Bin to Bin transfer

1. Through which transaction we can do a bin to bin transfer?
2. When I try to do bin to bin transfer it is giving error, Quant is blocked, how quant gets blocked?
3.How I can remove this block?
Please advice.
Thanks,

1.Through which transaction we can do a bin to bin transfer.
Use LT01 to transfer material from bin to other.
2.When I try to do bin to bin transfer it is giving error, Quant is blocked, how quant gets blocked?
please check whether any physical inventory document is active without clearing, if so please clear it before using this bin.
3.How I can remove this block?
if it is manually blocked then use LS06 to remove the block.
Edited by: venkata Jagadeesh on Oct 17, 2009 1:18 PM

Similar Messages

  • Enhancement for bin to bin stock transfer

    hi,
    when i am using stock transfer bin to bin using LT01 transaction, an information message have to raise when same material/batch if destination bin already having.........
    i already searched enhancement for above process "MWMTO001" i am correct or not?
    Thanks
    Muthuraman.D

    Yes, that's correct. You are using the right enhancement.
    It has the LTAK and LTAP tables which is the transfer order tables. This function will trigger during the TO creation.

  • WM BIN to BIN transfer order and picking list

    Hi Guys
    I have a scenario where I need to print BIN to BIN transfers details
    After completing the transfer to destination BIN Ineed to print
    Which Interim storage type(Like 9 sereis 901----999) I need to link print code and printer
    what config settings required for this
    and also another similar scenario
    Picking list from warehouse against the sales order
    which interim storage type we need to link the printer
    we have already satnadalone storage types availble(100,120,1....)
    Kindly suggest a solution ,thanks in advance

    Dear Friend,
    Print determination is WM is done in transaction OMLV. Major steps include
    1. Define spool request.--> Here you define spools and how it should be configured like new spool request, delete after spool out put.
    2.Definition of Print code--> Here you assign form to each print code
    3. Assign Print code to movement type--> For each mvt type assign print code. In automatic determination of printer, system checks whether any print code is assigned to each mvt type in a warehouse.
    4.Assign Printer to Warehouse--> Once form and other information is determined in above steps, system checks for printer for a warehouse in this configuration.If no printer is assigned, then it will proceed to next step that is step 5 here below
    5.Assign printer to picking area--> Assignment of printer to picking area.If this paramter is not maintained then it will go to next step. That is step 6 here
    6.Assign printer to Storage type--> It will fetch printer if nothing is mentioned in step 4 & 5 above.
    7.Print Report--> Assign print program to ware house. This the last step in config.
    I hope this helps.

  • Bin to bin transfer bapi

    Hi Friends,
    In one customised tcode I want to have functionality to move sales order specific stock to different storage type & Bin.
    So if the stock is luying  in 5 bins for speciifc sales order 8552442 item 0010. I wan to move stock in one go to different bins
    Pop up I am planning is as below
    From Bin                     To Bin
    xxx                              aaa ( This will be put manually by the User)
    yyy                              bbb ( This will be put manually by the User)
    zzz                              ccc ( This will be put manually by the User)
    I want to have only one  TO for this
    I am confused whether I need to use bapi L_TO_CREATE_SINGLE or L_TO_CREATE_MULTIPLE.
    Thanks,
    Kiran

    For TO creation you can use an example like below:
    call function 'L_TO_CREATE_SINGLE'
    exporting
    i_lgnum               = wh_number   "Warehouse number
    i_bwlvs               = '999'                 "MvT999
    i_matnr               = lqua-matnr  "Material no.
    i_werks               = lqua-werks  "Plant
    i_lgort               = lqua-lgort  "Storage location
    i_anfme               = lqua-verme  "Requested Qty
    i_altme               = lqua-meins  "Unit of measure
    i_letyp               = ltap-letyp  "SU Type
    i_vlpla               = lqua-lgpla  "Source storage bin
    i_vlqnr               = lqua-lqnum  "Quant
    i_vltyp               = lqua-lgtyp  "Source storage type
    i_nlpla               = ltap-nlpla  "Destination storage bin
    i_nltyp               = v_nltyp     "Destination storage type
    i_squit               = squit
    importing
    e_tanum               = l_tanum
    e_ltap                = l_ltap
    exceptions
    no_to_created         = 1
    benum_missing         = 2
    bwlvs_wrong           = 3
    betyp_missing         = 4
    foreign_lock          = 5
    vltyp_wrong           = 6
    vlpla_wrong           = 7
    vltyp_missing         = 8
    nltyp_wrong           = 9
    nlpla_wrong           = 10
    nltyp_missing         = 11
    rltyp_wrong           = 12
    rlpla_wrong           = 13
    rltyp_missing         = 14
    squit_forbidden       = 15
    manual_to_forbidden   = 16
    letyp_wrong           = 17
    vlpla_missing         = 18
    nlpla_missing         = 19
    sobkz_missing         = 20
    sonum_missing         = 21
    bestq_wrong           = 22
    lgber_wrong           = 23
    xfeld_wrong           = 24
    date_wrong            = 25
    drukz_wrong           = 26
    ldest_wrong           = 27
    update_without_commit = 28
    no_authority          = 29
    material_not_found    = 30
    lenum_wrong           = 31
    others                = 32.
    You can call this FM more than once if you want to transfer more items,
    or you can call L_TO_CREATE_MULTIPLE if you want to create more items
    in one FM call.

  • Bin to bin transfer from SU managed storage type to NON SU storage type

    Hi Experts ,
    Kindly guide as how i can  perform  Bin to bin transfer from SU managed storage type to NON SU storage type
    Thanks
    Jinoy

    There is no particular technique for this. You can use single or collective method (LT01 or LT10).
    Provide the source SU and destination storage type and bin and save the TO. Your transfer will be complete.
    The SU number will be lost because you have moved the stock to a non SU storage type.
    Regards,
    Aroop

  • Bin to BIN transfer storage unit

    Dear All,
    I am moving the stock from open bin to actual bins but system is creating a new storage unit number.  But when I transfer from normal bin to normal bin system keep the same SU number. My requirement is to keep the same SU number when moving from open bin to normal bin.  Could you please advise how can I do this.
    Regards
    Sakkir

    when you transfer partial quantity from a source storage unit to another bin it creates a new Storage unit number and when you transfer full quantity of a source storage unit to another bin then system retain the same storage unit number.
    In your case it seems when you are transferring the stock from open to actual bin then the quantity is partial hence system is creating a new storage unit number and when you are doing actual bin to bin then you are transferring the full quantity hence system is retaining the same storage unit number

  • Bin to Bin transfer steps - Other than LT10(Stock List)

    Hi All,
    For internal stock trnasfer within warehouse, - bin to bin transfer, please let me know all the possible ways/methods to do it.
    One process I am aware is to Create TO using stock list - LT10,
    But can I create TO manually for bin to bin transfer ?? If yes, plz tell me input details - mainly movement type.
    Is there any other method for bin to bin transfer steps in SAP?
    Thanks,
    Ravi Davda

    Hello Hari,
    Thanks for your inputs.
    I tried for above solution.I did not select confirm TO check box in LT10 but still when I go to LT12 transaction to confirm this TO system does allow me change the quantity as it shows all the entries in display mode (not editable).
    Is there any customzing setting involved in this....? How to do that?
    Regards,
    Munish

  • Bin to bin transfer control

    Dear All,
    User request to restrict some bin to bin stock transfer between some specific storage types.
    ex. 320 --> 321 allowed
         302 --> 320 disallowed.
    Is there anybody knows how to make this control in configuration ?
    Thanks in advance
    Regards
    Corey

    Dears,
    I've tried enhancements MWMTO001 and MWMTO003 but not work.
    Is there anyone know which enhancement I should set up?
    Regards
    Corey

  • Re : T-code for bin to bin transfer

    Hi
       Any one tell me T-Code for Bin to bin transfer.
    Thanks
    Anto

    Hi,
    use LT01 for moving the stocks from bin to bin.
    Regards
    Anand.

  • Stock transfer from bin to bin

    hi,
    In stock transfer from bin to bin process i need solution for the below requirement...
    a)The system must raise a warning when a material is transferred to another bin, which already contains the same material with a different batch number.
    b)Transferring stock to a single batch location which already contains another material/batch is not allowed.
    In bin to bin stock transfer  process, it is possible by  system   to propose destination bin  automatically ?
    Thanks
    Muthuraman.D

    The requirements that you have may be fulfilled using 'mixed storage' options available in the storage type configuration. However, there are rigid prerequisities to use certain options such as usage of storage unit management and bulk storage strategy. You may look into a custom putaway strategy (MWMTO003) to fulfill your requirements. 
    As for automatic proposal of bin during bin-bin transfer, it is pretty much the same set up that you'd use for any other putaway. This includes, enabling storage type search (sections & bin type, if applicable) along with indicators, defining the relevant putaway strategy, and assignment of indicators in the material masters.

  • Bin to Bin transfer(Urgent)

    Hello Guys,
    I have a question. We have a problem in warehouse and can anyone help me out of this scenario:
    We have a warehouse, and we perform cycle counting to check the inventory. We want all the bins to hold the same quantity (say 100), if a bin has more than 100 items it is moved to the next neighbouring bin. So, all the bins exceeding 100 items (unique) get into a  "NEW" bin and consequntly the count in the bin increases (from 0 to 100). In this process,
    Say bin 1 is the bin from which material is removed and bin 2 is the bin to which material needs to be transfered. The status of the material in "Bin 1"is "unrestricted" but when it moved to "bin 2" it needs to be turned to "Block" until the bin gets filled completly. After the bin gets the required count(100), the status of the material needs to be changed back to "unrestricted".
    Note:
    1.Material used is unique
    2.Bins can contain more than 100 items, but to make all the bins contain equal amount we carry out the process (making all the bins to contain equal amounts)
    2.Status of the material needs to changed from un-restricted to blocked (during bin to bin trasfer) and back to unrestricted after the count is reached
    Please help me out as early as possible, as I really need it very fast. Thanking you, in advance and hoping for a positive response from you, I take leave.
    Regards,
    Gandluri Srinivas

    For  LQ02 -  Movement type 344 not  showing up  here's what you need to do:
    go to
    SPRO - Logisitics Execution - warehouse management - interfaces - inventory management - define posting changes
    Here select any exisiting entry, copy it and edit it . It would probably look like this
    <WHNO>. 344 Posting change-blocked 344 -- S
    The "S" in the column Stock category destination is imp and you can se it to S - blocked.
    This will add 343 & 344 for allowed posting changes for that particular warehouse and then it'll visible in the dropdown as well.
    For blocking bins go to trx LS06 and block the bins there , you can do that via LS02n too by selecting the bin and in the status tab, selecting the "stokc removal block"
    Hope this helps.
    Reward points if this helped you!

  • How to create a RF screen for doing bin to bin transafer(LT01) IN WM

    Hi Gurus,
    I need your inputs on this.
    My requirement is to build a RF console for doing the bin to bin transfer as like LT01 currently there in ware house management.
    SO, pls guide e me how can i link already existing standard sap LT01 to the RF CONSOLE that i am going design.
    Would appreciate for an early reply

    Hi,
    Pl refer OSS note 13006 which says
    It is not possible to transfer vendor consignment stock from one plant to another plant (movement types 301 to 306 for special stock 'K').
    A stock transfer by means of a delivery is also not supported (movement types 641, 643, 647).
    Cause and prerequisites
    This program function is not supported.
    In order to implement this program function, it would be necessary to find a solution to the business-related aspect of the valuation problem:
    Since the consignment price of a material from a vendor can be different in the two plants involved, it would be possible to manipulate the consignment liabilities towards the vendor prior to consignment withdrawals by performing a transfer posting and thus transfering the consignment stock to a suitable plant.
    Solution
    You can post the stock transfer in two steps:
    1. Post the stock issue in the issuing plant using movement type 562 in combination with the special stock indicator 'K', for example.
    2. Post the stock receipt in the receiving plant using movement type 561
    in combination with the special stock indicator 'K', for example.
    Hope this is helpful.
    Regards,
    vijay

  • BIN to BIN transaction error

    Hi experts,
         Recently I've received an error "1250000017 - Receipt warehouse cannot be identical to the release warehouse." in Bin to Bin transfer. Have you encounter this one? Can't find similar post with this.
    Regards,

    This is for my Bin to Bin
                                        .Lines.ItemCode = oDrView("product_reference_code")
                                        .Lines.Quantity = oDrView("quantity")
                                        .Lines.DistributionRule = oGetDim1(oDr("site_reference"))
                                        .Lines.DistributionRule2 = oGetDim2(oDr("site_reference"))
                                        'BIN to BIN Transfer
                                        .Lines.BinAllocations.BinActionType = SAPbobsCOM.BinActionTypeEnum.batFromWarehouse
                                        .Lines.BinAllocations.Quantity = oDrView("quantity")
                                        .Lines.BinAllocations.BinAbsEntry = BinLoc(oDrView("old_location"))
                                        .Lines.BinAllocations.Add()
                                        'oQuantity += oDrBin("quantity")
                                        'If oCount = oRows Then
                                        .Lines.BinAllocations.BinActionType = SAPbobsCOM.BinActionTypeEnum.batToWarehouse
                                        .Lines.BinAllocations.Quantity = oDrView("quantity")
                                        .Lines.BinAllocations.BinAbsEntry = BinLoc(oDrView("new_location")) 'BinLoc(oDrBin("location_code"))
                                        .Lines.BinAllocations.Add()
                                        'End If

  • Bin to Bin error

    Hi All,
    Can not Bin to Bin ...getting error message
    Can't explain why this is not working....may be because base unit is kg's?  This is material that has been returned to us.  The bin is the Delivery number (xxxxxxxxx) , but when try to take out the amount for one pallet you get the pop up message (requested amt couldnt be supplied.)    But , next I did a bin to bin with 1LB and it took....but then when I tried to bin it back....it left rounding amount?   So basically there are two questions.....why will it not let us break this down...and why did it leave rounding amount in bin for just a regular bin to bin?  I have shipping had to do a LT01 (manual TO) to get the amounts moved?
    When I did next bin to bin, I only did 1lb and it took?
    Then I bin to bin back the 1lb and it left material in bin

    SAP says in OSS 1595843 - No warning message is issued for a short pick in transaction LT01 :
    Transaction LT01 is use for internal warehouse moves (bin to bin transfer). Even if the requested amount is higher on the initial input screen, it is only physically possible to move what is actually available in that bin. As the TO is always manually created, it is assumed that the warehouse operator is aware of the stock that is being moved from point A to point B.
    Read the full note it has a resolution for you

  • How to do BIN to BIN transfers in WM

    Hi Guys
    How to do BIN to BIN transfers in WM
    And also warehouse to ware house transfers

    Please use LT10 ,in this you mention warehouse , storage type & bin from which material is to be transfered& then execute. This will take you to stock transfer overview screen where you can select the line of storage bin & press stock transfer foreground button. After pressing it will take you to screen "Specify destination data "where you can select required storage type & bin. After selecting these details you can press copy & then system creats TO for you.
    If you select display log it will display TO
    OR
    Use t-code LT01 also, use the movement type 999 for internal transfer Bin to Bin with the same storage type, next step input the related information, for example, which parts from which bin to the destination bin? How many quantity? Then click the button of "Execute", that's okay!

Maybe you are looking for