Automatic migration of servers in a networked application

Does anybody have any ideas about how to automatically migrate servers in a networked
application? The tmadmin utility has commands to suspend/resume and migrate servers,
which you can invoke manually when a node fails. But how can we automate this
process?

Peter
We expect to be using a cluster, so I guess I will use the cluster infrastructure
to fire off scripts.
Thanks
Tom
Peter Holditch <[email protected]> wrote:
Tom,
You can write code with the MIB to migate servers. This code could also
poll
the MIB to detect failures.
Beware, however, that a temporary network failure could look like a machine
failure, in which case automatic migration could cause more problems
than it
solves. That's why Tuxedo doesn't attempt automatic migration.
For very HA solutions, a hardware HA system such as HP's MCServiceGuard,
Veritas, etc. would fire scripts to migrate the Tux servers when a failure
was
(reliably) detected.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and
BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness
of the
information provided
and assumes no duty to correct, expand upon, delete or update any of
the
information contained in this posting.
Tom Hogan wrote:
Does anybody have any ideas about how to automatically migrate serversin a networked
application? The tmadmin utility has commands to suspend/resume andmigrate servers,
which you can invoke manually when a node fails. But how can we automatethis
process?

Similar Messages

Auto-spawn/decay of servers in a Tux Application

I am trying to use the auto-spawn/decay feature available with Tuxedo for MSSQ servers - while servers decay successfully, I am unable to get servers to spawn automatically, even when more than 4 requests are outstanding for 20 seconds, and the highwater, create_time parameters are 1, 3 respectively.

Peter
We expect to be using a cluster, so I guess I will use the cluster infrastructure
to fire off scripts.
Thanks
Tom
Peter Holditch <[email protected]> wrote:
Tom,
You can write code with the MIB to migate servers. This code could also
poll
the MIB to detect failures.
Beware, however, that a temporary network failure could look like a machine
failure, in which case automatic migration could cause more problems
than it
solves. That's why Tuxedo doesn't attempt automatic migration.
For very HA solutions, a hardware HA system such as HP's MCServiceGuard,
Veritas, etc. would fire scripts to migrate the Tux servers when a failure
was
(reliably) detected.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and
BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness
of the
information provided
and assumes no duty to correct, expand upon, delete or update any of
the
information contained in this posting.
Tom Hogan wrote:
Does anybody have any ideas about how to automatically migrate serversin a networked
application? The tmadmin utility has commands to suspend/resume andmigrate servers,
which you can invoke manually when a node fails. But how can we automatethis
process?

Migration Assistant - Error Connecting to Network of sending MAC to new Mac

Migration Assistant - Error Connecting to Network of sending MAC to new Mac
So I doing the network Migration Assistant and its keeps giving me a ERROR connecting to Network of sending MAC to new MacBook Air... help...

The local path needs to be written as the "volumes". It's the Windows equivalent of using a Network Drive letter. If you have not set up the volume in the Mac Finder you will run into issues. DW was originally intended to have all files locally on your computer with a different testing server and different web server. The fact that you have the "d$" name suggests to me that these are Windows servers that are you connecting to. This article should help you map a drive that reconnects ( http://osxdaily.com/2012/05/04/automatically-connect-to-network-drive-mac-os-x/ ).
As far as the remote, for this DW should be allowing a network address because it is never assumed that the testing server is local on the computer. This may end up being a bug, but let's see if we can correct one problem at a time.

WLI 10.3 JMS Automatic migration error

Can anyone please help in resolving the below error.
This Error is seen on Admin server startup after setting migration policy to 'Automatic exactly once' on one of the managed servers in the cluster.
***The automatic migration itself is working fine though.
The migration bias on the cluster has been configured to use a database.
-----Error BEA-149231
<11/09/2009 02:01:42 PM NZST> <Error> <Deployer> <BEA-149231> <Unable to set the
activation state to true for the application 'conversational-jms'.
java.lang.IllegalArgumentException: Cannot add Singleton Service new_ManagedServ
er_1 (migratable) as SingletonServicesManager not started. Check if MigrationBa
sis for cluster is configured.
at weblogic.cluster.singleton.SingletonServicesManager.addConfiguredServ
ice(SingletonServicesManager.java:280)
at weblogic.cluster.migration.MigratableGroup.<init>(MigratableGroup.jav
a:95)
at weblogic.cluster.migration.MigrationManager.privateRegister(Migration
Manager.java:232)
at weblogic.cluster.migration.MigrationManager.register(MigrationManager
.java:192)
at weblogic.jms.module.ModuleCoordinator.activate(ModuleCoordinator.java
:243)
similar error seen for the system JMS modules
configwiz-jms,
WseeJmsModule,

Hi,
I have the same problem. I solved changed the cluster configuration. When configured the domains, the cluster interconect via unicast.
When change unicat to multicast, reboot the domain and MDB connect correctly with JNDI JMS Server.
Regards.

Will iPhoto collection be automatically migrated to new Photos app?

Will iPhoto collection be automatically migrated to new Photos app when it replaces iPhoto?

If history is any guide, and I'm not saying it is or it isn't, the new application will likely import your old photo libraries or access them directly.
However, as with all upgrades, we have to wait and see. None of us have a crystal ball into the future.
Frankly, I wouldn't worry about it.

LCM migration - Unable to see "Planning Dev Applications" Under "App group"

----- Situation ------
* We have hyperion 11.1.1.3.24
* Objective i- trying to perform a LCM file-migration from our DEV environment to UAT
* DEV has only one PMA enabled Planning Application (“budget”), few FR reports & other related artifacts.
----- So far --------
* Successfully Exported these 4 (Shared-services, EPMA, Planning & FR) from our DEV
* Successfully IMPORTED first 2 (Shared services, EPMA).
* Although the migration-Status shows failed in my case, noticed all the artifacts have been successfully Migrated. (Noticed Similar claims have reported in other posts as well.)
But, I am stuck on the Third Step, Planning Artifacts Imports. Since, I don’t see “Planning Dev Applications” Under “Application Group” (in shared-services console).
What Should I do. Any help would be greatly appreciated.
[do I have to create new Planning Application under the same name “Budget” in our UAT & start performing Import ? ]

Yes, you are correct. Thank you. I guess, either I am having some issues OR I am not doing something correct.
So far -
Created a test Planning App in workspace & Deployed. I can see that Planning App under ==> Shared-Services/Default-Application-Group.
Still Checking -
Tried to create a New Application Group (Under shared Services / Application Group) in our UAT. However, only getting the following options though.
APS Servers
Business Rules
Default Application Group
Essbase Studio Server
Essbase:Database server
Foundation
Reporting Analysis
I need to create a New Planning Application Group (in our UAT). Still checking on how to create one.

Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our system remote. A VPN connection is created, but I am unable to access servers on our network. This works on iPhone 4.

Using the personal hotspot feature on the iPhone 5, I am able to connect to the internet. We also use Juniper NCP client to access our local system from a remote location. A VPN connection is created, but I am unable to access servers in our network. This same functionality works using my colleagues iPhone 4.
Both phones are running iOS 6.1.3. I tried to reset network settings, but still unable to ping servers in our network. This is a feature that our sales team relies heavily on when out of the office. Hoping someone has some suggestions on what is different between the 2 phones.

Hi,
Generally, this issue should be related with something called split tunneling, since you’re using a F5 vpn client, you need to look for something related to split tunneling in the F5 VPN client's documentations.
Here is an example, share it with you as a reference.
http://support.f5.com/kb/en-us/products/big-ip_apm/manuals/product/apm_config_10_2_0/apm_config_networkaccess.html
In addition, you can refer to the link below for more solution about this problem.
You Cannot Connect to the Internet After You Connect to a VPN Server
http://support.microsoft.com/kb/317025
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

I have a mountain lion 10.8.5 version installed on my 2012 Macbook air but there is no Wireless Network application installed. Can anyone advise me how to fix this or get it installed, thanks.

I have a mountain lion 10.8.5 version installed on my 2012 Macbook air but there is no Wireless Network application installed. Can anyone advise me how to fix this or get it installed, thanks.

thank you Eric/Joe, what I actually was looking for is wireless diagnostic utility not the wireless diagnostic assistant as per your advise but have found the resolution right here http://support.apple.com/kb/HT5606

Local Area Network Application

Please I am trying to write a local Area Network Application that would work for an organisation.
I intend using RMI to approach it. But I would want to know if RMI approach to network programming as any security issues. Cause i want the application to be super secure. I would have used socket but i kind of find it difficult to use socket to develop complex applications. I would also appreciate if any one could help me with a tutorial that explains in details on how to use socket to develop complex applications.
This is my email address *[removed by moderator]*.
Or you could give me a link were I can download it.
Edited by: EJP on 16/06/2012 10:41: removed your email address. These forums are for public questions and public answers. If you want a private consultant, hire one.

Well, you would use sockets to implement a complex application just as you would to implement a simple application -- only your application is going to be more complex. You wouldn't use the sockets any differently in your complex application.
To find a tutorial about how to use sockets, your web search keywords are "java socket tutorial". Choose the Oracle tutorial from the list which you get from your search engine.
As for RMI: it's implemented using sockets, as is any Java application which communicates across a network. Whether it has any security issues -- I'm no security expert, but no doubt you can use a packet sniffer to see what it's sending. And since it sends serialized Java objects, it might be possible to reverse-engineer the packet sniffer's output to inspect the contents of those objects. Whether that counts as "super secure" is up to you when you clarify the term's definition.

Automatically upgrade any superseded versions of this application not auto installing - Status always waiting for next maintenance schedule

Hello,
I'm trying to deploy an application to a user group with the option checked for "Automatically upgrade any superseded versions of this application" but it never auto installs.
- The application is set to install to system whether the user is logged on or off.
- We do have user affinity, therefore the user does have a one or more primary devices setup.
- If I run the install manually, it will superseded and install the new application and uninstall the old applications.
- The estimated installtion time minutes is set to 0
- The maxmimum allowed run time is set to 120 minutes.
We're on version SCCM 2012 SP1.
My assumption of how it should work
If the user is logged in or NOT and it's during the maintenance window, it should auto install the application. Maybe I'm wrong.
Here's the scenario.
User JohnDoe has application Viewer 1.0 installed on his machine. He installed this app via the SCCM application catalog. We now need to deploy Viewer 2.0 of this application. I want to ensure when it's deployed it replaces Viewer 1.0 hence
the reason to check the "auto upgrade.."check box.
Here's what happens. In software center, it will pre-downlaod the software and then set the status to "Waiting for next maintenance schedule". The problem is that the status stays like this forever. We do have maintenance windows set
on the device collection that JohnDoe's primary device is part of. Here are our maintenance windows.
- Daily - 9PM to 5AM = 8 hours
- Weekly - Saturday - 12:00AM to 12:00 = 24 hours
- Weekly - Sunday - 12:00AM to 12:00 = 24 hours
Coordinated UTC is not checked.
The business hours in software center are set to 5am to 10pm.
One would assume that it would auto install during the night since we have a big maintenance windows. I checked the ServiceWindowmanager.log and it does seem to show the various maitnenance windows.
Here's what I've tried
- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
- If JohnDoe clicks install in Software center or application catalog, it works. There's nothing wrong with the packages. The issue seems to be related with the maintenance windows.
- If I disable the maintenance windows, then it seems to work but only when I'm logged in. It still does not work if I'm logged out. It only kicks off the installation when I login if it's not during the business hour set in software center.
We need the maintenance windows since we don't want windows patching to occur during the day.
- I searched and ran the report to ensure there's not another maintenance windows setup that would prevent this from installing.
Our current workaround
To ensure users are using the latest version, we deploy the application required for a couple of days, then delete that deployment once we reach a high 90%. The problem with that is if some computers are turned off, they would be using the older version
and it will never get upgraded unless the user installs it manually.
Has anyone encountered this? Any other log files I should look at? Anything else I should verify ? I know in SCCM 2012 R2, you can set the maintenance window to only apply this schedule to software update (patching) but that option doesn't seem
to be available in SCCM 2012 SP1.
Any help, suggestiong, I will take. Thanks.

- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
Re-check your deployment, specially the user experience:
If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
maintenance windows.

Does not automatically connect to recently used WIFI networks

Recently purchased 13" Macbook Air, with Lion installed. All's well, except upon start-up or waking up from sleep mode, it does not automatically re-connect to the WIFI network it was just connected to. Instead, I'd have to manually find the network to select it. (Incidentally, some of my friends who also use Macbook Air and Macbook Pros have also experienced this periodically.)
Another strange thing, is that there is this one particular WIFI network at work, that I've successfully connected to before, upon return the next time, all of a sudden, the network isn't even visible anymore. My OS5 iPhone sees it fine, and never has a problem, but repeatedly this happens. Other people at work who also use Macbook Pro and Macbook Air also encounter the same problem. People who are using PCs don't have the same experience.
Is there a setting somewhere? I have "Remember networks this computer has joined" checked, and I see the particular network listed as ones I've joined.
Any light that can be shed on this would be greatly appreciated. It's very frustrating, especially Airs don't have a built-in ethernet port. I hate using the adapter, it steals one of my USB slots.
Thank you in advance!

Hi sashton,
When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Thanks,
Matt M.

How to automatically generate a build file of the application from command-line

Hi All
How can we automatically generate a build file of the application from command-line (as opposed to using Jdev IDE to click to generate a build.xml) ?
Thanks

User, which jdev version do you use?
I don't think you can do this. You can only create an ant build.xml from the project inside jdev.
You can use ojdeploy to build the project. This is the only method which will also make the necessary changes to the descriptors.
Timo

HT5129 i don't want iPhoto 9.2.2 to "Automatically" migrate my old MobileMe account

i don't want iPhoto 9.2.2 to "Automatically" migrate my old MobileMe account because i already did this and it is taking forever
HELP!

Click on the More Info button, then go to iPhoto's Accounts preference pane and delete the MobileMe account. Next to go the Sustem/MobileMe preference pane and log out of MMe. That will stop those messages.
OT

Migration of XML reports over cross applications

Hi,
We are using FNDLOAD utility to migrate Concurrent programs for reports deployment.
How can I migrate my XML Publisher reports across applications instances, along with its Layout template ?
-Vani

Vani,
I found that the XML Publisher User's Guide contains this information in Appendix B. I have not fully reviewed this yet, but will try to accomplish the same thing this week.
-Susan

HT1222 Hi Does anyone know how can I stop my iPhone 4s downloading automatic system update so reducing my network speed when plugged in to charge or connected to the pc ??? I'm really ok with my iOS 5.0.1 and I don't need 5.1

Hi Does anyone know how can I stop my iPhone 4s downloading automatic system update so reducing my network speed when plugged in to charge or connected to the pc ??? I'm really ok with my iOS 5.0.1 and I don't need 5.1

Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Automatic migration of servers in a networked application

Similar Messages

Maybe you are looking for