Billing for partial amount

Hi Friends,
I need to do billing for partial amount where the quantity is only 1. As I know the solution for this is activating billing plans and giving the required % in Sale order. But I dont know what will be my % of billing until the time of billing. So I want to do billing for only part of the amount and should be able to do 2nd billing again for the balance amount and for the same 1 qty.
Is this possible? If so how?
Kumar

Hi Kumar,
You can try this way. Create this item as a value item in the sales order.Copy the item category "WKN" and rename it , but in the billing relevance maintain as "I" and If item is relevant for delivery , maintain that indicator and assign the billing plan to the item category. Now once you are in the sales order, system will propose the value as "0" to be billed on a particulat date. Once you are at billing, you will be knowing how much you have to bill the customer, now you come back to the sales order and change the value in the billing plan. And in item category(VOV7) MAINTAIN Completion rule as"E", So the item will be completed only when you fully invoice the customer or if you dont want that maintain item is complete at first reference. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Similar Messages

Order related billing for Partial Qty item in sales order

Hi SD Gurus,
In case of delivery-related billing we can create a bill for partial qty or item by creating delivery(against order) for partial qty/item. Is it possible to create order-related bill for the partial qty or item ?
Any suggestion on the subject is appreciated.
Thanks in advance,
Velmurugan

HI Velmurugan,
This can be solved through by doing an order related billing,
First check weather copy control setting is there for order to billing.
In item category check for billing relevance. Make it has order related billing.
Now do order related billing for partial quantity.
Regards,
Nagesh

Milestone Billing for partial quantities

Hi,
My client is having Milestone billing schedule where in they bill their customers as per the billing schedule maintianed in the billing plan tab in sales order.
Billing plan is activated at Item level as the various items in a sales order can have different schedules.
But the issue is that they bill their customer on pro-rata basis which means the the billing document created for different milestones in the billing plan for each item can happen for partial quantities of the item under consideration.
Standard SAP Functionality doesnot allow this. In Copy Control, I tried out using the Invoice Split in Data Transfer Routine in Copy Control which doesnot give me the desired fucntionality.Copy Requirements Formula used is 023 (Item ord.ref. w/o AZ) as i need to create invoices for each milestones at item level which is working fine. But just that i cannot do milestone billing (for individial milestones at Item Level) for rpartial quantities. It can only happen for the entire order quantity.
In short the condition BIlling Quantity = Order Quantity - Invoiced Quantity is not working. Always Billing Quantity = Order quantity.
Delivery Related billing will not serve their purpose either...
Can any one throw some light on the above issue? Can I achieve the desired rersult using some custom routines?
Regards,
Nithin

Hi Navaneetha,
Thanks for your reply.
I do completely agree with you and informed the same to the client.
I have activated Billing plan at item level and each item is been assigned with different WBS Element and everything is working Fine except the fact that partial billing is not possible for the quantities.
Let me explain the business implications of the same.
My client might have a billing schedule with 4 milestones for an Item A of 100 Quantities in a Sales order
Milestone 1 : Upon the confirmation of Order Acceptance , they bill the customer for 10 %
Milestone 2 : Upon the completion of designing part, they bill the customer for another 20 %
Milestone 3 : Upon the dispatch of materials to the customer. they bill the customer for another 60 %
Milestone 4 : Upon the submission of the documents and completion the legal aspects, the final invoice for the 10 % which completes 100 % Milestone billing
Now here in the third milestone when the items are dispatched, they also need to create the excise invoice. here what they do is that they bill the customer for 60% of the net item value as explained above, but the taxes would be calculated for 100% net item value( VAT/CST & Excise Duties).and based on this commercial invoice, the excise document is created. I managed to map that. No problems
But their concern is with third milestone. Milestone 1, 2 & 4 will happen for the full 100 quantities. But for third milestone, let us say that they dispatched 90 quantities of the item and for some reasons they could not dispatch 10 nos of items. They are entitled to bill their customers for the 90 nos of the Item and the rest 10 Nos they will bill it as a different invoice. Now SAP Doesn't allow this.
One solution is to ask them to prepare Proforma/Commercial Invoice against the delivery Document and Excise Invoice against the invoice so created. But then it further complicates the process and already billing against billing plan is so complicated that they are complaining that their life was so easy before the implementation of SAP
They want some solution for this problem of theirs as when they mean one quantity of Item A, they mean some thing around 10-50 Crore Rupees.
There is one note released by SAP but that is restricted to versions below 4. 7 and become obsolete for higher versions.
Can any body help me out with this? How about possibility of a custom Routine in Copy Control or Data Transfer?
The problem is that the moment i activate an item category with billing plan, it deactivate the copy control setting for partial order billing.
Thanks & Regards,
Nithin Mohanan

Order related billing for partial payment and inconsistent amounts

Hi,
We are using billing plans with payment cards to capture payments before goods are delivered. SAP doesn't seem to support credit cards for down payments, so we are entering the payment in the payment card and billing plan lines, then generating the F1 order-related billing.
Sometimes, the dollar amount is prorated proportionately, sometimes, it is disproportionately. For example, if we have 5 line items for $100, $200, $300, $400, $500 a total net value of $1500, and the customer makes a credit card payment of $500, we are seeing that sometimes this explodes to $33, 66, 99, 122, 155. Sometimes, it explodes to $0, $0, $0, $0, $500 in the billing document.
Where does SAP control the way the amounts are derived in the billing document? This is milestone billing.
Ideally, we would like this evenly applied across all conditions. I really need to understand how SAP handles this. The configuration indicates that the pricing is copied straight from the order. I don't see anything custom in the document copy procedure here.
I have had a difficult time finding anything in forums or on the internet in general, I've tried search terms such as "order related billing amount distribution" and "payment card amount allocation" as well as a few other terms but haven't found anything helpful.
Thanks for any suggestions you may have.

Hi,
Have you check in copy control order to invoice
At item level Pricing type it should be - G
Kapil

Still being billed for credit amount we were told to take

We recently changed our services and were told that we had a credit to take on our next payment. We did take the credit, but our bill now shows that we still owe that amount. Would like to get this resolved before Comcast tries to charge us a late payment.

Hi DAS817,
I am showing a credit balance on your account. If you are looking at this online, the online billing my not update until your newest billing statement comes out.
Thank You

Billed for 2 amounts pending in my checking account for 12/24. I'd like to find out what they are for.

Ihave 2 pending charges from apple iTunes in my checking account scheduled to pay out on 12/24. One for 19.99 and and one for 17.99. How can I find out what I'm being charged for. I called apple and they referred me to a web site which still doesn't give me a clue for how to get this information and know what these charges are for. Can anyone help me find out and explain how to do it? I don't get why there just isn't somewhere I can call and find out.

you need to go to expresslane.apple.com and then email itunes to find out

Partial billing for order related billing in Milestones

Hi,
I have scenario, where i required to do the billing for partial quantities through order related billing in billing plan.
Can anybody help inthis.
Regards
Gautam

I suppose, it is not possible.
I faced similar situation & the work around used by me was I changed the order quantity to the quantity to be billed & after Billing, I went back to Sales order & added the same Item with Balance quantity in next line item & met the requirement.
In Billing document, we can only change the price & cannot change quantity, as it is grey field.
Regards,
Rajesh Banka
Reward suitable points

Capital goods partial amount posting.

I hav one issue of client. requirement is, he has to pass 50% amt on capital goods to registers (RG23C) and 50% to hold account. Amount is going to respective accounts but only AED amount is not going properly. AED amt is going 100% of vendor invoice value to RG registers whereas it also have to go 50% as like other ( BED, or Ecess)
Plz give me some idea where we maintain such settings for partial amounts.
Regards
Inder Pal

Hi Inder
Check the following link
http://help.sap.com/saphelp_47x200/helpdata/en/48/71edea2cd411d4ae1900105a16d13d/frameset.htm
Thanks
G. Lakshmipathi

Tables for Partially Cleared Amounts for Customer

hi all,
I need to calculate Partial Amounts for particular Customer .
Can anybody tell the tables for Calculating Partial Amounts.
Thanx & Regards
Rami

Hi,
As per your question, we assume that you want the amount where in we received partial payments from / to customer (incoming payment / debit note ). Table relevant for this will be BSAD --> which will contain all payments (partial / full).
Hope it helps.
Thanx,
Daya

TS1702 I was charged the wrong amount on 3 albums I downloaded. I received an email about special pricing, I downloaded the albums I wanted and was billed for the full amount. How do I get a refund?

I was charged the wrong amount on 3 albums I downloaded. I received an email about special pricing, I downloaded the albums I wanted and was billed for the full amount. How do I get a refund?

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Is price change possible for Partially billing

Hi ALL,
I have done partial billing for a sales line item, now in the sales order can i change the price(PR00) for that line item.
Eg: QTY=100, i have done billing for 50. can i know change the price(PR00) for that line item in Sales Order.
Thanks in advance
regards
Prasad

Hi Prasad,
No, as per standard its not possible. But yes you can update the price of remaining items in billing.
Thanks,
Raja

HT3702 hi i got bill for pandora one radio renewal and i havent purches please refund my account on the amount of $3.99 and cancel the subscription thanks

i got a bill for pandora one i never order please refund my account $3.99 and cancel the subscription Thanks

These are user-to-user forums, you are not talking to Apple here. If you want to contact iTunes support then you can do so here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store
If you have the app and it has an auto-renewing subscription then you can manage your own subscriptions : http://support.apple.com/kb/HT4098

Proforma Invoice - Partial Amount. Is it possible ?

Posted: Tue Jan 22, 2008 3:21 pm Post subject: Proforma Invoice - Partial Amount. Is it possible ?
Hi,
Here is our scenario.
We create sales order for very large Roofing jobs. Sales order will have 1 or 2 Items. However, each item has Billing plan with multiple entries like Down payment Inv, Partial Inv and Final Inv. We want to create Pro-Forma Invoice so we can just send Invoice to customer, with no effect on our AR side. I created Sales order with 2 Items. When I created Pro-Forma Invoice using VF01, it created 2 Invoices for 2 Items. My question is, Is it possible to create Pro-Forma Invoice for just 1 Item AND within 1 Item, Partial Amount. If so, How ?
Thanks in Advance,
Niranjan

Hi,
It looks you need to create a routine in tranx VOFM with the logic to select one item and partial value.
Then assign this routine in the billing document copy control - item level.
Hope this will help.

Mile stone billing with partial quantity.

Hi,
We are facing problem in the milestone billing. we have scenario where we have payment terms (Ex: 10% advance, 70% on delivery, 10% on installation and remaining 10% on completion) with the materials having multiple quantity. Delivery will be in partial, so except the advance invoice all the remaining invoice require change in the billing quantity before billing, but in the system billing quantity showing in gray mode. After delivery also remaining (10% installation) also will be on different quantity i.e. actually installed at the site.
As per the law invoicing has to be done with in the 14 days of the installation of the work, once the installation over for partial quantity we required to do the invoice irrespective of the delivered quantity.
In the system if we do the invoice for the total quantity at the time advance after that we are unable to change the invoice quantity in the subsequent invoices.
Please suggest us how to make enable the billing quantity field in case of milestone billing.
Ex: let us say sales order is created for qty 10 with the value of 1,00,000.00 as payment terms as follows.
10% Advance, 70% on delivery, 10% on installation, 10% final completion.
First we have raised the 10% advance invoice using 1st milestone with the total quantity.
When we deliver, we deliver only partial quantity i.e. qty. 5, so we have to create the invoice for (50,000-5,000) Rs 45,000. But when we create the second invoice we are unable to change the billing quantity. Same way when we create the third invoice after installation we may have to bill for qty. 3 if only 3 machines are installed out of 5 delivered, so again we require the quantity change.
Regards,
Upendra
+919824795543

hi
Milestone billing means distributing the total amount to be billed over multiple billing dates in the billing plan.
As each milestone is successfully reached, the customer is billed either a percentage of the entire project cost or simply a pre-defined amount.
During sales order processing, the system determines from the item category whether a billing plan is required and, if so, which type of plan
The type of billing plan that is determined at this point is set up in Customizing and cannot be changed in the sales document.
Billing plans for periodic billing and milestone billing plans for project-related milestone billing have different overview screens so that you can enter data relevant to your
processing.
For example, for milestone billing, you must be able to enter data to identify the individual milestones.
IMG configuration requires :-
1. Maintain billing plan types for milestone billing in OVBO.
2. Define date description in SM30 - V_TVTB.
3. Maintain Date Category for Billing Plan Type IN OVBJ.
4. Allocate date category in SM30 - V_TFPLA_TY.
5. Maintain date proposal for Billing Plan Type in OVBM.
6. Assign Billing Plan Type to Sales Documents Type in OVBP.
7. Assign Billing Plan Type to Item Categories in OVBR.
8. Define rules for determining the date in OVBS.
Milestone billing is typically used for billing projects, such as plant engineering and construction projects. Such projects often include a series of milestones that mark the completion of different stages of the work. In the SAP R/3 System, milestones are defined
in a network along with planned and actual dates for the completion of work. The milestones are also assigned to the billing dates in the billing plan.
Each milestone-related billing date is blocked for processing until the Project System confirms that the milestone is completed.
Delivery-relevant order items for which a milestone billing plan applies are billed on the basis of the requested delivery quantity and not on the total of the confirmed quantities.
Reward if USeful
Thanx & Rerards.
Naren..

Purchase order approvals for Negative amount

Hello All,
Want your assistance on the above mentioned topic.
We have a business requirement to have Purchase order approvals for Negative amount. I understand from the Below SAR that JD Edwards 9.1 doesn't support PO approvals on Negative amount
Bug 11022294 : APPROVAL ROUTES FOR DEBIT MEMO - SAR: 8940968
Appreciate if you can suggest best practice or workaround to meet this requirement.
Thanks & Regards
Nikhil M. Pawar.

Dear Ashutosh,
Couple of points from my side. We have a similar scenario at a client where I am working. In construction, there are three stages.
a) Practical Completion
b) Partial Completion and
c) Final Completion.
In the case above, you are not deducting an amount from existing PO, you would be applying a penalty on the Vendor for Failure for not meeting the Practical/Final Completion Certificate requirements. Based on the legal understanding, usually the penalty may vary above and beyond of 10% of value of work not done/ delivered. (This is company to company)
So we establish that the scenario above is not a case for PO, but for Penalty. Now penalty in construction business again is of three types (My understanding again from experiences)
a) Time/Schedule based penalty - Levied on vendor due to delays (Ranging for 100 SAR/ Day to 400 SAR/Day - if you are in Saudi)
b) Cost/ Quantity Based penalty - Deviation from Standard Plan/ over consumption against budgeted quantity in Bill of Ladding
c) KPI/ Quality Based Penalty - This can be a levied for number for reasons, including non completion of agreed deliverable in Contract. (This can be even 150% of contract value)
Now, penalty is a revenue to the Organization so this needs to be accounted differently. You apply a Penalty against a PO and create a Debit memo and show the penalty as revenue in the books. This cannot be done if this is entered as a PO.
So, my point is, you need a customization to capture the penalty and apply it against the PO and account it as a debit memo in Finance side.
Please let me know your thoughts, I will be glad to hear if I need to be corrected.
Rgds,
Abhi

Billing for partial amount

Similar Messages

Maybe you are looking for