AX 2012 management pack not showing any AX information

1.
Symptom description: Ax
2012 management pack installed, detects machine and places them in the correct group but no AX specific monitoring happens. IE Under 'Application Object Servers\Computers' I can see my AOS servers, but under 'Application Object Servers\Instances' there
is nothing. It's the same for Enterprise Portals and there is nothing under 'Frameworks', 'databases' or 'Environment Health'. Under the SQL MP I can see all the databases that AX is using.
2.
Environment: System Center
2007 R2 CU5 running on Win 2K8 R2, all latest patches applied. All management packs at latest versions. All dependancies for the AX 2012 MP are loaded.
3.
The exact error message: No
error message as such, just missing information :
The state warning are just about disk fragmentation so can be ignored
4.
Any recent relevant configuration change(s): This
has never worked for either of our AX 2012 environments
5.
Tech diagnosis history: I
have followed the Guide for deploying the AX 2102 management pack. I've been assured by our AX team that by discovery user has the nessesary rights to the DB and AX, I've also tried using an AX\SQL admin account for the disovery with no joy.
6.
Log file(s):
Not sure what log files to look at?
Regards
Ollie

Hello Ollie,
It seems you have met a same issue with the one was disscussed here:
Troubleshooting AX Dynamics 2012 Management Pack
http://social.technet.microsoft.com/Forums/en-US/operationsmanagermgmtpacks/thread/8bb52ecd-6720-4ff2-9706-34593e455069/
Also, I would suggest you the following article:
How to Install and Configure Dynamics AX 2012 SCOM Pack
http://community.dynamics.com/product/ax/axtechnical/b/axdilip/archive/2011/12/19/how-to-install-and-configure-dynamics-ax-2012-scom-pack.aspx
Thanks,
Yog Li
TechNet Community Support

Similar Messages

After updating Firefox to 5.0.1 the add-ons Manager did not show any of my add-ons, although they were all running.

After updating Firefox to 5.0.1 the add-ons Manager did not show any of my add-ons, although they were all running. Several restarts of Firefox, even with the add-ons disabled did not bring them back. I then installed another add-on and after restarting, all of the previous add-ons are now shown in the manager.
Running on Mac 10.5.8. Add-ons installed:
Adblock Plus, Add-on Compatibility reporter, Ant Video Downloader, Forecastfox, Google toolbar, Reload Every, Session Manager, and Steep and Cheap Watcher.
Note: the troubleshooting information was taken after the problem was fixed. Prior to fixing the issue, there were no items under the Extensions heading. Add-on Compatibility Reporter was the add-on that was added to restore all of the other add-ons, even though it was already installed.

'''Good to know you solved your own problem by simply installing another extension''', I like solutions that aren't going to cause extra work, or loss of data.
Here is what people normally have to do for missing extensions, as if not installed.-- https://support.mozilla.com/questions/826729
:http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_%28Firefox%29
FWIW, renaming or deleting extensions.sqlite and the other files beginning with "extensions." causes the files to be rebuilt from the extensions directory, so nothing is lost, but they will be restored in alphabetical order.
I've solved places.sqlite problems by simply restoring a bookmarks backup, or creating a bookmarks backup and restoring that rather than face loss of history.
Please mark as solved so others will see your answer when looking for solved problems as solutions to there own or other people's problems.

Network Management Reports not showing any data on scom 2012 r2

Hello,
I have imported Windows Server operating system Management Packs and it started monitoring the windows server system and network adapter state showing healthy state for all the adapter attached to Virtual Windows Server 2012 Machine.
but none of data showing on Network Management Reports ,all the other reports are working properly. If Its need to enable some monitor which are disable by default, pl z list what are the monitors how to enable those monitors?
May I first need to Deploy agent particularly on network adapter ?
Regards
RICHA KM

Hi,
I think you could start from here:
Monitoring Networks by Using Operations Manager
http://technet.microsoft.com/en-us/library/hh212935.aspx
System Center Operations Manager 2012: Network Devices with Extended Monitoring Capability
http://www.microsoft.com/en-us/download/details.aspx?id=26831
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Extensions manager CC not showing any products or working properly

CC 2014, Extensions Manager CC
Shows that it is installed on the desktop app and launches...but does not recognize any products. If I attempt to launch from Premiere Pro, I get an error saying its not installed on the machine, but it is. I have uninstalled, reinstalled...and I have also used CC cleaner.
Any help?

Please refer to Re: Why can't I see InDesign CC in my Extension Manager CC.

HT5527 My iCloud account does not show any additional storage beyond the 5GB

My iCloud account manager does not show any storage beyond the standard 5 Gbytes that are free. I supposedly have been granted additional storage according to an email from Apple but where is it?

iMovie on your Mac has nothing to do with iCloud storage. Download and use Find Any File to search for your iMovie project. FAF can search areas that Spotlight can't, like invisible folders, packages and system folders. If there a file with your file name on it anywhere on the hard drive FAF will find it.
Do you have Time Machine enabled backing up to an external HD? This situation is exactly what TM is good at. It makes hourly backups so you can go back to find and restore the missing file. All HDs crash at some time or another and having a good backup strategy is the only protection against that.

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

SCEP manager is not showing current logs for any SCEP clients

I have installed SCEP manager on one machine and it is managing one client, which is on another machine.
Client is showing virus detected logs in SCEP client UI, but the same events/logs are not getting stored in SCEP manager database, i tried pulling out records from database, there is no entry for detected viruses in the database, and SCEP manager UI monitor
tab is also not showing any detected events.

Hi,
Active means that it has been active and communicated with the MP within the last 7 days, not that it is active now.
That means that you either haven't extended the Active Directory or created the System Management container in AD and delegated permission to that container and all the child object to the ConfigMgr Primary Site Server Computer account. But that isn't a
requirement only a rekommendation.
If you look in the client in ClientLocation.log file can the client find an MP to communicate with? Any more errors in the MPcontrol.log file on the server?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Why does Group created on Master console does not show any device count mapped on the managed Amp?

Q: Why does Group created on Master console does not show any device count mapped on the managed Amp?
A: When a group is created on master console it will be pushed to all the managed amp which is added with Manage group configuration enabled. The Group pushed to the managed amp will be created as Global group and you can create subscriber groups for the global group to which you will add the device into since we cannot add any devices into global group directly.
Hence there is no device added to the global group, on the master console it does not show any device count for the groups that are created on master console.

Laura Quitugua wrote:
Hi,
I have syced my outlook email with my iphone 4s and ipad.
Note that only the email account info (username, login, server) is sync'd.
The actual emails are not sync'd.
Opening an email on one device does nothing on teh other devices.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

IPhoto 9 does not show any photo of old Mac Mini's iPhoto 7 library

I'm trying to migrate an 80GB iPhoto library from my old Mac Mini to a new iMac. The old Mac Mini has iPhoto version 7. The new iMac iPhoto 9.
When I copied the complete library, iPhoto does not show any photos. How can I fix this? I already tried:
Using iPhoto Library Upgrader – however it shows: Your library can open with the current version of iPhoto and does not need to be prepared with this tool.
Using iPhoto's rebuilding etc functions on both Macs – this does not do the trick
Using iPhoto Library Manager – also shows 0 photo and rebuilding does not work.
Anybody knows a solution?
Thanks!

Doesn't work :
It is also quite strange that iPhoto just opens the library without any warnings, but without showing any of the content (photos, albums, etc.)

The tracks menu in Galery does not show any music ...

Hi,
I have recently bought the E71. Looking at its various features, got interested to download some themes. I got these websites (to download themes) from the nokia discussion's page itself, so no worries there.
Amazingly, when I finished downloading and loaded one of the themes, I noticed that the TRACKS in galery does not show any sub menus, you know like, all songs, playlistes, artists, etc.
I tried uploading some new songs and got the same issue, though these tracks showed up in the file manager option and even played.
I have formated the phone to factory settings but it didn't help. Now I'm going for a software update, but I don;t think that if the software is not updated the phone will give such issues.
Please suggest and help. It's just been a month that I bought this costly handset.
I really need a solution.
Regards
Aditya

You need to go the "Music Player" and select "Options" and "Refresh". Let it do it's thing and then you should see music you uploaded.
N97 (Product Code: 0585262 (Voda UK)) FW 12.0.026
95 8Gb (Product Code: 0558787 (UK)) FW 31.0.018
If a post by a user has been helpful, please click on the Kudos! button.

When go to mozilla check plugins, it does not show any plugins! i do have several plugins

i am unable to view flash player files despite i have flash player installed and enabled. when i go to check plugins at mozilla, it does not show any plugins! i will appreciate your help

There are two different versions of Flash, one for IE (ActiveX version) and another for other browsers (Plugin version).
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Tables & Index not showing any data

Hi All,
I have done the db2 upgradtion from 9.1 to 9.7 with fix pack 4.I am unable to see table size after upgrade. I have checked all the sap collector job running fine.
db02>history>tables& index not showing any data
Regrads,
Mnai

Please make sure RSCOL00 running or execute it manually.
Did you try to run the stats in DB13 ?

Hub Manager does not show Wireless connection

My 'Hub Manager' shows my Ethernet connected PC; my hub phone and the wireless connected printer.
My daughter has a new laptop which has wireless connection to my Hub. According to her laptop it is connected to my Hub and she has access to the internet.
However, my Hub Manager does not show her as connected to the Hub. The result of this means that she cannot connect to the wireless printer.
We have disconnected and re connected to no avail.
Any thoughts??? All help appreciated.

Hi
to get more replies suggest you repost on the broadband board
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Disk Utility does not show any result....

Dear Apple Community,
on my mid 2012 Mac Book Air the disk utility test does not show any result. The test just stops at some point and can be restarted again, but does not show weather the SSD is damaged or not.
Does anyone know what this means?
Thanks a lot for your advice!

I think this happens to everyone (who uses "Live Verification") in Mavericks. Occasionally the output from the test shows correctly, but usually not. I guess this will get fixed someday.
Apple - Mac OS X - Feedback
For now, probably you will get best results from using command-r at startup to get into "recovery mode", then run disk utility from there.
charlie

AX 2012 management pack not showing any AX information

Similar Messages

Maybe you are looking for