Bank statement issue with ending balance less than 1 euro

Hello,
we have an issue. When the ending balance amount in the ebs is 0,15 the system reads this amount as a BAI status instead of an amount.
Consequently the number near the 015 is read as an amount.
For example this is a row of the ebs:
88, 045,015,060,015,072
the system read 015 that should be and ending balance value as a closing ledger status and consequently the 072 is read as an amount even if this is another status.
Do you know if there is a OSS note released by SAP about this issue?
Thank You

Hi Larissa,
As far as I know, if 015 will come with note to payee line 16 then system will consider it as a amount. But if 015 will come with note to payee line 88 it will be treated as transaction type code status, like010 for Opening ledger balance and 015 for closing ledger balance etc.
16, 475,015,00000085326,00000085326
88, 045,015,060,015,072
Regards,
Kalim

Similar Messages

Anybody else had recurring issues with MBPs of less than a year old?

Both my son and I bought MBPs less than a year ago, and we've both had two faults develope which were repaired by the store (not Apple) where they were bought. My son's MBP has developed yet another fault, and frankly, I'm fed up of traipsing up and down from one end of our town to the other, waiting 3 or 4 weeks for the repair to be done, only to find that in another 3 months another fault is occuring.
The Apple expert in the store suggested that there might have been a batch issue, as both of our MBPs came from the same batch, and advised contacting Apple.
I'd really rather conduct this by email, as I don't have time to spend hanging around on a phone.
Anyone out there give me some (constructive only) suggestions please?

Many thanks for your help, I'll try to find time today.

Problem with the operator less than or equal to in a weby query

Hi all.
The universe is a OLAP Universe
When i created a query in webi and put the month in the filter area with the operator less than or equal to like this.
Month (less than or equal to) 2010.01 for example. The all result brings also the all values like 2010.02, 2010.03, etc
What is the problem and how can fix that ?
Thanks

Looks like you are using a less than or equal to with a Sting data type.
I think you should change to your filter to Year <= 2010 And Month <= 1. Hope you have a month and year object in you BeX.
Anil

Upload bank statements interface(with different layouts)

HI
My component is upload bank statements interface(with different layouts) .
to which module it belongs exactly.And how to proceed with this....
plz give u r sugessitions.................
pavan kumar

firstly go through the documentation and TRMs
if you have any doubt in the coding . the send the code and errors encountered
so, that we can help you.

I have started migration système to transfert from hold Macbook pro to New MacBook air application starter successfully for several hours. But since more than 3 hours I got the message transferring Time zone paramètres with time left less than 1 minute.

Hi
I have started migration système to transfert from hold Macbook pro to New MacBook air
Application starter successfully for several hours.
But since more than 3 hours I got the message "transferring Time zone paramètres " with time left less than 1 minute.
Any recommendation or suggestion to solve it ?
Many tanks

If it has run for 3 hours it's probably done and you can quit Migration Assistant and reboot the new computer. In the future rather than using Migration Assistant I would recommend using Startup Assistant which tends to be a bit more reliable and does not create a new user account as MA does. If you're interested here is an article explaining Setup Assistant tips.
Roger

FF_5 - Issue with Account Balance option while processing BAI file

Hi All,
We are getting a runtime error while trying to process the same bank file again through transaction FF_5 with 'Account balance' option checked. And the message says 'The ABAP/4 Open SQL array insert results in duplicate database records.' with the command 'Insert_FEBPI'. This happens only when we have combination of uploaded and not uploaded statements in the bank file.
I could find a OSS note for the same issue but that was for the file format MT942. We are using BAI file format. Can some one please help me in this regard.
Thanks in advance!
Regards,
Jalendhar

This is standard SAP functionality. If there are no applicable notes, then you should open an OSS message.
Rob

Terrible download speed with Infinity 2 (less than...

I was a relatively early adopter of BT infinity. When I first signup I recieved a consistent 70mbps+ down 80mbps up.
Over the last few months this has dropped to around 40mbps down and 12mbps up.
I posted here regarding the issue, contacted BT, and even Emailed the tech support guys recommended here on this very forum.
Unfortunately nothing improved, however since 40mbps down was okay for almost everything I needed to do I decided to leave it.
Now however, the situation has become dire. For the last month my download speed has been consistently less than 4mbps with my upload speed being 2-3x as fast!
The BT speedtester refuses to complete due to the test taking too long. However I have managed to get a screenshot from speedtest.net.
To make matters worse, webpages down't always seem to complete, with many requests eventually timing out.
I am at a complete loss and would like some advice on where to go from here. I have for all intents and purposes lost faith in the standard BT customer service having spent hours on the phone with them before when my speed dropped to 40mbps a few months ago.
Any advice would be very much appreciated.

Hi
I also am having the exact same issue. I am on the phone now and they are telling me now that is all my line can handle.
This is disgusting, the service is disgusting, cannot get an engineer out. For over 10 months i could get 60mbps steady downloads now i can't
even stream a youtube video!!
even though i have another infinity 2 line in the downstairs living room getting 65mbps steady downloads from the same exchange.

Electronic Bank Statement clearing with FI-CA postings

Hello Everyone,
FI-CA transfer to General Ledger posting is done on summary basis. For ex- If there were 2 postings for $100 each, then when the transfer is done from FI-CA to G/L, it posts $200, but bank is going to send information for 100 with record 16 (BAI) and one more record for $ 100, Thus sending 2 records.
How do i reconcille these 2 items automatically in bank postings against one postings made from FI-CA, through FF_5 upload.
Is there any algorithm for clearing FI-CA, or can we send send individual postings to G/L from FI-CA, so bank statment is reconcilled properly.
I would really appreciate your help.

The Posting date is not defined in the BAI file. The program should pick up the statement date in the BAI file and populate the posting date with the same value. In reading through the documentation for the program RFEBKA00 which is run via FF.5, I discovered that the include program RFEKA700 deals with BAI format. The file that is downloaded from the bank, contains multiple accounts and their respective activity for that respective day. When we import the file, all the other accounts are handled correctly. That is to say that the posting date that gets populated in the clearing document is set to the statement date from the file. The issue that we are facing has to deal with the last account being sent in the file. On this account, the activity is missing the posting date so the system sets the posting date to the current date. When I review the line items from the file in FEBA, the last activity item in the file has the correct posting date, the rest of the activity items do not have the correct posting date. I can review this information by looking at table FEBEP. On the last records for the Bank Statement Date's file, associated with the last account in the file, field BUDAT does not have anything populated in the field.
I am at a total loss as to why this would work for all the other accounts and only the last activity item on the last account when I process the file.
Suggestions?
Wayne

Manual bank statement post: with GL accounts

User has posted the manual bank statement. It is successfully posted but in respective sub GL accounts open it management and line item management is not configured in the ledger. so after posting bank statement we have changed the open item and line item display.
we have deleted and posted again but in main GL Account on line item is still exist and balance showing diffrence 470 EUR
how can i change that GL Account as 0 Balance.

Hi,
When Manual bank statement is run, a JV gets posted knocking of subledger with debit or credit (Payment/Deposit) and one line item will be posted in the main bank account.
In you scenario, take the document available in the main bank account and reverse it in transaction code FBRA. This will knock off all the balances and the ledger will be zero.

Selected state issue with Menu Module V2

OK so I am getting an issue with Menu Module V2. I have used this before with success but this time I have hit a wall. I possed this question to BC live chat and they bugged out real quick.
The site in construction is http://www.urbanista.com.au
What is happening is that in the top right tools nav with the headings Home, Services, People, Contact Us using Menu Module V2. The Heading Services has a drop down and this is where the issue resides. Roll over any of these nav devices and you will see they will highlight orange. Home is already auto activating its Selcted state. Click on Contact Us and it will do the same. Roll over and click on Services and it appears to have worked. While in Services roll over the drop down again and you will see all links have activated the Selected state. This is the issue. If you view the code of the Services UL you will see only the Services state has been alocated the Slected state. See below:
<li id="Services" class="selected">
<a href="/services.htm">Services</a>
<ul>
<li id="tools-panningdev">
<li id="tools-housing">
<li id="tools-urban-renewal">
<li id="tools-project-management">
<li id="tools-feasibility-tools">
<li id="tools-governance-systems">
<li id="tools-communications">
<li id="tools-projects">
</ul>
</li>
The CSS that runs the nav is as follows:
ul.dropdown {
    font-weight: normal;
    font-family: Arial, Helvetica, sans-serif;
    font-style: normal;
    text-decoration: none;
    ul.dropdown li {
    background-color: transparent;
    color: #999;
    padding-top: 5px;
    padding-right: 10px;
    padding-bottom: 5px;
    padding-left: 10px;
    font-size: 12px;
    ul.dropdown li.hover,
    ul.dropdown li:hover {
    background-color: transparent;
    color: #FFF;
    ul.dropdown a:link,
    ul.dropdown a:visited    {
    color: #FFF;
    text-decoration: none;
    ul.dropdown a:hover        { color: #ff871f; }
    ul.dropdown a:active    {
    color: #b33b00;
    /* -- level mark -- */
    ul.dropdown ul {
    width: 150px;
    margin-top: 1px;
    background-image: url(/images/nav-transparency.png);
    background-repeat: repeat;
    color: #FFF;
    ul.dropdown ul li {
    font-weight: normal;
ul.dropdown li.selected a {
    color: #ff871f;
The last entry 'ul.dropdown li.selected a {color: #ff871f;}' is required in order to allocate a Slected State. Without it not Selected state is active and the links al remian white.
I have tried all manner of combinations and additonal tags with no success. Any suggestions greatly appreciated. I have not modified the default Javascript provided by BC in the system apart from allocating the required ulTagClass as specified. The Javascript in the supplied 'container.html' is as follows:
<script type="text/javascript" >
    // ids need to be unique per page, use different ones if you are including multiple menus in the same page
    // id of the nav tag, used above
    var divTagId = "myMenu1";
    // desired id for 1st <ul> tag
    var ulTagId = "myMenu1List";
    // desired class for 1st <ul> tag
    var ulTagClass = "dropdown dropdown-vertical";
    if ((null !== ulTagId) && ("" !== ulTagId)) {
        document.getElementById(divTagId).getElementsByTagName("ul")[0].setAttribute("id",ulTagId );
    if ((null !== ulTagClass) && ("" !== ulTagClass)) {
        document.getElementById(divTagId).getElementsByTagName("ul")[0].className = ulTagClass;
    // this will set the selected state
    if ((null !== ulTagId) && ("" !== ulTagId)) {
        catSetSelectedCSSItem(ulTagId);
</script>
Lastly this is one of the recomended navs by BC at the following address: http://lwis.net/free-css-drop-down-menu/
I have used these before with success but for the life of me this has stumped me big time.

Hi Matthew,
Having a super quick look at the code I'd say it's because of:
ul.dropdown li.selected a {
    color: #ff871f;
This affects all the child elements.
To override this down the line you could do something like:
ul.dropdown li.selected ul li a {
    color: #fff;
This would override the parent link color when selected.
You could probably then also add:
ul.dropdown li.selected ul li.selected a {
    color: #ff871f;
For the dropdown selected states.
That's a quick look though so don't quote me too much

ERROR: PGI in delivery with picked quantity less than delivery quantity

Hi Friends!
I need your help, i have the following situation:
Outbound Delivery with batch position:
90001 Mat DD3450 Picked Delivery Quantity=98 and Picked quantity=84
Overall Pick Status = "B"
Overall WM Status = "C"
The outbound delivery was posted completely and the following documents was generated:
WMS transfer order: With 84 UN in quantity
Material document: With 98 UN in quantity
Invoice: With 98 UN billed
The question is how was posible to generated the PGI for the outbound delivery when the picked quantity was less than delivery quantity? is a SAP program error?
Thanks
Best regards
Enrique

benito,
Check your Picking Confirmation config. as you are using WM/Lean WM, then your Shipping Point should have a mandatory requirement to confirm all TO's. The confirmation should update the Picking Status and the Overall GI Status to 'C' (with any relevant changes to the picked qty). Give that a go.
Cheers,
Paul...

Restrict with variable: selection less than

Hi,
I want to restrict a characteristic against a variable, lets say, Current Fiscal Year. But I want the restriction to be "Less Than" currunt fiscal year and NOT "egual to."
It's an SAP Exit variable that I'm using, so I wana hardcode it to show "less than".
How do I achieve that?
Frank
Message was edited by: Frank

Hi:
For the variable type in query designer, select the Selection Options. Now, when you run the query, you will get to choose all the options inclufing what you want.
If you are not able to see these, create a new variable and make sure you select Type: Selection Options while creating the variable itself.
Ram Chamarty
Message was edited by: Ram Chamarthy

I TRY TO DO INTERNET BANKING WITH KOREA BASED BANK, BUT I NEED TO USE LESS THAN FIREFOX 9.0. MY COMPUTER IS FIREFOX 10.0.

hi, i try to use firefox to connect my bank information in Korea where i recently registered for internet banking. But , as soon as i get into that website, a window showing that i can not use this browser because it has to be firefox 3.5-9.0. Mine is firefox 10.0.Is there any way to downgrade this number?

Hey INJOOYON,
There are a lot of benefits to running the latest version of Firefox. You might want to consider running the older version on [http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 a USB Stick with PortableApps]. That way you'll still be able to run the latest version for your day to day activities.
You could also try User Agent Switcher: https://addons.mozilla.org/firefox/addon/user-agent-switcher/
If you still want to roll back to a previous version of Firefox, just take a look at the Knowledge Base article [[Installing a previous version of Firefox]].
Hopefully this helps!

XML Publisher Time out setup issue with load balancer

I have a single node install of Oracle Apps 12.0.4. When running an XML report, it completes successfully and I can view the XML report by clicking on the "view output" button.
I have an Oracle Apps 12.0.4 multi-node install with my database and admin tier running on the same box. I also have two app tiers front-ended with a cisco load balancer. In this environment, when I run an XML Report the job completes with a warning. I have reviewed the log file from the Output Post Processor log file and have the below errors.
[10/14/08 3:40:48 PM] [14736:RT4712865] Executing post-processing actions for request 4712865.
[10/14/08 3:40:48 PM] [14736:RT4712865] Starting XML Publisher post-processing action.
[10/14/08 3:40:48 PM] [14736:RT4712865]
Template code: FNDCPPGD_XML
Template app: FND
Language: en
Territory: US
Output type: PDF
[10/14/08 3:44:33 PM] [UNEXPECTED] [14736:RT4712865] java.net.ConnectException: Connection timed out
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.Socket.connect(Socket.java:516)
at java.net.Socket.connect(Socket.java:466)
at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:365)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:477)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:214)
at sun.net.www.http.HttpClient.New(HttpClient.java:287)
at sun.net.www.http.HttpClient.New(HttpClient.java:299)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:796)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:748)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:673)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:917)
at java.net.URL.openStream(URL.java:1007)
at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:217)
at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:195)
at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:131)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:224)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
I have double check my tnsnames.ora, opened an SR, researched in Metalink & on the web but am unable to find a resolution. Any help would be appreciated. Thanks!

we have the same issue. Any workaround so far?

Edge Animate CC 2014 issue with SVG - Images greater than 1024 x 1024

Hi, since i updated my Edge Animate CC for Edge Animate CC 2014 i have issues when i import .svg files. Edge told me "Images greater than 1024 may cause unexpected behavior on mobile device" when i import .svg files smaller than 1024 x 1024 ?
When i publish my animation i have a weird things happening and my image scaling default is 10% instead of 100% when i import. Someone had this issue ? Something we can do ? My images a less then 1024 x 1024 and work perfectly in Edge Animate CC 2.0

Ok. I've solved. I needed to load some things:
EC.Parallax.setup (sym);
The full code (that works for me) is:
-- compositionReady:
EC.Parallax.setup(sym);
// Load Edge Commons
yepnope({
load: [
"http://cdn.edgecommons.org/an/1.1.0/js/min/EdgeCommons.js",
// Load style sheet for the overlay
"http://cdn.edgecommons.org/an/1.1.0/css/style.css"
-- click
// Open image in spotlight overlay
// Set up configuration
var config = {
width: "1024",
height: "768",
type: "image",
source: "images/dog.jpg"
EC.Spotlight.open( config );
I hope to serve others.
Regards

Bank statement issue with ending balance less than 1 euro

Similar Messages

Maybe you are looking for