Benefit - EOI configure
Hi,
How to configure to have the infotype 168, with the following fields defaulted and flag?
a) Statement Required - flag
b) End of Grace Period - defaulted a date
c) Locked record
I have Define Evidence of Insurability Conditions:
a) Action field - set to 2 (create a pending record for the chosen option
b) Grace Period - set to 45 days
Perform the enrollment of the insurance plan via HRBEN0001. But the above the statement required is not flag, end of grace period is blank and record not locked.
Thanks
Nikki
Regardless of what value you configured for EOI action (e.g. create active rec, create pending record, ...), if it determines that
EOI is required, EOIRQ field in IT0168 WILL be flagged (SAP standard).
As for choosing option '2' to create pending (locked) record, this logic is ONLY applicable if the record is created through ESS (Employee Self Service), and not within SAP GUI environment (i.e. logic to lock record if EOI is required is done through SAP function 'HR_BEN_GENERATE_INSU_EIO_SELEC', and this function is only called if ee's is enrolling benefit through ESS). I aslo noticed this behavior earlier, and don't see any SAP documentations mentioning about this neither.
Similar Messages
-
What is the benefit of configuring the XSS Homepage Framework for ESS
What is the benefit of configuring the XSS Homepage Framework for ESS?
Over using standard iViews.It means you can disable (or enable) the exact functionality your customer needs rather than sticking with the default implementation.
Most customes do not use everything available from ESS or MSS. Switching it off (making it unavailable) is WAY better than leaving potentially unconfigured content to be accessed by users. SAP generally do not handle the error cases and you will get lots of nasty stack traces .....
Haydn -
Benefit - Question on EOI configuration for Insurance plan
I have a question related to Evidence of Insurability under Insurance Plan.
The requirment is that when an EE enrolls into an Insurance plan within 30days of DOH then EE doesn't need to provide EOI otherwise if EE enrolls into the plan after 30days then its mandatory to provide EOI. Could you please help me on how to set this condition when configuring EOI?
Thanks,
Raj.Hi DF, Thanks for the comment.
Actually the requirement is, the EOI to be provided by EE is determined by DOH. Under garce period it determines the period when the EE should return EOI.
In our case, the EE don't have the provide EOI when they enroll within 30 days of DOH and they must provide if they enroll after 30days. -
Configuration Guide for HCM BENEFITS
Hi,
Could anybody point me to Configuration guide for HCM Benefits for SAP BI or BW ? whats the documents title/number containing necessary HCM Benefit analysis configuration ?
Thanks in advanceHi Raj,
Try this link:
http://help.sap.com/bp_hcmv1600/BBLibrary/Documentation/N06_BB_ConfigGuide_EN_US.doc
Cheers,
Tanish -
Any benefit to free subscriptions outside of Newsstand?
Situation: We have a client who will publish free folios to a free multi-viewer app. The client wants the app to live outside of Newsstand.
What we know: Free folios show up in the app as soon as they're published. But, Apple offers the ability to configure free subscriptions.
Our question: What's the benefit in configuring free subscription for non-Newsstand apps? Or, does Apple simply require free subscriptions for free-folio/free-multi-issue apps to live in Newsstand?
Thanks, as always.
Josh PenrodApple created the Free Subscriptions option specifically to enable apps with free content to work in Newsstand. I see no benefit in setting up free subscriptions outside of Newsstand, and I don't even know if it's possible.
-
Hi
We have started using several PJCs to enhance our 10g webforms. The conversion has not gone live and I need to decide how to deploy the PJCs.
The 2 options that I can think of:
1. Have all PJCs packaged into one jar.
Pro - no need to change formsweb.cfg every time a new pjc is used
2. Have separate jar files for each pjc
Pro - Easier to maintain each pjc e.g. if one changes just have to test that one rather than all as with above deployment
- Reduce jar download quantity. Form will only download jar files required rather than one large jar file
Has anybody been through a similar process?
Any thoughts/comments are appreciated.
thanks
paul schweigerHi,
I think option 2 is preferrable. However, I don't see any benefit in configuring all jar files with an application.
One thing I haven't tried yet, maybe you want to try it for me and le me know if it works
Say you have common PJCs and application specific PJCs. You may be able to define
commonPjc = pjc1.jar, pjc2.jar, pjc3.jar
Then in your application specific archive definition you do
[myApp]
form=...
<the archive tag> = frmall.jar,%commonPjc%
It works for other configurations and may work for PJCs as well. This way you have a common configuration (similar to a big monolithic jar file) that you can use for each application definition). Additional, application specific jar files can be added to teh application definition
Let me know if thsi works
Frank -
Enrolling benefits for an employee
Hi all,
Please can anyone provide me the screen-shots for enrolling benifit plans for an employee using T-code 'HRBEN0001'.
TKS in advance,
DharaniHi Dharani,
HRBEN0001 is for Enrolling an employee to the Benefit Plans configured in the System.
Screenshot for enrolments? anyway, you can google to find tonnes of information on the same..
Best of Luck !!!
Kumarpal Jain. -
ESS - NWBC - Benefits Service Missing
Hi Experts,
We are on ECC 6.0, EHP 6. We are using NWBC for ESS/MSS.
We have assigned standard SAP roles for ESS.
We don't see Benefits Service under Benefits and Payment. We do have assigned required roles for Canada.
Any idea, what is missing on the role side?
Regards,
AshishAlso make sure you're using the correct role. SAP_EMPLOYEE_XX_ESS_WDA_3 is delivered with EHP6 and it includes the required menu setup. We're in the U.S. and it included country grouping 10 and 99 versions of the new Benefit services for us.
Also, the HRESS_A_BENEFITS_ENROLLMENT web dynpro application is driven based on system configuration and benefit adjustment reasons. For example, Open Enrollment is only available in the ESS menu if the Open Enrollment period is open in the Benefit IMG configuration. Otherwise it's not available in menu when an employee logs in. -
BPEL Preference v/s DVM Lookup
Hi All
Please suggest when it is appropriate to use BPEL Preferences and in which scenario DVM is better?
Can I use the following as my guideline or should I always go for DVM. Is there any performance benefit?
Configurable Values
Dynamic based on Input : DVM Lookup
More or less static but
changes per environment : Preferences / Properties
Regards
Prasad JayakumarHi,
You can use any of them as they serve the same purpose. But DVM are mostly for functional users and BPEL preferences are a bit technical and also BPEL preferences are not available for other components like in mediator.
Ajay -
Benefit Plan Enrollment requiring EOI, existing Benefit pan is delimited
Hi Everyone,
Here is the situation...
When an employee changes his/her benefit plan and enrolls into a
benefit plan requiring EOI, the existing benefit plan record is
delimited, it puts an end date to the existing plan. We would like to keep the existing one active until the pending one get activated when we receive the EOI.
Do you have any ideas?
Thank you!@Andre
Here is ONE way I have seen it done (a more elegant solution might be possible via User-exit/BAdI/workflow. Several moving parts here so bear with me....
(1) Employee goes online and selects coverage that requires EOI. Say that the max without EOI is $250,000 and the max with EOI is $500,000.
(2) On the screen that shows that coverage, verbiage is added to the effect of "The selection you made requires EOI. Your requested coverage will not be valid until EOI is provided and approved. However, during this transition, you will be covered up to the maximum of $250,00 until time that EOI has been approved."
(3) Nightly, a batch process runs that looks for newly created records with the EOI flag empty (since the employee can not set this themselves, the record will show that it is still needed). At that time, the batch program performs the following...
(4) In the background, the first is for the $500,000 coverage amount but is flagged "locked/inactive". A second record is created for the same dates but for the $250,000 coverage amount....therefore, the employee is in fact covered to the max w/o EOI.
(5) Since there can now be a lag in time....Upon receipt of EOI and approval, an HR admin goes in and deletes the second "hold" record and remove the flag/lock on the original record.
Make sense? -
Steps to configure benefit enrollment ess?
Hi experts,
I am a student and i am new in sap hcm employee self service.
May i know if any expert has any steps to configure and link benefit in sap to sap enterprise portal using ess?
For examples, i do not know how it link to sap enterprise portal using ?
Thanks.
Cheers,
xyDear,
First of all please make sure your adjustment reason has been configured correctly in the IMG, specificcaly the following node
Administration ->Flexible administration -> Define Administrative
parameters.
As well as IMG->Personal Management->Employee Self Service->Service Specific
Settings->Benefits and Payments->Benefits->Set Up ESS Parameters. Please make sure that the validity dates are correct. and finally
Benefits -> Flexible Administration ->Define Adjustment permissions
If your configuration is correct please have a look at the following
1. Please maintain a value for "URL of PCD Page" in the resource table V_T7XSSSERRES for key EMPOYEE_GENERICENROLLMENT_SERVICE05.
2. Another reason for the page not being displayed could be due to authorizations. See that the user has authorization to view this page.
Best Regards,
Deepak.. -
HRMS Configuration Workbench - Upload FSA Benefit Elections
Using HRMS Configuration Workbench to upload benefit elections I receive ORA-01403 when trying to load an amount for a FSA plan. I am entering the amount in the "Benefit Val" column on the upload spreadsheet. The following error is generated:
ORA-01403: no data found ORA-01403: no data found in Package BEN_ENROLLMENT_PROCESS Procedure CREATE_ENROLLMENT. The DataPump produces an error whenever an amount for an FSA plan is specified. If FSA plans are set to "Declined" then the Datapump elections are successfully updated.
Our FSA plan has a Standard Rate configuration with "Calculation Method" = "Set Annual Rate Equal to Coverage" a "Coverage" calculation is specified, and the "Calculate Enrollment" box is checked. Our "Coverage Calculation" screen has a "Calculation Method" = "Flat Amount" and the "Enter Value at Enrollment box checked.
Can someone offer some advice?1. Is this still and issue for you?
2. Did you log a service request with Oracle Support. If so, what is the SR number?
Regards,
Greg -
Is there any benefit to installing anti-virus software on the Windows side of the Boot Camp configuration?
The advantage is the susceptibility of Windows systems to viruses and passing those along. While they may not affect, or infect, a Mac OS X systems, thy can be passed through to others.
-
About the benefit configuration
where we need to configure form and driver program of the benefits in script.......
can any one tell em the answer.....i need some more inforamtion how to execute the form with the tcode of hrben0001. in this which one we need to select the for the output....
like we have standard dental form or standard medical plan, or employee assistance program or
ltd or ep01....
in these we have sub structure like
for standard dental plan.....
1) option
2) Dependent coverage plan..
3) ee pre-tax
4) er costs
5) payment model
6) dependents........
..like this we have for the standard medical plan or epo1 or ltd or pension or 401k
in these which one we need to select for the output type ........................... -
Benefit of 'ProcessControl' field in Shipment Type configuration
Dear Gurus,
what is the benefit of 'processcontrol' field in document content section under Shipment type config?
how to make use this field? pls kindly help.
thanks.
rudy.hi ,
Seem this 'ProcessControl' field is not have restriction or control even when i use it for collective or individual process (either one or many mode of transport). how do i see this control restriction ? which scenario?
Regards,
Rudy.
Maybe you are looking for
-
I purchased an Ipod Nano from someone yesterday. How do I register it in my name and unregister the previous owner. I have a 4th gen Ipod touch and was told I could add songs from my library to the nano but we can't seem to do anything with it. HELP
-
I've had my farm upgraded from SP2010 to SP2013 for over 6 months now and all is well, however, I was refreshing my staging environment from production and I noticed that one of the databases still shows these errors when I run test-spcontentdatabase
-
Hi Team, I am working on PP repetitive manufacturing process. In one of the SAP document it has been mentioned like, if it is complex production line, create line hierarchy. What is line hierarchy? What is the difference between line hierarchy and pr
-
It means that I am unable to read all the information being displayed,such as my email,I cannot log onto it with the password as it is off the screen where the whole page as moved to the right of the,it appears to stretched.
-
Access to Enterprise Services Repository (ESR)
Hello, how can I access an ESR from a simple java console without having to use the Enterprise Services Builder? - Is there an API available? - Can somebody point me to a "best practice" for working with the ESR by using Java? Thx a lot!