Backend RFC change makes all MBO's stop working

I created an MBO using a SAP RFC.
I had to later change the RFC and remove one field (PRODUCT_GUID) from the return list.
I then deleted and recreated the MBO with the changed RFC signature.
Now, whenever I make an MBO call, I get an error saying the field PRODUCT_GUID was not found.
This happens irrespective of which MBO request is made.
There are no relationships and no other MBO references the PRODUCT_GUID field.
The exact error is worded as follows.
Sybase.UnwiredPlatform.WorkflowClient.RequestFailedException: java.lang.RuntimeException:Field not found for column 'ET_LIST_RESULT.PRODUCT_GUID' and key '/ET_LIST_RESULT[-1]/PRODUCT_GUID'.
at Sybase.UnwiredPlatform.WorkflowClient.Responder.ProcessSyncRequest(ContextData oContextData, String sData)
at iAnywhere.MobileOffice.AMP.PluginProxy.RunSyncRequest(PluginCallContext oCallContext), details= Error: 1053 Native Error: -2146233088 Message: 'Sybase.UnwiredPlatform.WorkflowClient.RequestFailedException: java.lang.RuntimeException:Field not found for column 'ET_LIST_RESULT.PRODUCT_GUID' and key '/ET_LIST_RESULT[-1]/PRODUCT_GUID'

Hi,
You have to remove the filed and key of PRODUCT_GUID from workflow packages. Open your workflow package and view the properties, all the key values would be listed in "KEY" tab. Remove the unwanted key which you have specified in your question. Deploy the workflow package once again, when deploy make sure "Update generated code" be enabled. Before regenerating code, take backup, otherwise all the UI work will go off.
Regards
Yokesvaran K

Similar Messages

All input devices stop working suddenly

Every now and then ALL input devices stop working,ths is not temporary - a forced shut down is needed
What happens is that I am happily working away when suddenly all input devices stop working with no warning, so the light goes off on my Wacom (Intuous 3) tablet, the keyboard and the apple trackpad are not responded to i.e. the cursor stays where it was on the screen prevously and I am left with the only option to restart by holding down the power button
any thoughts or similar experiences

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n%s\n' "$1" "$o"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; };{ system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; o=$(crontab -l); PR "User cron tasks"; o=$(cat /e*/lau*); PR "Global launchd configuration"; o=$(cat ~/.lau*); PR "Per-user launchd configuration"; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist"); ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will be automatically copied to the Clipboard. Paste into a reply to this message. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: Step 2 might not produce any output, in which case the Clipboard will be empty.
You can then quit Terminal.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — type only your password. Also remember to post the output.

After installing version 5 upgrade to my Iphone 4 all the apps stopped working.

After installing version 5 upgrade to my Iphone 4 all the apps stopped working and I cannot reinstall them at the Appstore giving me a message that I have already purchased them. I can see all the apps, click on them, but none of them will open. How can I make them work again, since the Appstore will not allow me to reinstall the apps? The only apps that are working are the ones pre-installed by the upgrade.

marco216 wrote:
After installing version 5 upgrade to my Iphone 4 all the apps stopped working and I cannot reinstall them at the Appstore giving me a message that I have already purchased them. I can see all the apps, click on them, but none of them will open. How can I make them work again, since the Appstore will not allow me to reinstall the apps? The only apps that are working are the ones pre-installed by the upgrade.
Try downloading any free app using the App Store on the phone.

All Music & Videos stop working on Macbook Pro

I've had my 15" Macbook Pro for 6 months now. If my Macbook has been on for a while, at some point all media randomly stops working; when Quicktime tries to open a file it opens it partially and freezes at the "loading movie" sign. If iTunes is already open before this problem occurs, it will work fine, but if I close iTunes & try to open it again it will crash and I'll have to force quit it. Videos and music in web browsers such as Firefox and Safari either won't work or causes the browsers to crash. Along with this programs like Photobooth crash. The only hint I've got to what's going on is that when I open After Effects after all this happens it freezes upon opening whilst "initialising Media Core," and Sibelius does the same whilst "Initialising Playback System"
So I'm guessing there's something wrong with my Macbook Pro's "media core"/"playback system".
The only way to sort this problem out is to log out & log back in again, but after a while the same thing happens and all media stops working. Having to close all my applications to log out and log back in again can get really annoying. This problem started about a month or so ago and I have no idea what triggered it or how to fix it.
I was wondering if anyone else has encountered this sort of behaviour with their Mac and know how to fix it?
Thank You.

I would try some basic repairs and see if that helps.
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
 DALE

All reply buttons stopped working in rel. 24.3.0

this morning all reply buttons stopped working. I can compose emails but cannot reply to anyone.
No voluntary update was made in the last days and everything was working properly till Friday, three days ago.
May you please urgently help me?
Thanks very much

Is it possibly due to an add-on? http://gsfn.us/t/4h1ve

Can't make font bold, shortcut stopped working

In the last week or so a few of our users have no longer been able to use the keyboard shortcut to make some fonts bold even though you can go select the bold from the type menu so obviously the bold version is installed and active. After talking with others in our group, some of them have had this happen in the past and then things resolved on their own. I researched this and found the thread here
http://forums.adobe.com/message/2653026#2653026
which mentioned that some fonts don't contain the data to indicate that they contain a bold version, but that theory doesn't seem to apply in our situation. We use a set of corporate fonts that have not changed and the same version of the fonts are installed on all our computers, which are all cloned off a single image so set up is identical. Some users can make the fonts bold using shortcuts and others cannot, so I don't think it has anything to do with the font itself not containing the proper data or it wouldn't work on any of the computers. Also, if I switch to a different user on the same computer I am able to use the shortcut keys so again. Could there be any other reason why the shortcut keys would simply stop working? I've tried replacing InDesign's preference files and that does not work either. We are running CS4 on OS X 10.5.8.

[email protected] wrote:
Just wanted to follow-up. I have been in contact with Extensis regarding this issue and they were able to replicate it with several of our fonts. The very nice representative I've been working with said that the issue would be passed on to their product managers to review for a possible fix in a future release. Until then if you add your fonts in place rather than into the fontvault, your shortcuts keys in InDesign should work fine.
I'm having this issue on the latest version of InDesign. At first I thought it was related to Suitcase, but after updating Suitcase to the latest version, trashing all my prefs and FontVault, re-adding all my fonts, and clearing all my system's font caches, the problem still happens.
Then I realized it's not related to Suitcase at all, but to certain font families. I'm not sure what causes it, maybe it's because these families have a Roman, Regular, Bold, Extra Bold, Black, Condensed, Bold Condensed, etc. and it just doesn't know which one to pick, so it does nothing? It should at least toggle between Roman and Bold, though!
This is a very frustrating problem. Anyone know how to fix it? I even tried making a character style called "Bold" and setting a shortcut for it, but any keys I press to set the shortcut, it just beeps at me and nothing happens! Argh!

All my buttons stopped working, and i have no error in codes or anything :s

So i am working in an iOS app using Adobe flash pro cs6 and i had all my btn starting on frame on, in the background layer, so the btns never dissappear so is the layer that contains the code for those 3 buttons (Back, Menu, Next) the as3 layer and the background n buttons layer have a key frame in the frame 2 until frame 100 with no other keyframes.. so i decided to add a menu right in the first frame (1) with 3 more buttons (actually fully working all 3) and i notice that when i delete the codes in frame one (Menu buttons) the other 3 buttons start working, if i code again then the 3 buttons is the frame two stop working, here are my codes:
The three buttons of the menu (the working one, but when i delete the code the others start working)
/*import flash.events.MouseEvent;
stop();
chapt_sel.addEventListener(MouseEvent.CLICK, ChapterSelect);
inst_btn.addEventListener(MouseEvent.CLICK, Instructions);
abt_btn.addEventListener(MouseEvent.CLICK, AboutME);
function ChapterSelect(evt:MouseEvent) :void {
          gotoAndStop(5);
function Instructions (e:MouseEvent) :void {
          gotoAndStop(2);
function AboutME(a:MouseEvent) :void {
          gotoAndStop(15);
as you see it has the /* */ to close the code so the other buttons work
and here's the code for the NON-Working one, unless i close the code above:
import flash.events.MouseEvent;
stop();
// EventListeners n others
menu_btn.addEventListener(MouseEvent.CLICK, menuFunc);
next_btn.addEventListener(MouseEvent.CLICK, nextFunc);
back_btn.addEventListener(MouseEvent.CLICK, backFunc);
// Variables
// Functions
function backFunc(evt:MouseEvent):void
     var invalidFrameNumbers:Array = new Array(1, 5, 11, 13);
     var validPress:Boolean = true;
     for (var i:int = 0; i < invalidFrameNumbers.length; i++)
          if (invalidFrameNumbers[i] == this.currentFrame)
               validPress = false;
               break;
     if (validPress)
          prevFrame();
function nextFunc(e:MouseEvent):void
    var invalidFrames:Array = new Array(5, 12);
    var validPress:Boolean = true;
    for (var i:int = 0; i < invalidFrames.length; i++)
        trace('Checking if invalidFrame[' + invalidFrames[i] + '] == [' + this.currentFrame + ']');
        if (invalidFrames[i] == this.currentFrame)
            trace('Invalid frame matched, press invalid');
            validPress = false;
            break;
    if (validPress)
        trace('No invalid frame detected, running nextFrame()');
        nextFrame();
function menuFunc(a:MouseEvent) :void {
          gotoAndStop(1);
Please help :s

to make not visible:
menu_btn.visible=false;
next_btn.visible=false;
back_btn.visible=false;
to make visible (the default setting unless code like the above executes):
menu_btn.visible=true;
next_btn.visible=true;
back_btn.visible=true;

All Linksys equipment stopped working! But have internet with NON LinkSYS equipment

My setup is eccentric but has worked for very long. It stopped working Friday. Let me first say there is a reason why I set it up this way. The reason for my setup is based on location of various IP equipment and when I originally purchased the equipment (in case you are wondering why I didn't go a different route). All routers and network card/devices are Linksys. The only non LinkSYS device is a Netgear Print server and 1 PCI card installed on a 2nd PC.
Here is my setup: From a high speed modem, into a wireless BEFW11S4 (4 port router). Port 1 unused. Port 2 to a second wired router, (for DIRECTV VOD and future VUDU) on the other side of house. Port 3 to a local PC. Port 4 to wireless router WRT54G on the far end of house (I used one of the ports not the WAN connection). Wireless is active for both routers. DHCP is disabled except for main basement router. I treated all routers beyond basement one as gateways per say.
My problem: I have several PC's with wireless cards/ devices. Only one working is 1 XP laptop Dell, as noted below (non Linksys) and does so wirelessly and also with a wired connection. The Directv also works from wired router (2nd in line). The Wii also works properly from either wireless router. Of course my PC to the first router also sees the internet. All locations see both routers with 80+% signal. My house is small, but do to wiring limitations, this is the best solution to get internet.
MY PC setups, models given are Linksys except as stated:
1 XP PC w/WUSB54G (USB card)
1 2000 Pro w/ Netgear WG311 (PCI card) Very old PC and does not see internet, it does search and find both routers with high signal. Internet has worked in the past, although not used for some time. I can possibly assume it just does not work or may also be related to this issue.
1 XP Dell with internal wireless (working fine!) Will work with either wireless router and also communicates with print server successfully.
1 2000 Pro w/WPC11 PCMCIA card
1 XP with Linksys PCI card (don't have model number handy)
I also changed ports of the wired equipment to verify it wasn't a bad port. I have internet connectivity on non Linksys equipment. Some of the computers I use daily, the others have not been turned on in a very long time. After problem arose, I decided to check these computers too. I have not made any changes to the setup. As stated I came home and noticed no internet and went to troubleshoot issue. I have used the Linksys software on all products listed to setup the network.(Original disks that came with each equipment) It will show it can see the routers, but shows NO internet connectivity, but all show it sees either router, but does not see the internet. I must stress that I have not altered any of the setup, it just stopped without warning.
At first I assumed it may just be the wire to one router. (The WRT45G). I have also unplugged all equipment, renewed IP, restarted PC, and also repowered modem. What is bothering me is that the DELL is working fine, including being able to print, the Wii is fine and talks out, and I can renew IP and download VOD from the second wired router and DIRECTV reciever. I also assumed that maybe it was an issue with a new Microsoft patch but a few of the PC's have not been on in months, well before this problem arose. Thank you for taking the time to read this lengthy post. I wanted to be as complete as possible. Any suggestions or ideas is appreciated. I have not found any solution on this forum or off of the internet.
NOTE: I also reinstalled software to 2 PC's including reentering my WEP. This has not solved issue either. Problem remains the same. I have also checked internet properties and network configs (on those PCs) although I cannot imagine every PC has changed itself.
Solved!
Go to Solution.

It does not seem to be an adapter or any of your computer's issue, from what you have described I would assume that your router is experiencing some connectivity issues...You should reset both your router's and then re-configure them both...
As you explained that one computer to the first router connects to internet, you may download the first router's firmware and upgrade it...You may download the firmware from here
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Similarly upgrade your second router and upgrade it's firmware...I think after this you should be able to get connection on all the computers...

Exchange SP2 makes OWA and Activesync stop working

Software:
Windows 2003 Server
Exchange 2003 SP2
Activesync
Symantec antivirus
I have just updated to servicepack 2 on exchange 2003. The reason why I did so, was that the SP2 had many fixes to bugs that has been annoying and needed to be installed on our system. The upgrade went perfectly, until an hour after the upgrade. Then Activesync and OWA stopped working. I got the error that the Hotfix 259867 should fix, after abot 1 hour in the telephone I got the hotfix sent over. This removed the error message. But there came a new error message (or several if you want).
The OWA works for a half hour, when restarting the services, then it crashes again, same stuff with activesync.
I really need some help here, anyone got a clue?
Following error message stille appears in the eventvwr.
Under System:
Event Type:      Warning
Event Source:   W3SVC
Event Category:            None
Event ID:          1011
Date:                03.08.2006
Time:                15:55:17
User:                N/A
Computer:        NOREXCH
Description:
A process serving application pool 'ExchangeApplicationPool' suffered a fatal communication error with the World Wide Web Publishing Service. The process id was '4844'. The data field contains the error number.
Event Type:      Error
Event Source:   W3SVC
Event Category:            None
Event ID:          1002
Date:                03.08.2006
Time:                15:55:17
User:                N/A
Computer:        NOREXCH
Description:
Application pool 'ExchangeApplicationPool' is being automatically disabled due to a series of failures in the process(es) serving that application pool.
Application:
Event Type:      Error
Event Source:   Application Error
Event Category:            (100)
Event ID:          1000
Date:                03.08.2006
Time:                15:55:12
User:                N/A
Computer:        NOREXCH
Description:
Faulting application w3wp.exe, version 6.0.3790.1830, faulting module msvcrt.dll, version 7.0.3790.1830, fault address 0x00038e24.

I THINK I found a fix!
First to answer the question about log entries... None, that's one of the things thats made this so difficult to trace down.
Now onto what fixed the issue for me. The client has approx 1250 users on a single quad proc box. The majority of the users (approx 1,000) access the server via OWA the other 250 access it using RPC over HTTPs. I wanted to see if RPC over HTTPs was causing the issue so I disabled access to the virtual directory. After doing that OWA was accessible for more than 30 minutes.
In my quest to find the fix for this problem I saw a post that someone renamed the rpcpoxy.dll file and it got recreated so i followed suite. After stopping the site, renaming the file, enabling access to the rpc virtual and starting the stie ALL services have been available for more than 1 hour without issue.
After looking into the rpcproxy.dll file I see that it was updated with SP2 server update.
If things change I will post back but for now things are looking good considering it had gotten so bad over the past few days that OWA was accessible for less than 2 minutes after an iisreset.

All apps have stopped working after syncing with itunes

Hello everyone,
Extremely frustrated to find that after plugging my iphone into my comp for the first time since i've had it (about 3 months). I knew I had a good reason for avoiding plugging my iphone into the comp, because I have 2 other ipods and hate the way itunes tries to take over and do everything. No, i'm quite happy to manual manage the files on it. Especially when irritating things like this happen.
So I plugged it in for the first time on Saturday, and guess what, now NONE of my apps work anymore. Seems to be a common problem that no one at apple cares to admit. (http://discussions.apple.com/thread.jspa?messageID=8294502) this old thread details the problem I am having. Now the apps start to open and close and dont work. Awesome.
I would've been more than happy to eat humble pie if i'd done ANYTHING dodgy to this iphone, but I haven't, and apples OWN device controlling application destroyed the functionality of the device, which I now have to figure out how to fix myself. Of course, apple wouldn't have any documentation on this issue.
Its sad really as up till now Ive had a flawless experience with the device and enjoyed everything about it, mostly how it works so well and everything is easy to do. Extremely irritated about this - will be telling everyone who cares about this experience.
Now, apple, or more like apples forum goers, how do i fix what itunes has done???

Three days and no response, 3 others mentionining same problem.
Apple clearly do not care about customers or have any interests in bug fixing their own software. This is clearly a widespread problem which has nothing to do with user software, the bug is in iTunes and apple dont even care to admit it or fix it. It doesn't even look like they monitor their support forums at all!
I was considering buyign a macbook. Ha ha ha. Good luck. Not anymore.
Have even called support and Apple are USELESS and I will not forget this experience, as will my friends.
My advice? Get an android phone... we all know that it will only take a month or two till google gets a much bigger app library. Hey and guess what - they'll let you maintain your phone manually if you want, and dont force you through some stupid clunky, resource intensive, bug filled program which makes everything stop working. Exactly what it did to me on first connection.

Help, 10.6.8 update, all usb ports stop working after 10hrs

I've been running 10.5.8 for ever and finnaly tried to update to 10.6.8.. After I did it, the usb ports all kick out any connected devises after around 10 or so hours. I ran of the install disk, using disc utillty, disk repair, and repair permisions a few times and it did not help.
I did the install a few times again to try to see if it would help and didnt.
i tried an erase and install and migrated everything over from my orignal back up external drive that is running 10.5.8 and issue is still there.
My old 10.5.8 back up external drive works fine and does not have this issue, and I have been using that as my start up drive instead and working from there. But that is not really a solution and a temp work around.
Any suggestions would really help. thanks!

I have a early 2008 macbookpro 2.8 duel with silver keys.
I purchaed the 10.6 disk from the apple store. I've had the machine for years and purchased it refurbished from apple.
I did the erase and install and migrated everything over from external drive, then did update to 10.6.8 and the usb ports still would stop working after a few hours.. Then I read on another apple community forus to reset pram, and pull out the power cable, take out the battery and hold power key for 5 seconds, then restart. that seemed to fix usb issue so far..
But overall my computer seems to be running slower then when using just 10.5.8 and it did not wake from sleep once and I had to force power off and restart.. But maybe its just getting used to 10.6.8. we will see..
Also, on another note, my battery is totally dead, and I can only run computer with power cable.. Will this affect things? it never did with 10.5.8..
Oh, on my erase and install, I just did the simplest version and did not do the full erase to zero using he advanced security measures.. I just did the one where it writes on top of everything..

ITunes8 -- all optical drives stopped working

After installing iTunes 8, all my optical drives stopped working. Windows simply didn't recognize them. Device manager said they were missing. However the BIOS found them. Uninstalling iTunes8 fixed it.
However, like everyone else here, now I can't return to a previous version of iTunes because it refuses to recognize my library file (a .itl file).
Argg
What can I do, to either use an older version of iTunes, or fix this problem?

I tried the suggested fix on Apple's site (http://support.apple.com/kb/TS2372?viewlocale=en_US) but both my DVD drives remained invisible.
Then I tried the one at MS suggested by Adrian Kingsley-Hughes on his ZDNet blog (http://blogs.zdnet.com/hardware/?p=2600):
http://support.microsoft.com/kb/314060
Hooray! It worked! Not only have my drives reappeared, but I am burning a DVD right now using InfraRecorder.
Unfortunately, now I get a nasty message about missing registry data whenever I start iTunes, but I assume Apple will fix this problem in some future release. I'll have to live with it until then.
I spent hours on this today and almost ordered some new SATA drives, thinking the IDE controller on my mobo must have gone bad. I really appreciate the existence of Adrian's blog and other third party resources!
And I am very annoyed at Apple right now. Releasing software that breaks peoples' computers in a major way is not acceptable, IMHO. Leaving the bad software out there and posting fixes that don't work is even worse.
BTW, I am running XP Pro SP2. I have Logitech hardware and software installed, as well as a number of other USB devices (Treo, Canon printer and scanner, iPod) so (according to Adrian and other sources) I guess I was a likely victim.
Note that, having been burned before by new major releases of iTunes, I was cautious: I held off on installing iTunes 8 until the second release, hoping they'd have fixed any really bad bugs that showed up in the first release by then.
Silly me.

All Letter Keys Stop Working

this has happened to me twice this week. and i don't know what is causing it.
i will be in the middle of working and all of a sudden all the letter keys stop working (i.e. i can't type anything)
However, the mouse still works, the arrow keys still work, the modifier keys still work... it's just the letter keys that stop working.
A simple Relaunch of Finder seems to do the trick, but i'm just curious how this problem is happening...
Any info on this would be great!
Thanks!

What system is this on?
It sounds like you're activating the numeric keypad that's overlayed on the standard keyboard. If this is a PowerBook or MacBook it's toggled by pressing the F6 key on the keyboard. When it's on (the key lights up), all the letter keys are disabled and only the keys with the subscript numbers and math operators are active.

When i change the camera the app stop working ?

I have a problem with my i pad ! When i change the camera to the front the app stop working ! How i can solve this problem ?

Try closing the camera app and reset your iPad. See if that fixes the issue for you.
Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Why did all my shortcuts stop working?

After the latest update all of my text shortcuts stopped working. It is frustrating for me because I use the shortcuts to speed up texts for business so I need these to work again. Suggestions?

I have this issue too, I used arround 230 shortcuts for my work !
Please help us to fix it

Backend RFC change makes all MBO's stop working

Similar Messages

Maybe you are looking for