Basic settings for creating WEBDYNPRO

Hi Friends,
i am new to ABAP WEBDYNPRO....
Before reating a WEBDYNPRO Application...
we need to do any *BASIC setting or Configurations.....*
Please tell me....
because i created a WEBDYNPRO Application.when i tested it ..it is askig username and password ....after it is displaying BLANCK PAGE ...
Please help me..........
thanks and regards,
kumar.

hi kumar......
    these are the settings taht has to be made...
  [link|http://help.sap.com/saphelp_nw04s/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm]
---regards,
   alex b justin

Similar Messages

  • Basic Settings for ABAP Webdynpros

    Hi.
    I am new to Abap Web dynpros... plz help me regarding its setting with basis point of view  to start developing basic applications
    Regards
    Ammad

    Hi ammad !
    I'am also biginner on Webdynpro/abap .
    I followed the following tutorials on sdn. they are very important to start with  :
    Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
    Best-Regards

  • Premiere Basic Settings for MTS

    A bit new to Premiere but coming up to speed fast.  I have scoured the forums and docs for the following basic questions but have come up empty.  However, I am still unclear on what to use for the basic settings for my project to get me the best results.  Basically I want to create the project in Premiere and output it as an NTSC DVD via Encore.  I have .MTS files from a Canon HG21 shot as either MXP (1920x1080) for some projects and SP (1440x1080)  for others and so when I start a project, I:
    leave the Project presets but select the Capture Format as HDV
    not sure what to set for the Sequence presets.
    Would love any guidanceor pointers to the rights docs.  Thanks!

    I guess the HG21 is an AVCHD camera, it definitely is not HDV. You should use sequence settings that reflect the majority of your material. If 2/3 of your material was shot at 1920 x 1080, use that as the sequence setting and just use the rest of your material in that sequence.

  • Basic Settings for BADI

    Hi All,
    I would like to set BADI to transmit contracts from SRM to MM and I am going >>>Customizing under BADi --> Follow on documents --> Create Contract in back-end  but then I do not know how to move.
    Could you please explain me basic settings for BADI.How to set  and configure ?
    Thanks in Advance,
    #Bill J.

    Bill,
    Hi. You would only implement this BADI if you would like to modify the functionality/values of the contract interface to MM.
    To do this proceed as follows:-
    1) Press the execute button (As per you navigation in SPRO mentioned).
    2) Specify an implementation name (Start with a Z or Y) - press enter (You will need a developers key from service.sap.com)
    3) Give the implementation a name and SAVE to a transport package
    4) Select the interfaces table and navigate (double click) on the method applicable (CONTRACT_INTERFACE_FILL or CONTRACT_PROCESS_TYPE_FILL)
    5) Enter the code you would like SAVE & activate.
    6) Go back to the implementation (F3 to go back) and activate the implementation (CTRL-F3).
    7) Test and if this works transport the development through the landscape.
    Cheers
    Rob

  • Basic Settings for Stastical Forecasting

    Hi Guys,
    Could you please provide the basic settings for Statistical forecasting.....
    Regards,
    Pullaiah.

    Hi Pullaiah,
            If you are doing stastical forecasting you have to do following setting,
    1. if you are running forecast engine at aggregated level then while creating planning area, you should define calculation type "p" for forecast key figure (For disaggregating forecast key figure at detail level)
    2.Check the forecastong box while design the planning book in initial tab page.
    3.Create forecast profile under the resopective planning area(/SAPAPO/MC96B).
    This is the basic setting you have to do before running forecast engine..
    Hope this will help you
    Regards
    Sujay

  • What are the basic steps for creating a content repository?

    I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
    If anyone knows of any guides that show a step by step process that would be great too.
    Thanks
    Paul

    Hi Paul
    First of all you need to create a new repository
    Suppose you want to add all the documents under folder Paul under C: Drive
    (Even you can put whole documents of C: drive into Paul)
    Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
    There you can create a new directory by clicking on button New
    Give the parameters as follows :-
    Name               :           Anything you like
    Description       :           Anything you want
    Prefix (must start with /)  :  Probably same as your repository name like \Paul
    Lookup mode : caseless
    Root Directory   :  C:\Paul
    NOTE:  This is the trick. You need to give the proper path means folder path which you want use as repository)
    Repository Services  :  Any services you want
    Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
    Security Manager         :           AclSecurityManager
    ACL Manager Cache   :           ca_cm_rep_acl
    The save it
    Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
    I think the above information will help you. If still you have problem, please feel free to contect me.
    Regards,
    Chamkaur

  • Basic Settings for Lifecycle planning

    Hello All,
    I want to maintain the basic settings of Life Cycle Planning to use Like Profile
    Transaction: /SAPAPO/MSDP_FCST1 - Lifecycle Planning
    My question is; is it a must to use 9AMATNR and 9ALOCNO characteristics in our POS?
    I have seen the sentence below in OSS note: 354660
    **If you are using a characteristic for a product and do not want to use the 9AMATNR characteristic, you must specify the characteristic you would like to use.The 9AMATNR characteristic must exist in the planning object structure if you want to use it as a characteristic for a product.Only then can a LIKE profile be used.In this regard, see the information on the /SAPAPO/FCST_LIKE user parameter in note 350065.**
    What I understand from this sentence is that 9AMATNR is not an obligatory characteristic to use in POS for the purpose of life cycle planning.
    However when I do not use 9AMATNR I receive such an error message during the maintenance of Basic Settings for Life Cycle Planning.
    *Errors have been found in your Customizing settings
    *For detailed information, see consulting note #354660
    *The basic settings cannot be saved
    *Characteristic for product 9AMATNR is not in the planning object structur
    So, does anybody know if is it a MUST to keep the 9AMATNR in the POS for lifecycle planning? May be I am doing wrong something else...
    Thanks in advance

    While in DP MPOS you are free to choose custom characteristics for location and product, there are certain DP functionalities like Promotion Planning which normally uses 9AMATNR as characteristic for Product. In such cases the DP MPOS in absence of 9AMATNR has an issue. Through this assignment of location and product in the MPOS, system knows the custom characteristic that needs to be mapped to 9AMATNR and 9ALOCNO for product and location.
    This is useful during release from DP to SNP also.
    Hope this helps.
    Thanks,
    somnath

  • Basic Settings for new BW QA Box

    Hi All,
    i got a problem in BW QA.
    The BW QA server was a new one. I have created new requests for all the master data infosources and transported them sucessfully.
    The problem is when i opening the infopackage which was transported to QA i am getting a popup with "Caution ! - The transfer method has changed" and when i see in the infopack the processing method was changed to ALE and i could'nt see the PSA option there. The infopack in Dev was with psa.
    This is the case with all the infopacks in QA.
    Do i need to do any settings as this is a New QA box.
    Can anyone send me the basic settings need to done for the new BW qa box document.
    Thanks in Advance
    Appreciated with Rewards

    Ram,
    have you created the source systems in QA - that should be done and when you transfer - make sure you have also transferred the datasource ...
    Arun
    Hope it helps...

  • Photoshop Elements 10 - Proper Settings for Creating Graphic for Film

    Hi, I'm fairly new to Photoshop Elements. What would be the proper project settings and export settings when creating a quality graphic for using in a film? (I'm using Premiere for video editing.)
    Thank you so much for your time and patience. I've been referring to google and haven't pulled up anything yet, not sure if I'm just not putting in the right terms.
    -M.

    Hi,
    Here are some links of Adobe tv and Elements help page to get more about this application.
    http://tv.adobe.com/show/learn-photoshop-elements-10/
    PSE 10 help
    http://help.adobe.com/en_US/PhotoshopElements/10.0/Using/index.html
    PSE 11 help
    http://helpx.adobe.com/photoshop-elements.html
    thanks,
    earth-star

  • Where do I change the dpi settings for creating a jpg in Bridge CS5?

    I upload jpgs to an online site to be viewed in a browser. I've been using Bridge CS5 to batch process the jpgs from high quality pdfs.The settings I see when I do the settings to create the jpgs will only give me Maximum settings and the option to set it on 12 but when I open the jpg that's created in Photoshop, it's still 72. I would like to have at least a 150 dpi setting. I've searched and can't find any help online. What am I doing wrong, or isn't there any place to give me the option to change the settings to a higher dpi in Bridge? If this isn't possible, what do you suggest to make the process go faster? I'm using the Adobe CS5 programs.
    Thanks in advance for any help.

    "Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers.  (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
    What are the sequence of steps that you and your batch processing take from Bridge?
    You can use call Photoshop's Image Processor from Bridge to create the jpeg files  (Tools > Photoshop > Image Processor).  In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display).  In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

  • A mac basic settings for FinalCutStudio

    Hi.
    I'm planning to buy a mac for editting with final cut studio.
    I'm not so sure which one is the best in my case (macbookpro, Imac, MacPro).
    I'd like to know finalcut ussers opinion: what are the basic settings a mac must have to operate real nicely FinalCutStudio?
    Thanks

    Actually, neither FullHD.
    FullHD is like Sasquatch.
    5D is highly compressed h.264 video, which is mpeg-4 compression.
    EX3 is XDCAM, which is mpeg-2 compression.
    Not that the cameras can't produce pretty pictures, but they're not FullHD. What is FullHD anyway? If I owned Aiwa, I'd start working on the crappiest camera I could make and call the format "FullHD" and everyone would buy it.
    Either camera will produce footage that can easily be transcoded to ProRes or ProRes LT for a smooth post production workflow.
    Sounds like you want a MacPro.

  • APO - Basic settings for setting up the system landscape

    Hi,
    I have a, hopefully small, issue regarding setting up the system landscape for our APO - R/3 environment.
    In our test system in R/3 I need to specify the APO release, which is not a problem. The issue I have in R/3 is when I try to save the new setting. The system asks for a workbench request even if the test system has been "opened" by the Basis resource.
    I would like to avoid creating a workbench request as we are using an external tool ( HP PPM ) for transport management and I believe I will get into trouble since this workbench request should not be transported further into our production environment. As I have understood from our APO experts the settings must be maintained per R/3 system (development - test/quality - production) as it is pointing to corresponding systems in the APO landscape.
    The question is, does anyone know how we can maintain these settings without any workbench request being created?
    This is perhaps not a APO question, but I'm not sure in what other forum I should post it.
    Thanks for any feedback
    Br,
    Lars

    Lars,
    I have difficulty envisioning any situation when you would wish to make any transportable change (workbench or otherwise) in a test system.  The normal path would be to transport the change from the dev system into the test system.  I am unfamiliar with the third party software (HP PPM) about which you speak.  However, the standard controls currently used in your transport process (third party or otherwise) should limit which transports do and which transports do not get moved into your prod system.
    I can think of several ways to approach this problem.  I think you should consult with your supervisor before attempting such changes, to ensure that you are complying with all policies and procedures that exist for your company.  In my company, this type of exception would require creation of special change management docs, and appropriate signoffs by management.
    You are right this is not an APO question, it is a Basis question.  For advice on the technical aspect of your question, try one of the Basis forums.  Pick the one that is for the DBM you are using.
    http://forums.sdn.sap.com/index.jspa?categoryID=1#34
    Best Regards,
    DB49

  • Best Acrobat distiller settings for creating a Web-Friendly pdf file-

    Hi
    Got a big project coming up where my crew will be trying to export our indesign layouts for print pieces to pdf files for uploading, viewing and printing from our company internet site. Our documents will be a mix of text and jpg and vector images, as they originally designed for printing. We'll be reformatting them to print on letter size, etc., then saving them for our web dev area.
    Is the standard job option set, "Smallest File Size", the best way to go?
    Or are there specific settings that I can customize in Acrobats (resolution, downsample to, monchormatic, etc) in the blanks and create a set of job options to distribute?

    Hello,
    We're pleased that you are using Acrobat software. The Smallest File Size preset is great for web and email. However, image resolution is low, which would affect printing quality. The Rich Content PDF preset might be a better choice. Did you look on this Help page for information?
    Adobe PDF presets:
    http://help.adobe.com/en_US/Acrobat/9.0/Professional/WSA79FA899-BC95-401e-BD44-5B26BC31B36 9.w.html
    You can also create your own settings file. Here's the Help page:
    Customize Adobe PDF settings:
    http://help.adobe.com/en_US/Acrobat/9.0/Professional/WS58a04a822e3e50102bd615109794195ff-7 f10.w.html
    If you need more information, I suggest you go to acrobatusers.com and search for information or ask your question on one of their forums.
    Best Regards,
    Adobe Community Help

  • AC settings for creating Adhoc wifi for few notebooks

    I have to create an adhoc wifi for about 3 or more notebooks. I know it´s possible, but i don´t know how to config Access connections. I pass throw many menus, but it need to set up IP, mask, gateway, and DNS. What i have to fill into this columms?
    P.s. excuse me and my english, i am from central europe

    lmosley wrote:
    If you want to go into technicals this may help explain
    But in basic terms WEP is the old wireless encryption standard that now is less secure than the newer WPA encryption standard. Thats basically the difference Its why I cant understand why nintendo insist that the ds can only use a WEP conenction?
    So insecure it can be cracked in less than 5 mins so not worth having. Best if possible to get a CAT5E cable for it, they are cheap enough for any length on ebay.

  • Optimum Settings for Creating .MOV for Web

    Hello,
    I shot my video footage using a Canon XL-1 with a MiniDV tape. I then loaded this footage into Final Cut Pro (Version 4), running on MAC (Version 9.0), and then completed my editing. Besides creating a final 42-minute version to be shown on television, I would like to break up this 42-minute version into three separate pieces (a 21-minute, an 11-minute, and a 10-minute slice) for Web/Internet delivery.
    To do this, I will create three separate .MOV files; however, I would like to know the 'OPTIMUM' configuration Final Cut Pro settings/considerations before creating these .MOVs for optimum audio/video quality when shown on a website. By the way, after I produce these .MOV files, I plan to encode them using FlixPro's ON2 V6 Codec to finally produce Flash 8 .FLV files for uploading to my web server.
    Any and all advice regarding optimum Final Cut pro settings/considerations before creating these .MOVs would be aprreciated immensely!

    Thank you for your reply. I take it then that current default settings are OK.

Maybe you are looking for