BAM-06146 and BAM-01265 Faults

HI,
I am getting below fault when i am pushing payload to BAM Data Object using BAM Adapter in BPEL flow.
Is there a problem with payload( according to BAM-06146) or tablespace problem (according to BAM-01265) or any other problem is there.
Please help me to rectify.
Used : SOA SUITE 11.1.1.6.0
<fault>
-<bpelFault>
<faultType>
0
</faultType>
-<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="summary">
<summary>
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'writetoBAM' failed due to: javax.resource.ResourceException: java.rmi.RemoteException: *BAM-06146: Cannot upsert rows in data object /public/DataObject/KPI/BOM/ECN Created For BOM.;*
nested exception is:
oracle.bam.adc.common.exceptions.CacheException: *BAM-01265: An error (No more data to read from socket) has occurred in the Active Data Cache storage system.".*
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.
</summary>
</part>
-<part name="detail">
<detail>
No more data to read from socket
</detail>
</part>
-<part name="code">
<code>
null
</code>
</part>
</bindingFault>
</bpelFault>
</fault>
-<faultType>
Regards,
Abhinav Gupta

HI ,
Now this error is coming also in server console
<Aug 2, 2012 9:00:34 AM IST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "BAMDataSource" failed with exception: "java.sql.SQLRecoverableException: Closed Statement".>
<Aug 2, 2012 9:00:38 AM IST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "BAMDataSource" failed with exception: "java.sql.SQLRecoverableException: Closed Connection".>
DO i need to do increase capacity ??
Oracle WebLogic ServerConsole>Datasources>BAMDataSource>Configuration-Connection
Pool>Maximum Capacity, and set BAMDataSource to 200 (default 100).
Please help its urgent !!
Abhinav
Edited by: Abhinav on Aug 2, 2012 9:41 AM

Similar Messages

BAM HA and Data Consistency

Hi,
I need to preserve consistency of data in BAM, meaning BAM itself does not require HA, but I need to guaranty there is no loss of data (even if BAM server is down). I have a single BAM server and a cluster of WLS where the JMS queues/topics are located (data is read from JMS queues/topics using EMS).
Using any kind of topic means loss of data once BAM server is down.
BAM does not reconnect after migration so using a queue on a migrate-able JMS server also does not seem to work.
Using a distributed queue requires a queue for each EMS instead of using a single queue with Message Selector. And anyways there is no reconnection in this case as well.
What would be the preferred approach than?
Any suggestions are highly appreciated.
Regards.

Hi
There are a couple of performance related measures that you can take :
- Creating aggregates on 3-4 objects which are very popular in terms of reporting. Make sure that you don' t go overboard with this as maintaining too many aggregates could create a memory issue.
- If you are using BI 7.0 , then go for 'Repartitioning'. Would help you in loading data as well as during reporting.
- Compressing / Indexing are always available and good options.
- I don't compressing could create an issue even if your Info cube gets populated thru multiple data sources.
Cheers
Umesh

Email activity for soa and bam with pre-built virtualbox images

Dear OTN,
i am running pre built virtualbox image for soa and bam and want to run with email activity and configure the email inside the virtualbox can anyone help me with email activity in pre-built virtualbox image.
Thanks & Regards,
Pavan

Hi there
I have a Technote that shows how the information can be published from EBS to BAM. In addition you could create an end to end visibility across the products e.g. B2B - BPEL - EBS - Financials etc by raising the events to BAM .
There is no out of the box dashboards available today. However, i have a number of customers who are doing this use case by themselves or through some SI/Oracle consulting.
can we contact you offline to discuss your requirement?
http://www.oracle.com/technology/products/integration/bam/11g/technotes11g/whitepaperBAM_E-BusinessSuiteIntegration.pdf
There are certified adapters available for EBS to FM as well.
Regards
Payal
Edited by: PayalS on May 21, 2010 4:25 PM

BAM Error - during the creation of BAM Activity and View in EXCEL

I'm getting an error "The Cube could not be created successfully. Please edit the view and validate the inputs" during the creation of BAM Activity and VIEW in MS Excel for BAM
Error Details:
Error Description:
The following system error occurred: Invalid class string .
Error Source:
Microsoft OLE DB Provider for Analysis Services 2008.
Please help me in resolving the issue. Thanks in Advance!!

Hi Ramesh,
Below link has the information related to all the prerequisites for using BAM Add-In for Excel.
Kindly ensure that you have all the files in place before creating BAM Activity and View.
http://msdn.microsoft.com/en-us/library/aa560476.aspx
Rachit
Please mark it as Answer if this answers your question

Oracle BIEE And BAM

Hi
I want to know what is the actual purpose of BIEE. As I know BIEE is only used for read only Data we can not display current situation or running data on BIEE but we can do this on BAM. And also we can use BAN for stored Data as well as running data. Then what is the actual use of BIEE. If BAM is also available.
Thanks
Siddhartha P

Hi Suneel,
Yes I have seen the same issue with mine too.the problem with because of have huge number of tables in APPS schema in EBS.
In my case I waited about 21 minutes ,after that the tables got populated, even if got i am not able to select my required table.I tried lot of time I am finally created DataObject.
after tables got populated I used key board to select tables by using up arrows & down arrows to select Table.
I think this techniques may useful, be patience you will get!!
Regards
Siva Shankar

How to have Weblogic and BAM process run in background

I ssh to the Weblogic (also the BAM) server via putty and use below command to start the weblogic and BAM:
/opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh
/opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1
And then I have no way to have the weblogic and BAM run in backgroup as it needs to ask me for login and password. I cannot close the ssh connection neither otherwise the weblogic and BAM processes will die
Clay

Hi Clay,
Both these points can be easily handled.
To start admin server enter the below command with the &. This & will make the process run in background.
. /opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh &
If you want the logs to be redirected to some file then you can use a nohup as given below
nohup . /opt/oracle/Middleware/user_projects/domains/base_domain/startWebLogic.sh &
Same holds good for bam serevr also
. /opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1 &
OR
nohup . /opt/oracle/Middleware/user_projects/domains/base_domain/bin/startManagedWebLogic.sh bam_server1 &
It will respond to you with the process-id, you can just hit an enter and safely close the putty session while the server is still up & running.
To stop the same, in a new putty session you can enter the below. Here you need not(will not) give &
. /opt/oracle/Middleware/user_projects/domains/base_domain/stopWebLogic.sh weblogic welcome1 t3://hostname:port
. /opt/oracle/Middleware/user_projects/domains/base_domain/bin/stopManagedWebLogic.sh bam_server1 t3://hostname:port
Password:
As you see above we are not passing user-id/password while starting the server. We need to create a file named boot.properties and place it in /opt/oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer/security directory. security directoy will not be present, you have to create it.
Contents of boot.properties file will be only 2lines as below
username=weblogic
password=welcome1
On next startup server will encrypt the password.
Same boot.properties file has to be created in /opt/oracle/Middleware/user_projects/domains/base_domain/servers/bam_server/security location.
Hope this answers your question.
Thanks,

Just built, and BAM - BSOD!! Hello, MSI!

Ok, specs.
MSI Neo2 Plat Bios V1.3
Winchester 939 3500+
BFG nVidia 6800 Ultra
Corsair XMS 512x2 3200C2
Win XP, SP2
WD 80g CE + WD 120g CE hds
NEC 2500A
Lite-On DVD 16x
Coolermaster CM Stacker
Got Win XP installed, got SP2 installed, all driver chipsets, and had activated XP on the internet. Installed Zonealarm Pro and BAM! BSOD. 4 reboots and 4 BSOD. Now, it says check Gigabit cable (its onboard, no cable silly computer!) and says SYSTEM BOOT ERROR INSERT SYSTEM DISK.
Dude, this is a brand new board? ? I have checked and double checked avery cord, moltex, fan, you name it. Unplugged IDEs, everything. Help???

Quote
Originally posted by ttreaders
Quote
You think its the ram? OK I will run memtest; I used this ram in another rig for the last year and it was A_OK, but maybe there is incompatibility with this MSI board. Will try. EDIT: FYI, I have the ram in slots 1+3 (green).
I am not positive but on the Neo2 don't you have to run with 1 stick in a green slot and the other one in a purple slot for the memory to run in dual channel mode?
the motherboard manual was a little confusing for me; if its not written for a 2 year old then I can't understand it...
I asked this question not here (I guess I should have come here first lol) but at
[H]ard and Anand forums; if this is the case someone please let me know!!! I would greatly appreciate it!
I currently have it in slot 1 and 3. I installed an xp 90 on th is board and guess I am gonna have to live with the fact I am gonna now have to pull it off and reconnect it to get my ram out...damn!!!
Before I do this, can someone confirm this for me?

Issue with creating a BAM Alert in BAM console!!!

Hi ALL,
I am getting script error while creating a BAM Alert in BAM console.
Event trying to create : "when a data filed in a dataobject meets specified condition"
Error occuring: while click on "this data field has a condition of x"
popup window Error Description: "object doesn't support this property or Method"
Pleaase help me on same. Appreciate your hhelp and time in advance!!!
Thanks
--Kris

Hi Anuj,
I am facing the same problem.
I am using Windows 8, IE 10. I need to click F12, to change the Browser Mode to IE 7 to open BAM application. Everything works fine until I came to set Alter the exactly same location. I am getting the same error.
I installed IE tab for FireFox. Now I am able to open BAM applicaiton FireFox, but getting the same error at the same place.
Thank you very much for your help or any information,
Alena

PI 7.0 SOAP message reply HTTP 500 and after the fault message

Hello Everybody,
I have the scenario RFC -> XI -> SOAP in synchronous mode.
I use for the mapping XSLT because I have to put some dynamic data comming from the RFC in the header of envelope.
At level of adapter receiver SOAP , I flag the "do not use envelop"
In normal, that works .
When the is an fonctionnal error in SOAP service, it sends me back an error HTTP 500 and afterwards the fault message in a soap envelop format. In that case, how can I pass over this error to treat the envelop because in adapter, it is stopped and it returns a short dump to the RFC.
Is there somebody who can help me with this problem ?
Thanks in adavance for your answers .
Regards.
Eric.

Hi,
In case of a SOAP error while processing the request, the SOAP HTTP server MUST issue an HTTP 500 "Internal Server Error" response and include a SOAP message in the response containing a SOAP Fault element
Thanks,
RamuV

Diss/Re-assembled Hp Dv6, screen and start button fault

Hi! Before I start I pre-apologize for posting this thread wrong, and possibly bad English. I have had my Hp Pavilion Dv6c10ed for a couple of years, and today I tried to clean the fan. Unfortunately I think I failed somewhere, because the power button works odd and the screen is all white/gray with black lines. I think I know what's causing the on/off button to be broken, because the connector had a purple plastic thing made for pulling it out, which I accidentaly pulled off :/ Can you just glue it on, or take it to a workshop so that someone can replace it? I think it's the one on the upper left under the keyboard. And the second fault is the screen, which I don't where that connecter is placed. Is it a normal and easy problem to fix? I'm starting to ask here before I leave it at someone who can fix this, since I'm a student with not much money, and I prefer to have my computer fixed without having my local computer rep. to take 50$ to find the problem. Would be greatful if I got some answers.

Hi @SweHppavilion ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Pavilion dv6 Notebook and issue with the On/off button. Here is a link to your guide that might help you with the button. Page 77 Shows you how to replace the board for the Power button.
The power button board cable is not included in the power button board spare part kit. The power button board cable is included in the Cable Kit, spare part number 640422-001. I would google the part number so you could look at the pricing.
You could call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region. They would be happy to assist with the part.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

BAM Report and Active data cache

I am having problems with reports that have automatic active data retrieval.
It does not work.
If I load the report it extracts the data correctly from an external data source. If I Reprompt or refresh it brings back changed data from the data source.
It does not automatically poll for changes even though it is set in the report properties.
If I stop and start the Active data cache service it starts polling and reconnecting, but not resynching the data.
In the Active data cache log I have the following entries :
2005-12-01 09:36:54,062 [3576] ERROR - ActiveDataCache Viewset not found:
2005-12-01 09:36:54,078 [3576] WARN - ActiveDataCache Exception occurred in method GetChangeList
Stack trace:
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.GetViewset(String strViewsetID)
at Oracle.BAM.ActiveDataCache.Kernel.Viewsets.ViewsetManager.GetChangeList(String strViewsetID, Int32 iTimeout)
at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.GetChangeList(String strViewsetID, Int32 iTimeout)
Has anyone any ideas on what the problem is ?
Thanks

Sriram
Can you identify your company and project.?
a) Maximum capacity of ADC == maximum capacity of your underlying Oracle DB used by BAM as repository.
b) Retention period - infinite - data is there in BAM ADC (also in BAM repository) till you manually delete it (there is no automatic delete of old data)
c) Yes ADC stores its data internally in the Oracle database (aka BAM repository)
d) No - we generally donot publish ADC internals. This is a known decision since end users will only work either to put data into ADC or plot reports/dashboards from BAM GUI. You have to be very specific on what your are trying to acheive and we can suggest possible alternates.

BPM and BAM Connectivity Issue....

Hi All,
I'm going to connect my BPM project to BAM application.
Initial works are done. But the Data Object should follow name format like 'BI_<partition>_<composite name>_<process name>' .
But my composite name and process name has '_' characters. Will this affect to the naming convention ??
(Version 11.1.1.6.0)
Thanks,
Nir

This is just a guess as I'm not a Transall user. My first guess is that your DSN will need to be made using the 32-bit ODBC driver. As a default, using Windows 7 or later, you created a 64-bit source.
To create or modify a 32-bit DSN on 64-bit Windows, you must run C:\WINDOWS\SysWOW64\odbcad32.exe. You may find it useful to create a shortcut to this on your desktop or Start menu if you access it frequently. I believe the interface is exactly the same after that.

Integrating BPM 11g and BAM

Hi everyone,
I'm using Oracle SOA Suite PS4 (11.1.1.5) on Oracle Linux 6, 64-bit.
I have a simple BPM project, from which I want to send data to BAM to be able build a BAM dashboard.
I went through all neccessary steps:
1. I configured BAM adapter
2. I configured BPMN engine for BAM integration
3. I imported BAM Monitor Express
4. I configured BPM project (enabled BAM and provided JNDI,...)
I've repeated previous steps several times and I'm pretty sure that I didn't do any mistake. I also tried to restart servers, etc.
However, when I deploy the project the BI data object is not created as it should be and also when I create a new composite instace, the following errors occur in SOA server log:
1. Errror
Module oracle.soa.bpmn.engine.sensor
Host localhost.zeus
Host IP Address 193.2.72.73
User <anonymous>
Thread ID BAMActionMDB
ECID d43c0affab89694f:5f271097:131e7a88bfd:-8000-0000000000001ced
Supplemental Detail java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:19
2. Error
Module oracle.soa.bpmn.engine.sensor
Host localhost.zeus
Host IP Address 193.2.72.73
User <anonymous>
Thread ID BAMActionMDB
ECID d43c0affab89694f:5f271097:131e7a88bfd:-8000-0000000000001ced
Message Unable to invoke the webservice
Supplemental Detail java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
3. Warning
Component soa_server1
Module oracle.bpm.analytics.bam
Host localhost.zeus
Host IP Address 193.2.72.73
User <anonymous>
Thread ID BAMActionMDB
ECID d43c0affab89694f:5f271097:131e7a88bfd:-8000-0000000000001ced
Message failed on bamDataObjectCache.getBAMDataObjectBean(). Unable to find /Samples/Monitor Express/COMPONENT
There is no error on BAM server so it looks like the SOA server (BAM adapter) can't connect to BAM (java.net.ConnectException: Connection refused).
Can anyone help, please?
Regards,
Sonny

Hi,
I also had the same issue with 11.1.1.5. The data objects were not getting created. I manually created the data object using BAM Architect. And that solved my issue. I was able to see graphs in BAM.
However, 11.1.1.4 is working fine. It creates the data objects for BAM during deployment.

BAM APIs and TPE in BizTalk

Hi - i have been assigned work related to tracking data using BAM (its like Purchase Order, Sending/receiving Invoice, for Property related work)
I know TPE is used to track only at Ports level which is not always helpful and if there is looping involved it doesnt work.
BAM APIs is better way to approach as it can be customisable as per requirement.
Is there any real good detailed example of showing using BAM for tracking # of Received files, # of loop records, tracking within Orchestration, Sent delivery , and lot other stuff.
Please let me know.
MBH

There are few SDK samples available for learning about BAM
API:
From BizTalk SDK samples:
BAM
API(BizTalk
Server Sample)
Instrumenting a Solution: Step-by-Step
APIUsage
BAM
APIfrom
an Orchestration Expression (BizTalk Server Sample)
For looping records:
Capturing BizTalk 2006 BAM Data On Looping Process
I would also recommend this book,
Pro BAM in BizTalk Server 2009
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Oracle EBS and BAM

I am trying to integrate Oracle EBS R12 with BAM, so I created external data source in BAM and it got created successfully.
But when I try to select the table from this data source in order to create data object, the lov for table name never shown up, it has been busy for a long time in getting table names from this data source and after sometime, its going out.
I know this may be because we have huge number of tables in APPS schema in EBS.
Is this the best way to integrate EBS with BAM through external data source or any other suggestible way?
Regards,
Suneel Jakka

Hi Suneel,
Yes I have seen the same issue with mine too.the problem with because of have huge number of tables in APPS schema in EBS.
In my case I waited about 21 minutes ,after that the tables got populated, even if got i am not able to select my required table.I tried lot of time I am finally created DataObject.
after tables got populated I used key board to select tables by using up arrows & down arrows to select Table.
I think this techniques may useful, be patience you will get!!
Regards
Siva Shankar

BAM-06146 and BAM-01265 Faults

Similar Messages

Maybe you are looking for