Blocked to Un-restricted stock in same bin

I have a bin with 5 PCE in blocked stock (S). Now, if I want to make it un-restricted in same bin what needs to be done. Please explain.
Thanks in advance

>Tao wrote: "Try to use t-code LT01 with mvt 999 to change the block status to unrestricted in the same bin directly"
This would have the affect of moving the <B>WAREHOUSE</B> quantity from blocked to Unrestricted but leave the <B>INVENTORY</B> quantity in blocked stock - causing a difference between IM & WM inventory balances
<B>Current situation</B><br>IM:  3 S (Blocked)<br>                       WM: 3 S (Blocked)
<br><B>After LT01 (WH only movement)</B><br>   IM:  3 S (Blocked - No change)<br>   WM: 3 U (Unrestricted)
<B>This will result in error messages when the users try to issue 3 from stock using MIGO - stating that it is still in Blocked stock

Similar Messages

  • Block posting for restricted stock

    Dear all,
    Currently when perform migo for restricted stock,system only show warning message.
    How to block the system to perform any posting for restricted stock?
    Thank you

    check the message number and change the message category form warning to Error at SPRO: MM > Inventory management and physical inventory > define attributes to system messages.
    OR
    take ABAP help

  • WM::system is not placing the stock another storage bin

    hi friends
         system is not check fill the stock to another bin ..system is placing the stock in same bin...what are the cofiguration required?
    with regards
    dinesh
    Edited by: code acess on Jun 15, 2011 10:47 AM
    Edited by: code acess on Jun 15, 2011 10:48 AM

    hi SAP FC
                       Iam using putaway strategy is "L" ..storage is determing in the system ..every thing is working fine except placing  stock to another bin
    with regards
    dinesh
    Edited by: code acess on Jun 15, 2011 11:18 AM

  • Different Batch no of same material kept in same Bin

    Dear Gurus,
    my putaway strategy I and capacity check method 3
    and addition stock x and want mixed storage with  one material number with different batch no
    placed in same Bin but iam getting error "Mixed storage C only allowed in block storage managed for storage units"
    pls suggest how to proceed.
    Regards,
    suresh.

    Hi Suresh,
    How your TO screen layout appears ? at the time of creation is it single line Item.
    Please change it & see. With TO screen control "1" i.e. Putaway , option at header level comes up "Add to existing stock" and that will allow you to take Material with different batches in same BIN.
    Please post outcome of above proposed way , will try to find some workaround.
    Thanks,
    Mahesh

  • Restricted stock used in intra-company stock transfer

    Hi,
    Can anyone give me the link about the description and difference between unrestricted stock, restricted stock and blocked stock?
    And for intra-company stock transfer(in one company code), I would like to post goods issue with restriced stock. and in inter-company stock transter and third-party sales, I would not like restricted stock to be used. How can I configure in system?
    Many thanks,
    Aries

    Hi Attila,
    Thank you for your informaiton.
    For different delivery types, such as LF, NLCC, NL, the checking rule are all the same. It is very unreasonalbe
    because for NL(stock transfer under one company code), we would like restricted stock used and for LF and NLCC, we only want unrestricted stock. Due to the same checking rule for all the delivery types, changing checking rule will not meet the requirements for all the types. If there is a customizing to set checking rules for different delivery types. If there is not, how can I do modification to meet our requirement?
    Many Thanks
    Aries

  • Transfer Posting of Restricted stock Plant to Plant

    Hi,
    How to do transfer posting of restricted stock Plant to Plant
    Kunal

    HI
    One step stock transfer from one plant to another is 301 movement type.. Remember the stock should be in unrestricted use. If it is in quality and or blocked the same will not work
    2 step process is 303 and 305
    From Stock transfer order Documnt type UB with item category as U. Movement type used is 351 and 101

  • Exchange 2010 EMC and EMS errors - BLOCKED by software restriction

    EMC has this message:
    Initialization failed "Execution calling 'GetSteppablePipeline" with "1" arguement: File D:\program files\Microsoft\Exchange Server\V14\RemoteScripts\ConsoleInitialize.ps1 cannot be loaded because its execution is blocked
    by software restriction policies" 
    EMS has this error:
    "There were errors in loading the format data file: D:\Program Files\Microsoft\Exchange 2010\V14\Bin\exchange.format.ps1x
    ml, , D:\Program Files\Microsoft\Exchange 2010\V14\Bin\exchange.format.ps1xml : File skipped because of the following validation exception: File D:\Program Files\Microsoft\Exchange 2010\V14\Bin\exchange.format.ps1xml cannot be loaded because its execution is
    blocked by software restriction policies. For more information, contact your system administrator."
    All other powershell scripts work just fine.  It is not the execution policy.  That is set properly.  Authenticode returns valid on the files. There are no settings it GPO to control or cause this. Email working fine.  It just started
    after a reboot for updates.  Any other thoughts before I spend $500 for a call?
    Server2008 Standard SP2
    Update Rollup 4 v2 for Exchange Server 2010 SP2
    Thank you

    The long and short of it was Microsoft Certificates didn't update and were expired. I was not given a reason why this happened but the final solution after Microsoft spent 2 weeks on this was to first reinstall Exchange Service Pack 3, reboot. Install
    update rollup 8, and reboot.  This fixed the EMC but not the shell.  Then they reinstalled the rollup 8 again and one more reboot.  Everything now works.  I'd say with all the other little tweaks they looked at as possible suspect and "other
    things" they fixed in their efforts to solve this, I defiantly got my money's worth.  Despite not really knowing what really caused the issue in the first place

  • BAPI_MOSRVAPS_SAVEMULTI3 creating planned order from Restricted Stock

    Hi,
       We have a requirement where we need to programmatically replicate the Push Production functionality as in /SAPAPO/RRP3 transaction. We are using the BAPI - BAPI_MOSRVAPS_SAVEMULTI3 and it is working fine for conversion of planned orders and Process Orders to component planned/process orders and dependant demand for the parent material. The issue is when we are trying to convert a restricted stock to a planned order and dependant demand using the BAPI, we are getting a message "No valid source of supply could be found". Please let us know if anyone has a resolution to this issue or if any further details are required.
    Edited by: ARKAJEET DASGUPTA on Apr 1, 2011 7:28 AM

    Hi,
        Tlane is not a field name,I wanted to say Transportation Lane(T-Lane) exist or not in the system for that product-location combination.
    For the SOURCE_NAME field, it is clearly mentioned in the documentation of BAPI that,
    Selection of sources of supply (for example, PP/DS PPM)
    ORDER_END_DATE is used as standard as the selection time for the source of supply (in-house production). If ORDER_END_DATE is empty, the value from ORDER_START_DATE is used instead.
    If a different time should be used to select the source of supply, this can be set using the EXPLOSION_DATE field.
    If a date field is not specified for an order change, the date of the last explosion of this order is used for source of supply selection.
    The entries in the MASTER<...> fields also play a role for source determination. That is, possible sources of supply are searched for on the basis of product, location, quantity, and so on.
    For the selection of sources of supply, the setting from the product master for plan explosion is used.
    If several possible alternative sources of supply are found, the system chooses one source of supply as standard.
    However, if you want to select a specific source of supply that has been found, you can use the fields PLAN_NUMBER + PPM_NUMBER, PROD_VERSION, or SOURCE_NAME. Note that only one combination may be used; you cannot use both PLAN_NUMBER and PROD_VERSION at the same time because both are valid for different source of supply types.
    Please check with the functional consultant, in plan explosion field in product master what value they have maintained.
    Because BAPI will try to get the source of supply name on basis of that field which is mentioned in the documentation.
    Regards,
    Saurabh

  • Movement type to scrap the Restricted stock from warehouse

    Hi,
    Kindly advise the movement type to scrap the Restricted stock from warehouse.
    Thank you.

    hi
    what do u mean by restricted stock
    i thnk it is BLOCKED stock
    please clerify that
    u cant see any restricted stock in MMBe
    it is GR blocked stock and blocked stock or reserved stock
    hope it clears
    regards
    kunal

  • Addition to stock in storage bin

    Hi,
    in the customizing LE-WM-Master data-Define Storage Type  I have defined for storage type 500 that addition to stock is not allowed, so all the bins created in this storage type are not going to allow addition to stock even though in materials master this indicator is marked?
    MY requirement is to not allow addition to stock to the bins if some material is placed in that bin even if there is available capacity, but this is true for 99% of the bins, meaning I need for 5 bins in particular, system allow addition to stock because I want to place in there 10 different materials that are really small compared to all other materials.
    How can I achieve this?
    Regards

    Hi Jürgen
    When thinking of this setting you told me everything will work perfec if it worked, but even if I put in the customizing of storage type Addition to stock "M"  and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
    These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
    The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
    Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4), and the last storage section is linked only to one bin.
    The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
    And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
    Please your inputs will be really appreciated

  • System shud restrict stock posting of 04 inspection lot

    Dear ALL,
    Pain Area - whenevr Process order get release 03 inporcess inspection lot generates and after Process order get confrimed
    O4 inspection lot generates , Evry time we use to process 04 Inpsection lot and then stock posted from Quality to Unrestrcted and finally , urestricted stock goes to market . NOw 03 inpsection lot remains in Created status , system not restriced for 04 activity i.e stock posting . So I want to restrict stock posting of 04 inspection lot  if 03 inpsection lot doesnt have UD status .
    please suggest .
    Regards,
    Prerna Verma

    Do you want to put a hard error when UD is taken for O4 lots, if the corresponsding SF lot is not released? This will stop users releasing the 04 lots and personally I am not in favor of writing a piece of code in User exit at UD and stiop the release of a Finished Batch.
    I have worked on similar requirement where users used to check manually the SF batch - UD prior to release a Finished Lot. to reduce the manual work and data transpose errors, we have used a calculated char. SF batch released? and assigned it in the finished product inspection paln.
    We copied the standard FM - QEFC_FORMULA_CALC_EXAMPLE and written a logic to look the consumed SF batch is released or not .The Function Module is assigned to a Calculated Characteristic u2013 the user will then be able to Calculate the characteristic during Results Recording of a batch of Finished Product to determine the Release Status of the issued batch of Semi-Finished material, as opposed to having to look it up manually.  We looked at the Q-score to decide a SF batch is released , rejected or UD not taken. The Function Module used the name of the Master Inspection Characteristic (MIC) and the Material Type of the Inspection Lot to determine the Inspection Lot Q-Score to return.
    With this set up you will not issue a hard error at the time of UD for Finsihed batch at the same time users will know the SF batch status when the results were recorded for Finished batch.
    If your requirement is a Hard error, simply go for the user exit suggested and write a logic to look for the Semi Finished Batch consumed.
    Hope it helps.
    Thanks,
    Ram

  • Restricted and non-restricted stock

    Hi Experts,
    Does anyone know where i can find in the BC the KF Restricted and non-restricted stock (in R/3 MARD-SPEME and MARD-LABST)? If there is no standard for this, where do you think is the best extractor to enhance with these fields?
    Thanks in advance,
    Nuno

    Hi Nuno,
    These fields are part of the 2LIS_03_BX and 2LIS_03_BF extractors.  MARD-SPEME (Blocked Stock) should go directly into 0BLOCKEDSTOCK's in flow and out flow characteristics.  MARD-LABST can go into a custom key figure. 
    If you install the 0IC_C03 cube and the 2lis_03 extractors, then you can look at the update rules.  These rules aren't for the timid!  In the update rules or on a query, you can select stock type = K and Stock Category <> ( K or E ) for unrestricted use stock (beware this also includes vendor consignment and customer consignment).  Blocked stock is identified as Stock Type D and Stock Category <> K or R.
    Brian

  • Bringing back the rejected material into un restricted stock

    Dear Experts,
    We had a PO for 125000 qty of a material agaisnt which the GRN was done by stores
    when quality fellow inspected the inspection lot only 25000 were found ok and the same were posted into unrestricted stock through UD
    After discussion with vendor now we ara again required to bring back rest 100000 quanitiies to un restricted stocks as the same were routed through 122 movement by system automatically
    please suggest
    Thanks and regards
    Pawan kHurana

    We had a PO for 125000 qty of a material agaisnt which the GRN was done by stores
    when quality fellow inspected the inspection lot only 25000 were found ok and the same were posted into unrestricted stock through UD
    After discussion with vendor now we ara again required to bring back rest 100000 quanitiies to un restricted stocks as the same were routed through 122 movement by system automatically
    please suggest
    You can do 123 movement type.  123 is the reversal of return delivery to vendour.   In MIGO you can do this transaction.   If this is not happening you can do GR of that 100000 quantity against PR once again.
    Regards,
    KrishnamurthyDSS

  • Restricted Stock

    Is there any configuration whenever I want to use my Restricted stocks whenever my Unrestricted stocks has all been used up?
    Thank you.

    Dear Rumar,
    In IMG under
    Sales and Distribution -> Basic Functions -> Avaiability check and Transfer of Requirements -> Availability Check -> Availability check with ATP Logic or Against Planning -> Carry Out Control for Availability Check
    In this IMG step, you define checking rules for the availability check and allocate them to a checking group.                                                                               
    The checking rule specifies the scope of the availability check for the respective transactions in sales and distribution by specifying precisely which stocks, receipt and issue elements should be taken into account during the availability check.                                
    When specifying the inspection scope for a certain check rule, you can currently select the following stock elements:                        
    o   Safety stock (to be maintained in material master record, MRP data)
    o   Stock in transfer in the receiving plant                          
    o   Stock in quality inspection                                       
    o   Blocked stock                                                     
    Regards,
    Naveen.

  • Stock transfer from bin to bin

    hi,
    In stock transfer from bin to bin process i need solution for the below requirement...
    a)The system must raise a warning when a material is transferred to another bin, which already contains the same material with a different batch number.
    b)Transferring stock to a single batch location which already contains another material/batch is not allowed.
    In bin to bin stock transfer  process, it is possible by  system   to propose destination bin  automatically ?
    Thanks
    Muthuraman.D

    The requirements that you have may be fulfilled using 'mixed storage' options available in the storage type configuration. However, there are rigid prerequisities to use certain options such as usage of storage unit management and bulk storage strategy. You may look into a custom putaway strategy (MWMTO003) to fulfill your requirements. 
    As for automatic proposal of bin during bin-bin transfer, it is pretty much the same set up that you'd use for any other putaway. This includes, enabling storage type search (sections & bin type, if applicable) along with indicators, defining the relevant putaway strategy, and assignment of indicators in the material masters.

Maybe you are looking for

  • Can I download onto a usb flash drive instead of a IPod

    Can I download onto a usb flash drive instead of a ipod?

  • Triger value from outgoing payment to journal entry

    Hi all, I add an UDF in outgoing payment form ( system form)for example i call it area. In the same time i also add an udf with the same name ( area) in journal entry form ( system form). When I entry data in outgoing payment, i also entry the area f

  • Fusion Middleware 11gR1 - RCU installation - AL32UTF

    Hi, I am installing Fusion Middleware 11gR1 and at the step where I need to create the repository using RCU utility. First of all, I know it is not recommended, but, is it supported and can I create the repository in my E-Business Suite database? The

  • Tranfering video clips for Keynote in iPad

    Hello:          I have multiple video clips in Keynote in ultiple presentations (A, B, C, D, etc.). For each presentation, I have created seperate folders with video clips (e.g., A. Video Clips, B.Video Clips, etc.)          I read that I need to pas

  • Problem in Infotype 0057

    Dear Guru's In my client few employees are having more than one lic policy. I have created 3 wage types and assigned it to 0057 infotype. When i am creating two records using two different wage types on the same date or by giving some other date for