Backend Service Initialization Error in EP 7.0

Hi All,
I have installed EP 7.0 on Win 2003 Server, with SP 9.0
When i open User Administration tab it gives me following error.
An error occurred when initializing a backend service; contact your system administrator
Can any one guide me with this error.
Thanks in advance
Regards
Sachin

Sachin,
Restart the whole Cluster instance and try to login again.
The error looks like JVM Memory Setting issue.
Check SAP Notes :723909 & 710146.
If it doesnt resolve the issue check your Permission settings like below:
Go to UserAdmin page of Portal like below:
http://<Host_name>:<Port>/useradmin
Provide j2ee_admin/Administrator credentials and in the same window go to the Portal URL go to
System Admin->Permission->Security Zones->
Add Built-in Group "Everyone" and assign Read Permission and check the End User chec box.
Let me know if you face any issues.
If the above steps doesnt resolve the issue provide me the latest last few lines of log files from
<Drive>:/usr/sap/<SID>/<instance>/j2ee/cluster/server0/log/defaultTrace<NUM>.trc
Regards,
Karthick Eswaran

Similar Messages

Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f.

PLease help, I've rstored from backup three times with no success I'm getting the following error
"Unable to initialize the Microsoft Exchange Information Store service. - Error 0x96f. "
It's LDap related but i have no idea why :-(
Best Regards Bernhard

IPv6 had been disabled for months on my SBS 2008 Server running Exchange 2007 SP1. I ran 40 or so Windows Updates; subsequently, the next morning Exchange was no longer running; topology issues, event ID 2604, 2114 and 2601 were all over my Application
Log. After 12 hours of research I found this post; figured it was worth a shot and instantly all my services for Exchange fired up. Thanks for the tip; I have no idea which update changed what in regards to needing IPv6 enabled, but that silly
little check mark fixed it.
Thank you for sharing your solution!
Dan

UME ABAP Error in Backend Service

Hi Everyone,
We are having problems with an ABAP based UME on EP7. SSO is working and when we create users in R/3(ECC 6.0) we can immediately use them to log on to the portal. However, when we go to User Administration --> Identity Management on the portal we get an error "An error occured when initializing a backend service; contact your system administrator".
It does not seem to be the authorization of the SAPJSF user either as we have assigned the proper authorizations(SAP_BC_JSF_COMMUNICATION).
Because of this error we are not able to add portal roles to users. Hence, when we try to access the UME configuration under System Configuration it says that we are not authorized to access the UME Config Editor.
Has anyone encountered this problem before? I would greatly appreciate your inputs. Generous points will be awarded!
Here is a link to the screen shots:
[IMG]http://i2.photobucket.com/albums/y3/xanderbmw/UMEerror.jpg[/IMG]
Thanks again!

Hi Alexander,
sounds like your UME access to ABAP has a few problems. Common mistakes are the SAPJSF user or missing sapms entries in the services file.
Try the UME Consistency Check tool, this tool helps you to remove logical inconsistencies in the UME database, the installation procedure and some extra information about how to use is mentioned on SAP Note 818947.
if it helpful reward points are appreciated

Error On Starting POP3 Backend service

I install Exchange server 2013 CAS and Mailbox on same server and try to start pop3 on it.
i start pop3 service successfully but when i try to start pop3 backend service i recieve the following warning:
"The Microsoft Exchange POP3 Backend service on Local Computer started and then stopped. some services stop automatically if they are not in user by other services or programs."
i could not found any helpful guide to solve the problem.
please tell me what should i do to start POP3 Backednd service Successfully.

Do you have any error in event-viewer related to POP3?
Microsoft Exchange POP3 service started or problem with both?
Please check any service using the same port using this command netstat -ano | findstr 995
This will list you the IP address and PID number if any serice using the same port. Please check the service from taskmanager by PID. Check this
Thanks
MAS
Please mark as helpful if you find my contribution helpful or as an answer if it does answer your question.
That will encourage me - and others

Synchronization Failed. Error is Firefox service initialization failed.

Synchronization Failed. Error is Firefox service initialization failed.
Synchronization Failed. Error is Firefox service initialization failed. 
I have been having this issue for quite some time with Firefox. I am using the Nightly build (23.0a1) and have been using for more than 2 years. Synchronization was working fine till a few weeks ago. Synchronization of XMarks on Chrome Dev works fine and no problem. It's only with Firefox. Things I've tried but no success:
1) I deleted my profile off of xmarks and created a new one and tried syncing again. No success. 
2) deleted firefox, deleted the profile folder under AppData. Reinstalled everything fresh, and still no success. 
My log file shows the following... Not sure what to check. Anyone help me? Thanks!
<pre><nowiki>[2013-04-06 08:54:19] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:54:19] Host browser is FF14+, use private DB
[2013-04-06 08:54:19] Created nid_map table
[2013-04-06 08:55:12] Starting modal auth(true, undefined)
[2013-04-06 08:55:19] Could not load login iframe: {}
[2013-04-06 08:55:31] Finished modal auth with result 0
[2013-04-06 08:55:31] Entered OnTransitionPageShow()
[2013-04-06 08:55:31] ------ Xmarks/4.1.3 (/Places) starting status with sync.xmarks.com ------
[2013-04-06 08:55:31] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:55:31] Host browser is FF14+, use private DB
[2013-04-06 08:55:31] Entered Status...
[2013-04-06 08:55:31] >>> POST http://sync.xmarks.com/sync/bookmarks...
[2013-04-06 08:55:31] >>> Body is: {}
[2013-04-06 08:55:32] >>> Callback ({username:"dmadapps", status:0, toprev:1, isreset:true})
[2013-04-06 08:55:32] Success: Account verified.
[2013-04-06 08:55:32] gCanSyncPasswords is true
[2013-04-06 08:55:32] ------ Xmarks/4.1.3 (/Places) starting getProfileNames with login.xmarks.com ------
[2013-04-06 08:55:32] >>> POST http://login.xmarks.com/user/profiles...
[2013-04-06 08:55:32] >>> Body is: {"log":{"mid":"hf6uh7gn","serp":0,"ssEnabled":false,"sbsEnabled":true}}
[2013-04-06 08:55:32] >>> Callback ({status:0, profiles:{}})
[2013-04-06 08:55:32] Success: Operation successful
[2013-04-06 08:55:32] Calling wizard.advance()
[2013-04-06 08:55:40] ------ Xmarks/4.1.3 (/Places) starting initial sync with sync.xmarks.com ------
[2013-04-06 08:55:40] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:55:40] Host browser is FF14+, use private DB
[2013-04-06 08:55:40] Entered Status...
[2013-04-06 08:55:40] >>> POST http://sync.xmarks.com/sync/bookmarks...
[2013-04-06 08:55:40] >>> Body is: {}
[2013-04-06 08:55:41] >>> Callback ({username:"dmadapps", status:0, toprev:1, isreset:true})
[2013-04-06 08:55:41] Returned error: Firefox service initialization failed(6)
[2013-04-06 08:55:41] Will retry at Sat Apr 06 2013 09:10:44 GMT-0500 (Central Standard Time)</nowiki></pre>

Re Patrick's suggestion above, I was able to get Xmarks working again on both my Win 7 laptop and desktop today by uninstalling my Aurora browser completely and then installing the regular release version of Firefox, 20.0.1.
When I uninstalled Aurora, it asked me if I wanted to keep my customizations and personal data, and even though it meant a bit more restoration work later, I decided to try erasing all my Aurora settings and data and starting fresh. (But before doing so, I backed up all my bookmarks by exporting to an html file and my add-on settings via Firefox Sync.
After that, I installed and started with a clean slate version of regular Firefox, and proceeded to then reinstall my various add-ons and import my saved bookmarks from the html file. As soon as I re-installed Xmarks and re-logged into my Xmarks account, the automatic syncing process went fine and no more error messages or failures.
I had been using Aurora for months prior with Xmarks and never had any syncing problem until the first week of April. And at that point, the syncing function broke on both my laptop and desktop, which were both running the daily updated versions of Aurora. So I'm believing that something was changed in Aurora that caused this problem.

Identity Services Engine Initialization Error

I have been working with TAC and other's at Cisco to resolve this problem, and also have a case open with the developers. However, I thought it might be a good idea to open it up to you all to see if you had encountered this problem in the past.
I am running ISE 1.1.1 and when my BYOD devices join the SSID I get a white page that just says there was an internal error and to consult my system administrator or the logs. The process is this. The user selects the SSID (FlexConnect AP, centrally switched), they are prompted for their AD credentials, when authenticated they are redirected to the supplicant provisioning process (self provisioning portal). I know the config is correct because I have had people above at Cisco (above TAC) helping me configure this. However, when they get redirected it simply shows the afore mentioned white error page. If you look in the logs it says it is an initialization error. Has anyone ever had this problem?

It is ISE version 1.1.1. Yes I have the acl in correctly including sending back as the airespace acl. The acl is simple and has full IP connectivity to ISE. I am not using the cwa option. I am using peap with AD as the identity store. Once that authenticates it uses an authorization policy that redirects to nsp. Cwa is one way of doing it but that is not the way we do it because that would redirect you to the guest portal and we are redirecting to the self provisioning portal.
Sent from Cisco Technical Support iPhone App

Standard backend service data vanishes on click of a button in HCM Forms

Hi,
I have a form which displays data from standard backend service SAP_PA and also from custom generic service.
When I click on a button in the form, the data from SAP_PA is disappearing.
Error message 'Please enter Personnel Number' is displaying.
Please help me to resolve the issue.

Hi Aravind,
Thanks for your reply...
Data is from standard backend service which is independent of user events..
Data is displaying for the first time when form is dispalyed on the portal but when user clicks on any button, data is disappearing...
Can you tell us the patch level of the system required for ESS MSS ??
As of now our system patch level is 11,,
This might be a problem for data vanishing?

File Adapter: Initialization error: Conversion initialization failed

Hi all,
I'm trying to establish a file adapter (FTP, File Content Conversion).
In the adapter monitor I' ve got the following error:
Sender Adapter v1325 for Party '', Service 'BS_ACN_PCS_A':
Configured at 14:49:34 2005-08-29
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Format error in 'xml.recordset' argument: incomplete structure (name,number) pair
My content conversion parameters are:
BP_BusinessPartnerMasterData_IncomingData.fieldFixedLengths:
20,50,50,1,10,50,10,50,5,20,20,15,15
BP_BusinessPartnerMasterData_IncomingData.fieldNames: Number,Name2,Name1,Gender,Birthdate,City,Postcode,Street,
HouseNo,PhoneNumber,Fax,BankId,BankAccount
BP_BusinessPartnerMasterData_IncomingData.fieldContentFormating:
trim
BP_BusinessPartnerMasterData_IncomingData.keyFieldInStructure:
ignore
What could be the error or where I have to look for it?
Thanks,
Fabian

Yes,
Recordset name: BP_BusinessPartnerMasterData_IncomingData
Recordset structure: BP_BusinessPartnerMasterData_IncomingData
The corresponding Message Type:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://pcs.acn.com/basicdata" targetNamespace="http://pcs.acn.com/basicdata">
 <xsd:element name="BP_MasterDataIncomingFil" type="BP_BusinessPartnerMasterData_IncomingData" />
 <xsd:complexType name="BP_BusinessPartnerMasterData_IncomingData">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 f323a4b018a911da9fd9000bcd69ce64
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:sequence>
 <xsd:element name="Number">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8500fe111da89f2d1210a87220d
 </xsd:appinfo>
 <xsd:documentation xml:lang="EN">
 Id from Sender for BP
 </xsd:documentation>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="20" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="Name2">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8510fe111dacfd7d1210a87220d
 </xsd:appinfo>
 <xsd:documentation xml:lang="EN">
 Last name or Company name
 </xsd:documentation>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="50" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="Name1">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8520fe111da94bad1210a87220d
 </xsd:appinfo>
 <xsd:documentation xml:lang="EN">
 First name or Company name 2
 </xsd:documentation>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="50" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="Gender">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8530fe111da99add1210a87220d
 </xsd:appinfo>
 <xsd:documentation xml:lang="EN">
 m or f or blank
 </xsd:documentation>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="1" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="Birthdate">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8540fe111dab156d1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="10" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="City">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8550fe111daa58cd1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="50" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="Postcode">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8560fe111dac0c2d1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="10" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="Street">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8570fe111dabbd3d1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="50" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="HouseNo">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8580fe111dab63fd1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="5" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="PhoneNumber">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e8590fe111dac782d1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="20" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="Fax">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e85a0fe111daa9ebd1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="20" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="BankId">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e85b0fe111dace1ed1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="15" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 <xsd:element name="BankAccount">
 <xsd:annotation>
 <xsd:appinfo source="http://sap.com/xi/TextID">
 7679e85c0fe111da8801d1210a87220d
 </xsd:appinfo>
 </xsd:annotation>
 <xsd:simpleType>
 <xsd:restriction base="xsd:string">
 <xsd:maxLength value="15" />
 </xsd:restriction>
 </xsd:simpleType>
 </xsd:element>
 </xsd:sequence>
 </xsd:complexType>
</xsd:schema>

Field values directly binded to backend service are getting cleared.

Hi,
In HCM Forms & Process, for ex: in a form the header field values are directly binded to SAP_PA backend service and rest of the fields (dropdown list and free text fields) are getting from custom generic service. Now there is also a pushbutton in my form is used to calculate percentage of a field. Now when the form is displayed by default the header values are getting populated from SAP_PA backend service. When I click the push button with out selecting values(drop down list) getting from generic service all header field values are getting cleared. But if I select any dropdownlist value before selecting pushbutton and then if I click pushbutton all the header fields are retained with values. I am facing this problem for all the forms that I developed. I am looking for valuable answer.
Regards,
Nayani .

So you are or are not using a user event? Sounded like you were which was firing when the user selecpiushed the "button" for calculating fields. Whatever "event" you have tied that button too seems to be your culprit. Are you doing this calculation in Javascript off the button "onClick" even or passing it to a HCM P&F "user event" in the backend? If it is to a HCM P&F "user event", that's where I would make sure your fields are selected.
From the sounds of it, it seems when you do NOT select a dropdown list value, your generic service is not handling this gracefully and an error occurs. That would cause ALL other services NOT to run. It's an odd thing the framework does and often very frustrating to hunt down, but whenever any service errors, it will not run others.....hence no fields coming back correctly....even if those other services have NOTHING to do with yours (weird, I know).
Hope this helps.

Java error in session initialization Error - When calling IC Web client

Hi All,
When i access the CRM IC web client through browser (BSP page), Page is loading but inside the page im getting the following error.
" Java error in session initialization [Error message: abcj2systemid.domain.com: CALL_METHOD(SYS_METHODNAME) sessionid = SOAP Runtime Execption; CSoapExceptionTransport : HTTP recive failed with exception communication_failure ( Message Class CRMM_IC_FRAMEWORK- message number 106).
Pl suggest
Thanks
PRadeep

hi Indhra,
did you check, whether the services are active:
/Nsicf
/default_host/sap/bc/bsp/sap/
sam_sess_queue and sam_notifying
and the polling profile is defined with polling frequence:
/Nspro
->Interaction Center WebClient
->Basic Functions
->Define Context Area Profile
there "Define Polling Profile"
best wishes,
Hakan

Workflow Manager service in Error state after Dec14 CU install

After installing Dec 14 CU and updating the WF farm to CU2 I tried to run the cmdlets as per here -
https://technet.microsoft.com/en-us/library/dn133867.aspx?f=255&MSPPError=-2147217396
$credential = [System.Net.CredentialCache]::DefaultNetworkCredentials
$site = Get-SPSite https://teams.sharepoint.com
$proxy = Get-SPWorkflowServiceApplicationProxy
$svcAddress = $proxy.GetWorkflowServiceAddress($site)
Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credential $credential -Force $true
This errors:
Copy-SPActivitiesToWorkflowService : An internal error occured. For more details, please see the server logs. Client
ActivityId : cb2a40af-2c50-4e5c-8ac2-c5436c351b89.
At line:1 char:1
+ Copy-SPActivitiesToWorkflowService -WorkflowServiceAddress $svcAddress -Credenti ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 + CategoryInfo : InvalidData: (Microsoft.Share...WorkflowService:CopySPActivitiesToWorkflowService) [Copy
 -SPActivitiesToWorkflowService], InternalServerException
 + FullyQualifiedErrorId : Microsoft.SharePoint.WorkflowServices.PowerShell.CopySPActivitiesToWorkflowService
I then ran get-WFFarmstatus on the WF server (3 in the farm) and see that the service is stopped on all the WF servers with a warning:
WFserver1 WorkflowServiceBackend
Stopped
WARNING: Endpoint https://WFserver1:12290/ is not responding: The remote server returned anerror: (500) Internal Server Error.
WFserver1 WorkflowServiceFrontEnd
Stopped
Checked the underlying services and IIS on the 3 WF servers and these are all now started but the WF service cannot be started:
net start WorkflowServiceBackend
The Workflow Manager Backend service is starting.
The Workflow Manager Backend service could not be started.
A system error has occurred.
System error 1067 has occurred.
The process terminated unexpectedly.
The WF operational logs show this:
Unhandled exception in AppDomain:
Microsoft.Workflow.Common.FatalException: An unrecoverable error occurred. For
diagnostic purposes, this English message is associated with the failure: 'A
required Workflow Manager configuration
'WorkflowServiceScopeSnapshotProcessBatchSize' is not present. Please add this
configuration value.'. ---> System.IO.InvalidDataException: A required
Workflow Manager configuration 'WorkflowServiceScopeSnapshotProcessBatchSize'
is not present. Please add this configuration value. <o:p></o:p>
at
Microsoft.Workflow.Common.AsyncResult.End[TAsyncResult](IAsyncResult result) <o:p></o:p>
at
Microsoft.Workflow.Service.WorkflowServiceBackendHost.OnStartCompleted(IAsyncResult
result) <o:p></o:p>
There is a suggested fix for this here -
http://www.guideushow.com/sharepoint/solved-workflowservicescopesnapshotprocessbatchsize-is-not-present/
(http://www.guideushow.com/sharepoint/solved-workflowservicescopesnapshotprocessbatchsize-is-not-present/)
<o:p></o:p>
I’d like to at least get some feedback as to whether this is safe/supported (MS doesn’t like
any tinkering with the DBs…) – or whether we should go down the uninstall/reinstall
the Workflow farm route - thanks
J

Hi,
For your issue, try to provid EXECUTE permission for role "WFServiceOperators".
Add Workflow service account as “WFServiceOperators” into the database. Here are the steps to apply permissions:
Open the Query Window and Select the database “WFInstanceManagementDB”
Write the following line of script:
GRANT EXECUTE TO WFServiceoperators
Hit Execute.
Repeat the steps for database “WFResourceManagementDB”
Here are similar issue posts, you can use as a reference:
https://social.msdn.microsoft.com/Forums/office/en-US/351b72e1-1664-43c5-8c2b-ffb307bef38e/cant-access-workflow-status-page-after-workflow-manager-cu2?forum=sharepointadmin
https://social.msdn.microsoft.com/forums/azure/en-US/054d2a58-8847-4a6a-b1ab-05a79f49fe65/workflow-manager-cumulative-update-february-error?forum=wflmgr
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Workflow Manager Backend service fails to start - FatalException

Hi,
I installed Workflow Manager 1.0 (with default recommended configuration) and the Cummulative Update 1 and activated the feature on SharePoint 2013. I restarted my server.
The Workflow Manager Backend service cannot start. An attempt is done every 30" but it's always fails. The errors I see in the event viewer (every 30") are the following:
Error 1
Application: Microsoft.Workflow.ServiceHost.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: Microsoft.Workflow.Common.FatalException
Stack:
 at Microsoft.Workflow.Common.Fx+<>c__DisplayClass2.<FailFast>b__0()
 at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
 at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
 at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
 at System.Threading.ThreadHelper.ThreadStart()
Error 2
Faulting application name: Microsoft.Workflow.ServiceHost.exe, version: 1.0.20922.0, time stamp: 0x505e1b24
Faulting module name: KERNELBASE.dll, version: 6.2.9200.16451, time stamp: 0x50988aa6
Exception code: 0xe0434352
Fault offset: 0x000000000003811c
Faulting process id: 0x25c0
Faulting application start time: 0x01cefd844175ec32
Faulting application path: C:\Program Files\Workflow Manager\1.0\Workflow\Artifacts\Microsoft.Workflow.ServiceHost.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 7fb79f6a-6977-11e3-9401-0050569055b0
Faulting package full name:
Faulting package-relative application ID:
As a result I cannot deploy workflows on SharePoint using Visual Studio. I get a 500 error during activation of the related feature.
Any ideas?
Dimitris Papadimitriou, Software Development Professional

Hi,
I am not sure if you have solved this but it seems that the WF 1.1 Update requires some more updates in one of the tables in the configuration
database for the Workflow installation. Checkout the database [WFResourceManagementDB] and the table [WorkflowServiceConfig]. You need the flowing entries and values:
WorkflowServiceScopeSnapshotProcessBatchSize
20
WorkflowServiceScopeSnapshotProcessLoopInterval
00:05:00
WorkflowServiceSuspendedInstanceRetentionDuration
30.00:00:00
WorkflowServiceMaxInstanceCompressedSizeKB
5120
BR
Magnus Danielson

Invalid Web Service URL Error

I am trying to access define a new webservice system using the WSDL for my local queryview web service. When I put in the WSDL URL it comes back with a "Invalid Web Service URL" error. If I put the URL in the Browser address, it successfully brings back the web service information. Any ideas why I can't define this web service system?
http://<server>:8001/sap/bw/xml/soap/queryview?sap-client=040&wsdl=1.1
<server> is a token for posting concerns...
Thanks!

I am imagining that the BW QUERY_VIEW_DATA web service complies to the Basic Profile 1.0.
And I don't quite understand this part?
In addition, connections to Web services for SAP backend systems must be performed via logical destinations (configured in the SAP J2EE engine with the Visual Administrator) and not via portal systems
Since the QUERY_VIEW_DATA Web Service resides on my BW system is the BW system considered a SAP backend system? Any guidance is greatly appreciated.

NICI CCS: FATAL - Initialization error.

hi
poweredge 2950
raid 5 with 1 hot spare
5-750 gb drives
PERC 6/i
i get this error on logger screen
NICI CCS: FATAL - Initialization error.
Controlled Cryptography Services are not available.Setting _admin volume's
ID
won't see pool or volumes of server..
before this happen i was checking if AFP Protocols were active by using
another imanager on different server...
im looking at this TID
http://support.novell.com/docs/Tids/.../10065538.html
could this help me?
in the TID its netware 5 would it still work for netware 6.5

[email protected] wrote:
>im looking at this TID
>
>http://support.novell.com/docs/Tids/.../10065538.html
>
>could this help me?
No.
Your problem is that your SYS volume did not mount. The NICI error is only
a followup error of that problem. Your real problem is the lack of SYS
volume and you need to find out what went wrong. There are 3 things to do
to start investigating this problem:
1) This type of problem occurs at startup. So this implies that your
server was shut down at some point before. How did this shut down occur?
Did the server crash in any way, or was this a manual shutdown?
2) Check if the server actually sees your disks. For this, execute the
following console command and see if your disks are reported and show as
disks:
display storage adapters
3) Go to the server's logger screen and scroll back. Check what errors
occur earlier in the log. Especially look for problems while activating
pools or mounting volumes
Marcel Cox
http://support.novell.com/forums
Marcel Cox's Profile: http://forums.novell.com/member.php?userid=8

Workflow Manager Backend services starts and then immediately stops.

I cannot start the Workflow Manager Backend service. It starts and then immediately stops. The event log shows the error "Service cannot be started. System.Security.Crytography.CryptographicException: Keyset does not exist".
This problem may have started when the password for the account that the service runs under expired.
The Windows Fabric Host Service and the Service Bus Gateway and Service Bus Message Broker services are all running.
SJT00

I cannot start the Workflow Manager Backend service. It starts and then immediately stops. The event log shows the error "Service cannot be started. System.Security.Crytography.CryptographicException: Keyset does not exist".
This problem may have started when the password for the account that the service runs under expired.
The Windows Fabric Host Service and the Service Bus Gateway and Service Bus Message Broker services are all running.
SJT00

Backend Service Initialization Error in EP 7.0

Similar Messages

Maybe you are looking for