Awaitingt approval in when posting confirmation

Hi,
I have created a service shopping cart and i posted confirmation for that SC.
The system shows the status as awaiting approval for the confirmation but i am not able to see who the approver for the SC wil be.
I have checked the managers approval workbox but i dont see anythign there either..
Is there any functiona module that wil tel me who the confirmation is pending with ??
Please help

Hello Vignesh,
Have a look through note 322526, there it describes all the transactions you can use in order to figure out why no workflow was triggered. Let me know if you have any further questions.
Kind regards,
Siobhan

Similar Messages

  • Leading zero for Product ID deleted when posting confirmation

    Dear All,
    I'm facing a problem when posting confirmation document from SRM to backend for PO item WITHOUT account assignment. When I want to post confirmation document, there is an error message 'Material document data and PO data do not match (Material )'. When I check the Idoc for confirmation, the leading zero in product ID was deleted in Idoc. For Example:
    The product ID is 000000001600000000 (18 character, as defined in Tcode COMCPRFORMAT) when confirmation document created, but the document can't be posted, I can only save the document. And when I check the Idoc, the product ID became 1600000000.
    I've already create a PO and confirmation for the same product using account assignment (Cost Center). And confirmation posted succesfully in backend. FYI, I've already implement note 1568941 in my SRM system.
    Does anyone here ever have the same problem?
    Rgds,
    Aleluya.

    problem solved after implement note 1592750
    Rgds,
    Aleluya sap.

  • Error while posting confirmation for limit PO

    Hi Experts,
    we are having a standalone scenario(SRM 7) and the issue is as mentioned below
    The situation is that the PO is a limit order with 2 line items. The first line item is complete and has been closed off with the u201Cno further confirmation/invoiceu201D indicators selected. However the 2nd line still has some limit remaining but the when the central confirmations attempts to enter a good receipt against the line they get an error message which is "No Confirmation could be entered for purchase order"
    please guide me how to solve this.
    regards
    smita

    Hi,
    please find furhte information.
    a limit sc is created for a value of 37000 GBP and after approval it created a PO. but the user went and added a line item directly in PO for 40000 GBP. Now the total value of SC is 77000 GBP.
    user has created a confirmation for 36000GBP and selected no confirmation required further.there is no issues with this lin item
    but with the second line item he posted confimation for value 37000 gbp and invoiced for 30000 GBP.
    when i am trying to post confirmation for 3000 GBP system is throwing an error that "no confirmation could be entered for purchase order"
    could any one guide me how to solve this or any suggestions for solving this.
    regards
    smita

  • Change Moving Average Price when Post Goods issue posted from VL02N

    Hi all,
    Please help me to find USER EXIT / BADI or Enhancement to change Price - MSEG-DMBTR
    when Post Goods Issue posted from transaction VL02N.
    Thanks in advance,
    Mila.

    Hi,
    Check these Enhancemnts...
    Exit Name           Description
    V02V0001            Sales area determination for stock transport order
    V02V0002            User exit for storage location determination
    V02V0003            User exit for gate + matl staging area determination (headr)
    V02V0004            User Exit for Staging Area Determination (Item)
    V50PSTAT            Delivery: Item Status Calculation
    V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
    V50R0001            Collective processing for delivery creation
    V50R0002            Collective processing for delivery creation
    V50R0004            Calculation of Stock for POs for Shipping Due Date List
    V50S0001            User Exits for Delivery Processing
    V53C0001            Rough workload calculation in time per item
    V53C0002            W&S: RWE enhancement - shipping material type/time slot
    V53W0001            User exits for creating picking waves
    VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
    Badi Name            Description
    DELIVERY_ADDR_SAP    Determine Time-Dependent Delivery Address in Delivery
    DELIVERY_PUBLISH     Returns BAdI Implementation: Automatic GR Posting T 2
    DELIVERY_PUBLISH     Updating of Delivery in Purchase Order
    DELIVERY_PUBLISH     AIP: Delivery Confirmation for Sales Order
    Regards
    Raghu

  • BORGR. Error when posting Inbound Delivery

    Within transaction BORGR, when posting an inbound delivery, the material document is in state "Archived" instead of completed.
    This is observed in the document flow of inbound delivery.
    Status WBSTK and WBSTA of tables VBUK and VBUP are recorded with " C" even though that the material document does not exist in the system.
    This error does not allow to continue with the transport order creation of the received material.
    I would like to know the possible reason for this problem and the solution.
    Thanks.

    In the config of  Define Internal Confirmation Categories 
    is
    2 shipping notification is assign to 10 or LA if it LA than it will allow you to create the inbound delivery
    The delivery is created in my system
    i got message
    Notified quantity exceeds quantity still to be notified 15.000- CS   Message no. ME160                                               
    but it is warning not error.

  • ASKB works when Posting in GL indicator is 4 ?

    Hi,
    Can you please clarify the below.....
    In OADB, two of dep.areas (10 & 20) mentioned as "Real" and Posting in GL indicator is 4(Area posts APC directly and Depreciation).
    Scenario: I posted a APC transaction but as a GL is blocked for the other dep.areas (10 &20) , the APC value posted for 01 area but not posted to other dep.areas.
    I corrected the GL and ran ASKB then APC value posted to other two dep.areas.
    Question: Even though Posting in GL indicator is 4(Area posts APC directly and Depreciation), ASKB works here. I do hope, ASKB works....Can you please confirm that as it's Std. SAP behaviour?
    Thanks in advance!
    Murali

    Thanks Alex.
    Will ASKB work when Posting in GL indicator is 6 (Area posts only APC directly) also?
    Any limitations are there?
    Thanks in advance !
    Murali

  • AFRU table when a confirmations at the order level is entered?

    Hello,
    I know that the users can enter a confirmation in the operation level (with the co11n transaction) or in the order level (with the co15 transaction).
    What I want to know is if physically, in the AFRU table, when a user confirm directly an order (co15), do we find lines of confirmation for all the operations with quantities for all the operations (proportional) or just one line with the operation empy (at 0 for exemple) and all the quantity in this line?
    Thanks a lot,
    Regards,
    Julien

    Hi,
    When you confirm order using CO15 at order level, there will be only one entry in AFRU table for all operations and Operation field in the AFRU table would be blank.Only Order number woule be present.
    Regards,
    Krishna Mohan

  • Validation when posting a document using T. Code FB50 or F-02

    Dear Experts
    Please let me know on how to validate when posting a Cross Company Transaction using T. Codes FB50 or F-02.  The requirement is to restrict Branches (each Branch is a Company Code in SAP) to post any Cross Company documents by selecting HO Company Code in Line Item, system has to stop the User by giving Error Message.
    We can't control this using User level Authorizations because, here the Authorization is provided to the Users to post the Transactions using T. Codes FB50 and F-02.
    To restrict this, I created a Validation as below:
    Prerequisite:
    BKPF-TCODE = 'FB50' OR BKPF-TCODE = 'F-02' AND
    BKPF-BUKRS = 'Br. Company Code' AND
    BSEG-BUKRS = 'HO Company Code'
    Check:
    FALSE
    Message:
    You Can't post Cross Company Transactions using T.Code FB50 or F-02
    And I activated the above Validation in OB28 for HO and Branch Company Codes.  But the Validation is not working properly.  Can anybody help me on how to proceed further in this regard please.

    Hi,
    I haven't tried to use a transaction code for Validation purpose. Instead, I have used document type as prerequisite and then check:
    BKPF-BUKRS = 'Br. Company Code' AND
    BSEG-BUKRS = 'HO Company Code'
    If the condition is met, it displays an error (per the message in validation) while completing the line item details on posting a document.
    Please let me know if that helps. If not, I can try to replicate your scenario and let you know if there is anything missing.
    Thanks,
    Ashish

  • Dump error when posting through F-02.

    Greetings everyone,
    When posting G/L act through F-02 we are facing a dump error in QUALITY system and in DEVELOPMENT we are able to post succesfully.
    From my primary analysis one standard program is calling and that program has syntax error.
    When i checked that program it is saved in local object and generated automaticaly when some thing done is FICO.
    Generated Program is Module pool program :GBTV6FI0
    Description of that program is below
    Generated by report RGUGBR01.
    Generated code used by validations substitutions and rules.
    !! Do not manually change or transport !!
    For reference please find the dump below
        Error in the ABAP Application Program
        The current ABAP program "SAPLGBL5" had to be terminated because
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "GBTV6FI0 " in in
         " in
        line 519:
        "FORM "SEND_CMPLX_DATA_015" does not exist"
        The include has been created and last changed by:
        Created by: "DDIC "
        Last changed by: "****"
        Error in the ABAP Application Program
        The current ABAP program "SAPLGBL5" had to be terminated because
        come across a statement that unfortunately cannot be executed.
    Can any one please suggest me how to resolve this issue.
    Thanks in Advance.

    This looks like you have not transported the code to quality system. This code seems to have been generated when validation, substitution and rules have been defined and is missing in quality system (not transported ?)
    Find the form send_cmplx_data_015 in development system and check the version. This is the transport that still needs to be transported to quality system.
    I now see that you say it has been saved as local object. In that case assign it to a package and transport in SE80.
    And now I see the answer of Klaus, follow the instructions in the note he has supplied first. It seems that note is exactly describing your problem.  :-)

  • Error when posting a SOAP request

    Hi all,
    Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
    The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
    can any one of you tell me in place of XISOAPAdapter what should i place?
    Please help me to post the SOAP request to PI server.
    Thanks in advance ,
    Manohar.

    Hi ,
    copy the same URL  (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
    See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
    You should get response something like this '
    Message Servlet is in Status OK
    Status information:
    Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
    Classname ModuleProcessor: null
    Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
    Lookupname for remoteModuleProcessorLookupName: null
    ModuleProcessorClass not instantiated
    ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
    ModuleProcessorRemote not instantiated
    This  is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
    Ranjeet Singh.

  • Error message when posting invoice : Day-end closing not defined

    Hi,
    In our training environment we migrated from FAGLFLEXT to FMGLFLEXT and activated fund management.
    Now when posting an invoice the system provides an error message: "FQ252 Day end closing not defined".
    There is no configuration related to F845 but we are prevented from posting the document due to this error message.
    Any idea of where this could come from and of what need to be done to prevent this from happening?
    Rgds
    Sophie

    Hi Sophie,
    Can you check if you have entries in either PSO43 or PSO43USER tables (can be accessed via F8O2 transaction)?
    Regards,
    Eli

  • When posting GI for Non valuated material in Delivery geting error (M8147)

    Hi Experts
    We have a problem that we are trying to send a material from one plant in one company code to another plant in another company code (Inter Company Stock Transfer Order). The material is of type Non Valuated (So it has no valuation class). The PO Order type used and the PO account assignment category is of type saying GR Non Valuated.
    Problem is in the outbound delivery (movement type 645 determined) when posting GI do we get a account determination error (M8147 = Account determination for entry 1000 GBB Z001 not possible), saying that no account could be determined.
    Our understanding is that the GI for the delivery demands a Valuation, which we can not do as the material is NON Valuated.
    How to set the GI non valuated for the outbound delivery, so we can avoid this error? please help
    BR

    >
    Krishna Rao wrote:
    > We assigned the GL for GBB in OBY. But, still the error is coming. Is there any other setup we need to do for Non Valuated material to post goods issue from delivery?
    I cant believe that the same error message is coming up after the maintenance.
    you either maintained an entry at a wrong level within GBB or the message must have changed.
    Make sure that you take any information of this message into account (even the spaces)
    the message is certainly not like you posted here: Account determination for entry 1000 GBB Z001 not possible
    the message carries 4 variables , not only 3

  • Error when posting goods issue

    hi gurus,
    can anyone please help me with this error when posting goods issue to a free issue sales order " line item text is mandatory for vendor invoices".
    thanks in advance

    Dear Ysabella
    It seems the item texts is not maintained in the order which is made as mandatory.
    Go to sale order VA02, select that line item and click on "GotoItemTexts".  There maintain the relevant text and retry.
    thanks
    G. Lakshmipathi

  • Exit or substitution GL account when posting goods issue

    Hi out there,
    does anyone know how to change BSEG-HKONT via a subsitution ? It seems to be blocked for that purpose. Although if I unblock it in table GB01 this does not work.
    If there is no possibility does anyone know a customer exit to change the account determination for GBB VBR when posting a goods issue ? It is needed for special postings and I want to program it either in a substituiton or exit.
    Thanks a lot for your help.
    Sebastian

    Dear Sebastian,
    It is possiable to change G/L through subsitution. But you will have to take help from abaper who will write code for the subsitution.
    Any subsitution which is realted to G/L can be written though the following path
    Financial Accounting (New)->>Financial Accounting Global Settings (New)->>Tools->>Validation/Substitution->>Substitution in Accounting Documents
    after that enter new line and double clik to write ABAP code based on your requirement.
    Hope you got the way.
    Rupesh

  • Error message KI248 on delivery document when posting goods issue

    Hi,
    On the delivery document, when posting goods issue I get the following message:
    "Account 60700000 requires an assignment to a CO object
    Message no. KI248
    Diagnosis
    All given account assignment objects (order, project) are defined as statistical.
    System Response
    Statistical orders or projects are ignored when FI and CO are reconciled. You must enter a cost center, order, project, or cost object to which the costs are posted for CO postings.
    Procedure
    Enter a cost center, an order, a project, or a cost object that is not statistical. The posting row affected is 000 and the account is 60700000."
    On the sales order I have a statistical order.
    CO-PA is active, cost element 607 is included in PA transfer structure.
    I also tried with cost center allocation in OKB9.
    60700000 is defined  as a cost element (category 1).
    Any suggestion could be helpfull.
    Thanks,
    Lavinia

    Hi,
    Thank for your answer.
    I tested with element cost category 12, it's working, but not the way I need: I don't have any value on the cost center.
    When I don't have statistical order in sales order, the sistem it's working exactly how I need: the costs are posted on cost center and the VPRS condition is transfered to CO-PA on profitability segment.
    Anyway, I finaly make it work with a cost center substitution.
    Lavinia

Maybe you are looking for