Blank entry in adhoc query

Hi All,
Im have created a data source with table joins T001W and T134M.
Filed MANDT has been maintained when the join condition has been established at Data source level.
Adhoc query in business rule identifies the deficiency. But some filed in the result has blank entry.
Attached the screen shot for your reference.
Can you please let me know, how to fix the blank entry issue.
Thanks
Ashok S

Hello Ashok,
In this case, you have foundation and plug-in in both systems. I assume you have set data source and business rules in GRC system, am I right?
If this is the case, you might have several problems as before SP 10 for GRC 10.0, backwards compatibility was not implemented yet. It means that you must follow SAP note 1352498 in order to synchronize your systems.
If this is not the case, have you checked these values in SCU3 in ECC system?
Best Regards,
Fernando

Similar Messages

  • Entry date not proper in adhoc query

    Hi,
    Entry date field in action infotype ( in the adhoc query) always returns 00.00.0000. Whereas the standard reports brings the entry date properly (This is from prelq.hiredate). How we can bring the values into this particular field.The feature 'ENTRY' returns DATYP but data is not maintained in IT41. System should bring the hiring action date (0000 start date) as the entry date. We want to use this entry date field in the adhoc query.
    Thanks in advance.
    Sreeja

    Hi Sreeja
    Please  read the following paragraph of the consulting note 508026 :
    "Exception:
    If the query is started with a key date selection, the query calls
    function module HR_LEAVING_DATE with the key date and not with the start
    and end date of the personnel action in which the key date exists. You
    can use modification note 562031 to change this system response."
    Please also make sure, that the corrections of note 561514 are contained in your system.
    I hope that this information be useful for you.
    Regards,
    Jun

  • Problem in adhoc query

    Hi All,
    This is regarding a problem in the adhoc query.
    For one adhoc query in the selection field only personnel number is there. The adhoc query selects from 0022-infotype.In this case if the reporting period is ALL, all infotype records belonging to 0022 infotype are selected. Even if the end date of the infotype record is less than the initial date of Org.assignment.
    For the second adhoc query in the selction field only
    personnel area is there. In this case the adhoc query doesnot select infotype record belonging to 0022 infotype
    if the end date of the infotype record is less than the Org.assignment.
    Can anyone explain me this strange behaviour.
    Points will be rewarded.
    Regards,
    Aravind

    Some more additional info about the problem.
    Suppose in the selection screen there are 4 fields
    Company code, Personnel area, Personnel sub area and Personnel number.
    If you fill both Personnel subarea and personnel number,
    data record belonging to education infotype but whose end date is greater than the start date of Org.assignment
    infotype is not selected.
    But if you fill only personnel number the same data record belonging to education infotype is shown with blank values for Org.assignment.
    I tried debugging and found out that in the first case
    since there is no Org. assignment record for the time period of the education infotype nothing is shown.
    In the second case, it is allowed to be shown with blank values for Org.assignment.
    Any explanation for this behaviour?

  • Problem with Adhoc Query

    Hi
    I am trying to take out a report on employee's education through Adhoc query. When I am taking the report for all employees it is coming out perfectly. But when I am giving some selection conditions it is showing me blank fields.
    Suppose I want see educational details for only one employee having personnel number 1415.
    In the selection field of personnel number I am giving 1415 but all the fields related to education is coming blank.
    Samriddhi

    Please check the conditions you are giving in the selection screen is not matching with the data available
    For example Start Date
                       Employee Group
                       etc.
    make sure you are giving the proper values
    Best Regards

  • Adhoc Query report not working fine

    Hi,
    We have a customized infotype  9222 which stores the previous experience of the employees.
    Now I have created a adhoc query in which I have added this infotype.The problem which I am facing is when I put the Indian company codes and run the report, the report is working fine . But when I put a Ukraine Company Code and then run the report ; the report does not picks the experience details of the employees and it shows Zero Yrs and Zero months.
    I have checked in PA30 the experience details are maintained  for the Ukraine employees.
    Is their any setting in the system which allows the infotype for a particular company? or what may be the reason for the strange behaviour of the report towards a specific compant code. Please reply asap

    Hi ,
    Pls check do you have authorization or not for to create Object Directory entry.
    Thanks and Regards,
    Revathi.

  • Adhoc Query Join Problem

    Hi All,
    I have created a query on PNP logical database which looks very simple, Lets say it has pernr, first name, last name, and Mailing ZIP on the output. P0006-SUBTY = 'MAIL'
    Now, the problem is .... if someone do not have mailing address subtype populated then that pernr's record is not appearing on the output. ZIP should be blank if the Mailing Address subtype is not saved for that pernr.
    I am using PNP in my infoset so I think I do not have any control over the joins, PNP should not behave like this I guess, is it normal behavior or it can be fixed? or this is one of the reasons to go for Custom ABAP Reports as it cannot be done in SQ01?
    Is the only solution through Adhoc queries to add all these PA tables in Inner Joins instead of using PNP, in SQ02?
    Thanks in advance.

    It is a common behavior of Adhoc query in PNP. You will need to create custom fields and put logic for subtypes. Using joins is not a good solution, for performance issues you cannot join many tables and HR tables have begda and endda in tables which may create problems for proper joins.

  • Adhoc query custom field selection

    Hi Experts,
    In adhoc query, we have added a custom field and we find that it is giving correct output.  However, we want to make the "selection" box appear and we don't know how to do it.  Would you have instructions?
    If we add standard/ready-made fields to a field group, both the selection and output boxes are already available but if we copy the standard to make a custom field, only the output box is available.

    Hi,
    Where do we find this customizing field we need to select? We have tried accessing sq01 and changed a query we have created. We clicked on the basic list button and checked the checkboxes for list field and selection field.  When we got to infoset query, the selection checkbox is still missing.  Are we checking the right path?  The infoset is also missing that checkbox.
    We also got a suggestion here that maybe the problem is on the "extras" tab in SQ02 - that our field should have an entry there.

  • ADHOC Query - display field OPELO IT 0045

    hi experts,,,
    really need your help on this, i really need to add field OPELO - Loan amount balance in SAP Adhoc query.
    Please help.
    Thank You

    Hi,
    Where do we find this customizing field we need to select? We have tried accessing sq01 and changed a query we have created. We clicked on the basic list button and checked the checkboxes for list field and selection field.  When we got to infoset query, the selection checkbox is still missing.  Are we checking the right path?  The infoset is also missing that checkbox.
    We also got a suggestion here that maybe the problem is on the "extras" tab in SQ02 - that our field should have an entry there.

  • Regarding  HR Adhoc  Query

    I came across a situation in the course of my job that certain people are able  to execute S_PH0_48000513 (HR Adhoc Query) without being added to the User Group. This was surprising.
    Can any of you tell me if this is because what security settings ? I am not sure if this could be some settings with auth object  S_QUERY .
    Acccording to the http://www.insightcp.com/res_15.htm it should not work if they are not added to any uset group. But in reality it is otherwise.
    Any thoughts on this , also if anyone can explain how security in Adhoc Query works , that would also be wonderful

    Hi,
    Most pobably these users are assigned with a role wherein they are assigned with the value S_PH0_48000513 under the auth object s_tcode or with the authorization object s_querry.
    Check this.
    Go to tcode S_BCE_68001397.
    In the Authorization tab enter value S_TCODE
    click ENTRY VALUES button
    In the next screen in the values field enter S_PH0_48000513
    and execute.
    It will show you which users are able to execute the said tcode
    Similarly check which users/roles are assigned with the auth object s_querry.
    In the roles assigned to the said users check if the r assigned with profile sap_all or sap_new profile.
    Or in the roles assigned to them the auth object S-Tcode containf the value S_PH0_48000513  or *  OR
    if there is an authorization  object s_querry.
    Note * means he is authorised to all tcodes.
    If the auth object s_querry exists make it inactive.
    A detailed analysis of the roles can give the way to regulate .
    If resolved dont forget to award few points.
    Regards

  • Unable to report adhoc query output on HRP tables

    Hi All,
    I am using adhoc query to report the data from HRP table (customised) but the data is not being picked even though the table has the records. The fields from the field group and the infotype fields are properly mapped but the output is blank.
    Any pointers/suggestions on how we can achieve this would be helpful.

    @ semvladigo : Thanks for the reply. Could you please let me know further info on the standard functionality.
    @ Albert : Thanks for the input. I am in PA and using PNPCE but it is not working with this LDB. 
                      When I query (in PCH) I am not getting results when I select 'ALL' in the reporting period.
                      It worked fine when infoset built in PCH LDB with reporting period other than 'ALL' (like Today, Keydate).
                      Please advise.

  • Adhoc Query on MSS Report

    Hi Experts,
    Would like to know, how to add Adhoc query on MSS reports? Tried to search the thread but couldn't find anything.
    Really appreciate kind guidance on the same.
    Thanks,
    Aashish

    Hi,
    You can remove it by following ways
    Go to SPRO
    Then follow following path
    Integration with Other mySAP.com Components -> Business Packages / Functional Packages -> Manager Self-Service (mySAP ERP) -> Reporting -> Set Up LaunchPad
    and execute
    then you can get the list of the REports
    over there you can see "Birthday List" Report and Deactivate it
    Please execute this steps before the executing the steps i have mentioned above, this will activate the reports used for MSS. Then gofor moving the unwanted reports unactive folder. Just what you have to do it select the unwanted report and move it down to the inactive folder.
    1. In the SAP HCM System choose:
    SAP Easy Access Menu
    Transaction SE38
    2. In the ABAP Editor: Initial Screen enter the Program FPB_LP_WRITE_ENTRIES and choose Execute.
    3. In the Report FPB_LP_WRITE_ENTRIES screen select the MSS Reporting and MSS with Folders options and deselect the checkbox Test Run.
    4. Choose Execute. The sample entries are entered in the Report Launchpad in the portal.
    5. Log on to the portal with User manager1 and check if the sample entries are displayed.
    6. In the ECC system leave the transaction and go back to the SAP Easy Access Menu.
    7. Enter transaction PWPC_CONV_MDT_TO_LPA in the Command field.
    8. In the Report to convert MDT table entries to LPA table entries screen, enter the MDT Scenario RPT0 and deselect the Test run checkbox.
    9. Choose Execute. The list in the next screen shows the reports which have been added to the Report Launchpad.
    Do not forget to select MSS with Folders for the FPB_LP_WRITE_ENTRIES report. Otherwise you may get short dumps while editing the report launchpad, because the reports coming from the Manageru2019s Desktop do not have folders.

  • Using of Bex Web Analyzer as Adhoc query?

    Hi,
    can we use the Bex Web analyzer as a preferred tool for designing the Adhoc query?
    Points willl be definitely assigned.

    Hi Vasu,
    You can create an appropriate ad hoc query to specify parameters for Web target iViews.
    In logical SAP R/3 Systems of Release 4.6B or higher, transaction SPO0 contains an Ad hoc Query tab. This uses the concept of InfoSets, which are usually based on table joins or logical databases, to create abstract definitions for fields that the system can read. You have to enter parameters for the individual fields. The ad hoc query delivers values that can be passed to the portal.
    Transaction SPO0 also contains a buffer for ad hoc queries. This improves system performance by avoiding the need to put together the query every time it is used.
    You can delete the contents of this buffer by choosing Delete Buffer for AdHoc Query on the start screen of transaction SPO0. This removes the index entry and the generated queries from the system.
    Hope this will help you.
    Kind regards,
    Praveen

  • Logical database in adhoc query

    Hello All,
    Can anyone tell me what is the logical database in adhoc query?

    Hi
    When you create a query , you have to select an infoset. Infoset can be considered as a source from which data is populated in the Query Fields.
    Infosets are created from Transaction SQ02.
    There can be four methods through which an Infoset can become a source of data:
    1.  Table join ( By joining two or more tables from Data dictionary)
         example: Joining tables PA0001 and PA0006 on Pernr to get a one resultant dataset
    2. Direct read of Basis Table ( Like PA0001 as a source for data in Infoset )
    3. Logical Database ( A Pre-written Program by SAP that extract data from clusters, tables taking care of authorizations and validity periods)
    Example : Logical database PNP, PNPCE (Concurrent Employement),PCH ( LDB for Personnel Development Data)
    Custom Logical DBs can be created in T_Code SE-36.
    4. Data Retrieval by a Program ( Custom code written by ABAP developers which will collect and process data) . This program has a corresponding Structure in data dictionary and the fields of this structure will be used in query)
    Reward Points, if helpful.
    Regards
    Waseem Imran

  • Issue in adhoc Query

    Dear All,
    When i am running adhoc query for a particular infotype iam getting fine.
    My issue is iam not getting the start and end date of the record.
    can any body help me out how to get the start date and end date of each record.
    Thanks in advance
    Regards
    Ananya.K

    Hi,
    If you want to add the dates to the output of the querry, While creating/editing the query, you should add feilds ENDDA and BEGDA for the infotype to get the start and end date correct.
    If this does not answer your question, could you explain your query in detail?
    Thanks,
    Dhiraj

  • Problem in Adhoc Query's set operation functionality.

    Hi Experts,
    I am facing problem executing Adhoc Query's set operation functionality.
    In Selection Tab, following operations are performed :-
    Execute a query and mark it as 'Set A'.(Say Hit list = X)
    Execute another query and mark it as 'Set B'.(Say Hit list = Y)
    In Set operation Tab, following operations are performed :-:-
    Carry out an Operations 'Set A minus Set B'.
    which results in Resulting Set = Z.
    Transfer the resulting set 'in hit list' and press the copy resulting set button.
    In Selection Tab, Hit list is populated with Z.
    And when output button is pressed, I get to see 'Y' list and not 'Z' list.
    Kindly help.
    Thanks.
    Yogesh

    Hi Experts,
    I am facing problem executing Adhoc Query's set operation functionality.
    In Selection Tab, following operations are performed :-
    Execute a query and mark it as 'Set A'.(Say Hit list = X)
    Execute another query and mark it as 'Set B'.(Say Hit list = Y)
    In Set operation Tab, following operations are performed :-:-
    Carry out an Operations 'Set A minus Set B'.
    which results in Resulting Set = Z.
    Transfer the resulting set 'in hit list' and press the copy resulting set button.
    In Selection Tab, Hit list is populated with Z.
    And when output button is pressed, I get to see 'Y' list and not 'Z' list.
    Kindly help.
    Thanks.
    Yogesh

Maybe you are looking for