ADHOC Query - display field OPELO IT 0045

hi experts,,,
really need your help on this, i really need to add field OPELO - Loan amount balance in SAP Adhoc query.
Please help.
Thank You

Hi,
Where do we find this customizing field we need to select? We have tried accessing sq01 and changed a query we have created. We clicked on the basic list button and checked the checkboxes for list field and selection field. When we got to infoset query, the selection checkbox is still missing. Are we checking the right path? The infoset is also missing that checkbox.
We also got a suggestion here that maybe the problem is on the "extras" tab in SQ02 - that our field should have an entry there.

Similar Messages

Adhoc query missing field labels

Hi,
We have a problem regarding adhoc query. The fields are not showing all characters when you hit the refresh button at the bottom. For example, i chose to output Personnel Area, upon executing the refresh button, it is showing 2 characters only instead of four (US01 and is showing US only). This happens for some fields as well. It seems the labels are being cut. But when you check the field documentation, it says 4 characters. Also, when you click on the "output" button, everything is ok. Meaning, you can see all 4 characters for Personnel Area.
The infoset we are using has been there for a long time already and there were no problems like this before, It was just now that this thing happened and were not sure what triggered this.
please let us know if you have any thoughts about this, Thanks in advance!

Hi Sanghamitra,
Yes, i am referring to the reading pane at the bottom. However, there are quite number of fields that seem to be reduced. Also, the reading pane is working ok before and it shows the exact characters that you actually want to see. It has the same results as that when you hit the output button. We're not sure how it happened or if it was impacted by any support packs. With that, we want to know how to bring it back to its original appearance before.

Adhoc query custom field selection

Hi Experts,
In adhoc query, we have added a custom field and we find that it is giving correct output. However, we want to make the "selection" box appear and we don't know how to do it. Would you have instructions?
If we add standard/ready-made fields to a field group, both the selection and output boxes are already available but if we copy the standard to make a custom field, only the output box is available.

Hi,
Where do we find this customizing field we need to select? We have tried accessing sq01 and changed a query we have created. We clicked on the basic list button and checked the checkboxes for list field and selection field. When we got to infoset query, the selection checkbox is still missing. Are we checking the right path? The infoset is also missing that checkbox.
We also got a suggestion here that maybe the problem is on the "extras" tab in SQ02 - that our field should have an entry there.

Text fields are not displayed for custom infotypes in Adhoc query

We have developed a custom infotype , which we had incldued in the adhoc query. when we generate output , it is showng codes instead of text . In the output filed , it is hwoing only vaue and Vale and text is diabled.
please let me know , how to add text in the out filed filed
thanks
rajaram B bhat

HI
But in the out put filed , when i click on the output filed , i am get three drop downs , only text , only value and valu & text.
Only value is enabled and other two ate disabled.
How to enable the othet two , i.e text only and value & text
thanks & regards
Rajaram B Bhat

Problem with a Currency field in Adhoc Query - HR

Hi,
I have an Adhoc query that uses Custom infotype fields (Z infotype and z fields).
The currncy field also has a reference field in the infotype (of type waers).
Wehen we try to get the ouput of the Adhoc Query it gives following error:
The report cannot be generated because the internal description is invalid or incomplete, or because the selection screen is too large.
Regenerate the assigned InfoSet, and read the log. If the InfoSet is OK, make sure that at least one field is given as output.
If you used the 'Refresh' icon to start the query, use the 'Output' menu option to execute the query. This gives you a full screen display of the data.
If an output was generated, the query cannot work with actual data in the construction view. In this case, always use the 'Output' function to execute the query.
I have already tried a number of solutions:
1> Regenerate the infoset...
2> make the field as an additional field and write my own code for it (the error comes before the code as i kept a breakpoint but it stopped before that)
if i add other fields of this infoset instead of this field, then those appear in the output.
Any solutions ??
thanks in advance,
Anuj

Hi,
Is the problem not clear or no one has an answer?
Please reply with some suggestions..
Regards,
Anuj.

Text (T) symbol for field kostl not found in adhoc query selection

Dear Freinds,
We have developed a custom infotype , as per our requirement one of the field i have added is the Kostl field ( this i have created exactly the same way in infotype 0001).
I have to devlop a report using ADHOC Query based on this custom infotype , so i have developed a adhoc report ( selecting the logical database PNPCE option as it is not allowing for PNP), when i selecting the required feilds from the Custom infotype i can see for the field KOSTL field doesnt have the symbol(T) against the field . However for another ADHOC report when i am selecting from the infotype 0001 i can see the T symbol for the KOSTL . So i went and check in the custom type structur and transparent table as well , the search help etc is exactly same as that of the which are there for this field in the standard infotype 0001(Kostl). Because i have to display the description of the cost centre along with the kostl field , howeve iam able to get for Pernr descirption , for pernr iam able to see the T symbol against the field Pernr.
Please could any one guide why this field doesnt have the symbol T.
regards
divya.

Why don't you the same data element of the KOSTL.
Eventhough you created your own infotype you can still use the stanadard data element.
If you use the standard datatype you will get those feature avalable
Warm Regards

Adhoc query Issue in IT0001- Additional fields.

Hi Everyone,
Im facing issue in adhoc query, In IT0001- Additional field .The supervisor name is not getting displayed in the output even though personnel number is getting fetched.Output value attributes is chosen as 'value and text'.
Details of the field:
Name of the field: Personnel number of superior (Org. Manag
Technical name :SYHR_A_P0001_AF_OMNGR_NR (Additional field)
This is happening after the implementation of A3 to A9 notes.
Thanks in Advance.
Regards,
S P Joshi.

Did you try Ted's solution of identifying the "addtional field 'SYHR_A_P0001_AF_OMNGR_NA' "as a displayed field ?
Note that if that field is not already in your Info-Set, you will have to add it (using t-code sq02).

Additional field in adhoc query

Hi all, I need to be able to report on the IT105 subtype 0001 system ID for employees who are withdrawn from the company, however, when someone leaves their IT105 record is delimited so adhoc query will not output anything. Has anyone coded an additional field that will look at the latest record regardless of the date?
If you have, please can you share the code with me!?
Many thanks!

Hi Tanya ,
Please find the code below. It is designed for additional structure z105_last which is bassed on P0105 type.
data l_it_p0105 type standard table of p0105.
clear: l_it_p0105, z105_last.
call function 'HR_READ_SUBTYPE'
exporting
    tclas                 = 'A'
    pernr                 = peras-pernr
    infty                 = '0105'
    subty                 = '0001'
    begda                 = '18000101'
    endda                 = pn-endda
tables
    infty_tab             = l_it_p0105
exceptions
    others                = 1.
if sy-subrc = 0.
describe table l_it_p0105.
read table l_it_p0105 into z105_last index sy-tfill.
endif.
Regards,
Sergey

Some fields missing in Adhoc Query

In infotype PA0006 (Addresses) we have 4 telephone nr fields in view (PA0006-TELNR, NUM01, NUM02, NUM03).
I have a requirement to make them all available in adhoc query.
In SQ02 for the HR infoset, Infoset P0006 is already available in the database window, but only includes TELNR & NUM01. Num02/3 are not available for me to drag into the field group for the users to be able to use.
The table view clearly has these fields (+05 & 06), so I don't know why they arent available in mt database view in SQ02?
Is there anyway to get them in, so I can make them available to the users, or is there a field property somewhere that excludes these from being available in SQ02?
Thanks for any advice
Graham

You can add whole table PA0006 to your infoset by navigating to "Additional fields" section > right click > create > additional table PA0006.
Then enter:
SELECT SINGLE * FROM PA0006
WHERE PERNR                = P0006-PERNR
   AND SUBTY                = P0006-SUBTY
   AND OBJPS                = P0006-OBJPS
   AND SPRPS                = P0006-SPRPS
   AND ENDDA                = P0006-ENDDA
   AND BEGDA                = P0006-BEGDA
   AND SEQNR                = P0006-SEQNR
Then you will have all fields from IT0006 in your infoset.

Adhoc query-Problem with Personnel no output field

Hi Gurus,
We are trying to run an adhoc query using a customized Info set(PNPCE logical database).
While running the query,we had selected Personnel no(from Payroll status P0003 table) as output field and Company code(from Org assignment P0001) as input field in the selection.
Problem is in the output field we are seeing the Personnel name details in place of Personnel no.Could anyone please suggest what could be the reason behind this and how to fix it.
Your help will be highly appreciated.
Warm Rgds
Sushil

Hi Sushil,
The default output for fields with a text and a value (Name = text, PERNR = value) is the text. You can change this by right clicking on the output box in Ad Hoc and selecting "Value". If you want both name and number, select "Value and Text".
You can also change this default to Value from Text if in Ad Hoc, you go to Edit --> Settings. On the last tab, change the radio buttion for output default to Value from Text. This will change it for all fields so you would see the eight digit number rather than the name of the position or org unit. Thus, you may want to keep it at Text and use the right click to change specific fields as needed.
By the way, it is usually best to utilize the personnel number field from IT0000-Actions, although it can be obtained from any infotype if you include that field in the field group when creating your infoset.
Paul

Adhoc query - length of service fields

Hi all,
I have question regarding the length of service fields in adhoc query (Actions infotype data fields PNP database).
When I select these fields I get different results according to reporting period; if i select a keydate then the service is calculated according to this date, but if I select a reporting period, then the service is calculated according to the start date of the reporting period.
Is this expected behaviour? Please let me know how this can be coded to reference the end date of the reporting period.
many thanks

Hi,
Please check OSS notes 333517 and 357093. Both notes, though from 2000, contain detailed functionality and recommendation around u201Clength of serviceu201D.
Hope this helps.
Donnie

Adhoc Query data not getting displayed on Portal

Hi,
I have a problem with custom Adhoc query data not getting displayed on the portal.
It was getting displayed initially but after a user made some changes to the query its not getting displayed.
The query is displaying data perfectly on R/3 but on portal ..Its giving the message no data found.
Can anyone help me on this.
Also if anyone can tell me how do i debug an Adhoc query from potal.
Is there any tool to debug an Abap program from portal.
I dont want to use trace,
Thanks
GT
Message was edited by: GT

Hi GT
find out the EXACT query u want to launch if it's display
in BW buisness explorer then change the iview property
for that query in portal . right click on iview
BEx Web Application Query String -> assign correct query
regards,
kaushal

How can I modify the display field names on the output port of my bi query

Hello,
I integrate my bi query in the visual composer storyboard.
Then I click on my output port of the query and see the output fields.
The display field names are very strange.
For example:
ABZCNQMDOPWJGHS1Q5Q27090
I have never save such a field name while I create my query in the query designer.
Have somebody an idea, where I can modify my displayed field names??
Thanks.
Thomas

Hi Thomas,
the cryptical names are the technical names of your query components. If there is no decription available (depends also on your portal language) then the technical names are displayed. Check your portal language in your user settings and then check if you have entered a description in the query designer for this language.
Best Regards,
Marcel

Display Field Query

Hi all,
I am new to Oracle forms, and bit stuck in middle of no where.
The question is:
When ever I press a button it displays the answer into the given display field. I have create the display field, attached the trigger with button ie when button pressed, done the half codding but at the end of the codding don't know how to display the result in display field.
The same like we use in sqlplus DBMS_OUTPUT.PUT_LINE
Thanks

Thanks your reply,
I have created a Trigger:
SQL > DECLARE
V_DATE VARCHAR2(50);
CURSOR C_DATE IS
select trunc(months_between(:DATE_DIFFER.HIGHER_DATE,:DATE_DIFFER.LOWER_DATE)/12)||' years '
||trunc((months_between(:DATE_DIFFER.HIGHER_DATE,:DATE_DIFFER.LOWER_DATE) - trunc(months_between(:DATE_DIFFER.HIGHER_DATE,:DATE_DIFFER.LOWER_DATE)/12)*12)) ||' months '
|| trunc((:DATE_DIFFER.HIGHER_DATE - add_months(:DATE_DIFFER.LOWER_DATE,months_between(:DATE_DIFFER.HIGHER_DATE,:DATE_DIFFER.LOWER_DATE))))|| ' days '
from dual;
BEGIN
OPEN C_DATE;
FETCH C_DATE INTO V_DATE;
:date_display := V_DATE;
CLOSE C_DATE;
END;
But getting an error DUAL must be declared...Its not an database its, so how I can use DUAL function..
Thanks

Adhoc query - Hit list 40, output 5

My client has an adhoc query set up and the selections make sense the hit list number is correct as compared to what is on the DB - I have checked using SE16.
However when the output is produced only 5 records are shown.
There are no auths issues according to SU53 and also I have access to all infotypes in PA & PD so I am slightly confused as to what is going on here.
Perhaps some of you have had the same experience and have an idea or clues as to what is going on here.
Many thanks in advance,
Kind regards,
Dan

Hi,
Hit lists show employee hits, output shows output hits. You have difference because in the output not every employee has a record in the infotype that you selected for output.
For example you have 40 employee and only 5 of them have record in IT 0016. So if you select IT 0016 for output only 6 records will be displayed, though according with you selection criteria 40 employee were selected.
Just add to output fields from infotype that every employee has (e.g. from IT 0001) and you will see all of them in the output.
Cheers

ADHOC Query - display field OPELO IT 0045

Similar Messages

Maybe you are looking for