BIOS flash went wrong? stop errors, boot disk error

Hello, I need help.
I tried to update to bios 4.0. It seemed to have gone well. I then upped my fsb 5 to 205 because I could. BSOD- stop error. So I put back to old settings... Same thing. Then I greatly reduced settings...again, same thing. I tried usin repair with my win2k disk. BSOD- "inaccessable boot disk" and told me to "run chkdsk / f."
I tried to boot into safe mode command prompt so I could run chkdsk /f, but I got the BSOD stop error again.
I reverted back to previous bios 3.9. But that did not solve my problems.
I am guessing I need to repair the HD boot sector? Whenever I get a stop error it tells me it "cannot find dll winsrv" or something like that.
Any help on how to get this thing back up and running would be greatly appreciated. Thanks!

Had nothing to do with RAM or boot record. Since the machine was telling me to chkdsk, i took out the HD and put it in another machine. I ended up repairing windows on that machine, then taking it to my machine and it worked. I can't explain the strange errors I got, but at least I fixed the problem.
Thank you for your responses.

Similar Messages

Thinkpad Edge E530 BIOS Update went wrong

I was updating BIOS using the utility given in Lenovo site. But it went wrong and my E530 is bricked. I'm planing to recover the BIOS using Phoenix Wincrisis .. But for that i Need the bios.wph file. I tried to extract the .wph file (using 7zip) from the Bios update .exe file given in lenovo site .. But I Cant find a .wph file in it.. It contains a [0] file.. Tried to extract that '[0]' file using 7zip. But 7zip cant open the archive. My E530 is still bricked .. Someone please help me as soon as possible. Thanks in advance

Hi Yasarharafath,
I am sorry for the delay in reply!
I am glad to hear that your system is now booting after using Phoenix Wincrisis Tool. But for this new issue suggest you to check with uninstalling ACPI adapter from the device manager. Remove the battery from the system & power on the system from connecting ‘Power Adapter’. Wait till the system boot completely and then go to ‘Device Manager’ then uninstall ‘Microsoft ACPI-Compliant Control Method Battery’ under battery option. After uninstalling shutdown the system, remove ‘Power Adapter’ and insert the battery then switch ON the system and check.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

"Oops, something went wrong." error message when t...

Since I was forced onto the new version of Skype due to the deprecation of historical versions I have been unable record a video message. Whilst I am able to participate in video calls with no hitches at all, attempting to record a video message instantly gives me the following error message:
"Oops, something went wrong.
Please try again, or get in touch if you need help."
Unfortunately, Microsoft struggle to implement error codes in their software, I can only assume this is because consumers find technical looking numbers terrifying, so I have absolutely no idea what the problem is - it could be a near infinite number of things.
I have done a full reinstallation of Skype, multiple times, including deleting all registries that are associated with Skype (as suggested in the Skype support site), clearing any obvious user caches that exist, and so on. Still, the problem persists. Not a single video source available on my computer allows the recording of a video message, so I do not believe this is a problem with my webcam or driver.
Running Windows 7 Home Premium 64-bit, Skype 6.18.0.106.
I would appreciate any suggestions to solve this frustrating problem. Thank you.
- BanTheCatEmoji

Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Sorry, Something Went Wrong, Unexpected Error Occurred

Having a very strange issue with main SharePoint 2013 Page after upgraded all the way from 2003 to 2013. Initially setup 2013 Web App for just http and I could log in with my user account and do all things for which there are assigned privileges. Then converted
to SSL and I receive the Sorry, Something Went Wrong error on the main page. No other user account we have tried has any problem whatsoever. This is currently an upgrade test environment but am very worried that we will encounter other users that have the
same problem on the main page or some other site page. Thing is, I cannot find a single log entry that contains the Correlation value in the error report and it is only when hitting the site using SSL. It does not matter what computer I am using (tried multiple).
The other users testing have no issues so far.
Additional testing. When I change back to http set in Public URLs I have no problems but others do. When set to https in Public URLs I have problem and they don't. However, I was the first and only one, other than farm account (which never has problems)
to work on the site using straight http.
Any help on this would be appreciated. I have scanned through table upon table in the User Profile database thinking there must be something in there messing with profiles or setting some sort of default but cannot think of a thing. App Pool needs to be
restarted in addition to IISRESET?

Are you talking about central administration (e.g. "main SharePoint 2013 page")?
if yes, make sure to set bindings in IIS to include a certificate, preferably a wildcard * cert. and then run
Set-SPCentralAdministration -Port 443
https://technet.microsoft.com/en-us/library/ff607832(v=office.15).aspx
If you're talking about your team site, for ex. make sure you set binding for https on the site in IIS and use a wildcard cert.
You can run a Merge-SPLogFile -Path c:\SP-error.txt -Correlation Input-Your-CorrelationID-Here and then paste the results on this blog and the group can help you, better if more info is provided.
If there is a correlation ID, you can get it with Merge-SPLogFile.
https://technet.microsoft.com/en-us/library/ff607721(v=office.15).aspx you may have to use start and end times.
Stacy Simpkins | MCSE SharePoint | www.sharepointpapa.com

"Uh-oh, something went wrong! Error Code: 503"

I keep getting this error code and I've tried everything to fix it but nothing works. Also it only happens on my computer nobody elses

In the past, if it is not due to the firewall I would recommend trying a new profile:
*[[Use the Profile Manager to create and remove Firefox profiles]]
Does this happen in other browsers too?
This was an interesting reference, but it is a common troubleshooting step on Windows: [http://boonforums.com/index.php?threads/how-to-resolve-the-uh-oh-something-went-wrong-error-code-503-error.4586/]

Something went wrong there ERROR MESSAGE

I am trying to add money to my account. I go through it all, then I get
a pink box with the words: Something went wrong there.
I am in Saudi Arabia, can we add money here?

Hi,
Please check the link:
/people/marc.bernard/blog/2008/10/10/how-to-filter-messages-created-by-bi-ip-planning-functions-and-sequences
Please check the Q&A section of above weblog which mentions about
function module RRMS_MESSAGE_HANDLING which could be helpful.
Regards,
Amit

What went wrong with encoding the disk?

I started burning a disk last night before I went to bed (about an hr and 15 mins of video) and watched it start the process of going through processing menus, slideshows, and video. I woke up and disk was ejected and I placed the disk in another mac, and the mac asked if I wanted to mount it as blank disk. I checked the "Get Info" on the disk and it was blank. I just tried to burn it again in iDVD on my Macpro, though it did not recognize it as a blank disk. I now have another blank disk in the macpro going through the process of burning a disk. Anyone have any ideas why this might have happened?

There is no indication of any error in the part of the trace that you posted. If this alert log trace entry and associated trace file is created every time the rman backup is ran and there is no error number or formatted dump information in the trace file then the trace may just be a left-over from development debugging. Oracle development has been known to forget to turn off trace and debug information before releasing the code to production in the past. This may be another example.
Otherwise you need to post the error messages in the trace.
HTH -- Mark D Powell --

MOVED: Flash Went Wrong

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=96491.0

Had nothing to do with RAM or boot record. Since the machine was telling me to chkdsk, i took out the HD and put it in another machine. I ended up repairing windows on that machine, then taking it to my machine and it worked. I can't explain the strange errors I got, but at least I fixed the problem.
Thank you for your responses.

K8N Neo4 Bios Flash to 1.8 Wont Boot Past Windows XP Loading

I just flashed my bios to version 1.8....i cant it to post past the windows xp boot screen.....anyone know why and what i can do??!!?!
Everything was fine before running 1.5....

Quote from: sixth on 03-September-05, 08:26:28
I just flashed my bios to version 1.8....i cant it to post past the windows xp boot screen.....anyone know why and what i can do??!!?!
Everything was fine before running 1.5....
I read a thread somewhere in this forum saying 1.8 is good if you have Sempron (E6?). If by some reason you have to flash 1.8, search for User syar2003's post. I followed his procedures and I flashed 1.6 successfully. Bios 1.5 gave me a lot of troubles.

15-d001au bios flash gone wrong .....

hi. after doing a bios update off the hp website, the computer went through the reboot cycle, but it didnt even attempt to restart. just fell to a black screen and has not done a check or anything. i am wondering if this unit is suitable for a win/b key bios restoration or not? everything i have tried as current has failed. what are my options for trying to restore the bios on this laptop? thanks. mangoat

nevermind all, fixed it up with the hp diagnostic software.cheers.

Please help:System keeps rebooting after Bios flash update

Hello,
Ok for starters I have the K9A2 CF motherboard,4GB of ram,My last Bios was 1.8.
I was flashing to 1.9 using the bios flash tool and a usb 1GB stick.The Bios flash went without errors and I rebooted.After this I booted back up.It gets to the 512Mb on the screen then poof,the system reboots automatically and keeps doing so thereafter unless I shut the PC off.How can I restore my Bios or fix this issue.This is not good as I cant even get to the post screen before it reboots to change anything.
Thanks,
K9A2 CF board
Windows Vista 64
4GB Corsair ram
80GB Stata HD
200GB IDE HD
DVD-RW Drive

Quote from: soldat32 on 06-August-09, 05:16:16
CPU Type QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
No errors were found in my memory.My PSU seems to be working fine.My VGA is a XFX Nvidia 9600GT with 512mb.
Have you tried that?:
Quote from: Svet on 06-August-09, 03:52:32
Try with your second stick alone in the same DIMM slot.
Quote from: soldat32 on 06-August-09, 05:16:16
CPU Type QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
Its 125W CPU.
Can you shows picture of your board? Is it V2? Is there a heatsink over mosfets?:

After BIOS flash, case buttons no longer work 790FX-GD70

Hello,
I was getting a Hypersink flood error and with much research found that a flash of the bios is a fix for this.
I have flashed the BIOS plenty of times on other motherboards. BIOS flash went smoothly (I used this forums bootloader). Ever since flashing of the BIOS, I can't turn on the computer unless it is through the power button on the motherboard itself. I have tested the switch independently and they work fine. Post is fine, runs windows fine, time and date are correct, etc...
Anyone have any ideas on how to fix this?
Equipment:
Motherboard: MSI 790FX-GD70 c3
Chip: AMD Phenom II x4 955
BIOS software: Latest version

After an update of BIOS, pull power cable out and clear CMOS.
However, I am not sure the BIOS update and a non-working power-button are related. What case have you got?
Please say if your system uses a PSU, and if so name and model.

Oops! Something went wrong! - Re-occuring Problem for multiple accounts

Good morning.
My company switched all of our computers to Windows 7 and updated our software to Microsoft Office 365 about six months ago. Since then, it has been all but impossible to do our jobs properly. And Tech support is unable to help us. All
of their "fixes" were temporary at best and now the problem seems to be spreading.
In the process of doing our jobs, we have to send anywhere from 5 to 50 E-mails in sequence. Since all of the E-mails are basically the same thing, just with a different PDF attachment and a slight change to the subject line, we have been duplicating
them. Using the subject line, we use "Control F" to duplicate the E-mails. Two of us attach files after duplicating the necessary number of E-mails and two of us attach them as we duplicate. After setting up all the E-mails we need, we
send them in order.
When we had the older version of outlook, this was not a problem. With Outlook 365, two of us (Including myself) have constantly received an "Oops! Something went wrong." error message whenever we try to send the duplicated messages.
And as of today, three of us now face this problem. This is outrageous. This is a program designed to send E-mails and I do not understand why it cannot send E-mails?!
Tech support has attempted to fix the problem by creating a new profile for us. This solution lasted anywhere from 3 hours to 3 days before the problem returned and at this point, I have 5 profiles on my account that I switch back and forth between.
They even replaced the entire computer once, it took all of two hours for the problem to come back.
In the beginning, I was the only one with the problem. In order to perform a test for someone in another Microsoft forum, I loaded one of the other girls profiles onto my computer. While I did not keep her profile on my computer long enough to
recreate the problem, it developed on her own computer shortly after.
Another co-worker came back after a week of being sick to find that the problem has just started on her computer also. She specifically has been designated to send all of these E-mails since until now, she was the one who could. In addition,
when she attempts to duplicate an E-mail, the image in the body of the E-mail changes color and three of the pictures disappear. This happens to another co-worker, but not to me.
We're on an exchange server if that matters at all. And we use a SharePoint server for storing some files in case that matters too. We really need help. We already had to make the company drop $50 per person for the sole
purpose of allowing us to print paper files in order. Not that I actually believe there's some sort of magic software that can duplicate E-mails and successfully send them. But we need something that actually works.
I am extremely disappointed with Microsoft Office 365, Outlook 365 especially, it has done nothing but fight us the entire way. I know a little more about computers than most of the people in my building and I cannot get anything to work the way it's
supposed to. The inability of this technology to work properly has slowed our output to 50% of what it was, unacceptable. Is very frustrating and I don't know how much longer we can keep going like this. We can't get any proper help.
Thank you for your time.

I believe the "Oops" error text is specific to only the web email app (OWA), not the desktop client. Do you get any other error details or error numbers? Regardless of what app you are currently using, it may be worthwhile
to try the other method you are NOT using (e.g. try the Outlook desktop client if you get the error in OWA, or use OWA if you get the error in the client) just to see if the behavior differs.
Eric Legault (MVP: Outlook)
Co-author, Microsoft Office 2013 Professional Step-By-Step
Try Outlook Touch!

Search Result Web Part - "Sorry, something went wrong " Unless users have edit rights.

I have a SharePoint 2013 farm. On content pages, we are using search result web parts. If the user has edit rights, they work but if the user has only read rights there is a "Sorry, something went wrong." Error.
Thanks for your help in advance.

This is a pretty generic error in SharePoint that can be caused by any number of things. You can take a look a the Web Parts Maintenance Page by adding "?content=1" to the URL of your page. If you recently added a web part to the page or some other customization,
this will allow you to turn it off.
More than likely though, you will have to do some digging. Whenever you are in that page and get an error, you get a correlation id like in your example above. You can dig deep into the logs by finding them (typically in C:\program files\common files\microsoft
shared\15\logs). Look for the most recent file and do a search it in and see if you can find that correlation id. If you can't find it you might try the previous log. When you find matching entries for the correlation id, you should get some idea to the component
that is failing and causing your issues.

How I make a boot disk

Hello.
I'm an absolut Linux beginner and I tried to install archlinux on an external HDD, because my internal windows drives are dynamic logical Volumes and this doesn't work with Linux.
After the installation from the CD I noticed that I cannopt boot from USB HDD because of the BIOS.
How I make a boot disk (floppy) now ? The wiki guide doesn't help because if I boot from the installation CD I don't have the command fdformat and the command pacman - S grub works neither.
Can you help?
Best Regards
BX-8017
Excuse by bad language please, I'm not english!

Ok,
I found a grub boot disk on the net, it was a super grub boot disk. I deleted nearly all files and just copied my files from /boot/grub in the grub directory of the floppy disk. I used the windows tool "explore2fs" to get acces to my boot partition with the grub directory.
Her is my menu.lst:
# (0) Arch Linux
title Arch Linux
root (hd2,0)
kernel /vmlinuz26 root=/dev/sdc1 ro vga=773
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd2,0)
kernel /vmlinuz26 root=/dev/sdc1 ro vga=773
initrd /kernel26-fallback.img
# (1) Windows
title Windows XP
rootnoverify (hd0,0)
makeactive
chainloader +1
It doesn't work, because the hd 2,0 is not found from grub. (Selected disk does not exist)
It seams that grub is not recognizing my usb hdd at start up ?!?! but this cannot be, because during the installation process it is.
Many Thanks
BX-8017
PS The possibility to boot Arch with the Windows Bootmanager is interesting. Maybe we can discuss this later.....
Last edited by BX-8017 (2007-07-18 15:36:57)

BIOS flash went wrong? stop errors, boot disk error

Similar Messages

Maybe you are looking for