Autosave for user ID and password in the web

I got a new E71 replacing a Windows PDA and I don't find the way to automotically save the usier IF and the password when accessing URL whic demand it. I need to to type once and again.
I use to have it in my windows PDA. Can anybody help me and indicate how to do it??
Thank you

Hi,
Create a favorite->add other object-BSP APPLICATION
enter the following
BSP APPLICATION - CRM_UI_FRAME
Start Page - default.htm
in parameter add the following two parameters
sap-user - value ishould be your user name
sap-password - value should be your password.
you can also create a internet explorer favorite by adding the same parameters to the original link. i.e.
http://sap/bc/bsp/sap/crm_ui_frame/default.htm?sap-user=(user name)&sap-password=(password)
save the favorite. and now when you double click on this favorite, it will launch web UI and won't ask for the password.
Regards,
Kamesh Bathla

Similar Messages

IAC view and BSP iviews gives pop up for user id and password

Hello All,
I am facing a problem in quality portal.
we have SSO configuration between Portal and ECC system and the Jco connection using SSO with login tickets are working fine,test and ping both are succesfull.
The ESS and MSS webdynpro application are also working fine.
But the IAC iviews and BSP iviews says "session managment will not work ! Please check the DMS log files for details" and then ask for user id and password of the ECC system,But the system alias that i am using,is configured for SSO with logon tickets.
same iviews are working fine in devlopment system with system alias with SSO Login tickets but in qa it is asking for id and password ...
I have checked all the system properties also FQDN of ECC system is also maintained.
Please suggest what could be the issue ??
Thank you,
Regards,
Gunja

Hi,
When messages about Session management popup then it is 99% an FQDN issue, but you say you already checked it.
Did you also checked the parameters:
- ITS Host Name
- Web AS Host Name
... in your system object?
Cheers,
B.

Firefox asks for user name and password even though the proxy auto detection

After upgrading Firefox to ver. 6.01 and next to 6.02 Firefox asks for user name and password of proxy server even though proxy settings are set to Automatic detect proxy settings.

Sorry can't do anything more than offer support. We have been having this problem for months and support is clueless. Do you also have the migrating homepage issue? We can have 3 or 4 different homepage set-ups throughout the day. Between Verizon and FIOS, there isn't an employee in the corporation who cares about customer service. Since the failed email migrations dating back to Spring of 2011, we have had this login situation constantly. Our normal login count for a day is 12. We figure they are regulating traffic by having customers constantly login.

ADF security - prompt for user id and password again on page forward

Hi,
I am working with ADF using JDeveloper 10.1.3 with Business Components and ADF Faces.
I have a Search page and a List page.
Both pages are based on the same view within the same application module.
The Search page is using the default Find and Execute Operations.
The Execute button has an action that navigate to the List screen.
faces-config.xml
<navigation-rule>
<from-view-id>/jspx/search.jspx</from-view-id>
<navigation-case>
<from-outcome>search</from-outcome>
<to-view-id>/jspx/list.jspx</to-view-id>
<redirect/>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/jspx/list.jspx</from-view-id>
<navigation-case>
<from-outcome>find</from-outcome>
<to-view-id>/jspx/search.jspx</to-view-id>
<redirect/>
</navigation-case>
</navigation-rule>
Security (Roles and Users) is based on the jazn-data.xml and web.xml
URL Patterns for the pages have assigned to the role.
Login Configuration is HTTP Digest Authentication
<web-resource-collection>
<web-resource-name>APP_SUPPORT</web-resource-name>
<url-pattern>faces/jspx/search.jspx</url-pattern>
<url-pattern>faces/jspx/list.jspx</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>APP_SUPPORT</role-name>
</auth-constraint>
<login-config>
<auth-method>DIGEST</auth-method>
</login-config>
Everything is fine when running the application from JDeveloper,
but when the application is deployed to the server (OC4J),
After logging into the system, the Search page prompt for user id and password again
on click of the Execute button.
Have anyone experience this problem before?
Thanks for any help.
Jim

Hi,
does the same thing happen if you change your protected resource from:
<web-resource-collection>
<web-resource-name>APP_SUPPORT</web-resource-name>
<url-pattern>faces/jspx/search.jspx</url-pattern>
<url-pattern>faces/jspx/list.jspx</url-pattern>
</web-resource-collection>to:
<web-resource-collection>
<web-resource-name>APP_SUPPORT</web-resource-name>
<url-pattern>/faces/jspx/*</url-pattern>
</web-resource-collection>Brenden

Prompt for user id and password during transfer of BI content for install

Hi! I am trying to install the BI content for SRM. When I select the appropriate data source and transfer, the system will start the transfer and half way through will prompt me to enter the user id and password to the ECC backend system. It will continue the process once I keyed in the id and password. I also get a prompt to logon with user so that the system can check whether I am authorized in BW to transfer datasources into the source system from from the content. I usually reply OK and will have to key in the user id and password again. This time, it will be to the SRM system.
Any idea whether this is normal or is there something missing in the set up? I have checked the RFC connection and it can connect when I tested the connection via SM59. The ports are also working.
Appreciate any help on the above.
Cheers!
SF

Hello,
It is normal only..whenever you try to install Business content which involves the Transfer rules or datasource replicata then it will go to the source system and checks whether active version of Datasource is available or not..
Fiirst activate the datasource in Source system and then install the flow in BI/BW.
Hope it helps you..
Regards,
Srikanth

I kept all my site-specific user IDs and passwords in the "notes" section under Organize Bookmarks. I can't find Organize Bookmarks any more, and the Show All Bookmarks doesn't have this feature! HELP!

Many sites require me to set up an account, and all have differing requirements for user names and passwords. In the old Firefox, in the Organize Bookmarks section, when you look at any bookmarked site, there was a place at the bottom (More...) where you could write notes to yourself. I used this space to write down my username and password for that site. Since I only visit some sites annually (to renew membership, etc or pay annual dues) I can't remember the passwords or user names. PLEASE tell me I haven't lost all that information! If I've lost all those passwords and user IDs I'm royally screwed! Thanks

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox profile folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file

Repeated requests for user name and password

I am suddenly getting repeating requests to provide my user name and password but the requesting screen already has this information filled in. Each time I press OK the request returns. Is this a server problem?
Solved!
Go to Solution.

A quick look through this board will reveal that this has been an intermittent problem with BT Yahoo! for ages and is one of the reasons are moving to a new BT Mail (which itself has stalled because of problems). Meanwhile, logging in direct to webmail then out again has been known to overcome the password issue.
You can click the white star next to this message if you think it was helpful.

I bought an iphone 5 put a passcode i forgot it done a restore with i tunes and it is still asking for user id and password during activate how do i get around that ??

i bought an iphone 5 put a passcode i forgot it done a restore with i tunes and it is still asking for user id and password during activate how do i get around that ??

You need to contact the previous owner and have them follow these instructions: http://support.apple.com/kb/HT5661

I have changed my icloud user Id and password, but the old user ID still pops up and ask my password. I cannot delete my old icloud account.

I have changed my icloud user Id and password, but the old user ID still pops up and ask for my password. I cannot delete my old icloud account as it keeps asking password of my old user ID. how can I rectify the problem?

Hey HKKL,
Thanks for the question. I understand you are having issue relating to the iCloud account after changing your Apple ID email address. The following article addresses this issue and potential resolution:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
https://support.apple.com/kb/TS5223
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Tap Settings > iCloud and try to sign out.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Tap Settings > iCloud and sign in with the new Apple ID.
Thanks,
Matt M.

AS/400 db2 database asks signon to AS/400 prompt for USER ID and PASSWORD when BO report is refreshed by client users

Post Author: LalitJoshi
CA Forum: Publishing
I have created a report which is using AS/400 db2 database.Connection is setup in a universe and through Client Access ODBC driver.
Users are trying to connect AS/400 db2 system through ODBC(Client Access ODBC driver) and full client BO 6.5.
It asks for signon to AS/400 prompt for USER ID and PASSWORD when BO report is refreshed by users.
Is there any way i can avoid the USER ID and PASSWORD as it is not feasible to give database USER ID and PASSWORD to each users.

> SAPClassNotFoundException:
> com.ddtek.jdbc.db2.DB2Driver
It looks like your JDBC driver is not found. Have you deployed the driver to XI?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10</a>

My moms computer died we are putting the old drive into the new computer as a slave drive. how do I transfer all the bookmarks, user names and passwords from the old drive to the new drive?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/889318]]</blockquote>
Hello,
Sorry if this posted twice I am NEW. I thought I could just go back to what I typed and add to it. Mom had a computer it died they are putting in the old drive on the new computer as a slave. What are the steps I need to do to transfer ALL the bookmarks, user names and passwords onto the new computer. We will have 3 desktops do we have to do the same steps on each desktop? I do not want to re enter all the user names and passwords on the new hard drive. Old computer was Windows XP the new computer is Windows 7 Kathryn Schwartz

Duplicate - https://support.mozilla.com/en-US/questions/889318

Hi, I bought a second hand iphone 4s and seller has blocked it and reset it know the iphone is asking for a email and password that the seller was using, I can't contact him know and i'm left with an Iphone that is useless, can you help ma please?

hi, I bought a second hand iphone 4s and seller has blocked it and reset it know the iphone is asking for a email and password that the seller was using, I can't contact him know and i'm left with an Iphone that is useless, can you help ma please?

Sorry, there is nothing you can do until the device is removed from the sellers Apple ID.
Without that, your device can't be used, check these articles:
iCloud: Find My iPhone Activation Lock in iOS 7
Find My iPhone Activation Lock: Removing a device from a previous owner’s account

When I try installing Firefox 6.0 from the binary file, a box with "Run As" in the type field appears, which asks me for user name and password. Please advise about the course of action that I should take.

Trying to run it as the current user, or as one from a different account(administrator in this case) also doesn't work.

I think the client is not able to do a HTTP POST
to the WLS server but it can do a HTTP GET.
I dont know why.
http://manojc.com
"Ganesh" <[email protected]> wrote in message
news:3eba91bc$[email protected]..
>
Hi,
I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
invoke the web service through my browser (IE 6.0) using the web servicesurl,
it brings my service method correctly. From there, if I click the invokebutton
it asks me for a network user name and password under "weblogic" realm???If I
provide the admin user credentials (which I supplied while creating mydomain)
it is not accepting that it keeps popping up this network user passwordwindow
over and over. Not sure which username/password I have to provide here tosee
the result of my service.
If I try to invoke the web service through my client (static) I am gettinga connection
refused exception. I guess either way, I am not able to access my webservice.
In the attached file, I have cut and pasted the client stack trace as wellas
the server log trace from weblogic.
Any ideas would be highly appreciated.
Thanks,
Ganesh

How do you bypass the proxy for local addresses? It keeps prompting me for user id and password to access an intranet page

When trying to launch an intranet web site, it won't connect. It prompts me for a user id and password. I can get to external sites, and I have already added the site into the "No proxy for" dialog box

It depends where you publish your pages.
At MobileMe you can password protect a Site in iWeb. A Site is a collection of pages. If you want to protect a single page for a single person, you have to create a Site with one page and protect it.
When publishing at a 3rd party webhost, you can password protect a page or directory in a administration panel. Check with your host. iWeb is not involved there.

How can I hide the user name and password from the url address?

Good afternoon every body,
I have a form running with Oracle9i Developer Suite Release 2 and when I run the form on the web it shows the user name and password of my data base. Can anyone of you please help me to hide the user name and password, if there's any way of course?.
Thanks a lot!!.

Luis,
Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
inolau,
True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

Autosave for user ID and password in the web

Similar Messages

Maybe you are looking for