Avaliability check and ATP check for material in CO02 tcode
Hello All,
I have a requirement where i am building a portal for WM pick list . The requirment is like i enter a production order number on the screen and gives me the material and it's corresponding components. Now the user has the option to select these components (more than one at a time ) . Now, i have provided few buttons like ATP Check, Pick component etc.
I need to check the availabilty for the selected order components from the list. If the ATP check is successful and all the parts are available, then user can continue with the WM pick process and the Pick Component button becomes active.
Does anyone has any idea on how to find the availability for the individual component and if yes please provide the steps to do it.
Thanks & Regards,
Ravi Aswani
Hi ,
You can check the availability of material (component ) via the following function modules
MD_STOCK_REQUIREMENTS_LIST_API and BAPI_MATERIAL_STOCK_REQ_LIST
Please check the above two function module for your requirement .
you can use this function module in your customized progam to check the material stock.
Hope this information helpful.
Best regards,
Chithaanantham
Similar Messages
-
Performing check and potential update for status control table
Cheers Experts,
I searched in the forum, but I didn't find an answer.
I'm working on a 3.0B BW system.
After updating from PSA to an ODS, in the log I see the following line:
"Performing check and potential update for status control table" and double clicking on it, it says:
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
I have 2 questions:
1) What is BW doing, mainly because I'm working on an ODS and not an Infocube?
2) What can I do to reduce its execution time, since it lasts several minutes?
Thanks and greetings.
RobertoRoberto, did you ever find an answer to your question? We also are experiencing long runtimes during this particular process running 3.x deltas from ODS to ODS and cubes.
-
Table to link in b/w plant and purchase org for material?
Hi Gurus,
what is the table to link in b/w plant and purchase org for material?
I want to know the materials available for particular plant and purchase org combination..
thanks in advance..hi
plz check that the materials are created on basis of PLANTS
so u can get list of materials plant wise in MM60
now this plants may be assigned to different P Org ,so u have to find that PO to plant linkage
if u need all this on one report then try to create a new z programme or use query writting
regards
kunal -
Item Category and MRP type for material is not allowed
Hello all,
I got a Error Message:
<b>Transaction Z113 is not defined (Message no. V1347)</b>
<b>Diagnosis</b>
This combination of item category Z113 and MRP type for material is not allowed.
<b>System response</b>
The system does not allow further processing of this item.
<b>Procedure</b>
Check your entry.
You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
<b>The SD Configuration seems all right, I have:</b>
Sls Doc Type (<b>VOV8</b>) ZA9 (no delivery type assigned)
Item Category (<b>VOV7</b>) Z113
Assigs Sls Doc & Item Ctgry (<b>VOV4</b>) ZA9/ZNOR/blank/blanl/Z113
ZNOR = Std Item-Av. chck Del
ZNOR defined in MM03/Sls Org 2
Define Schedule Line (<b>VOV6</b>) = Z7 (without delivery)
Z7 has FLAG on Prod Allocation
Assign Schedule Line (<b>VOV5</b>) = Z113/ND/Z7
At table: TVEPZ
I have the entry: Z113/ND/Z7
Guys, what would?
Please help me out because I am stuck in this issue.
Thanks a lot,
BarbaraBarbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
New Rqmts class gets tied to a Rqmts Type
New Rqmts Type gets assigned to rqmts class
Strategy, assign the Rqmts Type to it
Strategy Group, Assign the Strategy to it
MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
It may be something in this area that you need to trace through ?
Bill -
I am suddenly having a problem printing 4x6 photos. The print as though starting in the middle of an 8x10 sheet. I've checked and double-checked the print settings. Anyone else have this problem?
jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
KDL60W630b - software update check and region check - failing everytime and tv going into initial setup mode I got this today today and when i tried to complete initial set-up. it never completed. TV is going in cycles with initial set-up everytime it connects to my internet and says connected successfully. after it tries to update software and tv restartssame initial set-up screen again i tried keypad button on remote and it took me to tv. i was able to see tv that way but whenever i start tv, it goes back into initial set-up again. any solution for this?
Hi GC_Sugarland,
Thank you for considering Sony Community!
I'm sorry to hear that this happens to your TV after the update. Pleas reset your the TV to the original setting. click on this link to guide you on how to reset it.
I hope this helps. Please keep me posted.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution" -
Object Class and Object Id for material Determination tables.
I want to know what is the Object Class and Object Id for material Determination records to verify tables CDHDR and CDPOS.
The purpose is to know the changes done by the different users for material determination records.
Can any one help.Hi ZZZSUNNY,
Similar question is answered recently.Please find the below link which will helps you
Material determination: how to see the creater of a record?
Thanks
Dasaradha -
Implement workflow process for material reservation using tcode IW32
Hi
How can I implement workflow process for material reservation using tcode IW32
- PM order.
Thanks,
AmosHi;
Have been able to find the solution to create the IDoc MRESCR after entering a reservation?
I am in the same situation and I do not see the IDoc output in the BD87.
It would be nice if you share the solution.
Thanks in advance -
Relationship about ATP check and credit check
Dear all,
At present, we have credit control in sales order. The rule is : once the sales order's amount over 1 dollar, the order will be blocked for credit check. This order has to release credit block manually in VKM4.
Here has a problem, when a sales order has credit released with the status "D", if i check ATP for one item in this order, the credit status will return to "B", it is not match our requirement.
How can the credit status not change when ATP check happen in the sales order?
Thanks in advance!Hi Irene,
You can copy this requirement with new code like :
IF yvbuk-cmgst = 'D'.
MOVE CHARX TO BYPASS-SECURITY.
MOVE CHARX TO BYPASS-STATIC_LIMIT.
MOVE CHARX TO BYPASS-DYNAMIC_LIMIT.
MOVE CHARX TO BYPASS-DOCUMENTVALUE.
MOVE CHARX TO BYPASS-CRITICAL_FIELDS.
MOVE CHARX TO BYPASS-REVIEWDATE.
MOVE CHARX TO BYPASS-OPEN_ITEMS.
MOVE CHARX TO BYPASS-OLDEST_OP.
MOVE CHARX TO BYPASS-DUNNING_LEVEL.
MOVE CHARX TO BYPASS-USER1.
MOVE CHARX TO BYPASS-USER2.
MOVE CHARX TO BYPASS-USER3.
MOVE CHARX TO status_reset-STATIC_LIMIT.
MOVE CHARX TO status_reset-DYNAMIC_LIMIT.
MOVE CHARX TO status_reset-DOCUMENTVALUE.
MOVE CHARX TO status_reset-CRITICAL_FIELDS.
MOVE CHARX TO status_reset-REVIEWDATE.
MOVE CHARX TO status_reset-OPEN_ITEMS.
MOVE CHARX TO status_reset-OLDEST_OP.
MOVE CHARX TO status_reset-DUNNING_LEVEL.
MOVE CHARX TO status_reset-USER1.
MOVE CHARX TO status_reset-USER2.
MOVE CHARX TO status_reset-USER3.
EXIT.
ENDIF.
If you are a problem with yvbuk-cmgst, you can use user exit MV45AFZZ to save the credit status (cmgst) into an other field.
This new field is checked in the new requirement.
This requirement deactivates the credit check if the credit status is released. In this case, no credit check is possible in SO.
Regards,
Lionel -
Item category (Customized )ZJT1 and MRP type for material is not allowed
Hi Guys,
When i try to create the order i see the error as item category and MRP type of the material is not allowed.
I checked in Vov5 table, i could observe that Schedule line category is maintained.
Could you please help us in resolving this..
Thanks and regards,
RahulHi,
Please assign the Item Category ZJTI and MRP type (for eg: PD) assigned to the schedule line category in IMG under Sales and Distribution--> Sales ---> Schedule line -->Assign schedule line
Hope this resolve your issue
Regards,
KrishnaO -
Availability check and Credit check
Hi
I have set up credit management. I have a query in my case for a MTS scenario the credit check is before I do the availability check
but in the case of a MTO scenario credit check is after availability check.
Am I missing any setups???? I am not able to understand this behaviour, should it not be considering the value as soon as the order is created and not wait for the availability check.
Thank you for your time
Regards
Madan ShettySorry about the late reponse I was away for a few days.
Thanks Srinu and Eduardo was taking timeout and responding.
Totally agree Srinu and that was exactly my point as well and hence the post on SDN
Srinu my issue with a MTO material is when I enter the order and save it there is no reponse from the system as currently stock is not avaiable, for some reason it doesnt do a credit check .
But for the same customer with a MTS material as soon as enter the customer num and the material
it gives a pop up stating
STATIC credit check: credit limit exceeded(data cannot be saved).
PLease do let me know if you require further details in the meanwhile I am gonna try and verify as well from my end.
My FD32 setup incase I have made any errors please do specify
Regards
Madan -
Create Vendor Inforecords and source list for material
Hi All,
senario:I have to create vendor Inforecords and source list for new material as copy of reference material.
There are various FM's available to read inforecord, source list but as reuirement is to copy these things from reference materil and create same for new material.
Can you people suggest any way to achive these functionalies through any FM, BADI or any other way...
Looking forword for your reply..
Regards,
RahulHi All,
Can we use FM MGW_COPY_INFORECORDS to create inforecords for new material.
Just to cross check, as i m not sure about use of this FM.
Regards,
Rahul -
Last purchase order and goods receipt for material
Hello to everyone,
is there any standard report where I can see the last purchase order and goods receipt for a material?
RegardsHi,
Latest PO you can get from ME2M, by giving input as material and scope of list as best.
Latest GR date can be get from MB51, by giving input as Material and movement type as 101.
Regards,
Prabu -
'Checking' and 'Un-checking' multiple selected items
Would like to check my entire 'Holiday' playlist without doing it one at a time.
I forgot how and this new version of iTunes may not have this capability(?)
Please help.Select the playlist by clicking on it. Now go to "edit/select all" and that will highlight the songs in blue.
Now right click on them and select "check selection". -
5.2 -- GOTO SE16 and enter TSTC for TABLE NAME. TCODE FIELD /VIRSA*
Should the following tcodes work? If so, how do I troubleshoot the ones that don't work? If not, how do they get configured to work? Can someone provide a link for documentation?
TCODE TTEXT
/VIRSA/ALERTGEN Activity Monitoring
/VIRSA/MICCONFIG Virsa MIC User mapping Configuration
/VIRSA/ORGUSRMAPPING Maintain ORGUSERS table
/VIRSA/RE_DNLDROLES Role Expert 4.0
/VIRSA/VFAT Firefighter
/VIRSA/VRMT Role Expert
/VIRSA/ZMGMTRPT Management Report Graphical View
/VIRSA/ZRTCNFG Risk Terminator Configuration
/VIRSA/ZRTDELLOCK Delete Role Lock
/VIRSA/ZRTRGLOG Risk Terminator Role Generation Log
/VIRSA/ZVFAT_U02 FirefightId Log summary
/VIRSA/ZVFAT_U03 Reason/Activity report
/VIRSA/ZVFAT_U04 FirefightId Transaction Usage
/VIRSA/ZVFAT_U05 Invalid Firefighter Ids/Owners/Cntrl
/VIRSA/ZVFAT_U06 SOD Conflicts in Firefighter
/VIRSA/ZVFAT_U07 Data Migration from Master to Text
/VIRSA/ZVFAT_V01 Log Report
/VIRSA/ZVFAT_V02 Log Report
/VIRSA/ZVRAT SAP Compliance Calibrator
/VIRSA/ZVRATBAK1 Update data for Mgmt Graphical View
/VIRSA/ZVRAT_C01 Security & Controls Policies
/VIRSA/ZVRAT_COVN Conversion of CC tables, Old to New
/VIRSA/ZVRAT_D01 Download Spool Requests by Job Name
/VIRSA/ZVRAT_L01 Conversion Utility for CC Text Table
/VIRSA/ZVRAT_L02 Conversion Utility for Long Texts
/VIRSA/ZVRAT_M01 Upload/Download CC tables
/VIRSA/ZVRAT_M02 Where Used list of Mit. Control Id/M
/VIRSA/ZVRAT_M03 Analyze disabled SOD TCode & Object
/VIRSA/ZVRAT_M04 Optimizer for SOD Data Table
/VIRSA/ZVRAT_M05 Where Used list of Control Id/Monit
/VIRSA/ZVRAT_MG1 Management Cockpit
/VIRSA/ZVRAT_P01 Display changes to Profiles
/VIRSA/ZVRAT_R01 Count authorizations in roles
/VIRSA/ZVRAT_RB2 Rule Architect
/VIRSA/ZVRAT_RB3 Rule Architect Conversion
/VIRSA/ZVRAT_S01 Monitor Conflicts & Critical Trans.
/VIRSA/ZVRAT_S021 Monitor Conflicts & Critical Trans.
/VIRSA/ZVRAT_S03 Download Objects for Tcodes
/VIRSA/ZVRAT_S04 SOD Conflicts for TCodes and Objects
/VIRSA/ZVRAT_S05 SOD Rule Wizard
/VIRSA/ZVRAT_S06 SOD Rule Validation Tool
/VIRSA/ZVRAT_S07 Non Reference Report
/VIRSA/ZVRAT_S08 User Access Report
/VIRSA/ZVRAT_S09 Comparing diffrent SOD Matrices
/VIRSA/ZVRAT_S10 Tcodes by Roles/Profiles, never exec
/VIRSA/ZVRAT_S11 Authorization object by Roles/Profs
/VIRSA/ZVRAT_S12 Transactions executed by Users
/VIRSA/ZVRAT_S13 Comparing Critical Tcode Matrices
/VIRSA/ZVRAT_S14 Comparing SOD Authorization Matrices
/VIRSA/ZVRAT_S15 Compare Sod Tcode & Authorization
/VIRSA/ZVRAT_S16 Comp.Calibrator Data Maintenance
/VIRSA/ZVRAT_U01 Count authorizations for Users
/VIRSA/ZVRAT_U02 Analysis of called trans in Cus.code
/VIRSA/ZVRAT_U03 Management Report
/VIRSA/ZVRAT_U05 Expired and Expiring Roles for Users
/VIRSA/ZVRMT_U01 Check Role Status
/VIRSA/ZVRMT_U02 Check Tcodes in Menu & Authorization
/VIRSA/ZVRMT_U03 Compare Users Roles
/VIRSA/ZVRMT_U04 List roles assigned to a user
/VIRSA/ZVRMT_U05 Where used list for roles
/VIRSA/ZVRMT_U06 List roles and transactions
/VIRSA/ZVRMT_U07 Create/Modify Derived Roles
/VIRSA/ZVRMT_U08 Analysis of Owners Roles and UsersHi Greg,
Most of the TCodes work but they are not being used. Which products do you currently have? Most of these tcodes are obsolete as they were part of old Virsa products. Here is the explanation:
-> At the start, Virsa had five different products namely Compliance Calibrator (CC), Fire Fighter (FF), Role Expert (RE), Risk Terminator (RT) and Access Enforcer (AE). Except AE, all other products were developed into SAP R/3 using ABAP so the transaction you see are coming from those four products. As of now, CC and RE has been moved to Java (same as AE) but RT and FF still reside in ABAP side.
-> You should be able to configure Tcodes related to FF and RT. You do not need to configure Tcodes for CC and RE.
-> You must be wondering how did you get all these Tcodes? Through the RTA (Real Time Agent) you have installed for GRC AC 5.2 in your SAP backend system. Even though, AC 5.2 does not need full blown products in the back-end, RTA still contains all of those products.
-> To start using these products, you will have activate BC sets. I do not recommend you to use CC and RE, if you are already using those products via Web front-end. FF and RT has some pretty good features.
-> Please follow AC 5.2 configuration guide to configure FF and RT.
If you don't want to use any of these, don't bother. These tcodes don't affect anything in your system.
Regards,
Alpesh
Maybe you are looking for
-
Photoshop CC will not allow me to save files
Photoshop CC will not allow me to save any files. It will bring up the "save as" window, but then it immediately disappears when trying to select a save location. No error messages, it just disappears. Any ideas? Running it on a Mac OS X Maverick
-
I know, second post, but I got a hold of some old panther cd's from school. So I put disk one in.... and hello? Questionmark. I've tried booting it using open firmware too... also using the command "boot cd:,\\:tbxi". I don't know if this will help,
-
Again this morning I open iphoto to work on deleting about 80% of the 500 shots I took last night and 3 from the end iphoto just quits. When I restart all the 400 odd photo's that I have deleted are back. This is happening all of the time and frankly
-
Sqlplus can connect but can not work!
I have finished an installing of an Oracle10R2 on the OEL5.0 system. All run well except that the sqlplus can not work.I install it once more, but the results are same. What is the problem? [oracle@localhost database]$ sqlplus SQL*Plus: Release 10.2.
-
older G4 trouble loading page. Trying to open bank account and when it takes the passwords and goes to page only white page comes up. Not banking prob. not prob with other inernet locals, just this one page.?