Biztalk 2013 SMTP.Subject and SMTP.EmailBodyText Missing:
Hi:
Neither SMTP.Subject nor SMTP.EmailBodyText are passed to the SMTP email. Appreciate any hint.
I have a Orchestration Messages, EmailMsg, of Message Type System.Xml.XmlDocument. Inside a ConstructMessage, I have a Message Assignment with the following code.
WHOrchestrationDynamicSend(Microsoft.XLANGs.BaseTypes.Address)="mailto:myemailladdress.com";
EmailMsg = PurchaseOrderMsg;
EmailMsg (SMTP.Subject) = "Message from Vendors EDI Orchestration:";
EmailMsg (SMTP.EmailBodyText) = "VenderEDI Sender Identification Number: " + PurchaseOrderMsg.SenderId + " processing.";
EmailMsg (SMTP.EmailBodyTextCharset)="UTF-8";
The dynamic port uses SMTP adaptor correctly. Sends an email with body equal to PurchaseOrderMsg. Awesome.
However, neither SMTP.Subject nor SMTP.EmailBodyText are passed to the SMTP. The Subject is a GUID and SMTP.EmailBodyText nowhere, I can see.
Appreciate your help.
Regards, Toraj
Toraj [email protected]
Hi Toraj,
You can look at below samples
http://www.nullskull.com/a/1408/sending-smtp-email-from-within-biztalk-orchestration.aspx
http://msdn.microsoft.com/en-us/library/ee253647%28v=bts.10%29.aspx
http://abdulrafaysbiztalk.wordpress.com/2008/11/20/sending-an-html-formatted-e-mail-message-from-biztalk/
Thanks
Abhishek
Similar Messages
-
BizTalk 2013 R2 Accelerator for HL7 is missing MSH_26_GLO_DEF.xsd file under templates. Can anyone please help me on this.
Is there a way to report this issue to Microsoft?Hi Sandeep,
Thanks for your feedback in BizTalk forum.
From your description above, I can hardly give precise troubleshooting for this issue, please give more explanation about what happens.
>> Is there a way to report this issue to Microsoft?
If you cannot determine your answer here or on your own, consider opening a support case with us. Visit this link to see the various support options that are available to better meet your needs:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
BizTalk 2013 choice for "999" file type missing in Party Agreement configuration
Ok guys--this makes no sense. In BizTalk 2010, we were able to select the 999 file type in the party Config/Agreement section, specifically in the "Envelopes", "Local Host Settings" & Transaction Set List" sections under
"Transaction Set Settings". I could see if this was a 997 file type as that should be deprecated under 5010, but this is 999, the new format.
Since my experience with 2013 is limited, can anyone tell me if there is a service pack or CU we missed when this was setup that might include this? A setting somewhere perhaps?
Any assistance is appreciated--thanks in advance---
TomConfirmed as bug / oversight in Biztalk 2013 -Ugh
Hello Scott,
We did an in-house repro and realized that this does not work.
It seems in BizTalk Server 2010, we had 999 listed under the
supported transactions list, but it is somehow not listed in BizTalk Server 2013.
We have raised a ticket to the Product Group to review this and make the required change. However, we do not have an ETA by when this change will be implemented.
Thanks,
Kshitij
Scott K Berger -
Biztalk 2K13 or R2 and BizTalk Adapters for Enterprise Applications
I have a BTS 2K13 (upgraded to 2K13 R2), when trying to do "Install MS Biztalk Adapters,
Steps 1 finishes with success
Step2 as well
Step 3 as well
Step 4 Install Microsoft Biztalk Adapters for Enterprise Applications fails with a very strange message £
"Microsoft Biztalk Adapters for Enterprise Applications requires MS BTS 2013. Installation cannot continue".
followed by a 2nd dialogbox indication "Adapter could not be installed. Please try running the setup again to install this adapter"
This also happened before upgrading to R2Thanks for your helpHI eliassal,
We discussed the topic about upgrading to BizTalk Server 2013 R2 before. You need to run the setup for BizTalk 2013 R2 installation and you will be prompted for upgrade as setup itself detects the lower version i.e., 2013.
You can follow the link for upgrading:
http://blog.jeroenmaes.eu/2014/06/upgrade-from-biztalk-server-2013-to-biztalk-server-2013-r2/
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
BizTalk Server Developer 2013 Vs BizTalk 2013 R2
I would like to know that if user production environment is BizTalk 2013R2.
Can I use "BizTalk Server Developer 2013" for my development? Does they compatiable?Yes it’s possible.
BizTalk 2013 R2 support both .NET Framework 4.5 and .NET Framework 4.5.1 not just 4.5.1.
Artifacts from BizTalk 2013 are .NET 4.5 and they are compatible with BizTalk 2013 R2 environment and hence they can be deployed in BizTalk 2013 R2 – Technically it’s possible.
Refer the platform supported section in this MSDN article.
https://msdn.microsoft.com/en-us/library/jj248703.aspx
Then the question comes, would I do this? I will not. But if you don’t have an option, you got to use BizTalk 2013 in BizTalk 2013 R2, then I can. And for future development I would use BizTalk 2013 R2 environments for BizTalk 2013 R2 deployment.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Attachment File non-English Name DISAPPEARS problem in BizTalk 2010 SMTP Adapter
Hello ,
I'm using BizTalk 2010 SMTP Adapter for sending mail with attachments by setting them via property SMTP.Attachments
//Attachment
msgEmail(SMTP.Attachments)= AttachmentList;
I have files in several languages (In English and in Russian partialy) for the example
My attachment list looks like this:
"C:\Temp\Files\EnglishNameFile.xml | C:\Temp\Files\RussianFileName_РусскоеИмя.xml";
After the sending Mail with this attachments the second file (it's name partialy in Russian) received without this part name
(The non-english part of name is DISAPPEARS)
like this:
RussianFileName_.xml ( must be RussianFileName_РусскоеИмя.xml)
The NON-English part is DISAPPEARS!!!
And if i have file that doesn't have latin latters (non-english) at all than BizTalk SMTP Adapter change name
to default one like ATT41233.xml
I found this behaviour occur in other non-english languages also!!!
Unfortunately i'm not found any info about this
Any help would be very
much appreciated
VadimRefer to this link -
http://social.msdn.microsoft.com/Forums/en-US/163a47cf-db31-49a5-9ee3-ce9272ba24ff/setting-contenttransferencoding-in-dynamic-smtp-port?forum=biztalkgeneral
There is an option of the Multipart message that controls the filename and the charset used to control how the attachment is treated, including content-transfer encoding.
Regards. -
UNIONS and Discriminant Value mapping using BizTalk 2013
We're converting our old BizTalk 2006 TIObjects to BizTalk2013 and have used the TIConversionTool. We are finding that the majority of TIObjects are converting successfully. But we have 2 cases where we have used UNIONS and Discriminant Values to allow
different but similar requests to call one mainframe program. When running the TIConversionTool, it looks like the UNIONS and Discriminant Value mappings are being dropped. Does anyone know how UNIONS are handled in BizTalk2013? Shouldn't the TIConversionTool
keep the UNIONS and DV Mappings? Is there a way to go in and add the Union and the DV mappings manually? Thanks!Hello,
Have you used HIS 2010 or HIS 2013 together with BizTalk 2013 in order to convert the TI Assemblies from HIS 2006 ?
Best Regards,
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.com -
Microsoft BizTalk Adapters for Host Systems Missing with BizTalk 2013
Hi All,
I am using BizTalk 2013 and looking for Microsoft BizTalk Adapters for Host Systems but cannot find it on Installation disk.
Do any one has idea how to go ahead with this .
Thanks
AbhishekHi Abhishek,
As far as what we can experience, there is not standalone download for
BizTalk 2013 Adapters for Host Systems 2013. Its part of the
Host Integration Server 2013 installtion.
HIS 2013 installation
document’s official
“Existing Product Upgrade
This release supports an in-place upgrade of earlier versions of HIS. The Host Integration Server 2013 setup automatically
upgrades your existing configuration. The following releases are supported for automatic upgrade.
Host Integration Server 2009
BizTalk Adapters for Host Systems 2.0
When you run the installation setup for
Host Integration Server 2013, we will get the information like the following. In my server I already have
BizTalk Adapters for Host Systems 2.0 (as per the requirement),
hence this installation wizard tries to upgrade it to make it compactable with 2013.
When you proceed with the installation, this will install/upgrade the BizTalk adapter to 2013.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
What are the supported secure protocols between BizTalk 2013 R2 and Iguana HL7 interface
We are working on project where we want to transmit HL7 messages securely from BizTalk 2013 R2 to Iguana HL7 interface and receive Acks/Nacks. We came to know that MLLP adapter doesn't support SSL and the other option we are thinking
is HTTPS. Are there any better options available other than these 2 options which are supported by both BizTalk and iguana.
Also I read the following article
http://help.interfaceware.com/kb/164Have you gone through above post .It clearly state
ACK’s are published when the Messaging Engine successfully transmits a message over the ‘wire’ and the system context property “AckRequired” is written on the message that was sent and it is set to true.
Both ACK’s and NACK’s have the following system context properties promoted which can therefore be used in filter expressions for routing:
AckType:
set to ACK or NACK
AckID:
set to the message ID of the message that this ACK/NACK is for
AckOwnerID:
set to the instance ID that this ACK/NACK is for
CorrelationToken:
flowed from the message to the ACK/NACK
I would again suggest to go through below link to design your solution
http://blogs.msdn.com/b/kevinsmi/archive/2004/07/03/172574.aspx
Thanks
Abhishek -
I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help
Tina,
I would go crazy if this was me. You may find this interesting from the customer agreement (to see full agreement go here:Customer Agreement | Verizon Wireless):
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
This may help you also: Arbitration and Mediation FAQs | Verizon Wireless
You can dispute any charges by doing an Arbitration or Mediation. I have never done it, so I can not help much there but this all may get you started.
Let me know if any of this works! Good Luck! Please keep me updated. I really hope they help you. -
Things posted to my calendar from July 2013 and past are missing. Where can I find them?
Go to Settings > Mail, Contacts Calendars > Sync Events > All Events
-
Element is not declared error both in BizTalk 2013 and AX 2012 R2
Hi:
We continue getting “element is not declared” in BizTalk and AX.
Appreciate any help and hints.
Regards, Toraj
Background:
We have BizTalk 2013 and AX2012 R2.
From BizTalk Suspended Job
System.ServiceModel.FaultException: <s:Envelope xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:a="http://www.w3.org/2005/08/addressing"><s:Header><a:Action
s:mustUnderstand="1">http://schemas.microsoft.com/dynamics/2008/01/services/PurchaseInvoiceService/createAifFaultFault</a:Action><a:RelatesTo>urn:uuid:ddd18935-18a7-415d-bbbf-38e4b9a08bf7</a:RelatesTo><a:To s:mustUnderstand="1">http://www.w3.org/2005/08/addressing/anonymous</a:To></s:Header><s:Body><s:Fault><s:Code><s:Value>s:Sender</s:Value></s:Code><s:Reason>
<s:Text xml:lang="en-US">Invalid document schema. The following error was returned:
The 'http://schemas.microsoft.com/dynamics/2008/01/documents/PurchaseInvoice:LedgerJournalTable' element is not declared.</s:Text>
</s:Reason><s:Detail><AifFault xmlns="http://schemas.microsoft.com/dynamics/2008/01/documents/Fault"
xmlns:i="http://www.w3.org/2001/XMLSchema-instance"><CustomDetailXml i:nil="true"></CustomDetailXml><FaultMessageListArray i:nil="true"></FaultMessageListArray><InfologMessageList
From AX Exception Log
The 'http://schemas.microsoft.com/dynamics/2008/01/documents/PurchaseInvoice:LedgerJournalTable' element is not declared.
The BizTalk WCF-NetTcp > Configuration > Action as follows. Which matches the published WSDL
<BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="create" Action="http://schemas.microsoft.com/dynamics/2008/01/services/PurchaseInvoiceService/create" />
</BtsActionMapping>
The following is the XML from BizTalk to AX. I deleted some of the data to shorten the xml.
<ns1:PurchaseInvoice xmlns:ns1="http://schemas.microsoft.com/dynamics/2008/01/documents/PurchaseInvoice" xmlns:ns0="http://schemas.microsoft.com/dynamics/2008/01/sharedtypes">
<ns1:LedgerJournalTable action="create">
<ns1:_DocumentHash>45f5770e-0ee5-496c-a290-176a16e78b7c</ns1:_DocumentHash>
<ns1:Approver>0</ns1:Approver>
<ns1:BankAccountId>0</ns1:BankAccountId>
<ns1:BankRemittanceType>None</ns1:BankRemittanceType>
<ns1:CurrencyCode>USD</ns1:CurrencyCode>
<ns1:CurrentOperationsTax>Current</ns1:CurrentOperationsTax>
<ns1:CustVendNegInstProtestProcess>OpenPaym</ns1:CustVendNegInstProtestProcess>
<ns1:DefaultDimension>
<ns0:Values><ns0:Value>
<ns0:Name></ns0:Name>
<ns0:Value>0</ns0:Value>
</ns0:Value></ns0:Values>
</ns1:DefaultDimension>
<ns1:DetailSummaryPosting>Detail</ns1:DetailSummaryPosting>
<ns1:DocumentNum>P049368</ns1:DocumentNum>
<ns1:EndBalance>0.00</ns1:EndBalance>
<ns1:ExchRate>0.00</ns1:ExchRate>
<ns1:ExchrateSecondary>0.00</ns1:ExchrateSecondary>
<ns1:FixedExchRate>Yes</ns1:FixedExchRate>
<ns1:FixedOffsetAccount>Yes</ns1:FixedOffsetAccount>
<ns1:GroupBlockId>
</ns1:GroupBlockId>
<ns1:InUseBy></ns1:InUseBy>
<ns1:JournalBalance>1573.91</ns1:JournalBalance>
<ns1:JournalName>APINV</ns1:JournalName><ns1:JournalTotalDebit>1573.91</ns1:JournalTotalDebit>
<ns1:LedgerJournalTrans>
<ns1:CurrencyCode>... LedgerJournalTrans Deleted for Simplicitsy </ns1:CurrencyCode>
</ns1:LedgerJournalTrans>
<ns1:DocuRefTable />
<ns1:LedgerJournalTable_W />
</ns1:LedgerJournalTable>
</ns1:PurchaseInvoice>
Toraj [email protected]Hi:
After working on this off and on for a few weeks,
I just posted the following Technical Blog / article for solution. Happy reading.
BizTalk 2013 and AX2012 R2 Receive Services Interface -
http://torajkhavari.blogspot.com/2015/01/title-biztalk2013-and-ax2012-r2-receive.html
Regards,Toraj
Toraj [email protected] -
BizTalk 2010 and BizTalk 2013 R2 on a single TFS 2010 build machine
Hello,
We are running two BizTalk environments ( BizTalk 2010 and BizTalk 2013 R2). All our BizTalk 2010 applications are using a single build machone on TFS 2010. We are planning to use the same build server for BizTalk 2013
R2 as well. As a prerequisite, we need to install the below two components,
1. .NET Framework 4.5
2. Microsoft BizTalk Server 2013 - Project Build Component (under Additional Software)
Will the single build server support BizTalk 2010 project build component and BizTalk 2013 R2 project build component. We don't want to have any conflict on the build server. Thanks in advance.Thanks for the answer. As its a dedicated build server, we are planning to install only the Project Build Components ( one is for BizTalk 2010 and another one is for BizTalk 2013 R2). We are not planning to install any of the other BizTalk server
components on the build server. Is that true that we can't even install multiple versions of project build components? Thanks in advance. -
Developing for BizTalk 2009 and BizTalk 2013 on the same box
I currently have Visual Studio 2008 installed and setup on my local machine for doing BizTalk 2009 development. We are migrating to BTS 2013 soon.
I also have Visual Studio 2013 installed (but no BizTalk 2013 components installed). Will I be able to develop for both versions of BizTalk on the same box?
Has anyone successfully done this?
My machine is Windows 7 Professional, 64 bit. And I have also installed BTS 2009, Developer edition as well.Hi Chris,
I don't think BTS 2009 and BTS 2013 (or for that matter any two versions of BizTalk) can be installed on the same OS. MS SQL Server and Visual Studio cannot
distinguish which instance is started. Use Microsoft Virtual Server instead.
Rachit
Please mark as answer or vote as helpful if my reply does -
Biztalk 2013 R2 ESB toolkit support and Licence issues
Hi,
Currently we are using Biztalk 2013 R2 standard version and have not installed/configured ESB toolkit yet. Now i am exploring the options to use the ESB toolkit as it is pretty good for the exception management and it comes with nice portal as well.I have
used the ESB in the past with Biztalk 2010 so i have a favor for the toolkit.
But one of our consultant said that the ESB toolkit is not supported by Microsoft for the standard version and it is supported only with enterprise version of Biztalk. He also mentioned that once we configure ESB with standard version Microsoft does not
support ESB and also the entire Biztalk server So i am afraid of that and thought of validating the information with right people.
Can someone please answer the below questions for me?
Can we use ESB toolkit with Biztalk standard version? If so how about support from Microsoft? Does Microsoft support at least production server OR not?
Do we need enterprise version only for this?
I used ESB with Biztalk 2010 in the past and though there are minor issues i personally like it . But what are your thoughts of using ESB?
Here are the technologies we are using
Biztalk 2013 R2, Visual studio 2013 and SQL server 2014. Just to mention Visual studio is not available in test and production servers.
Thanks
JBHi,
Why you want to use BizTalk Standard Edition in Production Environment?
BTS Standard only run on a single BizTalk server with a maximum of two CPUs, maximum of five "BizTalk Applications",
However, Enterprise does not have such limitations
Yes, it is not supported and it has not been extensively tested by Microsoft on Standard Edition, but it doesn't mean you can’t
install it.
From BizTalk
Server: ESB Survival Guide has this requirement:
BizTalk Server 2010 Enterprise/Developer Edition
Understanding is:
ESB toolklit uses one of the five applications that can be deployed on BizTalk 2010 Standard Edition
ESB toolkit will work on BizTalk 2010 Standard Edition, but it's not supported
Requirements for ESB 2.2 with BizTalk 2013 is not specified as such, but I suspect the same limitation applies.
Refer: BizTalk
ESB Toolkit 2.1 on BizTalk Standard Edition environment , does it work ?
Rachit
Please mark as answer or vote as helpful if my reply does
Maybe you are looking for
-
Now I've really done it. I need help with iPhoto as I can't get into it at all.
I sent a request earlier regarding my MacBook Pro. I was trying to set up both computers so that I could network, mainly wanted to send my photos from the iMac (running OS X 10.6.8 and iPhoto '08). After some trials I got the two computers so that
-
CS6 Camera Raw 7.4 "will not open" compatible D800 NEF Raw files (Win7)
CS6 camera raw 7.4 "will not open" the compatible D800 NEF Raw files (Win7). D300 NEF files open OK. I seem to remember seeing an article that stated i would have to uninstall and re-install CS6 Photoshop completely and re-install again. However I ca
-
Just installed itunes upgrade.Now it does not do anything at all...
Had the old itunes working happily. Installed the new itunes upgrade thing, and the Quicktime upgrade that comes with it. The same itunes icon is on my computer, but does absolutley nothing when I click on it... no error code, no response, nada, zip,
-
I am attempting to back up my photos so that I can remove the photos from the computer to regain the considerable HD space. I have backup them up to a Lacie external HD and would like to additionally backup to DVDs. I used SuperDuper to backup to the
-
I was just upgraded to a Windows 7 (64 bit) laptop. I am trying to get a web-based application (XMLmind) to open in FireFox and am unable to do so. Is there a specific plug-in that I need to make FF compatible with my 64 bit laptop? Firefox works, bu