Settlement rule generation

Hi all.
I am using line item settlement. using investment projects.
Unable to generate the settelemnt rule for the lower level WBS elements. while settling from WBS to AUC
1. Created project (throught AR) with one one level WBS element (top level), planned cost, released budget, posted actual. now while doing settlemnt, i am able to generate settlemnt rule for top level WBS element automatically and settlemnt is done.
2. Created project (throught AR) with TWO level WBS elements (top level and 2nd level), planned cost, released budget, posted actual and while doing settlemnt, i am unable to settle, as system is asking me to maintain settlemnt rule for the 2nd level.
is there a way to generate settlemenmt rule for 2nd level automatically, as i have mainitained settelemnt strategy 40, to take the settlement rule from superior WBS.
i have checked it with CJB2 also, and it giving an error ORB501.
regards
Edited by: Surya Pampana on Oct 12, 2010 12:25 PM

Thanks for all the inputs.
Ahmed, i have implement the note 211323 and its relevent notes, still not working.
Ok, if i have to maintain settelemnt rules manully, how to maintain at level 2.
FYI: both level 1 and level 2 are account assigned
Now i have to maintain the settelment rule for 2nd level as : from level 2 to level 1?
pls suggest
Regards
Surya

Similar Messages

Automatic Settlement rules generation

PS Experts
I need to have automatic settlement rule generation for WBS elements.
I do have all the config (PS & IM) in place and when i release my WBS element then AUC is automatically created and no settlement rules are generated at this point.
But when i create FINAL ASSET, then the settlement rules are generated automatically with final asset as the receiver. When i run my final settlement (CJ88) then the settlement rule is updated with AUC & Final asset.
My question is do i need to have Investment profile to have automatic creation of settlement rules.
What if i don't want to activate IM and still have automatic settlement rule generation?
Edited by: Raj M on Apr 17, 2008 8:49 PM

Hi,
For automtic settlement rule generation folloowing steps need to be followed.
1. Determine Strategy for Settlement Rule
In this there will be settings for settlement rule where we define the recevier cost object after project settlement.
This strategy will be assigned to project profile
2. Generate Settlement
CJB2 transaction need to be run for generation settlement for the WBSE.
Hope this will help you.
Regards,
Rakesh Pradhan

PS - Automatic Settlement Rule Generation

I am currently setting up the automatic settlement rule generation in Project Systems and running some tests to make sure it works properly. I am running into an issue involving the newly generated settlement rule overwriting an existing settlement rule that was entered manually.
To generate the settlement rules, I run transaction code, CJB1 for multiple projects. I am doing it in a batch process, run for a range of projects from 1 - 1000..
Is there a way to distinguish the projects with settlement rules so that a rule isn't generated?
Any thoughts are greatly appreciated.
Thanks!

Hi,
I think you can look for following things-
1. In the selection varaint itself you can mention the project numbers, which you want to have the setllement rules to be generated for. This can be done only if you know the projects which need not to be included in the list of selection.
2. Or else when the settlement rule is already created for the WBS it has the system status as "SETC". You can use this in the selection profile.
Thanks

Auto generation of settlement rule for PM orders that are Investment Measur

Hi all
Has anyone successfully automatically generated settlement rules on a PM order that is an Investment measure? The settlement receiver would be an asset. User exit IWO10027 doesn't work. Std settings don't work either because a settlement rule is auto generated for the AUC on the order during settlement (Note 195607) because of IM.
Any ideas?
Thanks
CC

for a PM order as investm,ent measure the system assumes that you wish to create an AuC hence no other settlement rule generation is allowed
you can try by removing the asset class in the IM profile

About Generating Settlement Rule in Customer Project

Hi Experts,
I am doing the exercise of customer project T-100## in CA830.
While generating the settlement rule, the error log appeared: No profitability segment could be determined for the billing elements. So the settlement rule generation failured.
May somebody guide me how to solve this problem.
Thanks in advance!

Hi Balakrishman,
In my case, the fields of Business Area/Profit center have already been maintained. I think there must be other reasons that result in these error. Hope we can discuss further. Thank you for your help!
Regards,
Allen

Generation of WBS Settlement Rule

Hi Folks!
I was wondering if there is any function module that allow me to generate a WBS Settlement Rule for a specific project and for elements on level 3.
If there is no FM for this, is there any workaround to do this.
Thx for any advise.
Regards,
Gilberto Li

Hi Gilberto,
Hm, not a question that has a simple answer. Settlement rules are first of all defined in customizing how the should be behave and secondly lies the question how to update a CO cost object with this settlement rule.
Let us first assume that customizing is done with a settlement profile named ZZ_PROF for instance. This is defined in customizing like path (from R/3 4.7): Trans SPRO -> Project System -> Costs -> Automatic and Periodic Allocations -> Settlement -> Settlement Profile -> Create Settlement Profile.
My first advice would be to use the "automatic settlement derivation feature" that can be setup in customizing alike. Trans SPRO -> Project System -> Costs -> Automatic and Periodic Allocations -> Settlement -> Settlement Rule for Work Breakdown Structure Element. Read the docu for this node (right click and choose Display documentation) to understand what possibilities and limitations this functionality has. Below this node you have the possibility to define a "settlement strategy" and allocate this to a project profile. There is also an option to define a BADi whereby you you can somewhat influence the automatic generation of settlement rules. You must "obey" the rules in the "settlement strategy" but can do some filtering of SD orders influence and derive a "settlement strategy" baseed on some coding logic of your choice.
To execute these settings on operative projects you run trans CJB1 (collective processing) or CJB2 (indicidual processing).
All in all: This is good functionality but maybe not what you are looking for due to the built in "restrictions" in the "settlement strategy" profile.
My second advice would be: What I did in the past was to write a batch input program that was run just before period end closing (that is before settlement - of course) that did read all relevant WBS elements without a settlement rule and derived a new settlement rule. Finally, updated the setttlement coding block with this info. Processing of the BDC is then done via trans SM35 the normal way.
I also did a check for trans CJB2: In include LKAZBF15 there is the "magic" call to the update FM with name KSRG_GENERATE_RULE. One option could be to set a break point here and run the trans to see what parameters has to be filled. This implies that the customizing is done before, of course. I have a feeling that this is NOT the easist solution to use - to fill the parameters correctly may be difficult
I hope this helps you in deciding what action to take.
Sometimes a simple BDC will do the trick although it may not be a "good" solution.
Disclaimer: There might be some other relevant FM to solve your problem as I am not aware of. If you find one for WBS elements then I would certainly be interested in any findings.
Regards, Johan

Production order: Automatic Generation of settlement rule .......

Hi Gurus,
I am trying to settle a production order to a cost center. I have already define a settlement profile with Cost center as the default reciever and assigned it to the Order type but when I tried to settle it, I have to create a distirbution rule manually every time. Is this some thing to do with the strategy sequence? I have done a lot of research but the system doesnt give me any option for autmatically generating a settlement rule or assigning strategy sequence to order type for production order. I found some thing for Internal orders, but still i cant do it. Would any of you please help me. I would appreciate if you put the steps with the trxn codes.
Thanks

Dear.
As I know, there're no way to generate settlement rule of production order automatically such as that of WBS(network).
In settlement profile, If you want automatic fuction, you can only set PA segment as receiver addionally.
What you want to do is the price difference(PRD-PRF) of production order be settled? then, why don't you make automatic account assignment(OKB9)?
Generally, assumed using PA segment as receiver, we don't make price difference account as cost element, But, In your case, If you want to settle all amount of that to fixed cost center, specify that cost element to cost center by OKB9 instead of adding cost center in settleme rule.
Regards.

Automatic Generation of Settlement Rules for PM order

Hi All,
I am doing a maintenance orders settlement and I have the fallowing issue:
My client has 2 types of equipment, namely vehicles and industrial equipment. Both have particular rules.
For vehicles, we need to control all cost by an internal order
Industrial equipment costs will be control by cost center.
So, cost center is maintained for industrial equipment, and Settlement Order for vehicle equipment.
I have a unique order type for which in Settlement profile I have entered Order and Cost Center as 'Settlement Optional' and default object type as CTR.
When I create a PM order for vehicle, system cannot generate automatically the settlement rule, because in order type I have entered default object type as CTR and in equipment I just have the Settlement Order.
But if I create a PM order for industrial equipment system create automatically the settlement rule, because cost center is maintained for industrial equipment and order type has default object type as CTR.
In the allocation structure I have a receiver category for CTR and ORD.
So, Could you help me how to generate automatically settlement rule for both cases without 2 order types?
Thanks & regards,
Hélder Nunes

hi
i think it is not possible to generate settlement rule based on equipment ,if you have specified the default settlement category in IMG ,it will be generated .
check with your technical team whether user exit IWO10027 can be mapped
regards
thyagarajan

Automatic generation of settlement rules

Hi
I want the system automatically create a settlement rule to to settle costs from Plant Maintenance orders directly to assets but when you look at the strategies available, there is nothing for Sender type ORC (Internal orders). Even under sender type ORI (maintenance orders), there is no option available. Does anyone know of a way I can accomplish this?
Thanks

Check the settlement profile/allocation structure that is assigned to your order type. You may want to explore creating a new profile and/or allocation structure that will allow settlement to fixed assets.
SPRO->Plant Maintenance and Customer Service->Maintenance and Service Processing->Basic Settings->General Order Settlement
From here, you can maintain settlement profiles and allocation structures. Depending on your situation, you may need to assign your specific order type to default to the new profile/structure.

Automatic creation of settlement rule while creating sales order

Hi Friends,
Can any one help me how to create settlement rule automatically while creating sales order i.e saving sales order. Is there any function module or any badi which can be used.. please suggest.
thanks
bobby

Hi,
Here is the solution , First Create a sustitution by going into OPSN Transaction , only user exit say 'U902'
and write the form routine in Program named 'ZRGGBS000'
The code is below ,
*&      Form U902
   Automatic Generation of Settlement Rule For WBS and Company 4180
FORM u902.
Exit For Automatic Settlement Rule Creation for WBS Billing elements
IF sy-tcode = 'CJ20N' or sy-tcode = 'CJ01' or sy-tcode = 'CJ02'.
    DATA   lv_proj TYPE ps_pspid.
    lv_proj = proj-pspid.
    EXPORT lv_proj TO MEMORY ID 'PSPID'.
Calling YGPS_CJB1EXEC Program For Creating Settlement Rule
    SUBMIT ygps_cjb1exec AND RETURN.
ENDIF.
ENDFORM.                                                    "u902
*& Program YGPS_CJB1EXEC
PROGRAM ygps_cjb1exec.
   Automatic Generation of Settlement Rule For WBS and Company 4180
Called From Exit For Automatic Settlement Rule Creation for WBS Billing elements
DATA: bdcdata_wa TYPE bdcdata,
      bdcdata_tab TYPE TABLE OF bdcdata,
      itab TYPE TABLE OF bdcmsgcoll.
DATA :lv_currm LIKE bkpf-monat,
      lv_curry LIKE bkpf-gjahr,
      lv_prevm LIKE bkpf-monat,
      lv_prevy LIKE bkpf-gjahr,
      lv_proj TYPE ps_pspid,
      lv_mode TYPE c,
      lv_time TYPE sy-uzeit.
DATA :g_datfm            LIKE usr01-datfm,
      g_dd(2)            TYPE c,                         " Day
      g_mm(2)            TYPE c,                         " Month
      g_yyyy(4)          TYPE c,                         " Year
      g_sydatum(10)      TYPE c.
IMPORT lv_proj FROM MEMORY ID 'PSPID'.
lv_mode = 'N'.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'PRZB-VARIANT'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'PRZB-VARIANT'.
bdcdata_wa-fval = 'ZGPS0001'.
APPEND bdcdata_wa TO bdcdata_tab.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    bukrs = '4180'
IMPORTING
    currm = lv_currm
    curry = lv_curry
    prevm = lv_prevm
    prevy = lv_prevy.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-FROM'.
bdcdata_wa-fval = lv_currm.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-GJAHR'.
bdcdata_wa-fval = lv_curry.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VARC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'RKPSEL00'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'CN_PROJN-LOW'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PROJN-LOW'.
bdcdata_wa-fval = lv_proj.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PSPNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_NETNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_ACTVT-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_MATNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '/00'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=SAVE'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VBAC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSPO1'.
bdcdata_wa-dynpro   = '0100'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=YES'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-BATCH'.
bdcdata_wa-fval = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-TEST'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=RUN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKABA'.
bdcdata_wa-dynpro   = '0210'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-JNAME'.
bdcdata_wa-fval = 'CJB1_EXEC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_SUBSCR'.
bdcdata_wa-fval = 'SAPLKABA'.
APPEND bdcdata_wa TO bdcdata_tab.
Extract the date format from the user settings
PERFORM f_get_dateformat CHANGING g_datfm.
Changing the current date format to User Profile Date Settings
PERFORM f_format_date USING   g_datfm
                              sy-datum+4(2)
                              sy-datum+6(2)
                              sy-datum+0(4)
                     CHANGING g_sydatum.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STDAY'.
bdcdata_wa-fval = g_sydatum.
APPEND bdcdata_wa TO bdcdata_tab.
lv_time = sy-uzeit + 30.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STTME'.
bdcdata_wa-fval = lv_time.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-PRIKZ'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=TAKE'.
APPEND bdcdata_wa TO bdcdata_tab.
Calling Transaction 'CJB1' for creating settlement rule
CALL TRANSACTION 'CJB1' USING bdcdata_tab MODE lv_mode .
IF sy-subrc = 0.
ENDIF.
*&      Form F_GET_DATEFORMAT
      This subroutine returns the date format in the user setttigs
     <--P_G_DATFM Date Format
FORM f_get_dateformat CHANGING p_g_datfm.                   "#EC *
SELECT SINGLE datfm FROM usr01 INTO p_g_datfm
WHERE bname = sy-uname.
ENDFORM.                    " F_GET_DATEFORMAT
*&      Form F_FORMAT_DATE
      This subroutine returns the date as per the user settings
     -->P_G_DATFM Date Format
     -->P_G_MM Month
     -->P_G_DD Day
     -->P_G_YYYY Year
     <--P_G_DATE Date
FORM f_format_date USING    p_g_datfm
                            p_g_mm
                            p_g_dd
                            p_g_yyyy
                   CHANGING p_g_date.                       "#EC *
CONSTANTS: c_dot VALUE '.',
             c_slash VALUE '/',
             c_dash VALUE '-',
             c_1 VALUE '1',
             c_2 VALUE '2',
             c_3 VALUE '3',
             c_4 VALUE '4',
             c_5 VALUE '5',
             c_6 VALUE '6'.
DATA: l_day(2),
        l_month(2).
l_day = p_g_dd.
l_month = p_g_mm.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = l_month
    IMPORTING
      output = l_month.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = l_day
    IMPORTING
      output = l_day.
CASE p_g_datfm.
    WHEN c_1.
      CONCATENATE l_day l_month p_g_yyyy INTO p_g_date
          SEPARATED BY c_dot.
    WHEN c_2.
      CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
       SEPARATED BY c_slash.
    WHEN c_3.
      CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
          SEPARATED BY c_dash.
    WHEN c_4.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_dot.
    WHEN c_5.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_slash.
    WHEN c_6.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_dash.
ENDCASE.
ENDFORM.                    " F_FORMAT_DATE
thanks
bobby

Automatic Allocation of Settlement Rule on WBS

Hello,
I am facing issues with automatic population of settlement rule in Expense Projects. I have a scenario where I need to settlement to Cost Centres,G/L etc. Now I have maintained a settlement strategy for WBS in configuration. However in that config the account assignment option is only for PSG, responsible CC and requesting CC.So I have left it blank and just assigned the settlement profile.
Is there any way to automatically fill the settlement rule. What will be the ideal way to deal with this situation? Manual or just maintain default receiver as responsible CC.
Please let me know if anybody has experience in above.
Thanks

You'll need to use Business addin for automatically generating settlement rules for expense projects with receiver as req cost center.
Check the documentation at:
SPRO=>PS=>Cost=>Automatic and Periodic Allocations=>Settlement=>Settlement Rule for Work Breakdown Structure Element=>Business Add-In: Generation of WBS Element Settlement Rule (CJB1/CJB2)

CJ20N : Settlement Rules Heritage on unique IeC WBS Element

Hi Experts,
I've customize PS for an investment project, who have a stategy for top down heritage of the settlement rules from the project definition, and an automatic generation of an only IeC (on first WBS element) when the entire project is launched from the project definition.
All settlement rules are settled to the first WBS element (WBS project), who becomes the IeC.
Heritage is OK on all WBS elements and I can see them under "Edit -> Costs -> Settlement Rule".
When I try to see my seetlement rules on the first WBS Element (WBS project), the system turn in loop and dump after 2 minutes (time over message).
In my opinion, the error comes that the system permiss to affect the settlement rule (for exemple WBS -> I/0001) on his own object (WBS ID I/0001) . They have no error message when I save the project for the heritage.
After this operation, impossible to go back under "Edit -> Costs -> Settlement Rule" to see the settlement rules of this WBS Element.
For more information, I don't want the create the heritage to level 2 or 3 of my WBS elements structure, because I don't want to loose a level (coding mask I/XXXX.XXXX.XXX.XXXX).
Does an expert have a solution to resolv my problem ?
Thanks in advance for your assistance.

Hi herieric ,
The program should not enter into an endlos loop in such case. It is rather a program error than a consulting issue. You can copy the key words from the dumps and search the notes. If there is still no suitable notes, create a customer message and ask SAP for support.
Kind regards,
Zhenbo

Massive change of settlement rules in Sale order

HI,
CAN ANYONE ADVISE ME ON THIS TOPIC:
I NEED TO "REFRESH" THE PROFITABILITY SEGMENT IN THE SETTLEMENT RULES OF THE SALES ORDER, AS SOME OF THE CHARECHARISTICS WERE CHANGED AND AS LONG AS I USE THE "OLD" SETTLEMENT RULES IT GIVES ME THE OLDER CHARECHATERISTICS.
I WAS THINKING OF DOING A MASSIVE CHANGE TO SETTLEMET RULES - BLOCKING THE PREVIOUS SETTLEMENT LINE AND OPEN A NEW ONE
DOES ANYONE HAS AN IDEA OF HOW TO DO IT ?
THANK YOU
AMALIA

Hi,
1. Please check your customizing in SPRO -> Sales and Distribution -> Basic Functions-> Account Assignment/Costing -> Automatic generation of settlement rules.
2. Have a derivation rule in COPA (KEDR) which will post the changed value to COPA during settlement. If the settlement rule is not automatically adjusted and if you don't change the old value afterwards manually on the profitability segment screen of the settlement rule final derivation (at time of creation of the CO-PA line item) would overwrite the wrong char value for the line item - without any impact on the settlement rule itself.
regards
Waman

Settlement rules not getting created

Hi,
During period end, all 2nd level WBS elements are generally settked to AuCs. I had maintained the settlement strategy in such a way that all the WBS elements below 2nd level are settled to its Superior. When i tested this in one of the Client, it worked fine whereas in the new client, when I execute CJB2, system gives the message "processed with no errors", however when I check the WBS element, settlement rules are not created. What could be the problem ?
thanks in advance.

Hi
A copy of text ( donot know anymore, where I got it):
Only the wbs element with investition profile, which has the 'manage
Auc' (technical field INVMA ), will be excluded. In this situation
the automatisch generation of settlement rules is not useful.
In other case, that the wbs element has a investition profile, but
the investition profile do not has the flag 'manage Auc' ticked, is not
considered as a accompanying measure. In this situation, a autom.
settlment rule generation can be useful, that why the program do not
exclude such wbs elementen.
Please notice, in this issue, only the customizing setting of investiti-
on profile is involved, not the settlement rules.
you can take a small modification, which remove the check of the
'invma' of inves. profile, which is programed purposefully.
include LKSRGF01    form process_block
      general checks
        if not lt_prps-imprf is initial.
          call function 'IM_TAPRF_READ'
               exporting
                    i_ivpro = lt_prps-imprf
               importing
                    e_taprf = ls_taprf.
          if not ls_taprf-invma is initial. "invest object      " delete
            add 1 to stats-sal_0.      "couldn't be handled
            perform wla_confirm_proc_status
                      using p_rsthie_block-name(22)
                            kpepw_objstat-not_relevant
                            space
                            check_messages-off.
Kind regards,
Zhenbo
Edited by: Zhenbo Wang on Jul 13, 2009 5:27 PM

Default settlement rule with settlement type as FUL for service orders

Hi Folks,
Could you please advise me on the below issue?
Requirement: setting up of default settlement rule with default settlement receiver as u201CCOST CENTREu201D and settlement type as u201CFULu201D for the maintenance orders (Order category u2013 30).
I was trying to configure the same in transaction KSR3_ORI to assign the strategy to the service order type by clicking u201CNew Entriesu201D system not showing the drop list for the status column which is a mandatory field.
We have applied the below notes:
Note 313454 - Info: Default value for settlement type
Note 851975 - Settlement use automatic generation creates
Could you please guide us to get the default settlement rule for service orders along with settlement type as u201CFULu201D

I was also with this problem in 2013 january and only found some information about this, here.
Our solution was change the Maximum number of distribution rules in Maintain Settlement Profiles to 1, because we wanted the FUL rule and it is always in the first line.
Now, for curiosity, I was search for another solution and found the SAP note 2028108 that explain that is not possible to change the strategy for PM/CS orders.
This note was released at 09.06.2014

Settlement rule generation

Similar Messages

Maybe you are looking for