Border Manager 3.9 upgrade

Are current subscription holders of SMB6.6 eligable for the upgrade to
3.9 border manager?

Chuck,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Solution Manager 7.1 upgrade,j2ee_admin is locked

Hello ,
I am in the middle of solution manager 7.1 upgrade and running into execution phase now. but my j2ee_admin password is locked.
I want to unlock and reset the password but this is what happening .:
1. I try to login with old j2ee_admin password but it is not correct.
2. I re-check with updating same to configtool but no luck
3.I have enabled emergency SAP* ID and can login to Visual Admin so
4. when I try to access UserAdmin so that I can unlock j2ee_admin it gives me error as Application error occurred
during request processing
Is there any way to reset /Unlock j2ee_admin even though NWA/ user admin is not available.
Please help me so that I can move ahead with upgrade
Thanks,
Supriya

Hi Supriya,
Hope you are doing good.
What is the status of the upgrade; is the UME still ABAP ? If so just login to the backend ABAP server/client and unlock j2ee_admin.
Else login to visual admin and there is a security provider in the services where you can unlock the user.
Hope this helps.
Kind Regards,
Hemanth
SAP AGS

Border Manager 3.8.5 and S2S VPN

I have a couple of questions with Border Manager and S2S VPN. Everything
is up and running, we can ping both servers (Netware 6.5.6), we can ping
workstations attached to each others network, we can access programs from
each others network. Everything seems to be working great. The question I
have is this - on both servers, under Remote Manager, VPN Monitoring, both
show as 'Being Configured'. I do not think that this is an issue but there
is another error in the Audit Log. The error -
"Proposal Mismatch - Quick Mode: ESP - transform mismatch mine: esp des
his: esp 3des dst: xx.xx.xx.xx src: xx.xx.xx.xx cookies
my-his:17B2D88772DE1D61 - 4F15FFD50824F821".
This appears on both servers Audit Log.
Is this a legit error or a information error? I used Craig Johnson's 'A
Beginner's Guide To BorderManager 3.x' but ended up making both VPN's
masters as per Novell TID - 10095268.
If anyone has an insight as to what these errors are and if there is a
fix it would be greatly appreciated.
Kelly

Kelly Burnside wrote:
> I have a couple of questions with Border Manager and S2S VPN. Everything
> is up and running, we can ping both servers (Netware 6.5.6), we can ping
> workstations attached to each others network, we can access programs
> from each others network. Everything seems to be working great. The
> question I have is this - on both servers, under Remote Manager, VPN
> Monitoring, both show as 'Being Configured'.
Sometimes the imanager snapin can not get the current status of the
connection from vpinf so it shows 'Being Configured'. It can take some
times, maybe days to change the status.
I do not think that this is
> an issue but there is another error in the Audit Log. The error -
> "Proposal Mismatch - Quick Mode: ESP - transform mismatch mine: esp des
> his: esp 3des dst: xx.xx.xx.xx src: xx.xx.xx.xx cookies
> my-his:17B2D88772DE1D61 - 4F15FFD50824F821".
This is not an error, it is an information message.
> This appears on both servers Audit Log. Is this a legit error or a
> information error? I used Craig Johnson's 'A Beginner's Guide To
> BorderManager 3.x' but ended up making both VPN's masters as per Novell
> TID - 10095268. If anyone has an insight as to what these errors are
> and if there is a fix it would be greatly appreciated.
> Kelly
Everything is fine, nothing to be worry about.
gonzalo

Reporting on Border Manager

Hi
Running Border Manager Proxy Server 3.8 on Netware 6.5 sp5, is there a way
to draw reports on internet access for users?

In article <akoIi.855$[email protected]>, Janine wrote:
> Running Border Manager Proxy Server 3.8 on Netware 6.5 sp5, is there a way
> to draw reports on internet access for users?
>
BorderManager has some logging display options built in (described in my BMgr
3.x book - see the URL below), but mostly you are expected to use 3rd-party
log analysis tools.
See tip #21 at the URL below, and tip #72.
As for commercial programs to look at log files, I've heard Cyfin Reported is
good, but pricy. Any program which can read a web server's common log files
could be used to look at your proxy logs, though they may not give the output
you want.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Stuck with Management mode firmware upgrade..see pic

Management Mode
Firmware Upgrade
File Name:___________________ Browse
Apply Reset
How do I get around this. I upgraded to WRT54Gv5v6_1.02.5.002_fw.bin and now when I reboot this is all I get. If I try to go to another version I don't get connectivity. I only have connectivity for this part then I lose it.
Every time I type in 192.168.1.1 I always get this display....
I've tried to hold the reset up for 30sec the first time then 1min.......then unplug for 10 to 20 seconds, (still holding down the reset button) and reconnect. Letting go of the reset button once it's connected.
Is the router gone? Will I have to get another one? Would like to get your input.
Thanks

Download firmware file again. And browse for it, and upgrade it. Reboot router, it might work.

Solution Manager 3.2 upgrade to version 7.0

Hello All,
I am in the Solution Manager 3.2 upgrade to version 7.0.
In phase IS_SELECT "Upgrade Assistant" asks to add a few files update
components (Attachment: screens). Two of them (ST-SER and CPRXRPM) I
managed to find and read.
However, in the SAP Service Marketplace I can not find the new Add-On'ów:
ST and ST-ICO.
(For example:
ST - 400,
ST-ICO - 150_700)
Can I skip them in this step and leave the current versions?:
ST - 320 level 19
ST-ICO - 150_620 level 10
Best regards,

Those are part of the normal "upgrade" package - I wonder which DVDs you used to start the upgrade...
SAP Solution Manager 4.0 Upgrade (2) 1 of 11
etc.
Are you trying to do a Netweaver upgrade? This won't work...
Markus

Border Manager Radius Services

Can someone tell me how many DNS servers can you specify with Border
Manager Radius Services?

Kerry,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Border Manager and Cisco ACS connection

The NIC in the Border Manager server failed.
I installed a new NIC and gave it the same IP address and mask as the old
one. The lights on the NIC's in both boxes are green but I cannot ping one
from the other. They are connected with a cross-over cable
I was told I would have to set up a 'route' - help please.
The person who would normally set this up is sun bathing on an island
somewhere in the Indian Ocean.

> > In article <LShvd.6367$[email protected]>, wrote:
> > > The NIC in the Border Manager server failed.
> >
> > Which NIC? The public side, or the private side?
> >
> > > I installed a new NIC and gave it the same IP address and mask as
the
> old
> > > one.
> >
> > If this was on the public side, did you also rename the interface the
> same as
> > the old one? (If not, your filters may fail to filter).
> >
> > > The lights on the NIC's in both boxes are green but I cannot ping
one
> > > from the other. They are connected with a cross-over cable
> >
> > UNLOAD IPFLT (drops filters) for a test. If you did everything right,
> the
> > default filters may be blocking ICMP, and so you would normally not be
> able
> > to ping.
> >
> > > I was told I would have to set up a 'route' - help please.
> >
> > Seems unlikely. Changing a nic will not normally change any
configured
> > static routes, as they are stored in a separate file.
> >
> > > The person who would normally set this up is sun bathing on an
island
> > > somewhere in the Indian Ocean.
> >
> > Must be nice!
> >
> >
> > Craig Johnson
> > Novell Support Connection SysOp
> > *** For a current patch list, tips, handy files and books on
> > BorderManager, go to http://www.craigjconsulting.com ***
> >
>
> The card that I replaced in the Border Manager server had a 192.168.x.x
> address, connected to the card in the ACS box with a cross-over cable.
The
> card in the ACS box is also a 192.168.x.x address. I have a route set up
> to the 192.168.101.0 network specifying the ACS box address as the next
> hop.
> Mike
>
Problem solved, the card has blown in the ACS box.

Config Manager 2012 client upgrade (via package with batch commands)

Hello all,
I would like to kindly ask for your help with my question regarding a SCCM 2012 R2 client upgrade (from RTM to R2)
Recently, we have upgraded from RTM version of SCCM2012 to R2 (with the PXE hotfix applied)
During the process, I have choose not to upgrade clients when the SP1 was applied and go straight for the R2, which is not a problem I believe.
My question is regarding the pre-created packages, that are showing up in the console. I believe, that they are the easiest way to upgrade clients via packages in SCCM. (we can't push the installation due network policy)
This hotfix is stored here: \\"FQDN_site_server"\SMS_TSP\hotfix\KB2905002\Client\x64 (in case of x64 version, x86 is the same but x86 in the end)
The executed file from this path is this with this command following:
msiexec.exe /p configmgr2012ac-r2-kb2905002-x64.msp /L*v %TEMP%\configmgr2012ac-r2-kb2905002-x64.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous
Anyway, when we install the clients when we deploy it for the first on a machine, that has no client or we reinstall it, we do it with help of this batch command:
set curdir=%~dp0
%curdir%ccmsetup.exe SMSSITECODE=TSP /NoCRLCheck /UsePKIcert /forceinstall SMSMP=HTTPS://CML.LTSPRAGUE.CZ CCMHOSTNAME=CML.LTSPRAGUE.CZ
I just need to know, if I can use the prepared package from the console in our case and if it will keep the settings when the package is deployed.
I belive I have found a similar questin here on the forums:
http://social.technet.microsoft.com/Forums/en-US/c9b40687-1843-44c7-b61b-fd26d53ab90b/cumulative-update-3-and-agent-upgrade?forum=configmanagerdeployment
The second answer might the answer I'm looking for, but can you explain that to me like I'm five years old? :)
Please, let me know.
The IT guys from LukOIL

I'm not sure, because of my short time at the company, but there are historical security reasons for setting the push installation off.
Second reason are strict firewall rules used here. SCCM Agent may contact site server through HTTPS - that is a one way communication, so push installation isn't possible.
Don't mix "client push" and "automatic client update". See
http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/09/09/using-configuration-manager-automatic-client-upgrade-to-upgrade-to-the-latest-system-center-endpoint-protection-client.aspx for further details. (And yes, the article talks about SCEP, but
it also tells details about the entire process)
Torsten Meringer | http://www.mssccmfaq.de
Thank you for the article and your, but I find it easier to deploy packages right now.
I have found out, that there is a folder named "ClientUpgrade" in ConfigMgr installation folder.
I used this and made a package out of it. Deployment went fine as well as the installation of the upgrade for the client, but there is a problem now, that I don't see any software in the "Software Center" in "Available Software" - and there should be, since
I have may SW pointed to me and the list was populated before I have done the upgrade to the new version.
This may be a simple problem, but I really don't know what's wrong.
The IT guys from LukOIL

Extension manager would not upgrade. Alert box states could not move old extension out of the way. Suggestions?

Extension manager would not upgrade. Alert box states could not move old extension out of the way. Suggestions?

What you said confused me. Which version of Extension Manager do you use? Could you please attach a screenshot?

User Management problem after upgrade of SAP DB/Database Studio

Hi,
after upgrading SAP DB to 7.8.02.21 and Database Studio to the same version (this is on Windows 7 64 bit professional) I experience that starting DB Studio as a normal user fails with a message regarding not being able to execute (?) User Management. To start the program I have to run it as administrator. Once I do this it will, afterwards, work fine for a normal user, too, but only for one day (or possibly one logon to Windows 7).
(The error message does not even contain a hint to that solution)
In previous versions it was necessary to run DB Studio once (after installation) as an adminstrator. After that it would work all the same for normal users.
Is there a way to fix this? The desired behaviour being the one from previous versions that after one administrator run it can be started by my normal Windows user? It's, of course, not serious and I do know a workaround, but it's a bit annoying nonetheless.
(And yes, I do know that Windows 7 is not an officially supported platform. I'm just shyly asking).
Best regards,
Thomas

Hi Thomas,
due to the changes in the security concept in Windows 7 it's now required to be admin when you want to start or stop a service or to create 'global objects' like the shared memory files that are used to communicate between DBM-client, server and database kernel.
Since the user management of MaxDB Studio actually is just a small MaxDB instance, the service for this must be running.
To start the service and to create the shared memory the admin privilege is necessary on Windows 7.
What you may do is to flag the dbstudio.exe as "execute as administrator" - that will give you a pop-up warning every time you run the program but it will work.
I assume that is the workaround that you're already using and it's the one I use as well.
AFAIK the colleagues in Berlin are working on a version that doesn't require a MaxDB instance for local user management - that should remove this kind of problem as well.
regards,
Lars

Solution Manager Enterprise Edition upgrade slow

Hi
I am performing SOMAN 7.0 upgrade to Enterprise edition by upgrading kernel 701 and SP stack 18. I have already upgraded the kernel and java stack and now in the process of upgrading ABAP. I am expereincing really slow performance of this upgrade. I have checked tp and R3trans version which is uptodate as I updated kernel. I cant see any problem with CPU utilization as well swapping. I checked the SLOGs and there are no alerting errors. I see its moving and its very slow. I am just wondering if any of you guys experienced this - is this normal since this is a upgrade?

Thanks a lot, i realize the installation following the standard add-on installation procedure!
Now i have the ST-ETP
ST     400     0024     SAPKITL434     SAP Solution Manager Tool
ST-A/PI     01M_CRM570     0000     -     Application Servicetools for CRM 500 - 7
ST-ETP     100     0000     -     SAP Solution Manager Enterprise Edition
ST-ICO     150_700     0025     SAPK-1507PINSTPL     SAP Solution Manager Implementation Cont
ST-LV     100     0001     SAPK-10001INSTLV     SAP Landscape Verification Wizard
ST-SER     701_2010_1     0002     SAPKITLOS2     SAP Solution Manager Service Tools
Then don't forget to perform step 5. After the installation steps.
Step 5 says this:
5. After the installation
              To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
            a) In the case of ST-400 SP15-SP17
            To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
            b) In the case of ST-400 SP18 or higher
            The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
In my spro i don't have this options->
I see the route Activate Solution Manager Enhacements in SPRO -> Cross Scenario Settings
And in enterprise extension I only see ( SM_CRON, SM_QC_AD, SM_SSP,SM_SUPP_VAR)
I guess that this in SP24 is done automatically, but you said, that don´t forget the step 5 after installation.
update:I check for updates of SP and this add-on don´t have SP for now

Solution Manager 7.1 upgrade or configuration in Solman 7.0 EHP1

Hi,
We have a Solution Manager 7.0 EhP1 and there is a project now to configure several functionalities on it such as Charm and Services desk among others. We have the option of configuring all the functionalities in SOlman 7.0 EHP1 or upgrading to 7.1 and then configure the functionalities in the new version.
I would like to know if anybody has implemented an upgrade of Solman 7.0 EHP1 to Solman 7.1 with some functionalities implemented.
I would like as well if in the fact the the Solman 7.0 EHP1 has several functionalities implemented complicates the upgrade to Solman 7.1. The fact that the upgrade is more complicated due to all the functionalities configured, would be important factor to upgrade to 7.1 instead configure it in 7.0 EHP1.
Any information about this would be appreciated.
Many thanks in advance!
Raquel

Newer functionality and more holistically speaking, an ALM Tool, arguably one of the best in the market should be more than enough to take you to 7.1
if all you have is EWA, there is no major risk associated, the new 7.1 has new transaction types for ChaRM and Service Desk, the functionalities of which are better rounded and can support more enterprise wide processes.
Graphical Business Blueprint tool, my favorite feature in 7.1 and enhanced features in Project Implementation tools will only help you manage your implementations/support projects better.
If all you have is EWA, I have half a mind to ask you to do a fresh install, and not bother with the upgrade. Saves you time and lot of effort as well.

Solution Manager 7.1 Upgrade - ST add on release Issue

Good day
I have the following issue where the ST add on's are = the target release of the upgrade. The release is only on a higher patch level in 7.1(SPS4)
The step is Configuration(3) in SOLMANUP, it will not get past the phase of deciding to keep the add on's, the error is:
For the following Add-on component(s) the KEEP YOURS decision is not longer valid,
since at least for one of the base components an Add-on upgrade has been included:
ST-ICO     (changed base component: ST)
ST-PI      (changed base component: SAP_BASIS)
ST-SER     (changed base component: ST-PI)
You need to change the decision of the above Add-on(s).
Any ideas?
Thanks

Hi Miguel,
I am using SOLMANUP, I am using the installation/upgrade software and using SPS 4 as my target release. I am using SPS4_upgrade.xml in my download directory.
If I try using SPS 2 with SPS2_upgrade.xml it produces an error because my patch level of ST-PI is already patch 5 in my current system(Solution Manager 7.01 EHP1), and SPS 2 of Solution Manager 7.1 ST-PI = patch 4, that's why I am using SPS 4 stack as it is a higher level that my current patch level of ST-PI.
The issue is that the mentioned ST add-on's are the same release as the target release, the only difference is the patch level. The upgrade recognises that the source and target release is the same, but will not let me keep with Decision = Keep
Thanks
Derek

Ideas on adding licenses to a 8.X Communications Manager cluster before upgrade to v10.

Hi, hope is all well. This is something I started working with my global Cisco reseller but it takes sometime I wanted to make sure I see different options if possible to present. My company has deployments of collaboration products mainly on v8.x (all three main 8.0.2, 8.5.1 and 8.6.2) going to v10 during this year. Some already run on UCS but some are on MCS and will be late in migration. For those late, there are some growth need in end user/phone deployment but since v8 is end of sale, my provider may not be able to sell licenses.
If this is true, they might offer to buy v10 licenses with software subscription just like new deployment, which is not too bad at all since we will use this added amount on future v10 upgrade, but has anyone ever did that? I am afraid we use v10 PAK (if possible) to generate v8 license file, will render it not upgradable later. Reasoning is, let's say there is 1000 licenses on v8 with UCSS and we buy 15 v10 licenses downgraded to v8. Once we processo v8 to v10 upgrade on PUT, Cisco might see only 1000 original v8 liceses to provide upgrade instead of 1015.
Does it make sense or am I missing something here? Thank you very much for any suggestions.

UCSS and CUCM 8.X licenses have both been EoL. Even the existing UCSS+ ESW has been converted to SWSS.
Ref: CUCM 8.X Device and Licenses EoL notification
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-732309.html
Customers may be able to continue to purchase Cisco Unified Communications Manager Version 8.x Phone Units and Device License Units the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: http://www.cisco.com/go/eos.
Product Migration Options
Customers are encouraged to migrate to the Cisco Unified Communications Manager v 9.2 or later.
Ref: UCSS EoL
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-software-subscription/eos-eol-notice-c51-732026.html
-Terry
Please rate all helpful posts

Border Manager 3.9 upgrade

Similar Messages

Maybe you are looking for