Benifits help:error Message no. HRBEN00FMODULES218

Hi,
During enrollment i get the error message.
Calculated processing end date is before the start date
Message no. HRBEN00FMODULES218
Does anyone know why this message appears. The benefits adjustment reason has
Start date: Date of offer
End of records: End of time radio button.
Am not sure why the message appears.
Any assistance is very much appreciated.
Thanks in advance
Jason

I was able to figure out the answer eventually

Similar Messages

Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

Hello chae84swangin,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

Please Help - Error message when trying to open itunes

Hi
Can someone help pls? I was in the middle of upgrading my version of itunes and my computer crashed. Now when I try to open itunes I get an error message as follows: 'iTunes has encountered a problem and needs to close. We are sorry for the inconvenience'.
I don't know what to do! I am worried I have lost all of my music!?

hiya!
'Quick time failed to initialize. Error # - 2095. Please make sure QuickTime is properly installed on this computer'.
okay, let's try a careful standalone QT reinstall:
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

Please help: error message says ipod cannot be read from or written to

Hi
I have been using my iPod Video for a couple of months now without any problems, until yesterday. I tried to sync it after I downloaded a couple of new songs when I got this error message: "Attempting to copy to the disk 'Jason's Ipo' failed. The disk could not be read from or written to."
The 'Jason' in 'Jason's Ipo' is me.
Any help would be very much appreciated!
2002 PC Windows XP

Thanks, that was helpful.
While I was waiting for your answer I restored my iPod to its original settings. The screen is now black and white and the font changed to something smaller. Is this normal? How do I put the playlists and songs back in? Please post a link if there is a page on this subject.
Thanks again.

PSE 10 "help" - error message re Adobe Air

I am unable to access the PSE help within PSE 10. Each time I get an error message indicating that the problem relates to Adobe Air and that I should re-install it (Adobe Air). I have tried re-installing both Adobe Air and PSE10 but the problem persists - any suggestions
Thanks Dave
PS OS Windows 7 prof (64bit)

A clean re-install should have solved it.
I'd do these steps:
Close PSE.
Use Task Manager's "Processes" tab to kill any running Adobe or PhotoshopElements processes.
Use the Control Panel to uninstall Adobe AIR.
Reboot.
Get the latest version of AIR from here:
http://get.adobe.com/air/
Install AIR.
Ken

Please help--Error message in PSE 7

When I open PSE 7 I'm getting an error message that says:
Microsoft Visual C ++ Runtime Library
Runtime Error Program....Adobe Photoshop, etc
This application has requested the Runtime to terminate in an unusual way. Please contact the application support team for information.
and a couple times the message just says Adobe Photoshop has stopped working and must close.
When I click "okay" the entire program shuts down.
This started about 10 days ago. I uninstalled the program and re-installed and it worked okay. Now today the message is back again. I've tried unplugging everything, restarting the computer and nothing is working. I am using Windows Vista.
Please help.
Thanks, Doris

I do not know enough about my computer etc. to
follow the troubleshooting
information that you referenced. But I was able to check my system
information and everything was okay in that area. I've been using
the PSE 7 program for almost a year with no problem until now. Is there some way that I can talk to
a "real live" person to get help. Thank you for taking time to try and help me. I'm just not computer savvy enough to follow the instructions as given.
Thanks,Doris

HT201210 Please help - error message saying 'filmware file is not compatable', and videos will not transfer from phone to computor. what can i do?

As title says, I keep having this error message 'filmware not compatable' and my videos will not load.
Can someone please help this very non-tech-savy lady???!!
Cheers in advance

Bad news: It sounds as if you were sold a jailbroken iPhone.
Good news: File a SNAD with eBay. Make sure all your correspondence has been through eBay Messaging. The fact that the seller has been ignoring you will not sit well with them.
You will get 100% of your money back, including shipping. Paypal will simply seize his funds and return what is yours.
Lesson: Don't buy a used iPhone.
It's much worse for the seller. His PayPal and eBay accounts will be frozen. Until he squares up with both you and eBay, he's out of money and out of business.

PLEASE HELP - Error message, re "unsupported" ringtone format

Although I was able to open, download and use ringtones recently, now when I attempt to open any ringtones I receive this error message in the Media folder: "The media being played is of an unsupported format." and will not play. I haven't received any calls to test whether my phone will ring or not, but I'm assuming since it won't play back in Media, I'm unable to pull up the ringtone..period.
I'm a newbie to Blackberrys...any help would be so appreciated. Thank you.
vdp
Solved!
Go to Solution.

I honestly don't know - the problem seemed to have fixed itself when I plugged it into the Desktop Manager and I sync'd everything. Very strange, but I couldn't tell you exactly how the problem was solved.

HELP - Error message that I don't understand

When trying to burn an iMovie project to DVD through IDVD I get this error message about 5 minutes in to the process every time:
Error during rendering/encoding
There was an error during rendering/encoding of the menu/slideshows. The burning process has been cancelled.
I am a novice user & trying to make a DVD for all of my family back in the UK to send for Xmas - so URGENT now!!!
Can anyone advise what I'm doing wrong?
I have checked the disk tree and there aren't any errors showing up there as red crosses or black/yellow warning tape signs.
The DVD set up is very basic - no menus or extras - just an iMovie project that I exported from iMovie OK. I have been able to do a version for iTunes so I just don't get why this won't work and the error message is super unhelpful.

Hi JaneyHammond
Welcome to apple discussions. There's an old saying, "The faster I go, the behinder I get". This may apply here because I can tell you from experience that One Step and Magic Dvd are not any faster at capturing / encoding video to dvd-r than creating a dvd via the traditional approach. I don't recommend One step or Magic as a beginner.
Suggestion only: If you're a novice, then please create a typical iDvd project via Create an iDvd Project / apple's web site / iDvd tutorials (as opposed to a OneStep or Magic Dvd). Learn the basics first in order to make a standard dvd and then mess with the other approaches. Not the other way around.
http://support.apple.com/kb/TA27570
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6770.html
http://support.apple.com/kb/HT1583?viewlocale=en_US
http://support.apple.com/kb/TS2178
http://www.apple.com/ilife/tutorials/#idvd-burn
http://www.apple.com/ilife/tutorials/idvd/tutoriallist.html
Hope this helps but if not just come on back.
Message was edited by: SDMacuser

Help - Error message during output

Dear Members of the Forum,
Could you please help me solve the following problem?
I output a project in Adobe Media Encoder CS3 in MPEG2-DVD format and ended up with two files: 'movie.m2v' video file and 'movie.wav' audio file. Then I input those two files as 'timeline' in Encore CS5, did the menus, etc. After checking the project for errors none were identified and I went on building the DVD disc. During the building process the following error messages occured:
'PGC "The Movie" has an error at 00;01;24;20.
Internal software error: %0, line The Movie Info: name=The Movie,
ref=Bpgc, time=00;01;24;20'
When I play the movie in Encore no error occurs at the specified above point of time (00;01;24;20) - there is a crossdissolve transition at this point.
Any ideas how to fix this problem or probably help how to interpret the error message?
Thank you!

Thank you Stan and Bill. I'll try to impliment your tips to save my project.
Before I do so I need to clarify some details:
1) what does it mean to 'have gaps in the Video' that both of you mentioned one should avoid? In my case I have two coherent video.m2v + audio.wav files that were output from Adobe Media Encoder. Both play just fine until I try to output them from Encore. Do you mean gaps between the movie files in the Premiere timeline?
2) Did I do the right thing importing both the .m2v and .wav files as 'import as Timeline' in Encore CS5? Or I should have imported them as 'Asset'? What I did basically when I started the project is I hit 'import as timeline' and then shift-selected both .m2v and .wav files -> the result was that they both appeared neatly lined-up in the Encore timeline and the playback was smooth.
3) If I fail to fix the above error, is there a way to build a 'play-all' DVD without menus in Premiere using the m2v and wav files I have? This is going to be my contingency plan.
Many thanks!
Regards,
Igor

Overwrite Value help error message

Hi Experts,
I want to overwrite the error message given by value help of an input field.
Currently its showing the default error message when the selected value does not exist in value help as "String "56fds65fs" does not match the enumeration"
Can i overwrite this message with my custom message as
"Data not found for the given selection"?
Regards,
Ashish Shah

Hi Guys,
There is a solution to this problem.
using the following tutorial.
[A Simple Input Form with Message and Error Service Support|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/webdynpro/wd%20java/wdjava%20archive/a%20simple%20input%20form%20with%20message%20and%20error%20service%20support.pdf]
i generated the error message using
wdThis.wdGetAPI().getComponent().getMessageManager().
reportContextAttributeMessage(
this.wdContext.currentContextElement(),
                         attributeInfo,
                         IMessageWD_TutComp.MISSING_INPUT,
                         new Object[] { fieldLabel },
                         true);
and raised the error as
wdThis.wdGetAPI().getComponent().getMessageManager().raisePendingException();
Regards,
Ashish Shah

Very helpful error message: "An unknown error occurred (-12939)

My iPhone will now play nothing that hasn't already been downloaded to it via Match. 'Use Cellular Data' is set to ON.
Sometimes after tapping the Play icon an error message will pop up after a while: 'Unable to Download Songs - An unexpeced error occurred (-12939)' with buttons 'Done' and 'Retry'. 'Retry' results in the same condition.
But most of the time when I tap the Play icon, the progress bar sits at 0:00 with no indication that it's even trying to download the track.
This occurs whether I'm accessing via WiFi or via a 5-bar 4G signal.
It hasn't always been like this - do you know what -12939 means?
Since Apple refuses to support this product, some 'regular' person must have access to the error codes, no?

Hi Coolmonk,
Welcome to the Support Communities!
Do you have a Windows computer? The article below explains how to troubleshoot error -9812.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297?viewlocale=fr_fr
"Error -9812"
This alert is often caused by cryptographic issues with your Windows installation.
If you have broadband access (cable, DSL, or other high-speed access), try turning your modem off for a minute and then turning it back on. If you also have a router connected to the modem, turn it off for a minute and then back on again. Once you've established a web connection, try accessing the iTunes Store again from iTunes.
Check for updates to Windows, or search Microsoft's support pages for KB931125. Install the latest available update for root certificates from the Microsoft Download Center.
If the issue continues, follow the steps in the Microsoft knowledge base article KB822798 to resolve the issue. Note that while the Microsoft article describes a different issue, both issues share the same cause and solution.
I hope this information helps ....
Have a great day!
- Judy

Help-Error message itunes producer

Can somebody help me please.
I'm trying to upload something and they're giving me the same error message.
I don't know what to do next... I'm exporting from indesign in epub.
Thanks for your help.

Use this forum: Delivery
...and try iTunes Producer Help and epub validation tools to confirm you're using the proper .epub format, etc.

Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platforlease help error message on boot up// panic cpu 0 calller 0x563ebd unable to find driver for this platform

please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

Hello jayparks41
There are a few things to try and the article below can walk you through them before trying to hunt down a Snow Leopard install disk. I will say that it may come down to reinstall Snow Leopard but also before any troubleshooting, make sure to have a safe copy of your data.
OS X: About kernel panics
http://support.apple.com/kb/TS3742
Mac OS X 10.6: Reinstalling Mac OS X
http://support.apple.com/kb/PH6606
Regards,
-Norm G.

Pease help error message panic cpu 0 caller 0x563ebd Unable to find driver for this platform

please help errror message panic cpu 0 caller 0x563ebd Unable to find driver for this platform) i started recieving this message upon booting up with the start up chime after foolishly deleting the Apple USB ethernet host in teh system/extensions folder.I Was hoping this would be a repair for a minor error message i was recieving after a recent itunes update & it has gone from minor error message to system no start.any suggestions,i dont have the original snow leopard OSX install disc but if i get one will this fix the problem or have i destroyed my mac,,please help

Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode
If you can't do that either, then you will probably need to reinstall 10.6.

Benifits help:error Message no. HRBEN00FMODULES218

Similar Messages

Maybe you are looking for