BAPI_GOODSMVT_CREATE - posting extra lines (amount being multiplied by 100)

Hello Gurus,
I am using BAPI_GOODSMVT_CREATE for posting.
When I check FBL3N, i see 2 lines:
The first one is correct while the second is a copy of the first one, with the exeception that the amount in Local Currency has been multiplied by 100. And this second line is not required.
I am passing only one line to the BAPI and I get 2 lines as output.
Has anyone encountered this problem before?
Thanks for your precious help.
Regards,
Parvez

Hello,
Here are some more information:
goodsmvt_code-gm_code    = '02'.
goodsmvt_item-move_type      = '101'.
The posting done in NISL is in fact done twice in SAP ECC6 :
a)      at normal standard price of the materials
b)      at standard price * 100 (current issue).
In 46C version, the posting was done only once at the standard price of the material. (correct)
In SAP ECC6, 2 postings are done:
            - Posting a) correct.
            - Posting b) multiplied by 100 should not exist. This error should be corrected.
seem to be related to the upgrade?
Any hint on this?
Thanks

Similar Messages

  • Contract Negotiation the amount is multiply by 100 in Price Agreements

    Hi Gurus:
    When I create a Contract Negotiation in Web Shop B2B, I indicate the Product ID the quantity and I specify a  price, when refresh the page(when I press enter) the amount is multiply by 100, when I introduce another item the two are multiply by 100 again and this behavior is repeating constantly when I press enter or indicate refresh in the page.
    I notice when I check the contract document by SAP GUI in TRX: CRMD_BUS2000121 and go to the Tab  u201CPrice Agreementsu201D and  I indicate the item price in the Item condition  and press u201Centeru201D the systems multiply by 100 de amount same as web shop. But when I indicated the price and currency and then press u201Centeru201D the systems didnu2019t (In the web shop the customer doesnu2019t has the possibility to indicate the currency).
    I checked the organizational model and has the currency indicated correctly, the customer has the currency indicated too.The country settings and the users settings the decimal notation is 1.234.567,89
    I was looking for SAP Notes but for the package level that we have in the systems doesn't apply
    Do you have any inputs for this??
    Thanks in advanced
    Sussie

    Hi Sussie,
    I propose that you create an OSS message for this issue if not already done. I have the feeling that you probably will not get a solution for it from anybody not seeing the customizing in your system.
    Greetings
    Torsten Kliesch
    Product Manager SAP CRM Web Channel

  • SKB1 is displaying unrelated/extra line items.

    Hi,
    I am encountering one problem which is related to KSB1 transaction. It's displaying extra line items which are not related to actual line items . Here is the scenario
    Actual Assessment Cycle contains one segment :
    Segment1 : Sender Cost Center group CG(C1,C2,C3,C4)1---All these cost centers are associated with functional area FA
    Cost element : 942XXXX
    Receiver Cost Center C5,C6,C7,C8----All these cost centers are associated with functional area FA.
    Amount $10
    After executing the assessment cycle when go to KSB1 it's displaying the following line items
    Doc No      Celement         Val in currency        Cost center     partner cost center    Ref Doc No    f unctional area     Posting date
    76942           942XXXX            $10                              C1                         C5                       76939        FA                       09/22/09
    76939           942XXXX           -$10                             C1                         C5                                         FA                       09/22/09
    76939           942XXXX            $0                               C1                          C5                                         FA1                     09/22/09
    76942           942XXXX            $0                               C1                          C5                        76939        FA1                    09/22/09
    I don't know why it's showing the line items which are realted to FA1 and these cost centers ARE assigned to functional area FA not to FA1.Does any one know from where it's pulling this information?Does any one know how it derives the functional area here. I don't know which table has this information(COEP,COEA,CCSS...?) How to fix this?
    I really appreciate your thoughts and input
    Thanks
    Br

    Hi Shekhar,
    What is happening in the system is standard SAP behaviour.. In case you do not want Down Payments to be updated in the system, please follow the steps below:-
    1. Create a new Field status group as a copy of G067 and make it say Z067(Assets field suppressed here) and assign it to Vendor related recon accounts(Spl GL A)
    2. After this, when you create a down payment request in F-47, you will receive an error message F5 378
    3. Go to transaction OBA5, enter work area as F5 and chnage the message no 378 to Warning (W)
    This setting will not generate additional line items.
    Regards,
    Kavita

  • GL posting clearing item amount and do not show doc status on the header

    Hello,
    GL post clearing amount both side and increase the no of items in the GL balance display. Inaddition, these clearing line item document header does not show document status field.  I have another GL which does not post extra two lines and clearing item document is empty and header shows document status as A (cleared item).
    Could you let me know what the difference and what need to be changed to make it not to post clearing items + and - and show doc status.
    Both are same FSG and only difference tick mark not done for balance in local currency.

    Thanks for your reply...but thats did not work. As I said earlier, I have a Structure in my rows and 2 characteristics in my free chracteristics and in my columns I have a selection of key figures...
    What I want is when I drill down on one of my 2 free characteristics, I do not want to see rows with amounts (KFs) zero or space.
    RR

  • Automatic Payment Run - Generate Extra line items

    Hi All,
    We need to create extra line items when automatic payment (F110) is run because we need sub-fund entries.
    For example:
    Automatic payment will create:
    Vendor a/c Dr.
    Unpresented Cheque a/c Cr.
    We need:
    Vendor a/c Dr.
    Sub-Fund a/c Dr.
    Unpresented Cheque a/c Cr.
    Sub-Fund a/c Cr.
    This is a requirement specific to our organisation. We need to add these extra line items while F110 is running and before document is posted. We have checked all the user-exits for transaction F110 and didn't find anything to add this.
    Any suggestions/ideas is highly appreciated.
    Regards,
    Sougata.

    Hi Sougata.
    Need to create Substitution rules (transaction OBBH) and within those rules you can define user exits (ZGGBS000 for e.g.). In those user exits, you can split the lines based on Document type (ZP, ZV) for automatic payment clearing.
    This is a customization + ABAP intensive approach, but is a approach that is supported by SAP and I have used it in the past to split document lines at any stage in their processing. It has been a while though and I don't have any examples to give you.
    Hope that helps!
    Rishi

  • System is generated extra line item of G/L while clearing throgh F-44

    Dear Experts ,
    When we processing clearing through F-44 , system is generating one extra line item of G/L ,  due to this system is not allowing for clearing as the message " Posting is only possible with zero balance ; correct document " is served by system.
    Actually while clearing , i am including TDS clearing document (posted via F-54) also .
    please suggest.
    Thanks & Regards
    Shailesh

    Hi
    1. First of all i have given advance to vendor with deducting TDS (@10%) via F-48
    2. after that i have raised one invoice for same vendor with deducting TDS via FB60
    3. vendor TDS clearing via F-54
    4. now when i going for vendor clearing via F-44 with taking reference from above F-54 document
    i got below error :

  • Withholding tax line amount exceeds message no.7Q320

    Dear all,
    Withholding tax type we are defined as a accumulated type. untill and unless it exceeds the minimum amount system will not calculate the withholding tax once it crosses the minimum amount system will calculate tds from one rupee on words. but now at the time of posting advance payment to vendor the system generates a error namely withholding tax line amount exceeds.
    As per my knowledge i convert the error message into warning even i know this not the good practice but according to situation what i did is correct. at the making those changes the system asks the request (workbench). i save under one new request when i transported to another client the system is generating warnings.
    when i transport the same from develpoment to quality the system generating error. i come to know this is through request status.
    What is the solution for this
    Thanks & Regards,
    Sankar

    Hello
    please go thorugh the menu path:
    spro->img->Fin acct-> Fin acct Global settings->withholding tax->extended withholding tax->calculation->withholding tax types->defien withholding tax type for payment posting
    give ur country key
    double click on your W.T type
    under central invoice option----you have to select radio button for central invoice & 1st p. pmt
    this might solve porblem
    please assing points if usefull
    srinu

  • Extra line at the end of file when transferred from XI to FTP.

    Hi All,
    Need help regarding the below query.
    I have an inbound structure with the below format
    MT_RAVE_L                     1..1 (is the main node)
          Logistic Info                 1..Unbounded (this is the structure under the main node)
                   LOGSOPTUN      1..1 (this is below Logistic Info field)
          File_Name                   1..1 ( This is also below main node with the same level of Logistic   Info structure)
    (Tried to insert a pic of the mapping but was unsuccesful)
    We are trying to move a file from XI to FTP. the file is being created in FTP succesfully but an extra blank line is being inserted at the end of the file.
    After lot of investigation we could trace the it is because of the File_Name field data is being not moved to inbound file.( Here we are using the File_Name field data for creating a file name in FTP. i.e., the File_Name is the File name under which our data is being stored in FTP and that is the reason we are not using File_Name in Content Conversion)
    Can you please suggest ways so that the empty line is not created.
    Thanks in advance
    LRK.

    Hello,
    Have you set the property in  File adapter lastFieldOptional.
    Thanks and Regards
    Hemant

  • How to hide the extra line when use the AI pen tool

    When I use AI CC  pen tool to draw a line, when i click the 1st anchor point,  " - " shows next to the Poniter  ( I did not drag ) ,I tried to move, but  an extra line coming out before I click another point. So I could not draw lines or curves!  That extra line just follow the Pointer  direction.  I am using Window 32 bit,  will it affect this?  please help.

    suetsuetwong,
    Apologizing for my being so slow in the uptake, I believe I have finally grasped the meaning.
    As I now (mis)understand it, you are seeing the (maybe overly) helpful Smart Guides in action.
    You may ignore the line or untick Smart Guides in the View dropdown, or change their settings as desired.
    The Smart Guides are trying to help you with snapping to directions, paths, Anchor Points, whatever, and also telling you where you are.

  • Fix for extra line spacing in code on publish

    Hi Everyone
    Here is a fix for the issue where on publishing using Contribute (CS3 / CS4) extra line spacing is added into the HTML code on publish.  Everytime you publish using Contribute extra line spacing is added between the lines of coding destroying the formatting over time.
    (See attached PDF document for the complete how to step-by-step fix.)
    The issue lies in the line break type defined in Adobe Contribute settings.  Where the web server type, the website is hosted on Unix / Windows, is different from the line break type defined in Contribute's settings under...
    Users & Roles > Editing > Line break Type
    For example:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    <title>Website Tile</title>
    <meta name="keywords" content="Keywords here" />
    <meta name="description" content="Description here" />
    On publish becomes:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
    <title>Website Tile</title>
    <meta name="keywords" content="Keywords here" />
    <meta name="description" content="Description here" />
    (dots are used just to space the text in the forum thread post, they represent blank lines between the lines of code)

    It sounds like you are carrying over a desktop setting that I dont think is editable in iPad pages. It is the before and after spacing around paragraphs. I have been using iPad versions for months now and cant think of the desktop wording in the inspector.
    Open back up in Dekstop pages and see if you can find that setting and reset it to a lower value, or delete the value and resend to iPad.
    Jason

  • Safari inserts extra lines in postings causing formating problems

    I am currently using Safari on the University of Phoenix website as an instructor. Whenever I post a reply to the students and post feedback to them, Safari inserts extra lines in the posting where ever, on when ever, the return key is used. For every carriage return, an extra line is ultimately inserted into the post. Does anyone know how to stop this?

    Please see this thread:
    http://discussions.apple.com/thread.jspa?threadID=1467276&tstart=0
    It might be the logic board, but indications are that it's an overheated graphics card. I have the exact same iMac you do (even with 3 gigs memory upgrade) and have similar problems.

  • Extra Lines in my TOC

    Hello,
    I've tried to look for post about the problem I'm having with creating my TOC in Indesign CS6. When I go to create my TOC it creates my main header, subheader, but then adds these extra lines that starts off with a number then leader dots and ends with the same number or the next number sequence. I've attached what error I'm getting. Anyone have an idea what's happening? Or point me to a thread? Thanks in advance.

    That's pretty strange. Do those numbers appear as paragraphs or isolated stories on the pages?

  • Please Help Xml output with extra lines after removeNodeChild

    Hi guys. I'm having trouble googling this out.
    Here is the problem. Given an xml document. I read it on my app and manipulate it, then save it when I am done.
    When I remove a child, the output files shows all the extra lines from the formatting and indent. So it looks like a big hole in the xml file after the node is removed. Here is an example
    <bookshelf>
    <books>
    <book>
    <isbn>3349583080580584308</isbn>
    <author>Jon Stewart</author>
    </book>
    <book>
    <isbn>9900909770543356488</isbn>
    <author>Stephen Colbert</author>
    </book>
    </books>
    </bookshelf>
    Node parentNode = jonStewartNode.getParentNode();
    parentNode.removeChild (jonStewartNode);The result of this is the following xml.
    <bookshelf>
    <books>
    <book>
    <isbn>9900909770543356488< /isbn>
    <author>Stephen Colbert</author>
    </book>
    </books>
    </bookshelf>
    How can I output the xml without this extra lines?
    Thanks in advance,
    f(t)
    PS: here is the initialization, and configuration of the TransformerFactory, and Transformer, and finally the save method.
         * Initializes factory instances and member variables.
        private void initialize(){
            try{
                //obtain a trasformer factory to save the file
                this.transformerFactory = TransformerFactory.newInstance();
                this.transformerFactory.setAttribute("indent-number", 4);
                //obtain the transforme
                this.transformer = this.transformerFactory.newTransformer();
                //setup transformer
                this.transformer.setOutputProperty(OutputKeys.METHOD, "xml");
                this.transformer.setOutputProperty(OutputKeys.INDENT, "yes");
                //this.transformer.setOutputProperty("{http://xml.apache.org/xslt}indent-amount ", "4");
            }catch(TransformerConfigurationException tcex){
                this.logger.logException(this, "errors.storage.xml.configuringXmlTransformer", true, tcex);
         * Saves the DOM document to the XML file.
        private void saveDocument(){
            //verify that the documents is not null
            if(this.document==null)
                return;
            //sincronize document
            synchronized (this.document){
                try{
                    //normalize document
                    this.document.normalizeDocument();
                    //get a document documentSource object out of the document
                    DOMSource documentSource                = new DOMSource(this.document);
                    //create the file output stream
                    FileOutputStream fileOutputStream       = new FileOutputStream( this.file);
                    //create the output stream writer
                    OutputStreamWriter outputStreamWriter   = new OutputStreamWriter(fileOutputStream);
                    //create the stream streamResult out to the file Stream
                    StreamResult streamResult               = new StreamResult(outputStreamWriter);
                    //performe the trasformation
                    transformer.transform(documentSource, streamResult);
                    //clean up
                    outputStreamWriter.close();
                    outputStreamWriter = null;
                    fileOutputStream.close();
                    fileOutputStream = null;
                    documentSource = null;
                } catch (TransformerConfigurationException tcex) {
                    // Error generated by the parser
                    // Log Error
                    this.logger.logException(this, "errors.storage.xml.saveXMLRepositoryFile", true, tcex);
                } catch (TransformerException tex) {
                    // Error generated by the parser
                    // Log Error
                    this.logger.logException(this, "errors.storage.xml.saveXMLRepositoryFile", true, tex);
                } catch (Exception ex) {
                    // Unknown error
                    // Log Error
                    this.logger.logException(this, "errors.storage.xml.saveXMLRepositoryFile", true, ex);
        }

    I have an rtf template which is used to print output in pdf format. I have a table which has many rows which displays data for each record. In order to avoid breaking the page in between the rows of a record , i have added an outer table with single row and column and pasted the data table inside it and changed the row property of outer table to 'Allow Rows to Break Across Pages' to unchecked. It works fine only if the first record set length does not exceed a full page. IF the first record expanded to more than one page, it leaves a blank page at the very first and start the record at the second page. Can you please advise how to solve this issue. Its very URGENT please..

  • Posted Security Retention Amount in Company Code Currency

    Hi All,
    I want to know how amount is populated in "Posted Security Retention Amount in Company Code Currency" at PO History Table.
    We have created PO with Retention, at the time of MIRO system is showing amount in "Retention Amount in Company Code Currency" this amount is posted in Special GL.
    When we are making payment with Special GL, it is not showing any amount in "Posted Security Retention Amount in Company Code Currency" at PO History Column.
    Any one please help me to understand how the amount is populated in this field.
    Thanks!!!
    Regards,
    Vivek Srivastva

    Hi,
    In PO you can mention the retention amount or percentage, as you told correctly at the time of MIRO it will post seperate line items for retention with spl gl.
    while making payment in F-53, if you dont want to pay retention amount first just do as normal payment but while selecting the invoice you have to select one more line item with retention so that you can reduce the invoice amount while making the payment.
    now you want to make the retention payment . go to F-53 while giving the selection parameters you have to give special gl indicator, then click on process open items. here it will show you the retention amount with spl gl indicator. if its not showing it depends on the layout you have selected.
    check your layout desing.
    thanks & regards,
    shashi kanth. 
    want to know how amount is populated in "Posted Security Retention Amount in Company Code Currency" at PO History Table.
    We have created PO with Retention, at the time of MIRO system is showing amount in "Retention Amount in Company Code Currency" this amount is posted in Special GL.
    When we are making payment with Special GL, it is not showing any amount in "Posted Security Retention Amount in Company Code Currency" at PO History Column.
    Any one please help me to understand how the amount is populated in this field.

  • IF statement inserts extra line.

    I am having problems with IF statements inserting extra lines;
    POH_VENDOR_NAME<?if:POH_PO_NUM != ''?>(POH_PO_NUM)<?end if?>
    Returns:
    Consolidated Supplies
    (1085)
    Instead of:
    Consolidated Supplies (1085)
    I have tried using CHOOSE but get the same results. Any help appreciated.
    Thanks
    Carl.

    Hi Carl,
    Hope your development is going ok. Not sure why the choose wouldn't work with @inline, if the IF statement did. What I would suggest instead is using a series of IF statements. So <?if@inline:x=1?> and the opposite <?if@inline:x!=1?>
    Its a bit of a pain, but I can't think of any other way to get around this.
    Regards,
    Cj

Maybe you are looking for