Billing for shipment cost

hi all,
can anyone tell me how will add the calculated shipmet cost in to my billing,so that i adds to hte net value in the billing.
please do guide me if any configuration is required.
thanks.

HI
I did the settings in copy control for delivery to billing :
Pricing Source : F
after this
When I creating billing document (delivery related) using VF01 - I am getting the error:
0000500095 000010 Shipment 0000100020: Shipment Cost Determination is incomplete
Diagnosis: Copying Control for billing requires that shipment costs are copied from the shipments belonging to this delivery shipment costs have not yet been fully calculated for a shipment belonging to this delivery.
System Response: Billing is not completed
Procedure: Check the shipments belonging to the delivery
calculatye the shipments for all shipments
set the shipments as not relevant for shipment cost calculation, if necessary.
Can u please suggest how to solve this issue.
I checked the Shipment Document STATUS:
it says
Freight Cost Shipment Header Status:
Shipment costs Cal.: Completely Processed.
Shipments costs set: Completely processed
Complete Freight Cost doc. Status:
OvSts freight cost doc.status: partially processed
Tot Shp.Cost settlement status : Completely processed.
even i checked the vendor (forwarding agent) a/c. :the amount got posted to his account.
please advice me.
thanks in advance.
babu rao

Similar Messages

Issue in creating Invoice when route is not relevant for shipment cost.

Dear All,
We are facing a problem while creating an Invoice. The route used in shipment in not relevant for shipment costing. Shipment type is relevant for costing. So in normal scenario if I don't remove the tick mark from "Shipment cost relanace" at shipment type and proceed with Invoicing I get error as " SHipment costing is not complete", which is correct. The scenario works well if item/s in delivery are not batch split.
But, if items in delivery are batch split and "shipment cost relevance" check is not removed from shipment type then, only batch split items get copied in invoice. Header item is deleted and invoice gets saved, which should not happen.I don't get error in this scenario.
How should I make the error in invocie work in case of batch split items also? Could anyone please let me know?
Thanks!

Dear Manmeet Mohan K,
Can you please check the copy controls in between delivery document to invoice(VTFL)
Thanks&Regards
Raghu.k

How to create new scale basis for shipment costs without modification?

Hi,
at the moment I am trying to create a new scale basis for shipment costs.
It is not a problem to create a new scale basis in table view V_TVFRFQ. The creation of an Append structure in the communication structure KOMK is easy, too.
The problem is the following:
When creating a scale for a scale basis with transaction VS01, the system picks some screens out of function group V57S. For my new scale basis there is of course no screen in this standard function group.
So my question:
How to create/generate a screen to create scales for my new scale basis without a modification of function group V57S?
To me it makes no sense that SAP offers a possibility to create customer owned scale bases but then gives the customer no possibility to create an input screen for that scale basis without modification. Therefore I think it should be possible to generate such a screen in some way.
If you have some idea, let me know.
Thanks!
Christian

Hi Christian,
We are currently facing exactly the same problem you described in your message in January 2009. I see that you have marked this as "answered", and was wondering if you would mind explaining how you overcame this issue?
Any assistance would be hugely appreciated.
Many thanks,
Kaushik

Required BAPI for Shipment Cost Document (VI01)

Dear All,
I required BAPI for Shipment Cost Document (VI01), pls help on this.
Regards
Ranjit

Dear MM
Thanx for replying, but the BAPI which you have provided will only show me the Cost with correct Tax calculation,
But its not getting created, which system should show the Shipment Cost Document number.
Regards
Ranjit

Define upper/lower limits for shipment cost condition

Hi people, help please!
How can I define upper/lower limit for shipment cost conditions?.
The transaction TK11 has the functionality for upper/lower limits, but I can't find how to define it in customizing.
I follow the path Logistic Execution>Transportation>Pricing>Pricing Control>Define Condition Types, but is not like the transaction for pricing elements in condition types for sales.
How can I do it?
Regards.

The problem is on the class condition import limits.
I cant customize upper and lower prices for the shipment cost class condition and i cant find how define it or what else can I do.
The customizing transaction for shipment cost lass condition is not like sales price class condition, please look this:
For the shipment cost class condition follow the path SPRO>Logistic Execution>Transportation>Shipment Cost>Pricing>Pricing Control>Define Condition Types.
For the sales price class condition follow the path SPRO>Sales and Distribution>Basic Function>Pricing>Pricing Control>Define Condition Types, and take a look in Define upper/lower limits for conditions.
So then, when I go to functional transaction VK11 for the sales price condition y cant assign an import out of the limits defined. I need the same for shipment cost condition, transaction TK11, but I cant find where define the limits, as result, user can load any import without limits.
I hope the explanation is useful.

Changes log for shipment cost document

Hello all,
We are using shipment cost documents in both inbound and outbound processes, and currently changes in the SCD are not logged anywhere.
How can I keep track after the changes in the SCD?
Any help would be appreciated.
Regards,
Dikla

Hi Syed Hussain,
The flag for change documents for the shipments is already set.
My problem is with the shipment cost document and not the shipment it self.
When I create a shipment cost document it reflects in tables CDHDR and CDPOS as changes of the shipment statuses,
but when I change the shipment cost document after the creation - it does not show anywhere.
Are you familiar with a flag like the above, but for shipment cost documents?
Regards,
Dikla

No purchase order item was generated for shipment cost item

Hi Gurus,
When I am creating with reference to shipment no & shipment cost type, When I save the shipment cost, See the logs at the time saving.
The logs are showing in red :
No purchase order item was generated for shipment cost item.
Message no. VY633
Please enter a valid partner role.
Message no. ME351
May I know the reason for showing red logs at the time of saving. (When I check logs, it is showing red colors).
Please advice if I miss any thing.
Regards
Rakesh

Hi Rakesh,
Your customising is incomplete. Notes 506605 & 940532 will help you on this.
regards, david

No active purchase order item for shipment cost

Hi,
When I'm entering a shipment cost document for a shipment using Vi01, I'm getting an information like "No active purchase order item for shipment cost", When I check in the service procurement tab there is no purchasing document and entry sheet found.
Please let me know what is causing the problem and what needs to be done to resolve this
Regards,
Ashwin

Hi,
Does your shipment document contains any stage?This problem might be because of this reason.
Regards,
Sumit

G/L account determination for shipment cost

Hi Experts,
I am having a problem setting up account determination for shipment cost document.
When saving shipment cost document, SAP generates "service entry sheet" (PO) and GR with accounting document,
but I would like to change the default G/L account by shipping condition type.
So far, I have set up automatic G/L account (OBYC), GBB and WRX, but I could only define the default one.
Could you please advise if it is possible to change G/L account for freight accrual?
and if yes, how to change G/L account determination by shipping condition type?
Thank you
JK

Hi,
1. Menu Path: Logistics Execution > Transport > Shipment Costs > Pricing > Pricing Control > Define And Assign Pricing Procedures
Transaction Code: SPRO
Shipment pricing procedure is same as the standard pricing procedure and uses condition technique to retrieve the data from condition tables.
2. Pricing Procedure Determination for Shipment Costs:
Based on the combination of Item category Determination group, Service Agent Procedure Group, Shipping Type Procedure Group, pricing procedure is determined
Menu Path: Logistics Execution > Transport > Shipment Costs > Pricing > Pricing Control > Define And Assign Pricing Procedures
3. Search Procedure for the PO:
TPPt: Transportation planning point is taken from the shipment document
SCTy: Shipment Cost type is taken from the shipment cost document
POrg: /Pgr/Plant: Purchasing Organization, Purchasing group and Plant is assigned to the combination of TPPt & SCTy.
On these values the purchase order is searched for the Vendor mentioned in the shipment document
Menu Path: Logistics Execution > Transport > Shipment Costs > Settlement > Assign Purchasing Data
4. Automatic G/L account Determination
I hope this information will help to you.
Thanks & Regards
Raju
From the Transaction u201CGBBu201D and combination of General Modification key u201CVBRu201D and valuation class the G/L account is determined for the posting to the freight accounts.
Menu Path: Logistics Execution > Transport > Shipment Costs > Settlement > Automatic G/L Account Determination
From the Transaction u201CWRXu201D and value of valuation class as u201C u201C the G/L account is picked for GR/IR accounts.

Billing the Shipment Costs to the Customer

Hi,
In my scenario, I had created shipment document & shipment cost document, now what ever be the cost in that I want to charge to customer in addition of material price.
I had created condition type say KF00 in shipment & made it statistical. same condition is in my pricing procedure in SD.
In front of procing procedure I had made tick mark i.e. Transaction speciefic price procedure
In copy controll LF to F2, at item level I selected price source as shipment cost.
But still cost is not flowing in the billing document.
Please suggest what to do
Thanks,
kapil

Hi,
Refer this [http://help.sap.com/saphelp_erp60_sp/helpdata/en/d5/2285347860ea35e10000009b38f83b/frameset.htm]
and [Re: sap sd Transportation;
please check the copy control for Billing in the SAP Hep link
Regards,

Service entry sheet for shipment cost reversal - Change option is greyedout

Hi,
I need to cancel shipment cost document. Which is completely transferred to accounting. First i am trying to reverse the service entry with revoke acceptance . But system is not showing change button neither in toolbar nor under menu. can anybody help on this?

Hi,
For cancle the shipment cost you have to fallow these steps
1- VI02 -Delete the shipcost doc.
2- VF01 - cancle Billing doc
3- VT02 - Del TPPL doc.
4- VL09- Cancle PGI
5- VL02n Delete Delivery doc
Hope it will helpfull for you
Thanks

Tax Code in case oF ERS for shipment cost

Hi,
We are using Shipment cost documents to calculate the customer freight.
In shipment cost document, we need to transfer the amount to accounting.
In that case system will create PO automatically.
We need to activate ERS for all the vendors, in that case when we transfer the shipment costs to accounting, system is asking to enter Tax code.
We are not using Tax determination at all in shipment cost document.
Can't we use ERS without Tax code?
Where does this Tax code come from into the PO? is it through Tax determination condition technique?
is there any way we can deactivate Tax code?
Please suggest.
Thanks.

For Standard Materials, Tax code is defaulting from Info record.
As freight is a service, we only have Short text in the PO not the material.
Is there any way i can create info record for service materials? so that i can enter tax code in info record and that defaults into PO.
Thanks.

Automatic PO creation for shipment cost

Hi All,
For determining shipment cost, after shipment ends, it is required to create Shipment Cost Document.
Shipment cost document is created by VI01. In VI01, Once verified, select the Transfer Check box. This will automatically create a Purchase order and service entry sheet for the transporter.
To do this, where all config setting are be done in logistic execution.
Regards
Nidhi

Hi Nidhi,
You are right a new PO is created automatically which is a service PO against which the Payment is done to the transporter.
Settings:
You need the Maintain The combination of Trans Plan Pt, Shipcoct doc, Purch org, Purc Group and Plant
Under Shipment cost --->Settlement This determines under which purchasing org and pur group the PO is Created.
Also You need to maintain OBYC settings Based on the Valuation class and Account Mod Key you may have used.
Regards
Suchait

Service Entry sheet Creation for Shipment cost Document

Dear All,
While creating a shipment cost document .A service PO is getting generated in the back ground based on which a service entry sheet is created and LIV is made.But in the configuration we are mapping the Transportation planning point to Purchase organisation alone.
Can some one let me know whether the generation of PO in the back ground for a shipment cost document in the back ground is a standard SAP feature if so can you tell me the configuration steps.
Regards,
K.Vivek

Hi,
Creation of Service PO in shipment cost document is based on the following SPRO setting or T-code.
T code : T_56.
SPRO > LE > Transportation > shipment cost Document > Shipment cost types and item categoires.
Get into the details of item categoires, you can see the indicator Generate PO.
hope this helps.
Harish

Standard extractor for shipment cost information(appl.08)

I need some clarification on "08" extractors.
We are using BW30B with PI2003.1 on the SAP enterprise side. We need to transfer the shipment cost details like cost centre, business area, G/l account etc? We have shipment cost documents which have the accounting/cost center field KOSTL shown as 'Cost Center'='10-0HAD'; business area (field GSBER) as 1010. But the data is not getting transferred!
What we did was using Tx LBWE, the extract structure MC08TR0FKZ has been enhanced with the field KOSTL (MCCOMVTRLP KOSTL Cost Center). Similarly in the data source 2LIS_08TRFKZ (Shipment Costs at Delivery Item Level) shows the field KOSTL. In the data source this field is not hidden. In the table
ROOSFIELD for the data source 2LIS_08TRFKZ, the field KOSTL is present.
This has field "SELECTION" as value "P". Same for field KOKRS & GSBER!
We are getting the fields MATKL, MTART , PRCTR properly populated since
the extract structure and data source was enhanced with these fields
also and in Table ROOSFIELD, they also have field "SELECTION" as value
"P".
What are the possible reasons for above? am I using the wrong structure or such details cannot be transffered using standard means? What exactly is meant by "SELECTION" as value "P" in table ROOSFIELD for a particular field say KOSTL.
regards

Hello,
you should check the function module MCEX_UPDATE_08 if there is the internal table MC08TR0FKZ_TAB enhanced with your fields, because there this table is filled for the extract structure MC08TR0FKZ with the communication structures MCCOMVTTK, MCCOMVTTS, MCCOMVFKP, MCCOMVTRFKZ, MCCOMVTRLK and MCCOMVTRLP. Debbuging this function module will help to find out if your field is filled or not.
If it´s not filled i think it is easier to make an append on the extract structure and fill the field in the customer exit. Otherwise you have to modify the function module mcex_update_08 or the function modules SD_SHIPMENTS_SAVE, VTRBW_SD_SCD_SAVE or VTRBW_SD_SHIPMENT_DATA_SAVE.
Markus

Billing for shipment cost

Similar Messages

Maybe you are looking for