LCM migration - Unable to see "Planning Dev Applications" Under "App group"

----- Situation ------
* We have hyperion 11.1.1.3.24
* Objective i- trying to perform a LCM file-migration from our DEV environment to UAT
* DEV has only one PMA enabled Planning Application (“budget”), few FR reports & other related artifacts.
----- So far --------
* Successfully Exported these 4 (Shared-services, EPMA, Planning & FR) from our DEV
* Successfully IMPORTED first 2 (Shared services, EPMA).
* Although the migration-Status shows failed in my case, noticed all the artifacts have been successfully Migrated. (Noticed Similar claims have reported in other posts as well.)
But, I am stuck on the Third Step, Planning Artifacts Imports. Since, I don’t see “Planning Dev Applications” Under “Application Group” (in shared-services console).
What Should I do. Any help would be greatly appreciated.
[do I have to create new Planning Application under the same name “Budget” in our UAT & start performing Import ? ]

Yes, you are correct. Thank you. I guess, either I am having some issues OR I am not doing something correct.
So far -
Created a test Planning App in workspace & Deployed. I can see that Planning App under ==> Shared-Services/Default-Application-Group.
Still Checking -
Tried to create a New Application Group (Under shared Services / Application Group) in our UAT. However, only getting the following options though.
APS Servers
Business Rules
Default Application Group
Essbase Studio Server
Essbase:Database server
Foundation
Reporting Analysis
I need to create a New Planning Application Group (in our UAT). Still checking on how to create one.

Similar Messages

Unable to see Planning Classic Application Administration 11.1.1.3

Hi Gurus,
I successfully installed full suit of Hyperion 11.1.1.3
When I go to workspace I can see Classic Application Administration for Consolidation, but I cannot see Classic Application Administration for Planning.
I re-configured planning as well but same result.
I am able to open EPMA dimension library, essbase and all rest of the products.
Does anybody have an idea why is it happening.
Thanks..........

Hi,
I got the solution. We need to re-configure web server under workspace and restart workspace & planning service.

Unable to see planning application and dimension menus under navigate tab

Dears
Unable to see planning application and dimension menus under navigate tab in EPM 11.1.1.1 workspace.
Is there any configuration lost?
All EPM service have already started.
Thx
Hector

I also don't see the menu under "Consolidation" or "Planning" applications. I can naviaget to these applications from Navigate -> Application ->Consolidation or Planning and I see a box with up arrow and down arrow. If I keep my cursor between these two boxes, or the boundary, sometime I could start my applications in these two modules. I checked context.properties in \Hyperion\home\deployment\Tomcat5\workspace\webapps\workspace\conf folder.
#Appended properties
#Sat Jan 17 14:14:43 EST 2009
Reports=Y
HFM=Y
HPSU=Y
HP=Y
HPS=Y
Analyzer=Y
BPMA=Y
ChangeManagement=Y
Subcontext.properties file is as follows:
Analyzer=WebAnalysis
Reports=hr
HMB=metrics
HPS=HPSWebReports
HFM=hfm
HP=HyperionPlanning
BPMA=awb
HFM-version=9.3.1
HP-version=9.3.1
HPS-version=9.3.1
HMB-version=9.3.1
BPMA-version=9.3.1
# Parameters for all contexts
#KeepAliveInterval=10
#SessionTimeout=30
#logon=bpm.logon
#startup=cds.mode
I also removed # character in the last four lines but I cannot see my aplications under "Consolidation" or "Planning.
This is in Hyperion 9.3.1 environment all my websites are working. Workspace, Shared Services etc. I checked all my servies and they are working ok.
http://lewisxphub:19000/workspace/index.jsp
Any Ideas?
Thanks
Jay
Edited by: Keerthi on Jan 29, 2009 4:31 AM

Unable to see the deployed application in BPM Workspace

Hi Every body,
We have developed the Project using Jdeveloper and it has deployed successfully. After that I login in Workspace with assigned user, I could't find the deployed application.
In Enterprise Manager I checked it shows it has deployed and I checked in in workspace login as a weblogic user and seen the assigned role,it has assigned currectly but I am unable to see the deployed application in BPM workspace. Can any body help on this.
Thanks in advance.

Hi
Try this. Log into the Workspace using weblogic user. Go to the Administration option (up and right if I'm not wrong) and check if the roles that you create for the process has the users correctly assigned.
Regards,
isabelbernely

Unable to read information of application in app store. Still can download but unable to read the application infor before downloading

Hi,
Please help, unable to read information of application in app store. Still can download but unable to read the application infor before downloading.
I'm using iphone4, ios 6

Yes it sounds like your application could be corrupt.
First I would make sure you don't have a program like backup software or virus protection trying to read the files when you try to start the application. If not,
Do you have any backups or data exports? If so, I would try to restore them for the application
If you do what EsbHelper suggests, you will have to recreate the database. I think he is missing a few steps.
If you are going to try to recreate the application, you need to copy your outline rules files calc scripts and report scritps (.otl, CSC, REP and rul files) to s saved directory.
If you delete the directory using the file system, you orphan things in the security file. It's better to try to do it from EAS.
Once it has been deleted, and recreated from EAS, then copy back in the objects. You will have everything but data and security. those will have to be recreated.
As aI said first, the best way to do this is from some sort of backup. othersiwe it can get a bit messy

HT2731 I am unable to buy any of applications on App Store as it is not accepting any of cards and doesnot show option for credit card

I am unable to buy any of applications on App Store as it is not accepting any of cards and doesnot show option for credit card.
Thanks

Try this to change your payment method: http://support.apple.com/kb/PH12507

Trying to resolve a blinking amber light on my Time Capsule. The problem is i don't see the airport utilities under Apps/Utilities..any ideas?

trying to resolve a blinking amber light on my Time Capsule. The problem is i don't see the airport utilities under Apps/Utilities to try and reset..any ideas?

AirPort Utility should be here: Macintosh HD > Applications > Utilities > AirPort Utility
If it is not there, you can download it from here:
http://support.apple.com/downloads/#airport
Temporarily, connect an Etherent cable from your Mac to one of the LAN <-> ports on the back of the Time Capsule
Open AirPort Utility - Click Manual Setup
Click directly on the word Status (2nd line) and a window will open to explain why the Time Capsule is complaining along with suggested actions to remedy the issue

Unable to See Planning App in EAS

Planning 11.1.1.3
New application created today. Native user in local Shared Services. Provisioned with all access to Planning. Created dimensions, created first form. Cannot see users to give access to form. New BR cannot see new Outline. Admin cannot see Planning cube in EAS at all. Cannot assign new owner to application. No users are seen by Application (registered) in Shared Services.
Other planning apps exist, and such objects are visible. Copied provisioning from one app to the new app. Synchronized security in EAS. Still invisible.

If other application are working without any problem, can you not delete the planning application and try again, something may have gone wrong.
If not can you refresh planning? Can you provision any users against the application in Shared Services
Cheers
John
http://john-goodwin.blogspot.com/

Unable to see planned order in APO

Dear Experts,
I'm creating a Project manufacturing order in ERP. After that I do MRP run in SCM7.0. When I check in Product View (transaction /SAPAPO/RRP3), I do not see any planned order, though I can see orders in ERP (Tcode-md04).
I guess transfer of network to APO is not happening.
Same problem arises when I schedule a dummy project in ERP and after I do MRP run in SCM7.0, I do not see any planned order in planning board.
The MRP run in SCM7.0 shows no error and no warnings and everything appear in green.
I was able to see planned orders in APO before there was system upgrade from SCM 4.2 to SCM 7.0.
Please provide some clue to solve this problem.
Regards,
Jyoti

Hi Jyoti,
There will be an "Iterate" button on the left hand corner in the result display of CCR. Please click on this button so that these errors will get iterated and goes to the respective distinations. After this, you go to smq1 and smq2 trasnaction codes of R/3 and clear all the queues. Similarly you clear the queues in smq1 and smq2 transaction codes of APO. Afterwards, check whether you are able to see the planned order.
Please confirm
Regards
R. Senthil mareeswaran.

Unable to see Planning application under calculation Manager

Hello All,
I created a Planning application in workspace and choose the Sahred Service Project as APS server.Now I want to create business rules.For that when I m lunching Calculation Manager from workspace, I m not able to see the appliaction that I had created before ,under Planning option of Calculation Manager.
Thanks.......

I think you created a classic planning applications. Calc manager will not recognize classic planning applications in version 11.1.1.2 and prior.
You need to create a planning applications via EPMA and then you will see this in calc manager. If you have already opened calc manager, right click on the Planning node and do a refresh to synchronize the applications from EPMA.
Hope this helps.
~SM

Unable to see Planning applicaiton in workspace 11.1.1.1

Hi there:
I have created a planning application via classic app wizard (coz I can't see the classic app link in workspace). After created the app I was able to access directly via server:8300/HyperionPlanning but I was not able to see the application link under the navigation menu in workspace. I have check the contect.properties file in Tomcat directory and the hp is N and I changed it to Y but it is still not working. I checked the config utility under reporting and analysis but there's no option for web server configuration. Ther only 2 options that I have is FR server and Deployment to App server.
Am I missing a installation or assemblies for the web server/Apache install?
Thanks,
Mike

Hi,
You said "I have check the contect.properties file in Tomcat directory and the hp is N" and you changed it to Y, you shouldn't have had to manually change it, is it possible you can configure the "Configure web server" again.
You can test whether the apache plugin is working by going to http://<planning machine>:19000/HyperionPlanning/
or if you are using iis http://<planning machine>/HyperionPlanning/ and using the default port 80
Cheers
John
http://john-goodwin.blogspot.com/

Im unable to download or update applications from app store

Why am i unable to download applications or update applications downloaded from my App Store? please help!

The App Store seems to be down for everyone right now. Try again in an hour or so.
Check here to see if it is up.
http://www.apple.com/support/systemstatus/

Unable to view the "Discovery Application" section under studio.

Hello,
I have installed OEID 3.0, using integrator I have loaded the sample getting started application to the server successfully.
I am following the instructions given under the getting started guide, after loading the data to the server I am able to login successfully to studio http://localhost:8101.
However in the login screen I am getting only the "welcome Admin Admin!" menu, under which I am unable to see the Discovery Application section.
But I followed the guide to access the control panel and change the default datasource, as per the guide I clicked "Back to home" but still Discovery Application section is not visible.
Which is obviously used for creating and managing the applications.
But I managed to create the application by selecting control panel > Portal > Application and I created the application and managed to load the EID_3.0_SampleApp.LAR file and able to successfully launch the studio.
Can anyone kindly let me know why I am unable to view the discovery application section till now?
Thanks.

I don't completely follow yet what you are seeing in your Studio instance. Is your "Discovery Applications" panel not showing, or is it empty, or is the "New Application" button missing? Perhaps you could paste a screenshot somewhere and link it here.
You say you are having problems with datasources - could you paste your data source JSON, and any error messages you are getting in the Studio logs?

Unable to see deployed process in Business process workspace

Hello ,
I am using BPM Suite 11gR1 in Oracle Jdeveloper. As using Hello world sample, I deployed the process successfully at weblogic server But i am unable to see the deployed application bpm/workspace (Business Process Workspace).
How can i make sure this? There is no exception in server logs.
thanks

Thanks MSR.
I have other Web Dynpro applications that I have succesfully deployed and they display correctly in the WDP Content Administrator.
The application in question is fine up until the point I activate the changes. So using NWDS I build and deploy the application, and it shows correctly in the Content Administrator. Once I activate the Activity I can no longer see the contents of the DC through the Content Administrator.
So what I see in our development environment is:
+ rd1.com/WorkingOK
+ Applications
+ Components
+ Models
- rd1.com/NotWorking
(The rd1.com/NotWorking node cannot be expanded)
Therefore I can no longer run the NotWorking application or transport it into QA/Production.
I have noticed that in the Development Configurations perspective in NWDS that the DC in question does not have src/packages/ProjectProperties.wdproperties

Unable to see the planning applications

Hi All,
I'm using hyperion 11.1.2. I've created a planning application in workspace. Now if i'm using the URL http://localhost:8300/HyperionPlanning, i'm unable to see any planning applications in the drop down ? where as i'm able to access applications in workspace. Do i need to make any settings to see the applications using this URL ? Pls. advice
Thanks,
PVR

As it looks like you only need the default cluster I would start up the configurator, select planning, manage planning clusters.
Choose "Re-Associate Cluster and Application", select default and choose an application, apply, repeat this for all the planning applications.
Choose Activate Cluster, select default.
Then you can delete the cluster that is not needed.
Cheers
John
http://john-goodwin.blogspot.com/

LCM migration - Unable to see "Planning Dev Applications" Under "App group"

Similar Messages

Maybe you are looking for