BI iview when published in portal is giving error

HI,
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:09_09/04/08_0074_336182350
See the details for the exception ID in the log file.
This is the error , I am getting
When we are publishing from WAD to portal , it is giving the Portal Runtime Error.
If we create the same one step by step manualy it is giving the result.
Difference I found is in both the iviews is : System - BI (alias of logical system in the landscape)
Manually created Iview , System : Sap_LocaSystem
For BI system all the connection tests it is giving successful results .
And in RSPOR_SETUP program , result I found
Status 9 - No check with Portal SID <PORTAL_SID>
Status 10 - No check with Portal SID <PORTAL_SID>
Is this 9, 10 properties should be corrected ?
Thanks and Regards,
Srini

The error in the trace file is :
com.sap.security.core.persistence.imp.PrincipalDatabag Thu Apr 10 13:35:00 AST 2008
UniqueID: UACC.PRIVATE_DATASOURCE.un:index_service
Type: UACC
Home data source: PRIVATE_DATASOURCE
Private id part: un:index_service
Principal exists.
"com.sap.security.core.usermanagement"|->"SecurityPolicy" (no time limit)=
"com.sap.security.core.usermanagement"|->"lastsuccessfulpasswordcheck" (no time limit)=
"com.sap.security.core.usermanagement"|->"validfrom" (no time limit)=
"com.sap.security.core.usermanagement"|->"lastsuccessfullogon" (no time limit)=
"com.sap.security.core.usermanagement"|->"validto" (no time limit)=
"com.sap.security.core.usermanagement"|->"ispassworddisabled" (no time limit)=
"com.sap.security.core.usermanagement"|->"j_user" (no time limit)="index_service"
"com.sap.security.core.usermanagement"|->"lastpasswordchange" (no time limit)=
"com.sap.security.core.usermanagement"|->"userid" (no time limit)="USER.PRIVATE_DATASOURCE.un:index_service"
"com.sap.security.core.usermanagement"|->"previoussuccessfullogon" (no time limit)=
"com.sap.security.core.usermanagement"|->"lockreason" (no time limit)=
"com.sap.security.core.usermanagement"|->"lastfailedlogon" (no time limit)=
"com.sap.security.core.usermanagement"|->"successfullogoncount" (no time limit)=
"com.sap.security.core.usermanagement"|->"passwordchangerequired" (no time limit)=
"com.sap.security.core.usermanagement"|->"failedlogonattempts" (no time limit)=
"com.sap.security.core.usermanagement"|->"islocked" (no time limit)=
"$serviceUser$"|->"SERVICEUSER_ATTRIBUTE" (no time limit)="IS_SERVICEUSER"
#1.5 #00144F94DC4800A100000DF600002DBF00044A825E981C1D#1207823700073#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.imp.AbstractUserAccount][md=constructor][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Path##Plain###Exiting method#
#1.5 #00144F94DC4800A100000DF700002DBF00044A825E983307#1207823700074#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.imp.AbstractPrincipal][md=getPrincipalDatabagValues][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Java###null
[EXCEPTION]
#1#java.lang.Exception: LazyFetch: "UACC.PRIVATE_DATASOURCE.un:index_service"-->"com.sap.security.core.usermanagement","displayname".
     at com.sap.security.core.imp.AbstractPrincipal.getPrincipalDatabagValues(AbstractPrincipal.java:1729)
     at com.sap.security.core.imp.AbstractPrincipal.getAttributeValueString(AbstractPrincipal.java:1782)
     at com.sap.security.core.imp.AbstractUserAccount.getDisplayName(AbstractUserAccount.java:2238)
     at com.sap.security.core.imp.UserAccountWrapper.getDisplayName(UserAccountWrapper.java:509)
     at com.sapportals.portal.security.usermanagement.User50_Impl.getDisplayId(User50_Impl.java:222)
     at sun.reflect.GeneratedMethodAccessor600.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sapportals.portal.security.usermanagement.WrappedUserInvocationHandler.callOtherMethod(ServiceUserFactoryImpl.java:172)
     at com.sapportals.portal.security.usermanagement.WrappedUserInvocationHandler.invoke(ServiceUserFactoryImpl.java:147)
     at $Proxy10.getDisplayId(Unknown Source)
     at com.sapportals.config.fwk.IConfigClientContext.<init>(IConfigClientContext.java:84)
     at com.sapportals.config.fwk.IConfigClientContext.createContext(IConfigClientContext.java:132)
     at com.sapportals.config.fwk.IConfigClientContext.createContext(IConfigClientContext.java:118)
     at com.sap.workflow.cfg.AbstractConfiguration.<init>(AbstractConfiguration.java:279)
     at com.sap.workflow.cfg.SchedulerConfiguration.<init>(SchedulerConfiguration.java:22)
     at com.sap.workflow.es.scheduler.TaskSchedulerDeadline.run(TaskSchedulerDeadline.java:63)
     at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
     at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
     at java.lang.Thread.run(Thread.java:534)
#1.5 #00144F94DC4800A100000DF800002DBF00044A825E983D07#1207823700081#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.locking.imp.LockManager][md=escapePrincipalID][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Plain###Mapped principalid for locking: "UACC.PRIVATE_DATASOURCE.un:index_service"-->"000_bTtZDFaWpfKiQ131rUhvSA=="#
#1.5 #00144F94DC4800A100000DF900002DBF00044A825E985131#1207823700087#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.locking.imp.LockManager][md=escapePrincipalID][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Plain###Mapped principalid for locking: "UACC.PRIVATE_DATASOURCE.un:index_service"-->"000_bTtZDFaWpfKiQ131rUhvSA=="#
#1.5 #00144F94DC4800A100000DFA00002DBF00044A825E985A12#1207823700089#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.locking.imp.LockManager][md=escapePrincipalID][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Plain###Mapped principalid for locking: "USER.PRIVATE_DATASOURCE.un:index_service"-->"000_zCZ7K+TFQWRbSAklTiJDwQ=="#
#1.5 #00144F94DC4800A100000DFB00002DBF00044A825E98710D#1207823700095#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.locking.imp.LockManager][md=escapePrincipalID][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Plain###Mapped principalid for locking: "USER.PRIVATE_DATASOURCE.un:index_service"-->"000_zCZ7K+TFQWRbSAklTiJDwQ=="#
#1.5 #00144F94DC4800A100000DFC00002DBF00044A825E988C3D#1207823700097#com.sap.security.core.imp#sap.com/irj#com.sap.security.core.imp.[cf=com.sap.security.core.imp.AbstractPrincipal][md=getPrincipalDatabagValues][cl=30114]#J2EE_GST_EPD#0####b4e72140030c11ddada100144f94dc48#Thread[ThreadPool.Worker5,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Debug##Java###null
[EXCEPTION]
#1#java.lang.Exception: LazyFetch: "USER.PRIVATE_DATASOURCE.un:index_service"-->"com.sap.security.core.usermanagement","description".
     at com.sap.security.core.imp.AbstractPrincipal.getPrincipalDatabagValues(AbstractPrincipal.java:1729)
     at com.sap.security.core.imp.AbstractPrincipal.getAttributeValueString(AbstractPrincipal.java:1782)
     at com.sap.security.core.imp.AbstractPrincipal.getDescription(AbstractPrincipal.java:667)
     at com.sap.security.core.imp.AbstractPrincipal.getAttribute(AbstractPrincipal.java:309)
     at com.sap.security.core.imp.User.getAttribute(User.java:1006)
     at com.sap.security.core.imp.UserWrapper.getAttribute(UserWrapper.java:321)
     at com.sapportals.portal.security.usermanagement.User50_Impl.getValuesForKey(User50_Impl.java:760)
     at com.sapportals.portal.security.usermanagement.User50_Impl.getDescription(User50_Impl.java:474)
     at sun.reflect.GeneratedMethodAccessor601.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sapportals.portal.security.usermanagement.WrappedUserInvocationHandler.callOtherMethod(ServiceUserFactoryImpl.java:172)
     at com.sapportals.portal.security.usermanagement.WrappedUserInvocationHandler.invoke(ServiceUserFactoryImpl.java:147)
     at $Proxy10.getDescription(Unknown Source)
     at com.sapportals.config.fwk.IConfigClientContext.<init>(IConfigClientContext.java:87)
     at com.sapportals.config.fwk.IConfigClientContext.createContext(IConfigClientContext.java:132)
     at com.sapportals.config.fwk.IConfigClientContext.createContext(IConfigClientContext.java:118)
     at com.sap.workflow.cfg.AbstractConfiguration.<init>(AbstractConfiguration.java:279)
     at com.sap.workflow.cfg.SchedulerConfiguration.<init>(SchedulerConfiguration.java:22)
     at com.sap.workflow.es.scheduler.TaskSchedulerDeadline.run(TaskSchedulerDeadline.java:63)
     at com.sapportals.wcm.service.scheduler.SchedulerEntry.run(SchedulerEntry.java:174)
     at com.sapportals.wcm.service.scheduler.crt.PoolWorker.run(PoolWorker.java:108)
     at java.lang.Thread.run(Thread.java:534)
Any help ????
thanks ,
Srini

Similar Messages

When the Table :" J_2IRG1BAL , " is giving error message SV023

Dear Sir/Madam,
When going to enter data in the table J_2IRG1BAL, it is giving error message as "create data processing function module SV023 in ABAP client in Dev. Server. Though it is alowing other tables to edit as usual.
Pls. advice.
Thanks,
Pranab
Edited by: Pranab Das on Jul 23, 2009 8:09 AM

Can you please check 'any authorization error' on your name. you can check in su53 transaction code.
regards
nag

Newbie to BI Publisher..preview report giving error msg in word 2007..

Hi,
I am new to BI Report. I have installed BI Publisher standalone 10.3.4.1..Generated sample XML file...created report on Bi Publisher and now when I try to do preview it gives me an error message saying that I need to check the path of the file
'D:\Documents and Settings\swatee.jain\Local Settings\Application Data\Oracle\BIPublisher\TemplateBuilderforWord\tmp\441274806764750out.rtf'.
When I go to this location and click on the rtf file..I see my report...Am I missing some word setting....I am not able to generate any BI report...Any help would be appreciated...
Thanks
swatee

We found out what the problem is.
The report was using a wizard table, the table had 8 columns that actually went past the margins of the page. The built in renderer for PDF in the BI publisher desktop does not fail, but the report columns do "fall" off the page when you look close, just by a few characters on the last column but the line making the box around the table IS still printed making the last few characters missing difficult to notice.
The BI Publisher render simply throws the error above and fails.
We removed 2 columns, made sure the report stays in the margins of the report and all works well now.

BI Publisher Desktop - MS Word giving error!!!

HI Experts,
I am following BI Publisher 'Getting started' article on Oracle site. In on of the step it asks to open BI Publisher report into MS word. When I did this it give an error.
Article link: http://st-curriculum.oracle.com/obe/fmw/bi/biee/r1013/bipub/intro/gettingstarted.htm
Error screen shot:
http://img101.imageshack.us/img101/687/bipworderror.jpg
Do I need to configure some parameters in MS word?? Please help me at this point.
Thanks in advance,
DK

I am going on the assumption that the report in Answers has some type of parameters. By parameters I mean that a prompt, server, or presenation variable is used to run the report in answers.
The word add on can not handle bi answers reports with parameters.
But you are in luck as uncle Danscan has already handled this problem. You won't find it explained anywhere else.
Step One: Create a non-parameterized version the BI Answers report. Basically hard code values in the report. And save that version of the report. Keep your orginal version as you will need that later.
Step Two: Link Publisher with the non-parameterized version of the report.
Step Three: Open word and load up the data as you would expect to do.
Step Four: Create the report template by adding in the table, fields, and other stuff. Once its is setup it is time to test it.
Step Five: Open BI Answers. ( I am assuming that both Publisher and Answers are loaded together in the Enterprise way. If you are unsure click on the more products link next to the Answers link in the BI Dashboard/Answers tool. Publisher should be available). Go to the dashboard that you want to run the publisher tool from. This should have the same prompt as the original BI Answers reports have. You will need these prompts in a second.
Step Six: Test the publisher report. If everything looks good we can move onto the final step. If not reopen word adjust, upload, test etc.
Step Seven: Go into publisher and change the Reports in the Data model to the versions with parameters. (At this point you can not open the online template again till the reports are switched back. You can do some fancy hacking to get it to work, but that is a trick for another post)
Step Eight: Open BI Answers/Dashboards and test your new publisher report out.
Step Nine: Question your sanity after all of these steps.
Good luck and I will offer any help I can.

Publish to portal error when creating a iview

hi gurus,
I have done complete BI-EP integration. SSO is also working fine. But when i publish a query from query designer to portal, i am geting a error when creating a iview for the query as show below.
Error:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId EPD_PORTAL_B07 on host epdev with SSO not authorized: Authentication failed.
when i manually create a BI Query iview,its working fine but to create a iview from publish to portal in query designer it is througing me error.
Regards

yes i have used that tool,,,i am getting below error.
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Calls from WebAS ABAP to WebAS Java will fail because the certificate of the BI mastersystem is not imported into J2EE ticket keystore Import the certificate to establish a trust relationship -
RED
The issuer DN of the imported ticket 'EPD_certificate' is the same as the issuer DN of SAPLogonTicketKeypair-cert Most likely, you are running an Add-In Installation. See note 917950, section 'Add-In Installation and importing Certificates with identical system ID (SID)' for details Display note 917950
I have checked everything,,but still geting red lights
Regards

Report giving error when the alias in the sql statment is long

Hi,
When I am writing a select statement with long alias name, report in portal is giving error, and is working fine with sqlplus
Any idea,
Thanks,
Mansoor

Hi
when i run in foreground it is working perfectly. The Spool is not getting created.
regards
madhuri
Edited by: madhuri_2000 kumari on Nov 26, 2008 2:00 PM

Html internal server error when published

I put this

<div align="center">
<a href="http://www.shinystat.com/it" target="_top">
<img src="http://www.shinystat.com/cgi-bin/shinystat.cgi?USER=nonnibit" alt="Contatore sito" border="0" /></a>
</div>

and I can see my website on iWeb fine but when published it shows Internal Server Error.
What can I do?

You publish at a free website hoster :
http://xoom.virgilio.it/
With all the consequences of it.
The webhoster adds a lot of code to your pages. Look at the end of the source.
This is the page where the stats should appear :
http://nonnobit.xoom.it/NonniBit/Inizio_files/widget1_markup.html
None.
So either get another hoster or pay for it.
Either way, it's not an iWeb issue. I pasted the stat code in a html snippet and it shows as intended.

SSO error message when publishing a BI 7.0 report to the NW04s Portal

Please indicate how to resolve the following SSO error message received when publishing a BI 7.0 report from Query Designer to a PCD folder on a NW04s Portal:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId (server alias)_PORTAL_ABV on host (server alias) with SSO not authorized: Authentication f

Hi,
Please check if the integration and sso configuration did correctly
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
Hope it helps.
Regards,
Mona

Java system error, when publishing BI Queries to Portals...

Hello all,
I am getting the error 'Java system error: Exception in method processFunction.' when publishing the BI queries (7.0 with SP 14) into EP 7.0 portals. Our BI system is integrated successfully into Portals.
Further diagnosis shows 'An error occurred in the BI components on the SAP J2EE Engine'.
Please reply to this message with any relevant/useful details to resolve this problem. Thanks in advance...
Thanks,
Ram.

also restart the J2EE engine from SMICM.
Hope it Helps
Chetan
@CP..

Javascript errors when iView is running in Portal Content Area

We have URL based iView which is running flex application. If this iView is running in separate window (by preview, link or setting "Launch in new Window" option) everything is fine.
However, if iView is running inside Portal Content Area there are bunch of JavaScript errors (missing object, permission denied). The iView itself is still running fine, but those errors are annoying and could be a problem for customers.
Are there any ways to fix it?
Thanks.

Hi,
So after a few days I managed to finally get a workable solution:
Whenever you are referring to a script file in your main page, you will not be able to open the file when in normal mode, even with relaxing the domain and all the other hints posted.
What you need to do is to include the actual content of the *.js file in the main html page.
For example, if you have a page called index.html that refers to a file AC_RunActiveContent.js which is located in your scripts directory, you will need to change the code in the index.html file as follows:
Initial HTML File:*
< HTML>
< HEAD>
< TITLE>Test Page</TITLE>

< s c r i p t s r c="../scripts/collapsiblepanel. j s" type="text/ j a v a s c r i p t"></ s c r i p t>

< /HEAD>
< BODY>
< /BODY>
< /HTML>
New HTML File:
< HTML>
< HEAD>
< TITLE>Executive Committee - Balance Sheets</TITLE>

< s c r i p t t y p e="t e x t / j a v a s c r i p t ">
your actual javascript code
< / s c r i p t >

< /HEAD>
< BODY>
< /BODY>
< /HTML>
By doing this:
You will be able to use java scripts in your html file and applications without experiencing the problems mentioned. Keep in mind though that you will now have all your script file code in your actual html file and the number of lines in the files will increase dramatically.
The increase in size of the actual html files are not too bad, a normal 2Kb html file may increase to 70Kb if not more, depending on the code contained in the initial *.js file.
I have played around with this and have been able to include Macromedia Flash objects in my html files too, by pasting the actual code content in the html files as opposed to refereincing the script in the relevant directory.
I hope this helps.
Regards,
Freddie Botha.

Report works fine in VS2010 but simply doesn't show when published

Problem:
Crystal Report works fine in VS 2010 but doesn't show when published to web-server, there is no error, it simply doesn't show.
Background:
Installed VS2010 on a freshly installed and fully updated (.net 4.0 is included in the updates) windows server 2003 box with production release Crystal Report 2010. Nothing else is on the server. IIS 6 is running. My web-server and VS2010 is on the same box.
I went ahead and created a new asp.net 4.0 web project called webapplication1. Thereafter, i put a few controls (text-boxes, list-boxes and so on) on the default.aspx page. Then i created a report.aspx page. This page will have the crystal report viewer on it. I went ahead and set the report up without much hassle (got how-to's from the internet). I successfully tested my web app with the built-in testing server, the beautiful crystal report presented exactly what i asked it to. There was one recurring "Sys.Application is null or not an object" hiccup that occured every time during testing when i navigated from the default.aspx page to the report.aspx page (the page the report is on). Clicking ignore or continue on the dialogue box that comes up because of the hiccup will allow testing to continue. Here's a screen-shot of this recurring hiccup.
http://i440.photobucket.com/albums/qq122/ricom_19/Testing-Error.jpg
As i've shown, testing went great, except for the hiccup. I now moved to setup a publish profile. Since my web-server and VS2010 is on the same box this seemed relatively straight forward. All the files went over except the report, i.e. crystalreport1.rpt file. I solved this by setting the build action to 'Content' in the CrystalReport1.rpt properties. I did a republish. Now i have all my files, see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Application-Home-Directory.jpg], on the web-server.
I proceeded to try to browse to my app from another computer on my network. This was successful until i tried to navigate to the report.aspx page that the crystal report is on. The the report.aspx page loaded but the crystal report was simply not on it. No errors, not even the hiccup from testing occured. Its as if the crystal report viewer was never on the page to begin with. Only when i right clicked on the page and 'view source' did i see some remnants of the crystal report viewer.
Here is the Report.aspx page when tested in VS2010:
[http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/successful-Test.jpg]
Here is the Report.aspx page when published to the web-server and browsed to from another computer on the network:
[http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/Reportviewer-Disappear.jpg]
Details of adding report to my web app:
1) Populate my dataset then write the XML schema, reportschema.xml
2) Added the crystal Report to the project then used the wizard to navigate to the reportschema.xml. Of course i had to create new connection in Database expert. see screen-shot:
[http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg|http://i440.photobucket.com/albums/qq122/ricom_19/CR-Database-Expert.jpg]
3) I formatted the report the way i wanted it
4) Added the Crystal report viewer on the Report.aspx page
5) In the code-behind of the Report.aspx page i bound the viewer to a report document that is loaded with CrystalReport1.rpt file
see screenshot: [http://i440.photobucket.com/albums/qq122/ricom_19/Report-Page-Code-behind.jpg]
That's it. As mentioned, it tested fine in VS2010 but the viewer doesn't show when i publish to the webserver. I wrote a crystal report in .net about 8 years ago. Things have changed soooo much since then.
I am wondering if its a license issue? Was also wondering if it had anything to do the testing hiccup, even though research is suggestion the two are unrelated.
I've described my actions as best as i could (without getting into ridiculous detail) and have included screen-shots of relevant stages of the process. Have a look and tell me your thoughts. Thanks.

The "Sys.Application is null or not an object" issue is known, submitted for a resolution and documented in KB #1528503. Unfortunately the KB search has been down the last couple of days...
However, the issue is limited to compile time and does not affect a completed application.
Re. the viewer missing. Sounds like the viewer directory did not get created or configure correctly. Before I get to that. You mention:
"I proceeded to try to browse to my app from another computer on my network."
This bring up the question: If you run the app right on the app server. e.g.; not a client computer, does the viewer and report come up? Is this issue isolated to client computers on the network?
I suspect that the issue exists irrespective of which computer you try to see the report from - but that is an assumption. If the assumption is correct, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a] article on configuring the viewer. The article does not have CR4VS2010 documented, but you should be able to guide your self using the article. I think the pattern will be obvious.
Ludek

Error in Java based iView when trying to use J2EE bean

I am trying to create a iView based on Java Portal app.
[Java portal app has dynPage based Portal App Object]
I created a PAR and uploaded to Portal. I created iView and worked it fine in (preview).
[iView created using "Content Administration -> Portal Content -> New From Par -> iView"]
I deleted my iView and removed my archive (using "Java Developer -> Portal Archive Deployer/Remover").
I changed java portal project so that I can reference a bean from J2EE app already deployed on server.
[Edited Portalapp.xml to add a
<property name="PrivateSharingReference" value="SAPJ2EE::service:p4, SAPJ2EE::test.myApp/myBean"/>
This time PAR installs fine, but when I try to preview iView, get following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 02:36_11/08/05_0016_4991450
See the details for the exception ID in the log file
I removed "SAPJ2EE::test.myApp/myBean" from portalapp.xml and rebuilt PAR and rebuilt iView but I get same error as above.
1. Where are logs located (for iView errors)?
2. Any pointers on using J2EE bean? (I am trying to use step described in topic "J2EE Applications Access from Portal Applications" from manuals).
3. Do I need to reference any additional libraries to use p4?
Thanks.

The problem seems to be in portalapp.xml
I created second PrivateSharingReference in it
<property name="PrivateSharingReference" value="com.sap.portal.htmlb">
<property name="PrivateSharingReference" value=" SAPJ2EE::service:p4, SAPJ2EE::test.myApp/myBean"/>
I changed to be one entry only like
<property name="PrivateSharingReference" value="com.sap.portal.htmlb, SAPJ2EE::service:p4, SAPJ2EE::test.myApp/myBean"/>
Now iView works again....But still donot know where log is..

Publish to Portal no longer working

Hi there
We have published numerous templates from the WAD to our portal environment.
It has been a while since we have needed to do this, and now, all of a sudden, the link is no longer working.
We can open a template in the WAD, then choose Web Template >> Publish >> to Portal. The first screen I am presented with, then, is the portal login screen (as expected), then, once authenticated, I get a "Cannot find server or DNS error" error message.
The portal is accessible, as I can navigate to it normally and browse all the other reports already published.
The URL that is used for publishing is
http://a03a001.ucs-solutions.co.za:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex3x?system=SAP_BW&CMD=START_BROADCASTER70&SOURCE_TEMPLATE=PRINTTEST&START_WIZARD=X&DISTRIBUTION_TYPE=PCD_EXPORT
If I follow that URL, it takes me to an iview in PCD >> Portal Content >> Content Provided by SAP >> Platform Add-ons >> Business Intelligence >> iViews >> BEx Launcher (Format SAP BW 3.x).
We are using a 2004s system ... so I assume this is the correct iView to be using. If its the wrong one, how do I configure to use an alternate iView?
If I look at the properties of this standard iView, the only one that concerns me is the BEx Web Application Query String, which is set to "to_be_defined".
If I try to preview the iview, I get the same error message as described above.
Any ideas?
Cheers,
Andrew

Originally Posted by danh2010
All systems are preexisting, except the Groupwise. We migrated from 8 to 2012 an dit no longer works. I did reinstall Cisco Personal Communicator and that did nothing different.
I can right-click from FireFox or IE and choose call and it'll call out.
But from GroupWise, the right-click menu shows dial and wants to use the default XP dialer.
I can't find any info on this at all.
Maybe double check the settings found in GroupWise and set/reset the standard dialer (should be within the environment's default actions options). If that works you might be able to "catch" the change and push it as a default to the other systems. There should be a regkey "DefaultTelephonyProvider" found in HKEY_CURRENT_USER\Software\Novell\GroupWise\Client \Setup once set. Don't know if that is the only key needed to be set or if there are others.
If that does not fix it an ugly workaround could be to rename the dialer exe and replace it with the/a link for the Cisco dialer. Ugly, but might work.
Cheers,
Willem

How do I get my code changes to show when published in Business Catalyst?

I have created my website using !Adobe Muse and have used the Ecwid ecomm widget to integrate a shop. As I wasn't happy with the font, colour, etc, I changed the code using the edit 'html' function, accessing the code information from a design browser mode and then further on in the process, I published it to Business Catalyst. However, now the changes don't show. How do I get my code changes to show when published in Business Catalyst? Do I need to go through the same process using Business Catalyst?

Hi,
Thank you for choosing Ecwid! To change the design of your storefront, you should go to Ecwid Control Panel > Settings > Design > CSS Themes. Find your current active theme and add all the necessary changes in a big input field that you’ll see there. To know more about how to improve your storefront design, please refer to this article http://help.ecwid.com/customer/portal/articles/1083332-how-to-change-ecwid-design
If you make changes to your CSS Theme but your storefront design remains the same, please refer to this article http://help.ecwid.com/customer/portal/articles/1149625-i-don-t-see-the-changes-i-made-to-m y-css-theme
Also, you can find a good range of articles and tips on how to improve your Ecwid store in our Help Center http://help.ecwid.com/ Feel free to use it!
If you get any other questions about CSS or Ecwid functionality, contact us on our forum http://www.ecwid.com/forums/ There we will be able to check your website and provide more specific solutions for you.

Submit a webdynpro IView from a non-Portal application

Hi,
i have create a WebDynpro application. This application shows in a table a list of '. This reports are IView for Bex Web Application in a SAP portal. For navigation to this BW IView the WebDynpro application must be also embedded in a WD iView.
The problem is:
This WD IView will be requested by a non-sap/portal application with dynamic parameters and also with the POST method.
In the WD application i have implemented the parameter request with following code:
int i = 1;
String name = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("var_name_" + i);
If the non-portal application submit the WD application directly -> the parameters are available.
But when the non-portal application submit the WD IView, then the Parameters are 'null'.
Thank you for quick response
Anne

Hi,
yes I'm use the statement to submit the iView:
<form action="http://server:50000/irj/servlet/prt/portal/prteventname/Navigate/prtroot/pcd!3aportal_content!2fevery_user!2fgeneral!2fdefaultDesktop!2fframeworkPages!2fframeworkpage!2fcom.sap.portal.innerpage!2fcom.sap.portal.contentarea?NavigationTarget=ROLES%3A%2F%2Fportal_content%2Fcom.kwl.kwl-01.KWL-01%2Fcom.kwl.kwl-01-iviews.KWL-01-Iviews%2Fcom.kwl.WEB_DP%2Fcom.kwl.IW_GISBW&DynamicParameter="
method="post">
var_name_1<input name="var_name_1" type="text" value="ZHAMFSB"><br>
var_value_ext_1<input name="var_value_ext_1" type="text" value="129191"><br>
var_name_2<input name="var_name_2" type="text" value="ZHAMFSB"><br>
var_value_ext_2<input name="var_value_ext_2" type="text" value="129761">
<input type="submit" value=" Senden ">
In this case the DynamicParameter will be send by GET.
But i want use the POST Method.
I get the parameters in both cases not in my WD application.
What is the problem?
Thank you
Anne

BI iview when published in portal is giving error

Similar Messages

Maybe you are looking for