Backup location during Duplicate db

hi,
Is it possible to change the RMAN backup Location for the Auxillary db.
ie., say on my Target the bakup location is /u03/rman/backup
and on Auxillary host i copy the backup to /u01/rman backup
How to tell RMAN to look at different destination during DUPLICATE database.
also, I am NOT using recovery catalog.

OS? Database version? On 10g and higher use 'catalog backuppiece' to move the metadata information about backups to another location.
Werner

Similar Messages

  • Backup location during duplicate database

    On my production backup is taken in the path /u01/backup.
    I have copied the backup pieces to the location /u07/backup on the Auxiliary system.
    But how can i tell RMAN to look for the backups in the new location.
    I cant change the location of production using catalog command.
    ie.., /u07 is not available on PROD and /u01 is not available on dev.
    I want only the duplicate command to read the file from /u07/backup path

    Hi,
    You could make a link on the Auxiliary system (provided /u01/backup does not exists as a true directory).
    If it not already exists create a directory /u01 with the right owner and group.
    Than as the oracle user < ln -s /u07/backup /u01/backup >.
    Regards,
    Tycho

  • Backup location during update iOS5?

    Hello community.
    What a nightmare. Trying to update iOS5, keeps internal error, can't connect server error. After every time it fails, the long torturing backup starts again. When it gets through and starts to install, error 3004 and then nothing. Restart my iphone, itunes tells me it has to restore my iphone to factory setting before anything else can be done and wipes my iphone out. My music!!!!
    Does anybody know, where is that 10 minutes + backup during the iOS update is loacted in a Mac? I want to find it out and do something. Thanks!!!

    OS? Database version? On 10g and higher use 'catalog backuppiece' to move the metadata information about backups to another location.
    Werner

  • Duplicate target database for standby backup location.... errors out

    Hi ,
    i am getting below error while executing
    RMAN> duplicate target database for standby backup location '/rman1/perf/brmbkpdg' nofilenamecheck dorecover ;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "backup": expecting one of: "dorecover, db_file_name_convert, from, nofilenamecheck, ;, spfile"
    RMAN-01007: at line 1 column 39 file: standard input
    Can you please suggest a fix or what should be the syntax
    Thanks
    Naveen

    If it helps here are my tested commands: (Oracle 11)
    PRIMARY
    RMAN RUN {
    allocate channel d1 type disk;
    backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database;
    sql 'alter system archive log current';
    backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all;
    backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';
    release channel d1;
    STANDBY
    RMAN> run {
    allocate channel C1 device type disk;
    allocate auxiliary channel C2 device type disk;
    duplicate target database for standby nofilenamecheck;
    My how to notes are here :
    http://www.visi.com/~mseberg/duprman.html
    Please note these were written not to create but to recover a standby, you still have to set up forced logging and the net80 in advance.
    Best Regards
    mseberg

  • Restore controlfile from backup location

    Hi All,
    I have a RMAN backup and want to recover my data from backup. RMAN backup has taken by someone but during restore to another DB server I am confused at controlfile point. I can see two controlfile in RMAN backup. Do I need to add both controlfile in restore command or any one controlfile would be okay? Please suggest.
    I run below command - rman > restore control file from '<backup location>';
    Thanks...
    Edited by: user12115 on Jun 15, 2012 5:23 AM

    I have a RMAN backup and want to recover my data from backup. RMAN backup has taken by someone but during restore to another DB server I am confused at controlfile point. I can see two controlfile in RMAN backup. Do I need to add both controlfile in restore command or any one controlfile would be okay? Please suggest.
    I run below command - rman > restore control file from '<backup location>';In you log file one of backup set contains of data files another backup set contains Controlfile + SPFILE(optional)
    Or else you can check from source database
    RMAN> list backup of controlfile;
    Note that backup piece according to date, and you can use that piece name to restore controlfile.

  • Non-image files are not copied to the Backup Location

    I'm on Aperture 3.0.3... I just noticed that non-image files (e.g., WAV files) are not copied into the Backup Location, although they are copied into the main folder location during an import. Does anyone else see this behavior?

    Shawnsat,
    Yes you can still stream from the host computer, the knowledge base article that describes this is http://docs.info.apple.com/article.html?artnum=305098. If you are attempting to display Photos on Apple TV, they must be synced to the Apple TV, per knowledge base article http://docs.info.apple.com/article.html?artnum=305139.
    Cheers,
    John

  • When the archive disk group and RMAN backup location is full

    11.2.0.2 on Solaris 10
    2-Node RAC
    Sometimes I am faced with a situation where the disk group meant for storing archivelogs is full and the Disk based
    RMAN backup location is full as well. What would you do in such a situation ?
    This usually happens with our QA/UAT DBs during apps testing of certain type which causes huge amount of redo is generated.
    We don't directly backup to tape. The disk based backups are moved to tape every two weeks by our SysAdmin.

    Thank you Hemant, Tsharma, Asahideo
    If I have free space left in my local filesystem in any of the nodes in my 2-node RAC, I can run something like
    -- Untested
    BACKUP AS COMPRESSED BACKUPSET ARCHIVELOG ALL DELETE INPUT format '/localNode_pATH/ora_Arch%t_s%s_s%p';and later when the space is freed up in the original RMAN backup location , I can move it there and use CATALOG command to catalog this backup . Right ?

  • HT3275 When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option.  How do I change this?

    When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option.  How do I change this?  My external hard drive is a FreeAgent GoFlex Drive.

    Hi, what Format is the external Drive?
    They usually come PC Formatted for Fat32/MSdos, or NTFS... is there anything on it now?
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://Pondini.org/OSX/DU.html

  • How to change the line item storage location during the sales order creatio

    How to change the line item storage location during the sales order creatio

    Hi Kumar,
    I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
    Regards,
    Rachel

  • Multiple Backup Locations for Multiple Lightroom Databases

    I currently work with two lightroom databases but when I back up the databases, the backups get stored in the same Lightroom Backups folder. The two backups are stored in separate sub-folders but the actual database files have the same name. Thus, the only way to know which backup is for which database if to note the times that the backups were created and use this to determine which backup applies to which database.
    It would seem like the actual backup files could be named as per the associated database or the backup location could be specified for each database so that there is less chance for a mistake if a database needs to be restored.
    Thanks in advance,
    Dave Mayfield

    Thanks for your reply.
    I need the have each LOS ( Location of sale or location of delivery) of Business Partner because we will deliver items for the LOS and not for BP.
    As we also need to control (serial numbers) items & services ( field management) I also need to have the LOS as BP.
    As example:
    BP name AAA have 30 LOS.
    BP AAA bought 2000 items.
    BP AAA ask us to old theses items in warehouse.
    BP AAA request to delivery a x quantity in LOS 1, 2,3,4,...
    The invoice went to BP AAA, but the deliveries will be to each LOS of BP AAA.
    As I said we need to have the field services working side-by-side with serials numbers and services for each LOS of our BP AAA.
    So, we have subcustomers from big customer BP AAA.
    Do we have any way of having all subcustomers(LOS) as BP, along with the real customer AAA?
    Thanks in advance,

  • Can we use SSD in D13 VMs as a backup location

    Team,
    Any comment, as it is taking us 4-5 hours to take 80GB backup on storage space  on D13 VM. While looking to reduce this time, thought of using SSD as a backup location(underlying assumption that it has faster read/write speed although it is not recommended
    for keeping critical data).
    Any further suggestion on taking reducing the backup/restore time other than the compression feature
    Regards
    Gaurav
    gauravtyagi21

    Hi,
    Thanks for your post.
    The SSD drive (D:\) is not persistent, so its contents and permissions will be lost if the VM moves to a different host. This can happen in case of a host failure or a VM resize operation.
    Do not store your data or log files there. Use (persistent) drives from Azure Storage.
    If using TempDB and/or Buffer Pool Extensions, SQL Server requires accessing the directory specified to store them. The following section describes how to store SQL Server TempDB and/or Buffer Pool Extensions on the SSD drive and automatically recreate
    directory if the VM moves to a different host.
    You could refer to this article for more detail information:
    http://blogs.technet.com/b/dataplatforminsider/archive/2014/09/25/using-ssds-in-azure-vms-to-store-sql-server-tempdb-and-buffer-pool-extensions.aspx
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to change backup location in suspend mode?

    Hello
    I am trying to change the backup location in an image that is in suspend mode to different location into different deployment share.
    I have tried modifying varialbles.dat in Minint so it will reflect the new location in new deployment share, but it did not work.
    Thanks

    The variables.dat was my suggestion.
    I'm struggling to understand why you can't just restart the deployment.
    Blog: http://scriptimus.wordpress.com

  • Error while chaging backup location.

    By default rman use flash_recovery_area folder to save backup set. I give following command to save backup on different location. Now i want default location, for which i give second command, advise by srp on forum, i am getting error, although command is correct. What should i do now.
    CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '/u01/rman_bk_/rbackup_test_%t.%p.bak';
    RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT CLEAR ;  
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01009: syntax error: found "clear": expecting one of: "double-quoted-string, equal, single-quoted-string"
    RMAN-01007: at line 1 column 43 file: standard input

    Hi,
    Please update or mark the other thread also as answered.
    Backup location in RMAN
    Edited by: srp on Feb 6, 2012 1:15 PM

  • The backup location does specified does not contain any backup. Specify another backup location.

    We have our server set to backup to an internal HDD (E:), and then copy all the files in E: to different locations for storage (a NAS for instance).  I scheduled a copy to a USB drive, but I can't get the recovery wizard to see the backup it now contains. 
    I choose "A backup stored in another location" and then "Remote shared folder", as the USB (G:) does not show up in Local drives.  I now need to enter a UNC (it won't accept the "G:\" path), so I shared the USB drive and
    enter "\\SERVER\G\2014-09-23", which is the path to the parent of the WindowsImageBackup folder on the USB drive.  At this point I get the above error "The backup location does specified does not contain any backup"
    All the files look to have copied OK, and have the same Date Modified as on the server: as far as I can tell it's identical, and yet it won't mount. Help?

    Hi,
    I would like to confirm the exact backup process:
    When creating the backup, are you choosing "local drives" and then "G:", or Remote shared folder and then \\server\g\folder?
    If it is a network path, could you restore it with \\server\g\folder instead?
    If you have any feedback on our support, please send to [email protected]

  • Windows 7 backup - recurring message after changing backup location

    I backed up my Win7 Ult 64-bit pc using Windows backup to a location on my NAS ( \\NAS\Share Folder Old, say).
    Then I:
    - amended Windows backup to use a new location ( \\NAS\Share Folder New, say);
    - ran Windows 7 backup successfully (I think) to \\NAS\Share Folder New; and
    - deleted  \\NAS\Share Folder Old.
    Now, whenever I start my pc, I get a message that it cannot connect to \\NAS\Share Folder Old.
    No other program ever referred to \\NAS\Share Folder Old, it is not mapped to from my pc and it no longer appears (so far as I can see) anywhere in Windows Backup. 
    Can anyone suggest how I prevent Windows looking for \\NAS\Share Folder Old?
    Thanks,
    Alex

    Hi,
    Can you give us the full error message?
    Go to the following registry path:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsBackup\ScheduleParams\TargetDevice
    Check the PresentableName  value, confirm it is the new backup location.
    Alex Zhao
    TechNet Community Support

Maybe you are looking for