Black catridge problem

mty printer is hp deskjet 3050a model no -j611b. i have to solve the issue is that 'black catridge problem'.

This cartridge document may help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02244928&tmp_task=solveCategory&cc=us&dlc=en&lc...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Similar Messages

Facing Black catridge problem within 2 months of purchase HP laserjet p1108 by printing 300 pages.

Hullo sir,
I'm Facing Black catridge problem within 2 months of purchase HP laserjet p1108 by printing 300 pages.The printer window shows you have to print pages < 50.what cani do?

Hi @thangaraj,
I see by your post that you have only printed 300 pages and it is now it is showing you have less the 50 pages left.
I would like to help you resolve this issue.
Is this the original toner that shipped with the printer?
You should get approximately 1500 pages according to the specifications for what ships in the box.
The page count is based on page yield. Depending on what you were printing.
Still I believe you should have gotten more then 350 pages, unless you were printing full page pictures in black and white.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Black Catridge Printing Slightly

I'm using deskjet 1510 series for about a year, but recently there's a problem on the black catridge. When I set the quality on plain paper from normal to best quality, the output paper always prints the words slightly. I try to use special paper but it's still the same. Then I try using photo paper with best quality and the result prints the words clearly. This thing happened after I refill the black catridge by myself, not buying the original hp catridge. Is it possible to make it clear again with plain paper best quality setting? Since it's too extravagant if I always use the photo paper best quality setting or maybe there're some indications of failure from the printer pin? I hope I explain it cleary, look forward for the solution, thankyou.
Regards,
Syafira

The black cartridge is not used when photo paper is selected, since the pigmented black ink is not compatible with photo paper.
It would appear you have incompatible ink or have introduced air into the black cartrdige.
Replacing the black cartridge with a genuine HP cartridge should resolve the issue. [Unless the refill ink has contaminated the service station caps and wipers, in that case more work may be required....]
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to How to install ATI Radeon HD2600 driver on bootcamp 3.0 windows 7 partition w/black screen problem

Ok....so i've posted this question in a different way, and i gotten several "scratch the surface" answers from people just saying to install "Ati catalyst", or insert the os x dvd and run set up.exe, and update to boot camp 3.1 or 3.2...while these all seem like great suggestions, I am finding myself needing more specific direction or "hand holding" so to speak.....here is the MAIN problem...
The Background/history
I used boot camp (3.0, and i found updates for 3.1 for imac and for windows, but can't find for mac pro, AND they all are ".exe" files which run on windows..which as you'll see is the big part of my problem...So I recently updated my mac pro (with the ATI Radeon HD2600 graphic PCIe card with 10.6.7 from 10.5.8. I created a single partitioned drive to install windows 7 professional 64 bit. The download software function didn't work (Thanks, APPLE for that poor level of support) so have to select the option that i have already downloaded, or have other media with the drivers already on it....i restarted with the windows 7 disk in....
The installation of Windows 7 Pro 64-bit
So the installation of windows 7 seemed to go flawlessly, was able to use my existing 23" hd apple cinema display (so somehow it has drivers that work with the graphics card, or maybe the motherboard's on board video components) and i select english, and install now, custom, blah, blah, blah...installation causes a few reboots, then restarts ultimately back in os x since that is the default boot os i use on this desk top and have to do the "opt" button to select booting in windows....so when i try restarting in windows, now using the actual boot drive on which i am installing it, it ran through another reboot or two, but then after that, my display goes black.... in the communities, the solution sounds super simple... "go download the ATI catalyst for the black screen problem....windows 7 doesn't have device drivers that work with the ATI radeon hd2600...no problem, just go download and install...."
The problem, re-emphasized : I cannot even finish the install for windows, because of this driver problem....i cannot see anything....I have tried to reboot in safe mode, and that then seems to invoke whatever basic drivers that do work, likely through the motherboards onboard video vs the actual graphic card, and the screen works and says that it's wanting to complete the installation, so i'm thinking awesome this is gonna work....and then.. "windows installation was not completed and cannot be completed in SAFE MODE, need to restart, blah, blah, blah" pops up...and forces reboot...so Safe Mode allows me to see, but won't allow me to finish the install of windows 7...and without completing the install i can't run (ranther I DONT KNOW HOW TO) any of the various .exe files everyone is telling me are the solutions to my problem...like update 3.1 and 3.2 bootcamp...they're all .exe files? not sure why, because bootcamp runs in 10.6.7 i thought, but whatever...it needs running Windows to execute...then the ATI radeon hd2600 driver for windows 7 that i downloaded from the site has an installation program that is an .exe file, which needs windows to run... Does this make sense, why i can't just use these fixes, that seem to be the only fixes out there....so can someone school me step by step here (not just the highlights) of how to update bootcamp, and how to install the ati radeon driver without having been able to complete the windows 7 installation because the monitor goes and stays black????
This is so very frustrating for the record...and any substantial help "not just go download this..." would be immensely appreciated.
Some other things i've been told to try that i've tried and nothing seems to happen as i'm told it will....
---I've been told to install the osx dvd and run "setup.exe" - AGAIN...it's an exe file...and 2 - when i put in the os x file it just wants to re install 10.6...so need more help if this is even a real solution to understand how to make it work...
---I've been told to update boot camp to 3.1 and/or 3.2 from 3.0, using Apple Software Update....Well, my software update is saying everything is up to date and there is nothing new to download at all, and when i reverify the bootcamp version it is still only 3.0.2...and again downloading the updates from www.apple.com/support/ for 3.1 and 3.2...all of those are .exe files...need windows to run them...again, refer to the problem described in detail above...
---I've been referred to the black screen on imac early 2011 thread saying it should fix my problem...and reading it it SEEMED like the most promising resolution...it involves creating a boot flash drive for windows 7 and an xml file that sets the imac drivers to auto install during the windows installation..and it got me farther than anything else..but still ultimately ended up in the darned black screen...my assumption is that it's because it's for imac and not mac pro so not ati-radeon specific drivers....ok....that's enough..please...anyone who thinks they can help...your help is desperately needed...thanks so much in advance!

hey Hatter, thanks so much for getting back...so just to be super clear...is there no way to install the drivers using an exe file given my current state? no way to do it with command prompt or something? if can make work with existing card, i'd prefer it...now when you say it's 'toast' how do you mean? it works well with the os x partitions and always has...so i'm not sure i follow, just want to be clear...
Now to your point of starting with only the one drive installed...so i would put that bootcamp drive in bay 1 and disconnect the rest...i'm not totally sure what you're suggesting the effect should be of doing this? just that i'm just installing windows without the bootcamp deal...but if windows 7 doesn't support the ati radeon hd2600, it still will go black screen no? or you're saying it will run video through the motherboard if it's the only bootdrive, and will run all the way through the windows install without trying to switch over to the hd2600? (slrry flr these questions..just really want to make sure i understand what you're telling me..thanks so much for your patience and help by the way...it's very greatly appreciated...your support is priceless!
So now, assuming none of the above is possible...referring now to the ati 5770 that you referred to...you mention it works with 10.6 well, and that windows 7 supports it ...2 questions on that
1) Windows 7 supports" meaning, out of the box windows 7 supports it? or will i have to install drivers still through some update, because again, if that's how i have to do it, then won't work, cuz can't start windows to see anything to install any drivers or run any thing at all...so it would have to just work with initial installation.
2)hardware wise for my Mac Pro 3,1...intel dual quad core xeon, blah blah....will this card work? it's a PCIe and should fit on my board no prob, etc?

HP Officejet Pro 8610 Catridge Problem

Bought a new HP Officejet Pro 8610 Printer. Setup Catridge shows continously "Catridge Problem" and later printed a test page and 2 other sheets while we were asleep. I decided, as a result of this accidental and unexpected printout, to buy a new catridhge set. New complete catridges were sent to me from the manufacturer itself, HP. I have correctly installed the catridges, and have repeated same step as instructed several times over. But annoyingly, this "Catridge Problem" will not go away. What should I do next. I had previously returned it to Currys and they said because I needed new set of ink hence the problem. Should I return it again or is their solution other than the one in their instruction book which is repeatedly failing....

Hi @Rose-Joe
I am sorry to hear about the troubles you are having with your Officejet 8610. The following document address cartridge errors, although the specific error you are seeing may not be mentioned, the document will guide you through the necessary steps to troubleshoot the issue; A 'Cartridge Missing' or 'Incompatible Ink Cartridges' Error Message.
If the issue persists, I recommend calling HP and letting the know the issue as well as the steps you have already completed. It may be helpful to even let them know you completed all of the steps in HP document #c04090902.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
To find the “Warranty Ends” date on your cartridges, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Lumia 920 - Black update problems, slow app respon...

I have had a lumia for well over a year in the UK, I updated to the black update a week ago, and the phone became completely unresponsive, similar to theDej's problem here: http://discussions.nokia.com/t5/Nokia-Lumia/Phone-inoperative-after-lumia-black-update/m-p/2372351/h...
However, I contacted the carrier (EE) and they replaced the handset. I set up the replacement handset, which then prompted for the update, and I took the plunge and applied it again.
Now, although the handset mostly works, some apps have stopped functioning, and most importantly the WiFi settings and Bluetooth settings pages often become completely unresponsive, drop their connections, and dont show any available connections, so I cant reconnect to WiFi or bluetooth without restarting the phone. Also on some occasions, turning off the phone shows the "goodbye" screen, but either doesn't turn off and returns to the home screen or it magically restarts without me pressing the power button.
Has anyone come across any issues like this, is there anything I can do?

Please, try the Nokia Software Recovery Tool and report your results. We have a lot of Bluetooth/Wi-Fi issues reports since Lumia Black – no problem here. However, we have so many, sounds like several different issues.

MSI 290X LE Lightning Edition black screen problem

I recently bought the above graphics card, only to run into problems with black screen, furmark blackscreens when it reaches just over 70c & games that push the card ie Crysis 3 also causes black screen problems, I'm also sometimes getting desktop corruptions, usually after it black screened.
My PSU is a 850watt EVGA SuperNova G2 so i know it's not that what causing the problem.
rest of my setup as follows
3770K @4.2Ghz
MSI Z77 Mpower
8GB corsair memory
ect ect.
Any idea's as to the cause of the problem?
edit here what it doing I've uploaded it to youtube.

First of all remove any oc. Then list specs more detailed: >>Posting Guide<<

I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black.

I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black. What should I do about it?

without more information, I assume you mean a blackout from sleep issue.
Go to system preferences > energy settings > raise the "turn display off" setting up to as needed, say 5 mins. or 10 mins.
AND ...
unchecked the "Put hard disks to sleep when possible" in both the battery and power adapter tabs.
test it and check back

Fifa 12 airplay via appletv, black screen problem

FIFA12 Appletv airplay black screen problem.
Hello, i wanted to play fifa 12 iOS with tv via airplay. But it dint work, i see game picture for half second then tv goes black screen. Audio still working and game i can go to play, but i cant see the game picture. This is very sad because every other game works with tv via airplay. The only game which would be really great with airplay doesnt work :( We tested it with two different tv and two different iPad 3's. And the tv is 40" the other one was much smaller and apple tv is the newest one with newest software.
Has someone else had this problem? is the apple tv problem or maybe fifa 12 have bug or something? i hope we can get this working, iv seen fifa 12 via airplay working very nice in few youtube videos so why it doesnt work for us.
also where would be best place to contact fifa12 makers for this problem.
Sorry for my bad english, it's not my national language.

EA sent me the following anwser:
Please try any the following that you have not tried as of yet:
- Exit the game, then turn off and reset your device. Then try starting the game again.
- Ensure you are running the most current version of the game (check to see if there is an update available for the game through iTunes).
- Access the iTunes Store within your device and download the game again. It may prompt you to 'Buy' the game, but once you click it, it should allow you to download for free since you already paid for it through iTunes. Please note that we at EA have no access to your iTunes account. If you have any disputes, please contact iTunes (Apple) directly.
- Make sure your device has the latest software:
1. Download the latest version of iTunes from http://www.apple.com/itunes
Note: If you already have iTunes installed, open it and select Help > Check for Updates. Then install any available updates.
2. Connect your device to your computer with the USB cable, select your device in iTunes, and click the 'Update' button or 'Check for Update' button. Install the software update if available.

Black cartridge problem 3515

my printer HP ink advantage 3515
showing the problem
"BLACK CARTRIDGE PROBLEM"
please solve my problem.
thank you

Greetings @mdmuzzamil , welcome to the community
Below is the guide you will need to use when troubleshooting the issue you are facing with the "black cartridge problem" error message.
I hope this helps!
A 'Cartridge Problem,' 'Ink Cartridge Failure,' 'Incompatible Ink Cartridges,' or 'Cartridge Missing...
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Not happy with Mac book pro retina because of black screen problem.

I am not happy with Mac book pro retina because of black screen problem. This screen failure appears after one year. I was fan of APPLE now I do no support any apple products. When they expires I will renew them with the other products belong to the other companies.

You are entitled to 90 day telephone support from Apple. Try contacting them.
Apple Support Contact
Apple Support contact - Telephone

Aperture 2 black viewer problem

Are there still other users out there having the black viewer problem??
I'll first describe my problem as follows:
On one image when making the basic exposure, brightness and saturation adjustments there were no problems with the viewer. Also when adjusting with highlights and shadows again no problem. But as soon as I started making adjustments in Levels using luminance the viewer went completely black. If I unchecked the box in Levels the picture would come back, but as soon as it was checked again the dreaded black viewer. The adjustments were done in the browser/viewer mode. Too my surprise when I switched to full screen mode the full viewed image with the the adjustments was perfectly fine. But when going back to the browser/viewer the viewer was black again. One more curious note is that after leaving this image for about a half an hour and coming back to it there was no black viewer to be found. Usually I would quit Aperture to get rid of the black viewer, but in this case I did not have to.
By the way I have an ATI Radeon X800 XT graphics card in my dual 2.0 Power Mac G5 and 4.5 Gigs Ram

I very rarely have this problem on my old Powerbook 1.33 GHz 17". Since 2.1 I haven't encountered it. However, the simplest way to overcome it is to go into Full Screen (press F), do 1 simple adjustment (such as increase brightness by .1), go back to Window View (press F again), undo the adjustment (decrease brightness by .1) - et voilà. Takes around 20 secs on my Mac.
For me, it's annoying but no deal-breaker.
Cheers,
k.

What is the technical 'cause' of the infamous iMac black screen problem?

Can anybody shed some light on what technical malfunction exactly causes the infamous iMac black screen problem? The common solution seems to be a logic board replacement. But what exactly is broken on the logic board? Is it the Geforce chip? Some kind of external driver circuitry? Or something completely different?

I was referring to the many problems also described in this thread (and also in many other places):
http://discussions.apple.com/thread.jspa?threadID=196774&tstart=0
In specific I am referring to machines where all of this applies:
- internal monitor stays black after power-on
- computer boots normally
- external display works normally
- internal display backlight works and can be adjusted in brightness, but all pixels are black
- PRAM reset doesn't help
- NVRAM reset doesn't help
- PMU reset doesn't help
- reinstalling OS / booting from CD doesn't help
- machines with this problem sent to repair come back with a replaced logic board
I'm looking for more information on the technical cause of the exact problem as stated above. So I can attempt to repair my iMac

Yet another 'black-photo' problem: many things tried

I have an event from march 2003 that I discovered has a 'black screen' problem. The event shows 8 thumbnail pictures; when I double-click 5 of the 8 I get a black screen, with 3 I see the picture. These 3 are rotated.
When I click the thumbnail with control down on a rotated picture and ask for 'show file', Finder finds a 1,6 MB .jpg file in the relevant event-folder in the 'modified' folder in the iPhoto Library. If I ask to 'show original file', Finder shows me my top folder (with Macintosh HD and Network). Similarly, 'show file' finds nothing for the non-rotated pictures.
When I search for the file name, neither Finder nor Spotlight finds the original file for the rotated pics, but do find the version in the 'modified' folder. Both find the files in 'originals' for the non-rotated pictures.
And I can direct Finder to the folder in 'originals' that contains the 8 original pictures. They are OK - Preview will open them, and when their folder is copied to the Desktop, iPhoto will import them and show them - dates are correct etc. (in that sense all is well, but of course the old thumbnails put in albums will still not point correctly).
I have rebuilt the library (hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions) checking all options.
I have chucked the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches,
and I have trashed the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder (dug it out again when it did not cure the problem). Nothing helped. I asked Disk Util to repair permissions.
Problem persists.
I don't know if other pics in my library have been similarly abandoned by iPhoto.
I am wondering whether there is some way of pointing iPhoto to the folder with the original pictures which will reestablish the connection? The iPhoto Library is gray when I try 'import' and cannot be opened; makes sense - but maybe there is some other way? It seems really silly - the photos are there, in the right place - iPhoto can see the folders right next to this - yet it doesn't 'see' it.
Any suggestions?
-bmw

I foresee that the fixed database will get corrupt again. Everything you tell me, and I see here, tells me it will happen again.
I have said no such thing. This db is corrupt. There is no reason why the next one will also get corrupt. None whatever. I have run iPhoto since v and never and any corruption at all.
The *best protection against a recurrence is a good back plan*
I tend to run out of space.
Well this might explain the origin of the corruption. OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on. Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially. Your first priority is to make more space on that HD. Nothing else can be done until you do. Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
True, running a Referenced Library may not mean quite as much disk space as rebuilding a Managed one.
However. you need to think about this a but more before making your decision on that basis:
*Some things to consider:*
1. Importing and deleting pics are more complex procedures. You have to to put the files where they will be stored before importing them. When you delete them you'll need to remove the files from the HD yourself.
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
4. Because iPhoto has no tools for managing Referenced Files, if, for some reason, the path to the photos changes then you could find yourself resolving aliases for +each photo in the Library+ one by one.
Regards
TD
My own opinion:
I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
Regards
TD

Switching webcam player video format black square problem

switching webcam player video format black square problem:
After the webcam player is stopped and the format changed and player is started using a new format there is a black square that appears over the screen area that partially covers up the webcam session.
Why is this happening?

Just incase anyone else runs into this problem, I was able to solve it by calling setVisible(false) on the current visual component.

Black catridge problem

Similar Messages

Maybe you are looking for