BCS: Manual posting customizing

Hi Everybody!!
While I was launching a manual posting task for interco eliminations a dump error has occurred. Below, I attach the dump message:
<i>Runtime Errors         DATREF_NOT_ASSIGNED
Error in the ABAP Application Program
The current ABAP program "CL_UC_MANUAL_DOCUMENT_GUI=====CP" had to      be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis
    There was an attempt to access a data object via a 'NULL' data
    reference (points to 'nothing').
    A data reference must point to data object before it can be used to
    access the referenced data object.
    The reference was either never set or it was set to 'NULL' using the CLEAR statement.
Trigger Location of Runtime Error
    Program                                 CL_UC_MANUAL_DOCUMENT_GUI=====CP
    Include                                 CL_UC_MANUAL_DOCUMENT_GUI=====CM00J
    Row                                     19
    Module type                             (METHOD)
    Module Name                             IO_CONVERT_DATA</i>
I has customized a document type with posting level 20 and manual posting.
Please, any idea related to it will be wonderful!!
Thanks in advance!!!
Gustavo

Hello Julia,
BCS 6.0 need to have implemented a lot of notes or at least 6.0 level 10.
Otherwise you will have dumps e. g. after execution of tasks.
I dont know whether it solves your problem but I gues it will solve it.
We had dumps here after execution of a task as well before we updated to level 10.
you find messages concerning those dumps here:
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1061549&_NLANG=D
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1039847&_NLANG=D
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=960471&_NLANG=D
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=967854&_NLANG=D
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=999008&_NLANG=D
regards
Eckhard Lewin

Similar Messages

BCS Manual Posting Task

Hi All,
I need help with creating a manual posting task in BCS as I keep getting a short dump. I am using SEM 6.
I have created a Manual Posting Task with description, cons frequency and doc type. I have created a doc type for manual posting and made selections for the properties. Is there anything else that I need to do?
When I try and execute the task I get a short dump: MESSAGE_TYPE_X. These are the other key words listed in the dump: SAPLSLVC, LSLVCF01 or LINE_OUT_NEW_2. I have looked for SAP Notes but can't find anything relevant.
Please tell me if there is other configuration I need to do.
Many Thanks,
Julia

Hello Julia,
BCS 6.0 need to have implemented a lot of notes or at least 6.0 level 10.
Otherwise you will have dumps e. g. after execution of tasks.
I dont know whether it solves your problem but I gues it will solve it.
We had dumps here after execution of a task as well before we updated to level 10.
you find messages concerning those dumps here:
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1061549&_NLANG=D
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=1039847&_NLANG=D
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=960471&_NLANG=D
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=967854&_NLANG=D
https://websmp108.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=999008&_NLANG=D
regards
Eckhard Lewin

Manual posting for returnable packaging ( RL11)

Hi
Iam supplier of OEM
I have created returnable packaging account with following details
Location - My plant
Exchange partne - OEM (sold to party)
In relationship --
Main -- Type plant Location plant number / Exchange partner---- type customer - sold to part number
sub relationship -- Type plant Location plant number / Exchange partner---- type vendor-vendor number of OEM
I want to do manual posting after doing delivery to customer.
Please guide me about step by step inputs to be made in transaction RL11
Iam new to returnable packaging

Hello,
normally the posting should be made in background automatically when the packaging material is used in the delivery note.
To post a manual record, you need to insert at minimum the following in the RL11:
- Movement type 811
- Material number
- Quantity
- Reference (your delivery number)
company code
and the locations (e.g. plant and customer)
see attached screenshot.
If everything is correct you get a green check symbol at the beginning.

Manual posting at level 20 - number of lines available in cons monitor

Hello,
I have a question concerning manual postings. We have created a document type and a task for manual postings connected to intercompany eliminations (posting level 20). In the monitor, the users only have 10 lines available for the manual posting and I have not been able to figure out how to increase the number of lines. Has anyone else been able to get more than 10 lines, or is that a limit?
Thanks in advance!
Kerstin

Well, that would be great - but I tested it and I couldn´t make it work? I will try this with my customer again tomorrow, if we can´t make it work I hope it´s OK if I get back to with a follow-up question?
Kind Regards,
Kerstin

Check whether the document text is filled in the manual posting document.

Dear BCS experts,
Our client would like to have a check whether the document text is filled in the manual posting document.
Do you have any ideas how it is possible to implement?
Thanks.

The probelm is solved. I implemented the validation of document header with a condition function.

Post Customs Document via /SAPSLL/API_CUSTOMS_DOC_CREATE

Hi Gurus,
We are trying to post Customs document Via FM /SAPSLL/API_CUSTOMS_DOC_CREATE. Is there a better way to post Customs document via program/manually?
can any one provide a sample program to create/change Customs document via program?
Regards,
Abhi.

HI Abhshk Bhatta,
do you have any experience with the connection of a non sap system to sap gts?
my idea is to use to call this function module e.g. via a web-service and post the customs declaration into gts....
what do you think - may that be possible?
regards,
Ralf

Task-- Manual Posting

Hi,
I am trying to maintain the Document Text which fall under a task in the considation monitor UCMON.
In UCWB -> task -> manual posting where settings are maintained I am able to view all the other settings except this Document Text field.
I am trying to allow Document Text to display some user defined values in which will be shown when user click F4.
Where can I maintain the Document Texts as I do not see it in UCWB as a setting.
Please advice. Thank you very much.
Edited by: Tan Chee Ong on Feb 14, 2008 2:49 AM

The document header text field automatically included for manual documents.
If you are referring to the comments tab of manual postings, the setting to activate this is in BW. To activate in BW workbench, go to the BCS Characteristic(s) for which this is to be associated with and select the checkbox "Characteristic is document attribute".

CO - AutoPost and Manual Post

Dear All,
I have a question about Cost Element Cat - 12 and Value Field of Auto Post and Manual Post.
In original design, I have a GL account which is from SD, Cost Element Cat 12, mapped to 1 value field. In KE30 report, value display with '-' sign.
Now, users want to have manual adjustment on this account. I think I will not turn off the AutoPost only flag in FS00. But I would like to create another Manual Account for this, on the other hand, I don't want to create a new Value Field for this Manual Account. Is that possible group Auto and Manual Account into 1 value field ? I did a testing in QAS, the figure in KE30 is not match with FS00. Since, the sign for AutoPost Account and Manual Post Account is different from CO side ? Any work around soultion ??
Thanks a lot.

Hi,
You can assign different condition types to a single value field.
You can also assign two GL accounts to one value field. For this, you need to have the corresponding cost elements in a row or you need to have a group of such cost elements so that you can assign the group while defining the source in PA Transfer Structure.
Sometimes, there will be a difference between the KE30 value and the gl account balance value because, noramlly you view the gl account balance company code wise, whereas the KE30 report may show the value for a segment, which may be different from company code. (for ex, segment may consist of company code, customer, product, etc.)
Hope this will be of help to you.
Cheers.
Dhananjai

Error while posting Customer with Multiple sales areas using DEBMAS05.

Dear experts,
We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05. we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error: "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created! The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization). OSS Note (384462) provides further details about this. One Important point from the note is:
"As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
For your customers, contact persons exist to which a private address or a different business address is assigned.".
This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
If someone have experienced the same issue before and have found a solution to it, kindly help out.

I have found the cause and solution to this problem.
This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
This was resolved by splitting the IDOC into 2.
The solution is to First post only the KNA1 segment and create the customer.
In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”: you would have got the KUNNR after the first step.
Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC.
I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
Cheers
Venkat

PCA Manual Posting - Open/close posting periods

All,
Is there a way you can open or close PCA posting periods? The FI posting period control does not control the PCA manual posting. We need however to do this. Is there a way to do it. I know I can create a validation. But is there any other way?
Regards,

Hello,
here is the one and only correct answer for your question:
Unfortunately, there is no possibility to lock periods / posting
transactions in PCA (including distributions).
There are only two possibilities to prevent postings to profit centers:
1. is to completely lock them in the master data via transaction KE52 (tab 'Indicators' -> activate 'Lock indicator'. Please read also the F1-help here for the field 'Lock indicator')
2. to lock one complete fiscal year in the entire Profit-Center
Accounting via transaction 1KEF.
One important reason is that PCA receives its postings from preliminary applications like MM, CO, FI. Therefore, postings can only be locked in those applications (like in FI via TN OB52 or in CO via TN OKP1 or FI-SL via GCP1), but not directly in PCA.
Excpetions from that are described in the SAP notes 436384 and´836218 for manual postings made with transactions 1KEL and 9KE0. With the coding corrections of the both notes a period lock is possible for these two transactions.
It is not planned to have a general functionality of period locks in Profitcenter Accounting. PCA should be always open for postings. It is designed to be the receiving application of data delivered by the preliminary applications. Therefore period locks must be handled / maintained also in those applications.
Best regards,
Andreas

Clear Withholding tax data while posting customer invoice

Gurus,
I am trying to post Customer invoice document using FB01 transaction.
If the customer has with holding tax information available in Customer Master the corresponding information is getting posted into invoice document.
Is there any user exit, enhancement or substitution available to clear this with holding tax data.
Please do share if any code examples on this issue.
Appreciate your quick response.
Thanks,
Suneel

Dear AMD008
were you maintain properly in OB40 MWS (out put tax) relevant GL Account
Note: are you using NEW GL please conform me
Regards
shankar

FI,Post Customer Down Payment

can any one give me the BAPI for POST CUSTOMER DOWN PAYMENT : HEADER DATA transaction F-29 and BDC program for poasting the same?

These might be of some help too :-
f-29 document header
Down payment request: posting using BAPI_ACC_DOCUMENT_POST

Bapi for 'post customer down payment (t-code F-29)'

hi all
can any one tell which bapi is used to 'post customer down payment:header data (t-code F-29)'.
thanks in advance,
lokesh

Hi,
this one :
BAPI_ACC_DOCUMENT_POST
Best regards,
Erwan

Posting Customer Invoice using FB70

Hi Experts,
While posting customer invoice (FB70) for the customer having withholding tax information defined, I am able to simulate the transaction successfully but not able to post it.I can see the TDS transaction executed.But, the post icon symbol is inactive. It displays " error messages still exist" . When i checked the error log it displayed Message number 047 in the application area F5A.
Please help me
Regards,
Sasidhar

Hi
In accounting document posting - system not shows any specific error log.
In your case, the error might be any of the below :
- check whether the balance of the all line items is zero
- check whether the WHT calculation is correct
- check whether the customer invioce amount is entered
VVR

Manually Posting costs to AUC

Hi Experts,
A) In Old server:
A1. There is some cost in AUC, which has been partially settled from WBS Element to the Asset no. of AUC.
B) New Server:
B1. The cost available in AUC of old server has to be migrated in a new sever. And then same cost has to be settled from AUC of New server to the fixed asset of new server
Problems:
1. How to manually post the costs in Asset no. of AUC of new server?
2. There is no cost line item in a WBS element of AUC of new server. How to define a settlement rule (from AUC to Fixed Asset) for a such a kind of WBS element?
Kindly do the nedful
Thanks and Regards,
Satya Vani.

Hi,
As far as my knowledge goes when you have a two step settlement i.e, Prliminary to AUC and Final to Main assets, all the actual costs have to be posted to AUC periodically and before close of Asset year. Once asset year is closed system will not allow you to post previous year's costs to AUC in the current year.
A work around will be to create a duplicate WBSe transfer all the unsettled costs to it and continue with the settlement.

BCS: Manual posting customizing

Similar Messages

Maybe you are looking for