AWE 64 missing part (cap) help

Hi. Recently I got an AWE 64 ( Model CT4500) so I would appreciate if someone could help me:
there's a missing part on the card I got, its a cap, it is supposed to go where
indicated: Next to it says c35, at the bottom of the card, its located next to the copyright.
Could you please tell me what is written over the cap surface? how many farads and what voltage, and perhaps even the cap made. I would post a picture but... it seems like I cant
well, if someone could help me and wants the picture my mail is [email protected]
Thanks.

He has got an PCI system, so it should be PNP compatible. Migth be Interupt sharing. Try to stick that card into another slot. First only Graphic card. Reinstall Win98SE. Then install !ALL! updates for win98. install the AWE card. Download VXD drivers (NOT WDM!!!) and install them. VXD drivers can be found under windows updates /?Windows ME / driver section. Yeah, i hope this is right : WinME!! (had an AWE32, but its a?few years after i had downloaded these drivers.
Put in your Voodoo card. maybe this card is dead, but it might work if you try it in every slot? (dont move your graphic- card). Good luck. If finished, do the same with your modem, what you did on your Voodoo card. Maybe some parts wont work anymore, because these things are really old and some components on them (capacitors) may have running dead meanwhile.Modem issues: i know that com/3 or com2/4 isnt working on Pentium PC's so try beetween them.
Message Edited by fffcmad on 02-23-200709:5 PM

Similar Messages

OSSNOTES for releasing process orders with missing parts in background

Hi All,
The bapi 'BAPI_PROCORD_RELEASE' is not releasing the process orders
with missing parts in background.
Is there any OSSNotes for releasing these process orders in backgound through this bapi.
Pls help.
Thanks .

Hi Suri - Thanks for your response. I tried both with blank(individual and collective) and 2 (collective req. only) but I still get the same result. I found one other setting that can solve this issue and that is checking the activate full confirmation logic at the the MRP group level in OPPR. I will test more and let you know if that works but we dont use MRP groups here at our client and that is why I was little hesistant to set up collective availability check parameters at the MRP group level. But looks like this is the only option that we can use to get this resolved.
Thanks,
Bharath

Standard Report for missing parts at production order operation level?

Hi PP Gurus,
            We have standard report for missing parts at production orders level.
For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
Please help.
Thanks,
Reddy.

Hi Arvind,
      Thanks for for your response.
1. List: Components, Layout: Standard layout          set the Missing part
       It shows the component requirement/withdrawn quantity for each operation of production order. It is not showing the commit quantity.
2. List: Components, Layout: Pick list          set the Missing part
       It shows the component requirement/withdrawn quantity for each production order.
3. List: Components, Layout: Missing Parts List-Material View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
4. List: Components, Layout: Missing Parts List-Order View          set the Missing part
       It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
      We are unable to get the solution from all these 1 to 4 reports from COOIS.
Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
If avilable, what is the procedure to be followed?
Thanks,
Reddy.

Missing parts for Process orders

Hi Experts,
We are trying to find out the Transaction to faciltate the Missing parts list for the process order even after the order has been completed having the Status TECO, CLSD. This is to understand whether proper enough materials are consumed for the order or not. Based on that Production incharge can ensure the component consumption is made as per the Process order requirement.
We are trying with CO24, this is showing the missing parts list if order does not contain TECO and CLSD status.
Also we are checking with COOISPI, COID, but could find the correct feature out of them.
Do we need to develop any customized report with the help ABAPers.If yes please guide us the method.
Please help us in acheiving the list of components which are not consumed as per the Process order requirement.
Also guide us to identify the list of materials which are excess consumed for the Process order.
Thanks in advance..

Hi Jiaul,
Thank you very much for your reply.
So we need to develop the program to flag the missing parts and its qty even after the Order has the status TECO or CLSD.
Can you please provide logic to develop the Program.
I am thinking to take the inputs from process order required qty Vs withdrwan qty. if the Qty difference is positve, which should come under missing parts. if the difference is still negative means excess qty consumed.
Waiting for suggestions
Thanks in advance

Missing Parts List While creating Prd. Order

Hi Friends,
My client is creating production Orders Manually thru CO01and While Creating & Saving The Production Order System Is Not Supporting In Giving Missing Parts list In spite Of Deficit of Un Restricted stock inStorage Location For BOM components used in that Order.
To my surprise when the defisit is for all the BOM components only one component is showing as missing part in missing parts list.
But While confirming the order The system is showing missing parts for all the components which are defisit for order confirmation.
I Tried To Get This From the Following Method
Checked For Define checking control In OPJK.
Selected plant, Order type & selected the business function 1 for create or 2 for release. And Maintained These Settings
a) Removed tick mark in No Availability check.
b) Type of component check Given as - ATP check.
c) Material release - 1. User decides on release if parts are missing.
d) PP Checking rule (Which Is same As with plant parameter OPPQ)
e) In Define scope of check (OPJJ) made a tick mark in check w/o RLT.
Then Assigned the availability checking group at Mrp View of Header material.
In spite Of All These Settings Still At The Time Of Order Release/Save A Warning Massage Or A Informative Massage Is Not Appearing
*Please Suggestu2026u2026u2026u2026*
hari

Hi,
Please check same checking rule use in Material master and with order type and plant?
Check the cheking group in material master MRP3 view for all material.
Go to Transection OPJJ - Maintain scope of check,
Select your Checking rule which you have assing to your order type and tick INLCUDE RESERVATION.
(1). CO24- Missing Parts Information System
Under this transaction you choose Selection from Reservations and then select Plant & Material then you can get Missing Parts List for your respective material without production / planned order also.
(2). COOIS : Production Order Information System
Under this transaction you need to Select in List option as Components and then go on Selection Tab.
For collective availability check use
COHV - Excute the roport w ith collective avaliabilty check.
COMAC.
Hope this help.
Regards,
R.Brahmankar

Missing part message in MIGO

Hello,
we have activated the missing part message in MIGO using transaction OMBC.
All is working fine and we receive an notification in business workplace.
The problem is that only one person receives the mail and we want that all MRP controllers get an notification.
In transaction OMBC under "Mail user" we can only maintain one "Recipient Name".
But what is the meaning of "Recipient for mail to MRP controller"? Can we here use position to maintain all controolers in the organization model of the PD (PD-ORG)?
Thanks
Arnfried

Hi There
Specification of the mail recipient- System sends the missing part message to the material planner(MRP Controller) responsible for the material,, in order for this to happen , a user ID must be assigned to the material planner,,
Specification of missing part expediter- if no user ID is assigned to the responsible material planner, the message is sent to the central missing part expediter responsible for the plant. This person is defined per plant,,
So this is what happening in your place,, maintain the user ID to the MRP controller,, then it will work fine,,
Maintain the below settings--
SPRO-IMG-Materials Management-Consumption-Based Planning-Master Data-Define MRP Controllers-Double click on MRP controllers-Maintain the field Recipient Name (User ID) then system will trigger the mail to MRP controllers...
Hope it helps
Thanks
Senthil

Missing Part list for Plant to Plant Purchase order

Hi,
      I need the following requirement in CO24,
      In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
1.It should not consider the Planned order for a sales order.
2.It should not consider the planned order which can be convert into purchase requisition.
3.The procurement type should be "E" or "X".
Kindly guide me is there any standard layout changes in available or any development we have to do.
Thanks
Muthamil Murugan.G

Hi Purushothaman,
If you have the following settings in OPJK:
Plant                 XXXX
Order Type       XXXX
Availability Check    2
[X]Status Check
[X]Check material availability when saving order (may not need)
Checking Rule        PP PP checking rule
Component Check Type    ATP check
Release material     2 Release permitted despite missing parts
Then in COHV you try to mass release the order with the following parameter:
List: Order Header
Selection: Your selection criteria
Mass processing:
Function: Release
Max. No.of Processes 99
Save Log: Always
Release control order: Collective Order Release
Then after the order is released, you can find the missing part list of that order in CO03 menu path:
Goto->Missing Parts->Missing parts list
Hope it helps.
Regards,
Rachel

Missing Parts in Process Order

Hi Gurus,
I was created process order, in that some materials are shortage, System showing what are the missing parts.
it is also not allowing to release.
But, it is allowing to save without release.
My problem is System should not allow to save, if there is missing parts.
How to restrict this.
Can anybody help me in this.

Hi Anand,
Check the customization of "scope of check" in the availability check section. Availability check may take into consideration not only unrestricted stock.
Transaction OPJJ.
Pay attention to the resolution of this definition - checking group from material master and checking rule from your activity.
Thanks and reagards
E.Rambabu

Missing part in process order

Dear ALL ,
I ahve one issue ....in process order , when I check material availaility , its showing missing part list even though there is sufficinet stock , at MMBE its showing resarvation . For this I have checked folloing possibilities
1) I did Techo to all Process order which are open .
2) material master record for any block .
but still my prolem is not solved .
Please help me .
Regards
P Verma.

Dear
Couple checks for you
1.Where this stocks are appearing in MMBE ? Block stock ?? Sales Order Stock ? Stock in Transit etc ..please review once again
2.Check wether any Sales Order /STO or any special stock already reserved this items
3.Check you availability check control key assinged in MRP view in details OMJJ.
4.If all those stpes are correctly in place , please look into SAP Note 699407 : ATP shows missing parts eventhough stock is available.
Hope this will address the issue
Regards
JH

"missing part list" releasing process order, but the material there is

Hi dears,
Ive a strange problem.
When im going to release a process order, the system give me a missing part list.
The strange is the material indicated in that list, a component of a phantom, is present in state free in the st. location indicate.
Does anybody know what can be the problem?
Thanks in advance,
Juan

Hi all,
the problem was that the material was present in quantity lower than safety stock.
For this reason, the system give me that advice.
however thanks for the help.
Best regards,
Juan

Overview Missing Parts

Hi All,
In a production order there is an Overview for missing parts. It has information like committed quantity and committed date. We are looking for a standard SAP report that would give us this information by production order and material instead of having to look at each production order individually. Although we are not new to SAP, the PP and manfacturing part of SAP is new to us. Any help would be appreciated. We are familiar with transactions like COOIS, ect. But when getting into the detail of the Production orders the reports are more scarce.
Thanks,
Mark

Dear,
In COOIS report you can filter your report with system status "MSPT". It will give you all list of material with system status "MSPT". Also you can use report CO24 which is "missing part info system"
Hope it helps you.
Regards,
Alok Tiwari

Missing Parts check one level....can you confirm

Simple scenario. I have a 3 level BOM.
Top level Item Mat A (make to order 82) > Mat X (make to stock strategy 40) > Component 1 (purchased).
Stock: There is only stock for the Component 1
When I create an order for Mat A I get a missing part for Mat X. However, the committed date is giving me the Total replenishment lead time of my Mat X and not considering just the lead time to make Mat X even though we have Component 1 in stock. So my problem is that the ATP check is not considering that we have Component 1 in stock and should just give me a committed date for the in production time of Mat X.
Now I do understand that SAP PP may only look at the Zero stock for my Mat X when I create an Order for Mat A (Top level) - if this is why then fine but I wanted to check I am not missing something.
Moreover, if you make Mat X a collective (52) then it will see the stock for the component and give a reduced commitment date but my client does not want a collective order as they want to group the Make to stock items.
Yes if there was a planned order for Mat X then it would consider it.
My point is that am I right that pure ATP missing part will only consider one level in my example ?
any help buddies ?

007,
I don't know if I would call it a weakness. It is what it is. Its like spending the money for a Hyundai, and expecting the features of a Mercedes. Not gonna happen.
The client gets as much as he is willing to pay for. If he wants a multilevel availability check, then he must pay for the additional software that will perform this task (APO or third party), or he should commission a consulting company to write a custom application that performs this task within ERP.
All such decisions boil down to the client's willingness to spend money and resources. Its nothing to get frustrated about. After all, he is the one that made the decision to buy SAP ERP, not you. If he is unhappy, he can contact Walldorf.
Best Regards,
DB49

IDOC for missing parts list

Hi,
We would like to send the missing parts list generated from CO24 to other system. Is there any standard IDOC available to send missing parts?
I would appreciate your help.
Thanks.

Karthik,
Thanks for your quick reply. But this is not what I am looking out for. I am sorry, I think my question was not clear.
There is one functionality in Production Planning area that we can find out the missing parts for the production order. We have to send the information to our warehouse asking for the missing parts to fulfill the production order. Our warehouse is not on SAP so we want to send the information through an ALE/IDOC. In order to do this I wanted to know that is there any standard IDOC type which can be used or we have to create a custom IDOC.
Thanks.

When i do posting of goods, the error is "Mat. KEROSINE is a missing part"

Hi,
When I first time posting the qty for my material (kerosine) it shows the following error.
Help needed to solve this.
System Response----
The system could neither determine any MRP controller to notify nor any output type used to send the mail message.
Procedure
Please contact the MRP controller responsible or use the current stock/ requirements list to check for which purpose (production order, reservation, for example) the material KEROSINE is required.
Proceed
Action to be taken by system administrator
If the MRP controller wishes to be informed of missing parts situations via a mail message, you have to complete the following settings in the Customizing system of Inventory Management:
Missing parts check at goods receipt
set message determination
Regards

HI,
path: ImgMaterial ManagementInventory and physical management--plant parameters.
if you are using an IDES version copy the plant 1000 and change the plant to ur plant and make sure that the missing part field is unchecked and save it
hope this will reslove the problem
reward points if the answer is helpful
REgards,
Murali

Missing part in my T400, can't install pci-e card...

I tried to install a Intel Turbo Memory in my T400 (2767-PU6). However I found out something is missing.
The colored part is missing and I can't install the new pci-e card successfully. How can I do, or purchase the missing part?

Hi and welcome to the forum!
According to the support page, it's called "Bracket, antenna mini card" and the FRU for the entire kit is 45N5616:-
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70427
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70429
The kit costs $34 from IBM parts.
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

AWE 64 missing part (cap) help

Similar Messages

Maybe you are looking for