Bad Pool Caller and Bad Pool Header issue
Hi,I recently upgraded my system from Windows 8 to Windows 8.1. Since then it doesn,t start normally. Mainly give Blue screen with error Bad Pool caller, Bad pool header, Service Exception error, Driver corrupted expool. The system never hibernate or sleep. Please help.
Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that after upgrading to Windows 8.1 you are experiencing various BSOD errors. I am happy to assist with this. Did this start immediately after the upgrade to Windows 8.1, or was it shortly after? Checking online for those messages, I found suggestions about conflicting drivers, multiple antivirus programs in use. Here are a few examples I found from the Microsoft support forums. Something within may be of use to you. driver expool corrupted windows 8 - answers.microsoft.comBAD_POOL_CALLER error in Windows 8.1 - answers.microsoft.comsystem service exception error blue screen - answers.microsoft.com It may also be useful to open your own thread on the Microsoft Forums, as often the experts there are looking for dump files to look for specific causes. I hope this helps.
Similar Messages
-
I got my iPhone 5 back in February 2013 and for the most part of the year I enjoyed it. Then I started having issues with it. First of all the WiFi randomly quit working. I didn't even update it. So I tried updating it, resetting, and restoring it. While it was under warranty I tried getting the issue fixed, but Apple CS blew me off saying it was accidental damage and I should have gotten Apple Care. This time Verizon covered their *** and replaced the phone for me even though it was out of their 6 month warranty period. I think I posted this experience before.
Now my iPhone is acting up again. It first started freezing up during phone calls and now the head phone jack intermittently doesn't work. Again, resetting, restoring, and updating it did not fix these issues.
<Re-Titled By Host>The original issue they didn't state exactly why it was Accidental Damage. After running through some troubleshooting, they just stated it was Accidental Damage and that I should file a claim with my insurance, and that Apple Care would have covered it; then closed the request.
I've tried resetting settings, restoring it as new, and that was a no go. When it freezes up during calls I also have to perform a hard reset by pressing and holding both the power and the home buttons to get it functioning at all again(just completely freezes, won't respond to touch or home button.) I noticed that the proximity sensor isn't responding as well, so I have to tilt it away from my ear while in a call to keep from pressing the buttons on the touchscreen with the side of my face. I avoid phonecalls now, and text exclusively.
I don't live anywhere near a Genius Bar so I'm stuck with the online support to Apple. And since I don't have a landline, I get charged for their phone support so I tend not to use it.
Getting two lemons in a row seems coincidental so I'm wondering if it's a bad batch Verizon got then distributed out. -
Difference between Class Pool program and Interface Pool program
Both Class Pool program and an Interface Pool program indicate that the program contains interfaces that other programs can use globally. What exactly is the difference between them?
Transparent Table :
Exists with the same structure both in dictionary as well as in database exactly with the same data and fields.
" Pooled Table :
Pooled tables are logical tables that must be assigned to a table pool when they are defined. Pooled tables are used to store control data. Several pooled tables can be cominied in a table pool. The data of these pooled tables are then sorted in a common table in the database.
" Cluster Table :
Cluster tables are logical tables that must be assigned to a table cluster when they are defined. Cluster tables can be used to strore control data. They can also be used to store temporary data or texts, such as documentation.
" what is the major difference between Standard tables, Pooled tables and
" Clusterd Tables?
A transparent table is a table that stores data directly. You can read these tables directly on the database from outside SAP with for instance an SQL statement.
Transparent table is a one to one relation table i.e. when you create one transparent table then exactly same table will create in data base and if is basically used to store transaction data.
A clustered and a pooled table cannot be read from outside SAP because certain data are clustered and pooled in one field.
One of the possible reasons is for instance that their content can be variable in length and build up. Database manipulations in Abap are limited as well.
But pool and cluster table is a many to one relationship table. This means many pool table store in a database table which is know as table pool.
All the pool table stored table in table pool does not need to have any foreign key relationship but in the case of cluster table it is must. And pool and cluster table is basically use to store application data.
Table pool can contain 10 to 1000 small pool table which has 10 to 100 records. But cluster table can contain very big but few (1 to 10) cluster table.
For pool and cluster table you can create secondary index and you can use select distinct, group for pool and cluster table. You can use native SQL statement for pool and cluster table.
A structure is a table without data. It is only filled by program logic at the moment it is needed starting from tables.
A view is a way of looking at the contents of tables. It only contains the combination of the tables at the basis and the way the data needs to be represented. You actually call directly upon the underlying tables.
. Transparent tables (BKPF, VBAK, VBAP, KNA1, COEP)
Allows secondary indexes (SE11->Display Table->Indexes)
Can be buffered (SE11->Display Table->technical settings) Heavily updated tables should not be buffered.
II. Pool Tables (match codes, look up tables)
Should be accessed via primary key or
Should be buffered (SE11->Display Table->technical settings)
No secondary indexes
Select * is Ok because all columns retrieved anyway
III. Cluster Tables (BSEG,BSEC)
Should be accessed via primary key - very fast retrieval otherwise very slow
No secondary indexes
Select * is Ok because all columns retrieved anyway.
Performing an operation on multiple rows is more efficient than single row operations.
Therefore you still want to select into an internal table.
If many rows are being selected into the internal table,
you might still like to retrieve specific columns to cut down on the memory required.
Statistical SQL functions (SUM, AVG, MIN, MAX, etc) not supported
Can not be buffered
IV. Buffered Tables (includes both Transparent & Pool Tables)
While buffering database tables in program memory (SELECT into internal table) is generally a good idea for performance,
it is not always necessary.
Some tables are already buffered in memory.
These are mostly configuration tables.
If a table is already buffered, then a select statement against it is very fast.
To determine if a table is buffered, choose the 'technical settings' soft button from the data dictionary
display of a table (SE12). Pool tables should all be buffered.
More at this link.
http://help.sap.com/saphelp_erp2004/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
Transparent Table:
Exists with the same structure both in dictionary as well as in database exactly with the same data and fields.
Pooled Table:
Pooled tables are logical tables that must be assigned to a table pool when they are defined. Pooled tables are used to store control data. Several pooled tables can be cominied in a table pool. The data of these pooled tables are then sorted in a common table in the database.
Cluster Table:
Cluster tables are logical tables that must be assigned to a table cluster when they are defined. Cluster tables can be used to strore control data. They can also be used to store temporary data or texts, such as documentation.
A transparent table is a table that stores data directly. You can read these tables directly on the database from outside SAP with for instance an SQL statement.
Transparent table is a one to one relation table i.e. when you create one transparent table then exactly same table will create in data base and if is basically used to store transaction data.
A clustered and a pooled table cannot be read from outside SAP because certain data are clustered and pooled in one field.
One of the possible reasons is for instance that their content can be variable in length and build up. Database manipulations in Abap are limited as well.
But pool and cluster table is a many to one relationship table. This means many pool table store in a database table which is know as table pool.
All the pool table stored table in table pool does not need to have any foreign key relationship but in the case of cluster table it is must. And pool and cluster table is basically use to store application data.
Table pool can contain 10 to 1000 small pool table which has 10 to 100 records. But cluster table can contain very big but few (1 to 10) cluster table.
For pool and cluster table you can create secondary index and you can use select distinct, group for pool and cluster table. You can use native SQL statement for pool and cluster table.
A structure is a table without data. It is only filled by program logic at the moment it is needed starting from tables.
A view is a way of looking at the contents of tables. It only contains the combination of the tables at the basis and the way the data needs to be represented. You actually call directly upon the underlying tables.
http://www.datamanagementgroup.com/Resources/Articles/Article_0106_2.asp
more info
http://help.sap.com/saphelp_erp2004/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
http://cma.zdnet.com/book/abap/ch03/ch03.htm
Check this links.
http://help.sap.com/saphelp_40b/helpdata/en/4f/991f82446d11d189700000e8322d00/applet.htm
http://www.techinterviews.com/?p=198 -
I have alot drop calls and bad signal strength with my iphone 4, please help
I have alot of problems when I speak to all parties and the keep saying, are you there...are you there almost all the time, please help me
To solve this issue you must first find out if it's a carrier problem or device problem.
So what I suggest is that you try another sim card from another carrier, if you still have issue with the device than you can try a clean restore according to HT1414.
If that dont solve the problem contact apple support.
goodluck -
I have always had problems with my iPhone O2 network
It has always cut calls in the middle of conversations and reception has never being good
I spoke to O2 and have had new sim cards which have not helped
Any ideasGregMayne wrote:
i figure it is the logic board. and no it has never been changed. yes i have the box, the code. i keep everything for situations just like these and somehow they still try to **** me over.
Do this.
Go to the Apple Support page and type in your serial number. When the screen comes up showing that Serial number having Applecare extended warranty take a screen shot of it or Print it out to a PDF file and then Print a Hard Copy of either of those things. Take that with you when you take your Mac in to be looked at.
Good Luck with the Lenovo. I hear they are the same quality as when IBM was making them. Personally I have always used Dell Business Class notebooks and have never had any problems with them. Still have one that is going on 11 years old and it still runs as good as the day I bought it, actually a little better because I've upgrade the CPU, GPU. RAM and HDD. -
Bad internet service and bad landline
I am having horrible internet problems and landline issues. What can they do? They promised it would work had at Least 7 repair people here already? Why are they promising service when they can't keep it going?
nkasprzak wrote:
I am having horrible internet problems and landline issues. What can they do? They promised it would work had at Least 7 repair people here already? Why are they promising service when they can't keep it going?
Contact ATT Uverse Care on the link in my signature below.
Send them a Private Message, on this link, and they should be able to give the help needed to solve your Uverse Internet and POTS service problems. They are available M-F 8am-11pm Eastern time (also around on weekends), response may take up to 2 business days.
This is not the regular CS/TS phone people, but the social media Community Specialists that know the people to contact to get things done. I personally know as they've helped me on a DVR swap and gone above and beyond.
Include your name, account #, email address and a good phone # (land or cell) and time to contact you on.
Check the blue PM envelope, upper right on every page, for their reply. Good luck
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more -
3G video call and wifi open network issues
I have bought Lumia 920 few days back. I'm facing some issue with WiFi.when I'm connecting with WiFi open network, connection getting connected but web page is not opening, but in my previous Samsung mobile is getting connected and working ok. I don't know why Lumia 920 only making trouble and also one more thing there no 3G or 4G video calling option in the mobile. So could you please help me regarding this issues.
Are you having problems connecting to all wifi's or just this one? If just this one, you could try updating the router fimware.
Your Lumia supports video calling using Skype. -
I'm getting a Bad Pool Caller and Bad Pool Header errors upon startup.
I can't even get to the desktop or to Metro screen so I can't get any log or dump files.
It started after I accidentally installed an older version of Norton Utilities which had compatibility errors. The PC reset itself and came up with a Blue Screen error. saying
"Your PC ran into a problem and we need to restart, Just collection some data"
Each time it immediately restarts.
When I get to the Recovery screen I select advanced repair options, troubleshoot, Advanced Options, Startup options.
I've tried safe mode and but it just keeps repeating the same thing.
I also tried to Startup Repair but that failed too!
I would love to get in to uninstall Norton. Can you give me any advise.You should first make sure that there is the latest drivers installed from the manufacturer's website.
Have you chance to upload a memory dump to your SkyDrive drive that we can analyze what is going on? -
How to set the correct shared pool size and db_buffer_cache using awr
Hi All,
I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
Shared Pool Advisory
* SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
* Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
Shared Pool Size(M) SP Size Factr Est LC Size (M) Est LC Mem Obj Est LC Time Saved (s) Est LC Time Saved Factr Est LC Load Time (s) Est LC Load Time Factr Est LC Mem Obj Hits (K)
4,096 1.00 471 25,153 184,206 1.00 149 1.00 9,069
4,736 1.16 511 27,328 184,206 1.00 149 1.00 9,766
5,248 1.28 511 27,346 184,206 1.00 149 1.00 9,766
5,760 1.41 511 27,346 184,206 1.00 149 1.00 9,766
6,272 1.53 511 27,346 184,206 1.00 149 1.00 9,766
6,784 1.66 511 27,346 184,206 1.00 149 1.00 9,766
7,296 1.78 511 27,346 184,206 1.00 149 1.00 9,766
7,808 1.91 511 27,346 184,206 1.00 149 1.00 9,766
8,320 2.03 511 27,346 184,206 1.00 149 1.00 9,766
Buffer Pool Advisory
* Only rows with estimated physical reads >0 are displayed
* ordered by Block Size, Buffers For Estimate
P Size for Est (M) Size Factor Buffers (thousands) Est Phys Read Factor Estimated Phys Reads (thousands) Est Phys Read Time Est %DBtime for Rds
D 4,096 0.10 485 1.02 1,002 1 0.00
D 8,192 0.20 970 1.00 987 1 0.00
D 12,288 0.30 1,454 1.00 987 1 0.00
D 16,384 0.40 1,939 1.00 987 1 0.00
D 20,480 0.50 2,424 1.00 987 1 0.00
D 24,576 0.60 2,909 1.00 987 1 0.00
D 28,672 0.70 3,394 1.00 987 1 0.00
D 32,768 0.80 3,878 1.00 987 1 0.00
D 36,864 0.90 4,363 1.00 987 1 0.00
D 40,960 1.00 4,848 1.00 987 1 0.00
D 45,056 1.10 5,333 1.00 987 1 0.00
D 49,152 1.20 5,818 1.00 987 1 0.00
D 53,248 1.30 6,302 1.00 987 1 0.00
D 57,344 1.40 6,787 1.00 987 1 0.00
D 61,440 1.50 7,272 1.00 987 1 0.00
D 65,536 1.60 7,757 1.00 987 1 0.00
D 69,632 1.70 8,242 1.00 987 1 0.00
D 73,728 1.80 8,726 1.00 987 1 0.00
D 77,824 1.90 9,211 1.00 987 1 0.00
D 81,920 2.00 9,696 1.00 987 1 0.00
My shared pool size is 4gb and db_cache_size is 40Gb.
Please help me in configuring the correct size for this.
Thanks and Regards,Hi ,
Actually batch load is taking too much time.
Please find below the 1 hr awr report
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 6557 27-Nov-11 16:00:06 126 1.3
End Snap: 6558 27-Nov-11 17:00:17 130 1.6
Elapsed: 60.17 (mins)
DB Time: 34.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 40,960M 40,960M Std Block Size: 8K
Shared Pool Size: 4,096M 4,096M Log Buffer: 25,908K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.6 1.4 0.00 0.07
DB CPU(s): 0.5 1.2 0.00 0.06
Redo size: 281,296.9 698,483.4
Logical reads: 20,545.6 51,016.4
Block changes: 1,879.5 4,667.0
Physical reads: 123.7 307.2
Physical writes: 66.4 164.8
User calls: 8.2 20.4
Parses: 309.4 768.4
Hard parses: 8.5 21.2
W/A MB processed: 1.7 4.3
Logons: 0.7 1.6
Executes: 1,235.9 3,068.7
Rollbacks: 0.0 0.0
Transactions: 0.4
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.66 In-memory Sort %: 100.00
Library Hit %: 99.19 Soft Parse %: 97.25
Execute to Parse %: 74.96 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 92.41 % Non-Parse CPU: 98.65
Shared Pool Statistics
Begin End
Memory Usage %: 80.33 82.01
% SQL with executions>1: 90.90 86.48
% Memory for SQL w/exec>1: 90.10 86.89
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 1,789 87.72
db file sequential read 27,531 50 2 2.45 User I/O
db file scattered read 26,322 30 1 1.47 User I/O
row cache lock 1,798 20 11 0.96 Concurrency
OJVM: Generic 36 15 421 0.74 Other
Host CPU (CPUs: 24 Cores: 12 Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
0.58 1.50 2.8 0.7 0.1 96.6
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
2.2 63.6 0.0
Memory Statistics
Begin End
Host Mem (MB): 131,072.0 131,072.0
SGA use (MB): 50,971.4 50,971.4
PGA use (MB): 545.5 1,066.3
% Host Mem used for SGA+PGA: 39.30 39.70
RAC Statistics
Begin End
Number of Instances: 2 2
Global Cache Load Profile
Per Second Per Transaction
Global Cache blocks received: 3.09 7.68
Global Cache blocks served: 1.86 4.62
GCS/GES messages received: 78.64 195.27
GCS/GES messages sent: 53.82 133.65
DBWR Fusion writes: 0.52 1.30
Estd Interconnect traffic (KB) 65.50
Global Cache Efficiency Percentages (Target local+remote 100%)
Buffer access - local cache %: 99.65
Buffer access - remote cache %: 0.02
Buffer access - disk %: 0.34
Global Cache and Enqueue Services - Workload Characteristics
Avg global enqueue get time (ms): 0.0
Avg global cache cr block receive time (ms): 1.7
Avg global cache current block receive time (ms): 1.0
Avg global cache cr block build time (ms): 0.0
Avg global cache cr block send time (ms): 0.0
Global cache log flushes for cr blocks served %: 1.4
Avg global cache cr block flush time (ms): 0.9
Avg global cache current block pin time (ms): 0.0
Avg global cache current block send time (ms): 0.0
Global cache log flushes for current blocks served %: 0.1
Avg global cache current block flush time (ms): 0.0
Global Cache and Enqueue Services - Messaging Statistics
Avg message sent queue time (ms): 0.0
Avg message sent queue time on ksxp (ms): 0.4
Avg message received queue time (ms): 0.5
Avg GCS message process time (ms): 0.0
Avg GES message process time (ms): 0.0
% of direct sent messages: 79.13
% of indirect sent messages: 17.10
% of flow controlled messages: 3.77
Cluster Interconnect
Begin End
Interface IP Address Pub Source IP Pub Src
en9 10.51.10.61 N Oracle Cluster Repository
Main Report
* Report Summary
* Wait Events Statistics
* SQL Statistics
* Instance Activity Statistics
* IO Stats
* Buffer Pool Statistics
* Advisory Statistics
* Wait Statistics
* Undo Statistics
* Latch Statistics
* Segment Statistics
* Dictionary Cache Statistics
* Library Cache Statistics
* Memory Statistics
* Streams Statistics
* Resource Limit Statistics
* Shared Server Statistics
* init.ora Parameters
More RAC Statistics
* RAC Report Summary
* Global Messaging Statistics
* Global CR Served Stats
* Global CURRENT Served Stats
* Global Cache Transfer Stats
* Interconnect Stats
* Dynamic Remastering Statistics
Back to Top
Statistic Name Time (s) % of DB Time
sql execute elapsed time 1,925.20 94.38
DB CPU 1,789.38 87.72
connection management call elapsed time 99.65 4.89
PL/SQL execution elapsed time 89.81 4.40
parse time elapsed 46.32 2.27
hard parse elapsed time 25.01 1.23
Java execution elapsed time 21.24 1.04
PL/SQL compilation elapsed time 11.92 0.58
failed parse elapsed time 9.37 0.46
hard parse (sharing criteria) elapsed time 8.71 0.43
sequence load elapsed time 0.06 0.00
repeated bind elapsed time 0.02 0.00
hard parse (bind mismatch) elapsed time 0.01 0.00
DB time 2,039.77
background elapsed time 122.00
background cpu time 113.42
Statistic Value End Value
NUM_LCPUS 0
NUM_VCPUS 0
AVG_BUSY_TIME 12,339
AVG_IDLE_TIME 348,838
AVG_IOWAIT_TIME 221
AVG_SYS_TIME 2,274
AVG_USER_TIME 9,944
BUSY_TIME 299,090
IDLE_TIME 8,375,051
IOWAIT_TIME 6,820
SYS_TIME 57,512
USER_TIME 241,578
LOAD 1 2
OS_CPU_WAIT_TIME 312,200
PHYSICAL_MEMORY_BYTES 137,438,953,472
NUM_CPUS 24
NUM_CPU_CORES 12
GLOBAL_RECEIVE_SIZE_MAX 1,310,720
GLOBAL_SEND_SIZE_MAX 1,310,720
TCP_RECEIVE_SIZE_DEFAULT 16,384
TCP_RECEIVE_SIZE_MAX 9,223,372,036,854,775,807
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 9,223,372,036,854,775,807
TCP_SEND_SIZE_MIN 4,096
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
Snap Time Load %busy %user %sys %idle %iowait
27-Nov 16:00:06 0.58
27-Nov 17:00:17 1.50 3.45 2.79 0.66 96.55 0.08
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
* s - second, ms - millisecond - 1000th of a second
* ordered by wait time desc, waits desc
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
* Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
* Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 1,789 87.72
User I/O 61,229 0 92 1 4.49
Other 102,743 40 31 0 1.50
Concurrency 3,169 10 24 7 1.16
Cluster 58,920 0 11 0 0.52
System I/O 45,407 0 6 0 0.29
Configuration 107 7 1 5 0.03
Commit 383 0 0 1 0.01
Network 15,275 0 0 0 0.00
Application 52 8 0 0 0.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
* s - second, ms - millisecond - 1000th of a second
* Only events with Total Wait Time (s) >= .001 are shown
* ordered by wait time desc, waits desc (idle events last)
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % DB time
db file sequential read 27,531 0 50 2 18.93 2.45
db file scattered read 26,322 0 30 1 18.10 1.47
row cache lock 1,798 0 20 11 1.24 0.96
OJVM: Generic 36 42 15 421 0.02 0.74
db file parallel read 394 0 7 19 0.27 0.36
control file sequential read 22,248 0 6 0 15.30 0.28
reliable message 4,439 0 4 1 3.05 0.18
gc current grant busy 7,597 0 3 0 5.22 0.16
PX Deq: Slave Session Stats 2,661 0 3 1 1.83 0.16
DFS lock handle 3,208 0 3 1 2.21 0.16
direct path write temp 4,842 0 3 1 3.33 0.15
library cache load lock 39 0 3 72 0.03 0.14
gc cr multi block request 37,008 0 3 0 25.45 0.14
IPC send completion sync 5,451 0 2 0 3.75 0.10
gc cr block 2-way 4,669 0 2 0 3.21 0.09
enq: PS - contention 3,183 33 1 0 2.19 0.06
gc cr grant 2-way 5,151 0 1 0 3.54 0.06
direct path read temp 1,722 0 1 1 1.18 0.05
gc current block 2-way 1,807 0 1 0 1.24 0.03
os thread startup 6 0 1 108 0.00 0.03
name-service call wait 12 0 1 47 0.01 0.03
PX Deq: Signal ACK RSG 2,046 50 0 0 1.41 0.02
log file switch completion 3 0 0 149 0.00 0.02
rdbms ipc reply 3,610 0 0 0 2.48 0.02
gc current grant 2-way 1,432 0 0 0 0.98 0.02
library cache pin 903 32 0 0 0.62 0.02
PX Deq: reap credit 35,815 100 0 0 24.63 0.01
log file sync 383 0 0 1 0.26 0.01
Disk file operations I/O 405 0 0 0 0.28 0.01
library cache lock 418 3 0 0 0.29 0.01
kfk: async disk IO 23,159 0 0 0 15.93 0.01
gc current block busy 4 0 0 35 0.00 0.01
gc current multi block request 1,206 0 0 0 0.83 0.01
ges message buffer allocation 38,526 0 0 0 26.50 0.00
enq: FB - contention 131 0 0 0 0.09 0.00
undo segment extension 8 100 0 6 0.01 0.00
CSS initialization 8 0 0 6 0.01 0.00
SQL*Net message to client 14,600 0 0 0 10.04 0.00
enq: HW - contention 96 0 0 0 0.07 0.00
CSS operation: action 8 0 0 4 0.01 0.00
gc cr block busy 33 0 0 1 0.02 0.00
latch free 30 0 0 1 0.02 0.00
enq: TM - contention 49 6 0 0 0.03 0.00
enq: JQ - contention 19 100 0 1 0.01 0.00
SQL*Net more data to client 666 0 0 0 0.46 0.00
asynch descriptor resize 3,179 100 0 0 2.19 0.00
latch: shared pool 3 0 0 3 0.00 0.00
CSS operation: query 24 0 0 0 0.02 0.00
PX Deq: Signal ACK EXT 72 0 0 0 0.05 0.00
KJC: Wait for msg sends to complete 269 0 0 0 0.19 0.00
latch: object queue header operation 4 0 0 1 0.00 0.00
gc cr block congested 5 0 0 0 0.00 0.00
utl_file I/O 11 0 0 0 0.01 0.00
enq: TO - contention 3 33 0 0 0.00 0.00
SQL*Net message from client 14,600 0 219,478 15033 10.04
jobq slave wait 7,726 100 3,856 499 5.31
PX Deq: Execution Msg 10,556 19 50 5 7.26
PX Deq: Execute Reply 2,946 31 27 9 2.03
PX Deq: Parse Reply 3,157 35 3 1 2.17
PX Deq: Join ACK 2,976 28 2 1 2.05
PX Deq Credit: send blkd 7 14 0 4 0.00
Back to Wait Events Statistics
Back to Top
Background Wait Events
* ordered by wait time desc, waits desc (idle events last)
* Only events with Total Wait Time (s) >= .001 are shown
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % bg time
os thread startup 140 0 13 90 0.10 10.35
db file parallel write 8,233 0 6 1 5.66 5.08
log file parallel write 3,906 0 6 1 2.69 4.62
log file sequential read 350 0 5 16 0.24 4.49
control file sequential read 13,737 0 5 0 9.45 3.72
DFS lock handle 2,990 27 2 1 2.06 1.43
db file sequential read 921 0 2 2 0.63 1.39
SQL*Net break/reset to client 18 0 1 81 0.01 1.19
control file parallel write 2,455 0 1 1 1.69 1.12
ges lms sync during dynamic remastering and reconfig 24 100 1 50 0.02 0.98
library cache load lock 35 0 1 24 0.02 0.68
ASM file metadata operation 3,483 0 1 0 2.40 0.65
enq: CO - master slave det 1,203 100 1 0 0.83 0.46
kjbdrmcvtq lmon drm quiesce: ping completion 9 0 1 62 0.01 0.46
enq: WF - contention 11 0 0 35 0.01 0.31
CGS wait for IPC msg 32,702 100 0 0 22.49 0.19
gc object scan 28,788 100 0 0 19.80 0.15
row cache lock 535 0 0 0 0.37 0.14
library cache pin 370 55 0 0 0.25 0.12
ksxr poll remote instances 19,119 100 0 0 13.15 0.11
name-service call wait 6 0 0 19 0.00 0.10
gc current block 2-way 304 0 0 0 0.21 0.09
gc cr block 2-way 267 0 0 0 0.18 0.08
gc cr grant 2-way 355 0 0 0 0.24 0.08
ges LMON to get to FTDONE 3 100 0 24 0.00 0.06
enq: CF - contention 145 76 0 0 0.10 0.05
PX Deq: reap credit 8,842 100 0 0 6.08 0.05
reliable message 126 0 0 0 0.09 0.05
db file scattered read 19 0 0 3 0.01 0.05
library cache lock 162 1 0 0 0.11 0.04
latch: shared pool 2 0 0 27 0.00 0.04
Disk file operations I/O 504 0 0 0 0.35 0.04
gc current grant busy 148 0 0 0 0.10 0.04
gcs log flush sync 84 0 0 1 0.06 0.04
ges message buffer allocation 24,934 0 0 0 17.15 0.02
enq: CR - block range reuse ckpt 83 0 0 0 0.06 0.02
latch free 22 0 0 1 0.02 0.02
CSS operation: action 13 0 0 2 0.01 0.02
CSS initialization 4 0 0 6 0.00 0.02
direct path read 1 0 0 21 0.00 0.02
rdbms ipc reply 153 0 0 0 0.11 0.01
db file parallel read 2 0 0 8 0.00 0.01
direct path write 5 0 0 3 0.00 0.01
gc current multi block request 49 0 0 0 0.03 0.01
gc current block busy 5 0 0 2 0.00 0.01
enq: PS - contention 24 50 0 0 0.02 0.01
gc cr multi block request 54 0 0 0 0.04 0.01
ges generic event 1 100 0 10 0.00 0.01
gc current grant 2-way 35 0 0 0 0.02 0.01
kfk: async disk IO 183 0 0 0 0.13 0.01
Log archive I/O 3 0 0 2 0.00 0.01
gc buffer busy acquire 2 0 0 3 0.00 0.00
LGWR wait for redo copy 123 0 0 0 0.08 0.00
IPC send completion sync 18 0 0 0 0.01 0.00
enq: TA - contention 11 0 0 0 0.01 0.00
read by other session 2 0 0 2 0.00 0.00
enq: TM - contention 9 89 0 0 0.01 0.00
latch: ges resource hash list 135 0 0 0 0.09 0.00
PX Deq: Slave Session Stats 12 0 0 0 0.01 0.00
KJC: Wait for msg sends to complete 89 0 0 0 0.06 0.00
enq: TD - KTF dump entries 8 0 0 0 0.01 0.00
enq: US - contention 7 0 0 0 0.00 0.00
CSS operation: query 12 0 0 0 0.01 0.00
enq: TK - Auto Task Serialization 6 100 0 0 0.00 0.00
PX Deq: Signal ACK RSG 24 50 0 0 0.02 0.00
log file single write 6 0 0 0 0.00 0.00
enq: WL - contention 2 100 0 1 0.00 0.00
ADR block file read 13 0 0 0 0.01 0.00
ADR block file write 5 0 0 0 0.00 0.00
latch: object queue header operation 1 0 0 1 0.00 0.00
gc cr block busy 1 0 0 1 0.00 0.00
rdbms ipc message 103,276 67 126,259 1223 71.03
PX Idle Wait 6,467 67 12,719 1967 4.45
wait for unread message on broadcast channel 7,240 100 7,221 997 4.98
gcs remote message 218,809 84 7,213 33 150.49
DIAG idle wait 203,228 95 7,185 35 139.77
shared server idle wait 121 100 3,630 30000 0.08
ASM background timer 3,343 0 3,611 1080 2.30
Space Manager: slave idle wait 723 100 3,610 4993 0.50
heartbeat monitor sleep 722 100 3,610 5000 0.50
ges remote message 73,089 52 3,609 49 50.27
dispatcher timer 66 88 3,608 54660 0.05
pmon timer 1,474 82 3,607 2447 1.01
PING 1,487 19 3,607 2426 1.02
Streams AQ: qmn slave idle wait 125 0 3,594 28754 0.09
Streams AQ: qmn coordinator idle wait 250 50 3,594 14377 0.17
smon timer 18 50 3,505 194740 0.01
JOX Jit Process Sleep 73 100 976 13370 0.05
class slave wait 56 0 605 10806 0.04
KSV master wait 2,215 98 1 0 1.52
SQL*Net message from client 109 0 0 2 0.07
PX Deq: Parse Reply 27 44 0 1 0.02
PX Deq: Join ACK 30 40 0 1 0.02
PX Deq: Execute Reply 20 30 0 0 0.01
Streams AQ: RAC qmn coordinator idle wait 259 100 0 0 0.18
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
* % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
* Ordered by Event (idle events last)
% of Waits
Event Total Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 13 100.0
ADR block file write 5 100.0
ADR file lock 6 100.0
ARCH wait for archivelog lock 3 100.0
ASM file metadata operation 3483 99.6 .1 .1 .2
CGS wait for IPC msg 32.7K 100.0
CSS initialization 12 50.0 50.0
CSS operation: action 21 28.6 9.5 61.9
CSS operation: query 36 86.1 5.6 8.3
DFS lock handle 6198 98.6 1.2 .1 .1
Disk file operations I/O 909 95.7 3.6 .7
IPC send completion sync 5469 99.9 .1 .0 .0
KJC: Wait for msg sends to complete 313 100.0
LGWR wait for redo copy 122 100.0
Log archive I/O 3 66.7 33.3
OJVM: Generic 36 55.6 44.4
PX Deq: Signal ACK EXT 72 98.6 1.4
PX Deq: Signal ACK RSG 2070 99.7 .0 .1 .0 .1
PX Deq: Slave Session Stats 2673 99.7 .2 .1 .0
PX Deq: reap credit 44.7K 100.0
SQL*Net break/reset to client 20 95.0 5.0
SQL*Net message to client 14.7K 100.0
SQL*Net more data from client 32 100.0
SQL*Net more data to client 689 100.0
asynch descriptor resize 3387 100.0
buffer busy waits 2 100.0
control file parallel write 2455 96.6 2.2 .6 .6 .1
control file sequential read 36K 99.4 .3 .1 .1 .1 .1 .0
db file parallel read 397 8.8 .8 5.5 12.6 17.4 46.3 8.6
db file parallel write 8233 85.4 10.3 2.3 1.4 .4 .1
db file scattered read 26.3K 79.2 1.5 8.2 10.5 .6 .1 .0
db file sequential read 28.4K 60.2 3.3 18.0 18.1 .3 .1 .0
db file single write 2 100.0
direct path read 2 50.0 50.0
direct path read temp 1722 95.8 2.8 .1 .5 .8 .1
direct path write 6 83.3 16.7
direct path write temp 4842 96.3 2.7 .5 .2 .0 .0 .2
enq: AF - task serialization 1 100.0
enq: CF - contention 145 99.3 .7
enq: CO - master slave det 1203 98.9 .8 .2
enq: CR - block range reuse ckpt 83 100.0
enq: DR - contention 2 100.0
enq: FB - contention 131 100.0
enq: HW - contention 97 100.0
enq: JQ - contention 19 89.5 10.5
enq: JS - job run lock - synchronize 3 100.0
enq: MD - contention 1 100.0
enq: MW - contention 2 100.0
enq: PS - contention 3207 99.5 .4 .1
enq: TA - contention 11 100.0
enq: TD - KTF dump entries 8 100.0
enq: TK - Auto Task Serialization 6 100.0
enq: TM - contention 58 100.0
enq: TO - contention 3 100.0
enq: TQ - DDL contention 1 100.0
enq: TS - contention 1 100.0
enq: UL - contention 1 100.0
enq: US - contention 7 100.0
enq: WF - contention 11 81.8 18.2
enq: WL - contention 2 50.0 50.0
gc buffer busy acquire 2 50.0 50.0
gc cr block 2-way 4934 99.9 .1 .0 .0
gc cr block busy 35 68.6 31.4
gc cr block congested 6 100.0
gc cr disk read 2 100.0
gc cr grant 2-way 4824 100.0 .0
gc cr grant congested 2 100.0
gc cr multi block request 37.1K 99.8 .2 .0 .0 .0 .0 .0
gc current block 2-way 2134 99.9 .0 .0
gc current block busy 7 14.3 14.3 14.3 28.6 28.6
gc current block congested 2 100.0
gc current grant 2-way 1337 99.9 .1
gc current grant busy 7123 99.2 .2 .2 .0 .0 .3 .1
gc current grant congested 2 100.0
gc current multi block request 1260 99.8 .2
gc object scan 28.8K 100.0
gcs log flush sync 65 95.4 3.1 1.5
ges LMON to get to FTDONE 3 100.0
ges generic event 1 100.0
ges inquiry response 2 100.0
ges lms sync during dynamic remastering and reconfig 24 16.7 29.2 54.2
ges message buffer allocation 63.1K 100.0
kfk: async disk IO 23.3K 100.0 .0 .0
kjbdrmcvtq lmon drm quiesce: ping completion 9 11.1 88.9
ksxr poll remote instances 19.1K 100.0
latch free 52 59.6 40.4
latch: call allocation 2 100.0
latch: gc element 1 100.0
latch: gcs resource hash 1 100.0
latch: ges resource hash list 135 100.0
latch: object queue header operation 5 40.0 40.0 20.0
latch: shared pool 5 40.0 20.0 20.0 20.0
library cache load lock 74 9.5 5.4 8.1 17.6 10.8 13.5 35.1
library cache lock 493 99.2 .4 .4
library cache pin 1186 98.4 .3 1.2 .1
library cache: mutex X 6 100.0
log file parallel write 3897 72.9 1.5 17.1 7.5 .6 .3 .1
log file sequential read 350 4.6 3.1 59.4 30.0 2.9
log file single write 6 100.0
log file switch completion 3 33.3 66.7
log file sync 385 90.4 3.6 4.7 .8 .5
name-service call wait 18 5.6 5.6 5.6 16.7 44.4 22.2
os thread startup 146 100.0
rdbms ipc reply 3763 99.7 .3
read by other session 2 50.0 50.0
reliable message 4565 99.7 .2 .0 .0 .1
row cache lock 2334 99.3 .2 .1 .1 .3
undo segment extension 8 50.0 37.5 12.5
utl_file I/O 11 100.0
ASM background timer 3343 57.0 .3 .1 .1 .1 21.1 21.4
DIAG idle wait 203.2K 3.4 .2 .4 18.0 41.4 14.8 21.8
JOX Jit Process Sleep 73 2.7 97.3
KSV master wait 2213 99.4 .1 .2 .3
PING 1487 81.0 19.0
PX Deq Credit: send blkd 7 57.1 14.3 14.3 14.3
PX Deq: Execute Reply 2966 59.8 .8 9.5 5.6 10.2 2.6 11.4
PX Deq: Execution Msg 10.6K 72.4 12.1 2.6 2.5 .1 5.6 4.6 .0
PX Deq: Join ACK 3006 77.9 22.1 .1
PX Deq: Parse Reply 3184 67.1 31.1 1.6 .2
PX Idle Wait 6466 .2 8.7 4.3 4.8 .3 .1 5.0 76.6
SQL*Net message from client 14.7K 72.4 2.8 .8 .5 .9 .4 2.8 19.3
Space Manager: slave idle wait 722 100.0
Streams AQ: RAC qmn coordinator idle wait 259 100.0
Streams AQ: qmn coordinator idle wait 250 50.0 50.0
Streams AQ: qmn slave idle wait 125 100.0
class slave wait 55 67.3 7.3 1.8 5.5 1.8 7.3 9.1
dispatcher timer 66 6.1 93.9
gcs remote message 218.6K 7.7 1.8 1.2 1.6 1.7 15.7 70.3
ges remote message 72.9K 29.7 5.1 2.7 2.2 1.5 4.0 54.7
heartbeat monitor sleep 722 100.0
jobq slave wait 7725 .1 .0 99.9
pmon timer 1474 18.4 81.6
rdbms ipc message 103.3K 20.7 2.7 1.5 1.3 .9 .7 40.7 31.6
shared server idle wait 121 100.0
smon timer 18 100.0
wait for unread message on broadcast channel 7238 .3 99.7
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 64ms to 2s <32ms <64ms <1/8s <1/4s <1/2s <1s <2s >=2s
ASM file metadata operation 6 99.8 .1 .1
DFS lock handle 6 99.9 .1 .0
OJVM: Generic 16 55.6 2.8 41.7
PX Deq: Signal ACK RSG 3 99.9 .0 .1
PX Deq: Slave Session Stats 3 99.9 .0 .0 .0
SQL*Net break/reset to client 1 95.0 5.0
control file sequential read 1 100.0 .0
db file parallel read 34 91.4 8.6
db file scattered read 4 100.0 .0 .0
db file sequential read 6 100.0 .0 .0 .0
direct path write temp 11 99.8 .1 .1 .0
enq: WF - contention 2 81.8 18.2
gc cr block 2-way 1 100.0 .0
gc cr multi block request 1 100.0 .0
gc current block 2-way 1 100.0 .0
gc current block busy 2 71.4 28.6
gc current grant busy 8 99.9 .0 .1
ges lms sync during dynamic remastering and reconfig 13 45.8 20.8 33.3
kjbdrmcvtq lmon drm quiesce: ping completion 8 11.1 11.1 77.8
latch: shared pool 1 80.0 20.0
library cache load lock 26 64.9 14.9 12.2 4.1 4.1
log file parallel write 2 99.9 .0 .0
log file sequential read 10 97.1 2.0 .6 .3
log file switch completion 2 33.3 66.7
name-service call wait 4 77.8 22.2
os thread startup 146 100.0
reliable message 4 99.9 .0 .1
row cache lock 2 99.7 .0 .0 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 4s to 2m <2s <4s <8s <16s <32s < 1m < 2m >=2m
row cache lock 6 99.7 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
* ordered by DB Time
Service Name DB Time (s) DB CPU (s) Physical Reads (K) Logical Reads (K)
ubshost 1,934 1,744 445 73,633
SYS$USERS 105 45 1 404
SYS$BACKGROUND 0 0 1 128
ubshostXDB 0 0 0 0
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
* Wait Class info for services in the Service Statistics section.
* Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
* Time Waited (Wt Time) in seconds
Service Name User I/O Total Wts User I/O Wt Time Concurcy Total Wts Concurcy Wt Time Admin Total Wts Admin Wt Time Network Total Wts Network Wt Time
ubshost 60232 90 2644 4 0 0 13302 0
SYS$USERS 997 2 525 19 0 0 1973 0
SYS$BACKGROUND 1456 2 1258 14 0 0 0 0
I am not able to paste the whole awr report. I have paste some of the sections of awr report.
Please help.
Thanks and Regards, -
BSOD with both Kernal Security Check Error and Bad Pool Header.
All -
I have a HP DV7 laptop with Windows 8.1. It has BSOD with both Kernal Security Check Error and Bad Pool Header.
Despite doing all the built in HP tests, there is nothing. Using an Anker HardDrive Dock results in the identical errors on another machine.
Bottom line, even if I could see the DMP files (which I cannot); because the machine fails to boot, there are no files to be copied.
I have tried various AIO and UEFI disks and USB, and the laptop NEVER accepts the PREINSTALL environment. Being unable to use the Anker has never happened. I seem completely locked out of the drive. Any suggestions? Thx.
Bruce A AdesHi Texas_Bruiser
Some required details are needed for us to help you.
Ensure that the BIOS/UEFI has been configured to allow boot from DVD/CD or USB.
When you attempted to boot into PREINSTALL environment (PE) by using disks or USB, we need more details about error message or what happened?
If your computer cannot even boot into Windows PE by using installation media, we suggest you check if memory and other hardware are works properly on this computer. Also try to plug this hard disk on other computer as data volume, see if the hard disk works.
Regards
D. Wu -
How to solve Bad Pool Caller issue (Windows 8.1)
I have encountered blue screen Bad Pool Caller error on my Windows 8.1 today. It happened a couple times today. I don't know why this happen.
Here is my dumps file of skydrive link.
https://skydrive.live.com/redir?resid=72664CEADF63A3F5%211215
Thanks a lot!RW
It is never a good idea to have more than one active malware application as it leads to all sorts of instability and crashing. This is your problem. You have Kaspersky (in my opinion a leading cause of these) and Symantec (also a huge contributor)
I would remove them both and use the built in defender of some other malware application.
I would remove Kaspersky and use the built in defender.
Kaspersky is a frequent cause of BSOD's.
http://support.kaspersky.com/downloads/utils/kavremover10.zip
Symantec is a frequent cause of BSOD's.
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
Debug session time: Thu Feb 6 18:43:59.993 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-41875-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 0:22:40.705
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 1e0, ffffe00001527878}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 00000000000001e0, Memory contents of the pool block
Arg4: ffffe00001527878, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 18:20:37.094 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-46765-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 0:39:00.806
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 0, ffffe0000c3c51c8}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000000000000, Memory contents of the pool block
Arg4: ffffe0000c3c51c8, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 17:26:36.420 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-61921-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 1:58:33.132
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
*** WARNING: Unable to verify timestamp for klflt.sys
*** ERROR: Module load completed but symbols could not be loaded for klflt.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 3, ffffe000010880d8}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000000000003, Memory contents of the pool block
Arg4: ffffe000010880d8, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 15:27:20.675 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-63265-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 3 days 22:11:14.531
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 8a2baf8, ffffe00008a2bb88}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000008a2baf8, Memory contents of the pool block
Arg4: ffffe00008a2bb88, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
Wanikiya and Dyami--Team Zigzag -
Bad Pool Caller - Blue Screen of Death
Windows Blue Screens of Death (BSoDs) happen whenever your computer encounters something it doesn’t know how to process, so it shuts itself down to prevent any damage. Sometimes BSoDs happen once and you don’t see them again when you restart — however, this isnt always the case and a BSoD may show up repeatedly.
In this article we will look at issues causing a bad_pool_caller BSoD. What has happened is that a thread in the laptop's processor has made a bad pool request. This means that it’s asking to use resources that are unavailable, nonexistent, or in use by another thread. It could also mean that the pool header is corrupted — regardless of the particular error, it, like most BSoDs, is caused by driver issues.
Drivers are what makes your computer work. Every device connected to your computer, and nearly every component inside it has a software driver that determines how Windows interacts with your device. When driver issues are encountered- which is fairly common on new operating systems like Windows 8 — it can cause a lot of problems, but, fortunately, sometimes there is an easy fix.
Recently Connected and Installed Device
Try to determine which device was last connected or installed before an error appeared. Often this can be a new peripheral device. Go to Device Manager (in the Control Panel) and find the driver for the recently connected peripheral device driver. From there, you can get Windows to search for updates, you can disable it, or you can uninstall it entirely. You can also disconnect the problem device and perform a system restore to before the device was connected and supporting software was installed.
Recently Installed Program
If your drivers aren’t the problem, a recently installed program may be the issue. If you can determine what program you installed that started this, uninstall it or perform a system restore to before the program was installed, and, after a restart, you should be good to go.
System Restore
Windows 7 and earlier
Windows 8
Any further issues that cannot be resolved may require your computer to be repaired.Every time we try to connect his Nano it causes the PC to crash with this Bad Pool Caller message.
is the BADPOOLCALLER citing a specific file, Laurita? if so, what is it called? (exact spelling please.)
if it's not citing a specific file, let's try getting a minidump to the Apple engineers for a look.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing -
Please help me Solve Bad Pool Caller Error (Windows 8)
I'm repeatedly getting "Bad Pool Caller Error" on my Windows 8 PC causing it restart again and again. Tried all I knew, nothing worked. However, I'm able to use the PC in Safe Mode (right now I'm on it). Here is the link to dump files (zipped),
-https://onedrive.live.com/?cid=574E051B8481CE34&id=574E051B8481CE34%21231
Thank you in advance,
Anup MehraAM
For starters you need to update to win 8.1 ASAP and you need to either remove or update your PGP (Related to PGPsdk.sys PGP Software Development Kit NT Driver from PGP Corporation.) which is dated 2005 and can not possibly work in win 8.
Then please run driver verifier to find the under lying issue
These crashes were related to memory corruption (probably caused by a driver).
Please run these two tests to verify your memory and find which driver is causing the problem. Please run verifier first
If you are over-clocking anything reset to default before running these tests.
In other words STOP!!!
If you do not know what this means you probably are not
1-Driver verifier (for complete directions see our wiki here)
2-Memtest. (You can read more about running memtest here)
Wanikiya and Dyami--Team Zigzag -
Bad pool caller error on Windows 8
Hi
when i try to open a dvd file through cyberlink power dvd or try to play any video though power dvd ,blue screen appear with bad pool caller error.Here
is my dump file can somebody help me solve it?
https://skydrive.live.com/redir?resid=631D315AE22B5BD7%21172
thanks in advanceLN
These were Related to
atikmpag.sys AMD multi-vendor Miniport Driver from Advanced Micro Devices, Inc. Yours is 2 years old. I would install the newest driver available.
If you continue to crash I would remove McAfee and use the built in defender in its place.
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
Machine Name:
Kernel base = 0xfffff803`26613000 PsLoadedModuleList = 0xfffff803`268dfa20
Debug session time: Tue Jan 7 11:29:25.189 2014 (UTC - 5:00)
System Uptime: 0 days 0:03:21.104
Loading Kernel Symbols
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : igdkmd64.sys ( igdkmd64+1612 )
BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 0000000000000099, Attempt to free pool with invalid address (or corruption in pool header)
Arg2: fffff880042bfa28, Address being freed
Arg3: 0000000000000000, 0
Arg4: 0000000000000000, 0
Debugging Details:
BUGCHECK_STR: 0xc2_99
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: wmplayer.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff80326c5d19c to fffff8032666d440
STACK_TEXT:
fffff880`1c5db1e8 fffff803`26c5d19c : 00000000`000000c2 00000000`00000099 fffff880`042bfa28 00000000`00000000 : nt!KeBugCheckEx
fffff880`1c5db1f0 fffff803`267a90e9 : f617e594`f77ba7cd abf4526f`4068c80d 0821daac`4bda7310 c9b150af`c6357f79 : nt!VerifierBugCheckIfAppropriate+0x3c
fffff880`1c5db230 fffff803`26885b39 : fffff880`042bfa18 fffff880`1c5db2e9 00000000`000000ff 76313c00`91136869 : nt!VerifierFreeTrackedPool+0x41
fffff880`1c5db270 fffff880`04b00612 : fffff880`042bfa28 fffff8a0`09882e80 00000000`00000000 fffff880`1c5db6b0 : nt!ExFreePool+0xa6b
fffff880`1c5db350 fffff880`042bfa28 : fffff8a0`09882e80 00000000`00000000 fffff880`1c5db6b0 fffff880`00004b80 : igdkmd64+0x1612
fffff880`1c5db358 fffff8a0`09882e80 : 00000000`00000000 fffff880`1c5db6b0 fffff880`00004b80 fffff880`00000400 : atikmpag+0x32a28
fffff880`1c5db360 00000000`00000000 : fffff880`1c5db6b0 fffff880`00004b80 fffff880`00000400 fffff880`1c5db380 : 0xfffff8a0`09882e80
STACK_COMMAND: kb
FOLLOWUP_IP:
igdkmd64+1612
fffff880`04b00612 ?? ???
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: igdkmd64+1612
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: igdkmd64
IMAGE_NAME: igdkmd64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 526eddae
FAILURE_BUCKET_ID: 0xc2_99_igdkmd64+1612
BUCKET_ID: 0xc2_99_igdkmd64+1612
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0xc2_99_igdkmd64+1612
FAILURE_ID_HASH: {3ffadce8-e9ff-ec0c-363d-6cfbdfbb1ba3}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag -
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag
Maybe you are looking for
-
Satellite Pro A120: What is a part number of mother board
Hello, I want to know the part number of my Toshiba Satellite Pro A120-223 systems board, I've been trying to look for it on actual board, but I can't seem to find it written anywhere. Is there a database of part numbers anywhere online..? I've been
-
Greeting gurus it is some setup issue with sqlplus ? I can run this sql using TOAD but when this sql is issued using sqlplus in the unix shell it gives the error below We do . oraenv and gives the instance name but it still gives us this error any he
-
Is Adobe Live Cycle PDF Generator supported on virtual servers?
Is virtualization of Adobe LiveCycle in a Production environment supported? Can someone confirm that virtualization of livecycle is supported by Adobe in a production environment.? If so, is proprietary hardware required? Or can any server hardware (
-
Tried to install git 1.8.5.2 on os x 10.6.8
I installed git 1.8.5.2 on os x 10.6.8. When I try to run any git command, it just says "Illegal instruction"
-
Flash player is installed but won't work
I have attempted to installed flash player multiple times and it seems like it installs but it doesn't work. I need flash player in order to use notebook software for a smartboard. I am currently using a MacBookPro in which I am the only user. Ple