and thank you imanog and bonesaw for your contributions. -
I moved from DK to the US and now I have created a US-apple-ID. How do I transfer all my contacts, calendar items, notes etc. from my DK-apple-ID to my new US-apple-ID?
Hey kristina rivera!
You will first want to export your contacts from iCloud using the following article:
iCloud: Export contact information as a vCard
http://support.apple.com/kb/PH3606
You will then want to log in to her iCloud account, then import the vCard file that had been exported from your iCloud account:
iCloud: Import a vCard
http://support.apple.com/kb/PH3605
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Hi all,
I am a newbie to adobe livecycle process. I am trying to prepopulate the data like the users info when the form is originated in the workspace.
I did use the samples example for form render service but added to variables called first and lastname as i want these fields to be populated.I am also using an xmlvariable which stores the xml data-(first name and last name) from the form (i got the xml data from the jDBC service usingquery multiple rows by quering edcpricnipal entity). I have followed the steps from http://www.roland-lopez.com/blog/index.cfm?event=showEntry&entryId=ECB034DA-3048-5304-BA9 BB7B0DEDC725A.
Now I am trying to use the sevice in my application. hennce I created a input variable called app_info of type xfa form and in advanced settings I called the render service which is created before. I am using a PDF file in resources.
When I try to open the form in workspace I get the error
An error occurred creating the form (task 2348, form 0). (ALC-WKS-007-040)
In the erroe log I get the the following error -
message = ALC-WKS-005-028: A problem occurred in the Render Service. Please review the render orchestration for this process.
details = null
rootCause = ALC-DSC-003-000: com.adobe.idp.dsc.DSCInvocationException: Invocation error.
body = null
extendedData = {message=ALC-WKS-005-028, cause=com.adobe.idp.taskmanager.dsc.client.task.TaskManagerException}
2008-11-23 18:55:11,138 INFO [STDOUT] [Flex] Error handling message: flex.messaging.MessageException: ALC-WKS-005-028: A problem occurred in the Render Service. Please review the render orchestration for this process.
incomingMessage: Flex Message (flex.messaging.messages.RemotingMessage)
operation = render
clientId = BE816575-BA0E-55AB-43D6-53511DE9544A
destination = task-actions
messageId = 995C15F0-9EE8-20A7-7378-CBC737C22D1A
timestamp = 1227484510810
timeToLive = 1227484510810
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = BE810559-3C1E-B9CC-BB02-DAD2017E1CB6
errorReply: Flex Message (flex.messaging.messages.ErrorMessage)
clientId = BE816575-BA0E-55AB-43D6-53511DE9544A
correlationId = 995C15F0-9EE8-20A7-7378-CBC737C22D1A
destination = task-actions
messageId = BE816896-820E-9C32-0CC9-22149F2E7879
timestamp = 1227484511138
timeToLive = 0
body = null
code = Server.Processing
Can someone please help me with this.
Thanks a tonn in advance.Hi Jasmin,
Thanks for your reply. I have changed the variable type in the main application from xfa to document type as suggested. But when I try to open the file in workspace I get the sameerror. but in the error log the error is as follows
INFO [STDOUT] [Flex] Error handling message: flex.messaging.MessageException: com.thoughtworks.xstream.mapper.CannotResolveClassException : com.adobe.idp.taskmanager.form.impl.xfa.XFARepositoryFormInstance : No ClassLoaders found for: com.adobe.idp.taskmanager.form.impl.xfa.XFARepositoryFormInstance
incomingMessage: Flex Message (flex.messaging.messages.RemotingMessage)
operation = render
clientId = C750393C-201C-717C-FCD5-6C61E56457A8
destination = task-actions
messageId = 8F8A2B82-2778-A08E-6D8A-CF62CE975DD3
timestamp = 1227545038368
timeToLive = 1227545038368
body = null
hdr(DSEndpoint) = workspace-polling-amf
hdr(DSId) = C74FE532-741B-7AD1-6240-601872F82B0D
errorReply: Flex Message (flex.messaging.messages.ErrorMessage)
clientId = C750393C-201C-717C-FCD5-6C61E56457A8
correlationId = 8F8A2B82-2778-A08E-6D8A-CF62CE975DD3
destination = task-actions
messageId = C7503B9E-7A0B-28E0-59DC-ACD49B49B722
timestamp = 1227545038618
timeToLive = 0
body = null
code = Server.Processing
message = com.thoughtworks.xstream.mapper.CannotResolveClassException : com.adobe.idp.taskmanager.form.impl.xfa.XFARepositoryFormInstance : No ClassLoaders found for: com.adobe.idp.taskmanager.form.impl.xfa.XFARepositoryFormInstance
details = null
rootCause = com.thoughtworks.xstream.mapper.CannotResolveClassException: com.adobe.idp.taskmanager.form.impl.xfa.XFARepositoryFormInstance : No ClassLoaders found for: com.adobe.idp.taskmanager.form.impl.xfa.XFARepositoryFormInstance
body = null
extendedData = null
2008-11-24 11:44:01,321 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl retrieveEvent
INFO: retrieving active event for 6052
2008-11-24 11:44:01,321 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl retrieveEvent
INFO: retrieved active event for 6052
2008-11-24 11:44:01,337 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl sendNotifications
INFO: Total subscriptions retrieved = 2 for event id6052
2008-11-24 11:44:01,353 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl createNotifications
INFO: Now creating notifications.
2008-11-24 11:44:01,353 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl createNotifications
INFO: Created 2 notifications.
2008-11-24 11:44:01,353 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl retrieveEvent
INFO: retrieving active event for 6052
2008-11-24 11:44:01,353 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl retrieveEvent
INFO: retrieved active event for 6052
2008-11-24 11:44:01,431 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl deliverNotificationToService
INFO: Now delivering notification to service RemoteEvents
2008-11-24 11:44:01,431 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl deliverNotificationToService
INFO: Now delivering notification to service operation onEvent
2008-11-24 11:44:01,431 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl deliverNotificationToService
INFO: Now delivering notification to service operation parameters {eventType=TaskCreated}
2008-11-24 11:44:01,431 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl deliverNotificationToService
INFO: Now delivering notification to service OrchestrationEventHandler
2008-11-24 11:44:01,446 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl deliverNotificationToService
INFO: Now delivering notification to service operation onEvent
2008-11-24 11:44:01,446 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl deliverNotificationToService
INFO: Now delivering notification to service operation parameters {eventTemplateId=STRT_ER1172599333679, serviceName=Task Assignment, eventTemplateType=eventReceiveAsStartTemplate, eventTypeName=TaskCreated}
2008-11-24 11:44:01,446 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl deliverNotificationToService
INFO: Notifications delivered
2008-11-24 11:44:01,446 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl disableNotification
INFO: Attempting to disable the notification after delivery.
2008-11-24 11:44:01,446 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.workflow.dsc.service.OrchestrationEventListenerService onAsynchronousEvent
INFO: ProcessManagerSerice:onAsynchronousEvent()
2008-11-24 11:44:01,446 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl disableNotification
INFO: Attempting to disable the notification after delivery.
2008-11-24 11:44:01,462 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.util.EventDBHelper getActiveEventByPrimaryKey
INFO: Event with id 6052 is already disabled, EventService will not deliver notification.
2008-11-24 11:44:01,462 INFO [com.adobe.workflow.AWS] Invoking action synchronously
2008-11-24 11:44:01,462 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.livecycle.notification.TaskNotificationServiceImpl taskAssignment
INFO: TaskNotificationService called taskAssignment: 2350
2008-11-24 11:44:01,462 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.livecycle.notification.TaskNotificationServiceImpl handleNotificationEvent
INFO: TaskNotificationService called handleAssignmentOrReminderEvent: 2350
Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl updateEventStatus
INFO: Event with id 6052 is already inactive.Event instance with id 6052 is inactive for TaskCreated
2008-11-24 11:44:01,478 INFO [com.adobe.livecycle.remoteevents.client.RemoteEventClient] message received type: event
2008-11-24 11:44:01,478 INFO [com.adobe.livecycle.remoteevents.client.RemoteEventClient] message received part 1: {data=[B@1d766ce, event=TaskCreated}
2008-11-24 11:44:01,556 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl deliverNotificationToService
INFO: Notifications delivered
2008-11-24 11:44:01,556 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl disableNotification
INFO: Attempting to disable the notification after delivery.
2008-11-24 11:44:01,556 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl disableNotification
INFO: Attempting to disable the notification after delivery.
2008-11-24 11:44:01,556 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.util.EventDBHelper getActiveEventByPrimaryKey
INFO: Event with id 6052 is already disabled, EventService will not deliver notification.
2008-11-24 11:44:01,556 INFO [STDOUT] Nov 24, 2008 11:44:01 AM com.adobe.idp.event.notification.NotificationManagerImpl updateEventStatus
INFO: Event with id 6052 is already inactive.Event instance with id 6052 is inactive for TaskCreated
Thanks for your reply! -
UWL Help - How can i create my own task within the Enterprise Portal
Dear all,
I am currently working with UWL .
I have tried the customization and those stuffs associated with UWL , and it is working properly.
My current issue is , how can create my own task within the Portal ( not using Ad Hoc Workflow , which is present in Portal) ?.
If i can create my own task within portal by API or using another method , then How can i add that task link within the drop down box that is present in the Collaboration launch pad and Mytask Workset.?
Is there any API regarding UWL (which is useful for creation of custom tasks in Portal using Developer Studio by means of Portal Application Creation) ?
How can i add that custom task in the drop down ?.
I have tried the customization of existing UWL.
I shall be grateful to those who can help me to solve this issue with links regarding the solution of my problem's.
with regards
Kishor GopinathanHi Kishore,
I am trying to do the same thing. When i am creating Collaboration Task, it has standard templates in the dropdown like "Single Step" and "Multi-Step" etc., If i want to create my own Custom Task Template and display in that dropdown, how can i do that? Your help is really appreciated.
Thanks
Vijay -
Speed up time of AI Create Channel.vi task containing thousands of channels
I am creating an AI task containing a total of 8000 channels of different channels with each channel being acquired many times before the next channel is acquired. The channel list is something like 0,0,0,...,1,1,1,...,2,2,2...3,3,3... where each channel number would be acquired 2000 times. The purpose is to perform averaging. I am seeing that DAQmx Create Channel.vi takes about 100 msec to create 1000 channels for a total of 800 msec to create all channels (DAQmx 9.4, LV 11, WIN 7, CoreDuo P8700 2.5 GHz). I would like to speed this up by a factor of 10 if possible. Test vi attached.
Attachments:
Create Multiple Channels duration.vi 17 KBHi SteveP,
The DAQmx task contains data structures representing channels, which in turn contain other data structures representing channel properties and such. Most of the execution time of DAQmx Create Channel is spent allocating and initializing these data structures. They are separate from the task's input buffer (where data is stored until DAQmx Read is called). The input buffer is allocated when you reserve the task (which is normally done by DAQmx Start Task), and it is indeed allocated as a single large array.
DAQmx support for repeated channels focused on the SCXI use case, where hundreds of milliseconds of channel creation time seemed to be an acceptable tradeoff for measuring thousands of thermocouples. During development of NI-DAQmx 7.0, we used 3072 channels as our large system benchmark for channel creation, since that's the maximum number of channels supported by an SCXI task: 8 chassis x 12 modules x 32 channels (ignoring CJC channels). Repeated channels also make your use case possible, but this wasn't the original goal, otherwise we would have tried to make it easier to use for this purpose.
When replying to your previous thread on this topic (DAQmx AI Task with many samples CH0, then many CH2, then many CH3), I assumed that you were doing this because you were having problems when you took the straightforward approach to averaging, but Ben is right to point out that there are ways to deal with ghosting, cross talk, etc. What is the source impedance of the signals that you are measuring? How Do I Eliminate Ghosting From My Measurements? lists some options for dealing with high source impedance.
Failing that, is it possible for you to reduce the frequency at which your program creates and destroys tasks? If you can extend the task lifetime by reusing the same task more than once, you can avoid the channel creation overhead, or at least amortize it over the lifetime of the task. Note that you don't have to clear one task before you create a second one; you only have to make sure that two tasks don't have the same hardware reserved at the same time--if you do, you will get a reservation error. In most cases, stopping the first task before starting the second is sufficient to avoid this. It is possible to create multiple tasks up front, then switch between them throughout the rest of your program.
Brad
Brad Keryan
NI R&D -
Create Notification Navigation Button not working in Order Objects Tab
Hi Gurus,
I am having an issue in Order --> Objects tab. I want to create notification for additional technical objects for the order. When I enter the technical object details and press enter, a "Create Notification" navigation button gets activated for that line item. But when I press that button, nothing happens. On the other hand if a select multiple line items and then press "Create Notification" button at the bottom of the line items, I am able to create notifications for the selected line items.
Can someone help me suggest what can be the problem or suggest a Note which might restore the functionality of the "Create Notification" navigation button at the line item level.
Thanks in advance for the help.
Best Regards
Vikas HaliVishal,
I dont think the Notification Create Button from line item is pretty much dependent on the Customization Settings or any sap note concerning this has not been as yet brought into my notice. In my system, this is working appropriately. The problem with this which i can think of is either an authorization issue or you should raise an oss for this.
Regards,
Usman -
Search option in catalog selection in maintenance notification item, object
Dear Experts,
I have a problem to search & choose the relevent catalog codes in maintenance notification item, in catalog selection pop up when F4 done on object part. Is there any setting to find the relevent codes from the cataloge selection screen or any setting for the FIND option availabilty on the catalog selection pop up.
We are using ECC 5.0.
Kindly provide the solution.
Regards,
TusharTushar,
Your emphasis is on Relevant Codes. This means codes relevant to the Technical Object (Equipment or Functional Location)
For this purpose only SAP has given the functionality Catalog Profile.
Create a Catalog Profile (OQN6) in which you mention the codes relevant to the technical object.
Now mention this Catalog Profile in the Organisation tab of the Technical object. (Equipment or Functional Location).
After this whenever you create a notification on such Equipments/FLs, you will get only those catalogs which you've mentioned in the Catalog Profile
Hope this helps you.
Regards
Jogeswara Rao
PS: Creating a catalog Profile is a IMG activity, which you have to do in Client 200> generate a request> and transport this request to the client of your working. -
How to update data and create notification no using isr fm.
Hi,
Without creating the scenario in SFP, is it possible to update data directly in ISR_SPECIAL_DATA_SET,
i want to use fm ISR_SPECIAL_DATA_GET in my program.
i'm trying to achive same using ISR_NOTIFICATION_CREATE and built general, special table and long text to get a
notification number. but notification no is not creating , return msg is ( E I 421 |Notification type not defined ) even i'm passing currect notif type.
Regards
AliHi vijay,
Nice to see your reply, I think, you are right...
The Fm ISR_SPECIAL_DATA_GET already used in my various reports, Workflows etc.
And I have a custom WebDynpro java based application which have similar data and have custom notification no. + (in this case probably i need to create new fm ZISR_SPECIAL_DATA_GET to use in above report and wf)+
To avoid the rework and minimized the code Iu2019m trying to create notification no using standard fm and link custom WD data with ISR_SPECIAL_DATA_GET.
Please let me know how to proceed with that
Regards
Raza -
How to create database item for fast formula?
Hi,
Is there any document for how to create database item for fast formula? I could not find in Metalink or this forum. Thanks.
AndyOracle ship many pre-delivered Database Items plus they're created automatically when you create Input Values (etc).
There's often something already there for you. If there's not, you usually create Fast Formula functions to retrieve other data. You don't create your own custom DBIs; Oracle don't deliver APIs for that. -
Creating notification (Its urgent Plz help)
Hi All,
I am asked to do a development for create notification such that if a person enter the measuring point greater than a specified limit say 60 which according to them is a dangerous point then a notification should be created and it should be triggered to the concerned person that the measuring point is at danger level. How could i achieve this functionality, how should i proceed, the transaction in which they needed this functionality is IK11.
What should i do , how to proceed please help me out as its urgent issue.
Thanks and Regards,
Rachit KhannaHi,
<u>check the following fun modules based on it</u>
<b>2078 BAPIs for quality notifications</b>
BAPI_QNOTIFICAT_CREATE Create quality notification
BAPI_QNOTIFICAT_GETCATALPROFIL Determine Catalog Profile for Quality Notification
BAPI_QNOTIFICAT_GETKEYFIGURES Determines Existing Quality Notifications
BAPI_QNOTIFICAT_GETLISTFORCUST Select quality notifications for a customer
BAPI_QNOTIFICAT_GETMATLISTFCUS Select a Customer Material List for Quality Notifications
<b>EEWM_SV_NTF IS-U-WM: Service Notifications</b>
BAPI_ISUSMNOTIF_CREATEMULTIPLE Create service notifications
BAPI_ISUSMNOTIF_SETCOMPLETED Set Service Notification to Completed
BAPI_ISUSMNOTIF_USERSTATUSSET Set User Status for Notification
<b>IWOPM BAPI Functions for PM/CS Notifications</b>
BAPI_ALM_NOTIF_CHANGEUSRSTAT Change User Status of a PM/CS Notification
BAPI_ALM_NOTIF_CLOSE Complete PM/CS Notification
BAPI_ALM_NOTIF_CREATE Create PM/CS Notification
BAPI_ALM_NOTIF_DATA_ADD PM/CS Notification: Add Data
BAPI_ALM_NOTIF_DATA_DELETE PM/CS Notification: Delete Data
BAPI_ALM_NOTIF_DATA_MODIFY PM/CS Notification: Change Data
BAPI_ALM_NOTIF_GET_DETAIL PM/CS Notification: Read Detail Data
BAPI_ALM_NOTIF_LIST_EQUI Select PM/CS Notifications by Equipment
BAPI_ALM_NOTIF_LIST_FUNCLOC Select PM/CS Notifications by Functional Locations
BAPI_ALM_NOTIF_LIST_PARTNER Select PM/CS Notifications by Partners
BAPI_ALM_NOTIF_LIST_PLANGROUP Select PM/CS Notifications by Maintenance Planner Group
BAPI_ALM_NOTIF_LIST_SORTFIELD Select PM/CS Notifications by Sort Field
BAPI_ALM_NOTIF_POSTPONE Reset PM/CS Notification
BAPI_ALM_NOTIF_PUTINPROGRESS Release PM/CS Notification
BAPI_ALM_NOTIF_SAVE Save PM/CS Notification
BAPI_ALM_NOTIF_TASK_COMPLETE PM/CS Notification: Complete Task
BAPI_ALM_NOTIF_TASK_RELEASE PM/CS Notification: Release Task
BAPI_ALM_NOTIF_TASK_SUCCESS PM/CS Notification: Set Task to Successful
<b>IWWW BAPIs for Eqpt. + Service Notifications</b>
BAPI_SERVICENOTIFICAT_CREATE Create service notification
BAPI_SERVICENOTIFICAT_GETLIST Select service notifications according to customer or contact person
Reward points for useful Answers
Regards
Sudheer -
PM Notification - Item level user-exit
Hello there!
I'm trying to use QQMA0008 user-exit (User Subscreen for Additional Data on Notification Item) in order to add new fields to my notification item, but system is just trying to hinder my purposes... And it's at its best!
I've already customized my client requirements regarding to Notification Header (via QQMA0001 user exit), but I'm facing several new handicaps with the Item enhacement, so let me explain the steps I've followed and, please, make me see reason if anything is wrong with my (unfinished) procedure.
- <b>CMOD</b>: I've created a project and add the suitable components to it. Project is active and I'm sure there's nothing wrong with it (because there are some other enhancements in it, such as the "User Subscreen for Notification Header" I've talked you about, <b>QQMA0001</b>, which is actually working as it should)
- <b>SE80 / SCREEN PAINTER</b>: I've developed a test screen which is, in fact, associated to the user exit I'm trying to get to work: <b>SAPLXQQM 0210</b>
- <b>IMG</b>: <i>Cross-Application Components / Notification / Notification Creation / Notification Type / Define Screen Templates / Define Screen Areas and Tabs</i> ( ? )
What am I suposed to do right now? I mean, if I select my Item tab (<b>10\TAB10</b>), all Screen Areas (sreen blocks) are "grey" (I mean, there's no possible input for these five fields). How can I make the system know it has to show my custom screen/subscreen in the Notification Item tab? It was pretty easy when I worked with the Header, I've just used the "Aditional Data" tab (<b>10\TAB02</b>) and selected the Customer Subscreen (One Screen/Not.Type), '<b>090</b>', in the first Screen Area (it was obviously in "white" mode, I mean, allowed input mode)...
But I just don't know what to do with the Item parametrization! Can you please help me with this matter?
On the other hand... What do I have to do with <b>TQSUB</b> table? I've included a new line in it in order to let the system know about my Header custom dynpro (<b>SAPLXQQM 0100</b>), but now it doesn't allow me to do the same thing (and I can swear you I don't know why)!
System displays the following error message:
Diagnosis
Entries in table TQSUBT cannot be edited in connection with customizing object TQSUB S as table TQSUBT does not belong to customizing object TQSUB S, according to the object definition.
System Response
The function terminates.
Procedure
Check whether the entered objects and keys are correct.
Then check in the Implementation Guide whether the object was created correctly.
Correct the object definition or the entry for the Transport Organizer interface.
Any ideas?
Thanks in advance, any help will be (kindly) appreciated.
Greetings from Switzerland!Hi
For this u need to implement the ehancement spot. To achive this u need to implement the ehancement spot in include
LMEPOF7X. And modify the required field in structure mepo.
Regards,
Raghavender.
Maybe you are looking for
-
Hp officejet 6500a plus print problem.
New set of HP cartridges installed. Ink level report shows ink in only two of the cartridges. Printhead check shows one colour on report - 2nd level check shows a different colour - but each time only one. Printhead alignment said successful. Pri
-
T500: No Sound After Closing Lid
I have 'do nothing' set in Power Manager for when I close the lid of my T500, but upon closing it, any audio playing cuts out after a few seconds. Any ideas on how to fix this so I can listen to music without having the lid open? Cheers T500 User
-
Blocked number still getting through
How is a blocked number still sending me text messages?
-
Planned Orders -Order level & Order path fields
Dear all, In Planned Orders , in the components tab , the following fields are assigned/populated with some values by the system. Order level Order path Assy Order Level Assy Order path Please clarify , on what basis or what is the logic behind this
-
Opening Captivate 3 projects in Captivate 2
When opening a particular file in Captivate 2, I get an error that says, Adobe Captivate could not open _______file because it is either not a supported file type or because the file has been damaged. The project was created using Captivate 3 -- is t