BPE_Adapter

HI all
Can anybody through some light on this?. During execution of BPM I am getting the error related to this BPE_Adapter..
thanks
N.Prasad Babu

Hi Prasad Babu,
Go to Transaction SXI_CACHE and make sure your BPM Process is with Status "0". If it is with status 99, click on "repeat activation" button to reactivate it.
Also, Refer to this document on SDN
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to monitor integration processes ccbpm.pdf
Rgds,
Sam Raju

Similar Messages

Error in BPM in PI 7.1 : BPE_ADAPTER" UNKNOWN_MESSAGE

Hi All,
I have made some changes in Integration process in PI 7.1 and executed my interface, but now it is giving error BPE_ADAPTER">UNKNOWN_MESSAGE. Also it is showing "No object type found for the message. Check that the corresponding process is activated".
I have also checked in SXI_CACHE if the integration process is activated or not. It is showing return code 0.
I have deleted my BPM and created same with a new name and created whole ID part again with a new integration process, but the above error is still there.
The process is getting stuck at the CALL ADAPTER step.
Can anyone tell me where the problem occured exaclty?

Satish,
Thanks for replying,
Actually I have created a new integration process wih new name deleting the previous one and then created whole ID part for the new integration process importing the new IP in my ID. Also checked if that new IP is activated in the SXI_CACHE. But still that error is occuring in SXMB_MONI in CALL ADAPTER step. I have not checked the queue in SMQ2 but does it matter as I have created new integration process and ID part agian?

How to resolve "BPE_ADAPTER SYSTEM_FAILURE_INTERNAL" error in moni.

I am getting 3 files from legacy systemi am merging 3 files using BPM sending APO system using proxy., When i am testing in dev it was worked fine after transporting it QA i an getting below error and in sxi_cache its shoing integration process return code 99.after activating at sxi_cache its showing status 0 but still showing below error in SXMB_MONI.please help me..
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Seshagiri.

Its a bit generic error. So many things could be checked:
1. In SWWL, delete the earlier running instances before running the new scenario.
2. Reimport the IP in ID again. Save, activate and try running your scenario again.
3. In tcode sxmb_adm_bpe - Automatic BPM Customizing, check for the error.
4. Check if SWF_XI_CUSTOMIZING appears green.
Regards,
Prateek Raj Srivastava

BPE_ADAPTER MESSAGE_NOT_USED Message is not used by any processes

We need some help on BPM flow. We are at it for last 3 days without much progress. We are able to make sync call to same BAPIs and get data without any issue. However, with BPM we have this issue
I am creating the simplest integration scenario as
1.       HTML/HTTP-->BPM (Async)
2.       BPM-->R/3 (Sync)
3.       BPM-->File (Async)
Created all required interfaces and mapping. I have some dummy mapping for first 2 cases. I am able to activate the integration scenario and Integration Process without any error. I am able to import it in integration directory successfully without any error. When I am executing the first async request from HTML client I am invariably end up with an error from sxmb_moni as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is not used by any processes</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The BPM is not getting invoked. Looking at the trace it shows that there is an error after creating BPE proxy for message as
<Trace level="3" type="T">created BPE proxy for message DE5FB5802F33D3F19373005056A12466</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
What I have checked so far:
1.    I have checked that the developer key is assigned to my user id
2.    Used SWF_XI_CUSTOMIZING to make sure that all the process are green
3.    Used sxi_cache to make sure that the BPM process has return code 0 and also reactivated it numerous times. Also checked activation log and no error there
4.    Used SXMP_ADM_BPEAutomatic BPM Customizing to check all the entries are green
5. There are not any message in sxmb_moni_bpe for my interface shows no message
Input call has:
1.    Sender Service: MFG_BPM_BusinessSystem
2.    Sender Interface: MI_Outbound_Async
3.    Quality Of Service: EO
4.    Sender Name space: Name space
5.    Input XML:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:BAPI_SALESORDER_GETLIST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
   <CUSTOMER_NUMBER>0000001000</CUSTOMER_NUMBER>
   <DOCUMENT_DATE/>
   <DOCUMENT_DATE_TO/>
   <MATERIAL/>
   <MATERIAL_EVG>
      <MATERIAL_EXT/>
      <MATERIAL_VERS/>
      <MATERIAL_GUID/>
   </MATERIAL_EVG>
   <PURCHASE_ORDER/>
   <PURCHASE_ORDER_NUMBER/>
   <SALES_ORGANIZATION>1000</SALES_ORGANIZATION>
   <TRANSACTION_GROUP/>
   <SALES_ORDERS>
      <item>
      </item>
   </SALES_ORDERS>
</ns0:BAPI_SALESORDER_GETLIST>
Any clue, help pointer will be of great help. Just beats me, what is wrong!!
Version:
SAP R/3 ECC 6.0
XI 7.0

Hi,
Please check these threads where they have the same issue:
Message is not used by any processes
Error: Message is not used by any processes
Error: BPE_ADAPTER Message not used in any process
Message is not used by any processes
---Satish

"BPE_ADAPTER" SYSTEM_FAILURE_INTERNAL

Hi Experts,
I saw the previous blogs on the "BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL failures but i didn't get the solution.
My Scenario is SOAP to RFC to FILE with Asyn/Sync Bridge using BPM(Aync Receive, Sync Send,Send ), while I am testing messages are failing with the below error.
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="*BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL*</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>.
I activated the BPM, the return code is '0'. but there is no business process workflow in SXMB_MONI_BPE and SXMB_MONI.
This is the first time we are developing the BPM interfaces for the project, what are the configuration has to be done, please help on this.
Thanks in Advance,
snrvakiti.

Hi Michal,
The scenario in that blog is FILE to RFC to FILE, but my requirement is SOAP to RFC to FILE, and today i tried with simple BPM scenario,it is also failing with the same error.
In trace i notice that its unable to fine the abstract interface i.e. its not entering the BPM.
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
Actually previously we are using the SOAP to RFC synchronous Scenario, but its not supporting the business with 1000 line items of soap request.soap URL connection is closing by the time the request from the R3 system. so now we are looking to send the response in asingle file to the user.
can you plz help me with BPE Adapter configuration.
Thanks in advance,
snrvakiti

BPE_adapter The process does not support the given synchronous interface

We are using PI 7.0 Sp 14 .
Old dev box needed to be upgrade with 64 bit hardware. We did a fresh installation and done all the technical configuraiton. Imported SLD , IR,ID , Runtime value mapping . All scenario working fine after migration except one particular scenari which involves SOAP Web service .
Our scenario is Extern system send SOAP call to PI - BPM_SYNC_ASYnc_process --> BPM Proxy_send
this BPM proxy_send to ECC R/eceiver at R/3
We are getting the following error after migraiton. Please help
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
Error! Hyperlink reference not valid. <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>

Is there any other Configuration to be done at the Abap side part from BPE_XI_customising (Automatic customising) done as part of the post installation steps .
Wondering any other configuration needs to be done at the ABAP side (as BPE is running on the ABAp stack) to resolve this.
Thanks

Error: BPE_ADAPTER Message not used in any process

Please help me fix this error.
My scenario is i have a bpm process for merging three files.
and i configured in this way..
merge the three files into one and send into SAP
i have three communication channels (file adapter) for three files
one communication channel xi adapter for a proxy into sap.
using these files as input to BPM process
then using BPM process as sender to the proxy reciever
I am getting error from sxmb_moni in xi box
as error category:BPE_ADAPTER
error id: message_not_used.
it says message not used in any process.
please help me correct this problem..
thanks
jp

JP,
Are u sure there is nothing wrong in your design part? Also Are u using Fork to receive 3 files parallely, If yes then all the 3 files has been checked for start process? Can u confirm this.
Also in the Inerface determinations did u gave abstract interfaces that BPM is recieving?
Best regards,
raj.

BPM Error: BPE_ADAPTER MESSAGE_NOT_USED

Hi,
we have an issue in our XI production system, where message is not reaching BPM and its giving below error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
We carried out following steps:
1. Did cache refresh using Tcode 'sxi_cache', IP object is giving return code as "99".
2. We deleted the Integration Process object from Integration directory and reimported the object from Integration Reporsitory again.
3. We re-imported the IR object from QA server again in Production, but it still didn't work. (It is working fine in QA environment).
4. We went through following SAP Note 901366 & 910437 (Both have been applied).
Can you please help us resolve this issue at the earliest.
Regards,
Ashish

Hi Orit,
We had this issue because workflow customizing object for use of xml object types was not activated in our system.
This issue was resolved using tcode 'SWF_XI_CUSTOMIZING', and activate 'Activate Use of XML Object Types'.
Hope this helps!!!
Regards,
Ashish

BPM - BPE_ADAPTER : Unknown message Type

Hello Experts,
I am developing a simple BPM scenario with just one receive and one send step. I have configured bothl the BPM steps along with the container elements and verified the objects in IR and ID. In SXI_CACHE the status of teh Integartion Process is '0' which is the correct. I tried reactivationg and redeploying the process several times too, yet message in PI faile with the below error description:

- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody advice please?
Thanks in advance,
Elizabeth.

In SXI_CACHE the status of teh Integartion Process is '0' which is the correct. I tried reactivationg and redeploying the
process several times too, yet message in PI faile with the below error description:
In that case, delete the ID part for this scenario and redo the objects....from importing the IP into ID.
If still not working then the BPM itself has to be recreated.
If all the messages are properly configured in the BPM and still it is giving the error then it is a CACHE issue.
I hope the BPM is just for practice purpose and not related to any project...as the design does not require to have a BPM
Regards,
Abhishek.

BPE_ADAPTER error

Kindly help in this regards.. its a file to file Bpm collect message scenario
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

can any one help me out wat the error is... i cross checked my
message interfaces and recevr and interface determination all are mentioned rite... could u please help out...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
<SAP:MessageId>66CF66D6-077B-4ED2-0AC9-D44FEB6F67E9</SAP:MessageId>
<SAP:TimeSent>2009-03-12T11:55:35Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Service>BS_Bpm_file</SAP:Service>
<SAP:Interface namespace="http://capgemini/mumbai/upgrade">BpmPatternCollectIfToBeCollected</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>BPMPatternCollectMessage</SAP:Service>
<SAP:Interface namespace="http://capgemini/mumbai/upgrade">BpmPatternCollectIfCollected</SAP:Interface>
<SAP:Mapping notRequired="X" />
</SAP:Receiver>
<SAP:Interface namespace="http://capgemini/mumbai/upgrade">BpmPatternCollectIfCollected</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2009-03-12T11:55:35Z" wasRead="false">
<SAP:Engine type="AE">af.xi1.inbomsap11</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
<SAP:MessageId>66CF66D6-077B-4ED2-0AC9-D44FEB6F67E9</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
- <SAP:Hop timeStamp="2009-03-12T11:55:36Z" wasRead="false">
<SAP:Engine type="IS">is.00.inbomsap11</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>66CF66D6-077B-4ED2-0AC9-D44FEB6F67E9</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2009-03-12T11:55:37Z" wasRead="false">
<SAP:Engine type="PE" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">PE</SAP:Adapter>
<SAP:MessageId>66CF66D6-077B-4ED2-0AC9-D44FEB6F67E9</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>

BPE_ADAPTER error on async BPM

I am trying to build the Collect Time-Dependent scenario in BPM and I'm getting a BPE_ADAPTER error. This is our first attempt at using BPM. The error says Unknown_Message, "No object type found for this message" and is part of category XI Adapter. I am trying to receive an IDoc, map it to a file structure, and append the file structure to a list. After a set time period has elapsed, I want to FTP the collected data file to the destination. I deleted everything from the process except the receive and send steps and I still get the error. It appears to be happening in the Call Adapter step in the XI pipeline. Any idea what could be wrong?

Hi Lisa,
There is one more SAP note which talks about this SWF_STRING stuff.....but i dont remember the OSS note number now. I will get it for you on monday.
Try the following:
Select your integration process from SXI_CACHE and click on the "activate" button.You will be navigated to the next screen. In this second screen, there will be an option to "delete" this process. Delete it.
Then make a change to your integration process in repository say for e.g. add and remove description.And Save and activate it.
Now check the status of the Integration process in SXI_CACHE to see whether the return code is 0.
Let me know how it goes.
Regards,
Sridhar
Message was edited by: Sridhar Rajan Natarajan

BPM - BPE_ADAPTER errors

I am trying to follow Arpit's blog for the RFC Scenario using BPM --Starter Kit
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
I am getting the following error in Call adapter
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
Also something very curious is that my Interface determination, shows the receiver interface same as my sender interface.. But my receiver determination in ID is configured correctly... SXI_CACHE has '0' for my IP.
- <SAP:Sender>
<SAP:Service>BS_SEND_SERVICE</SAP:Service>
<SAP:Interface">FileRequest_OUT_MI</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>File_RFC_BP</SAP:Service>
<SAP:Interface namespace="xxx">FileRequest_OUT_MI </SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="xxx">FileRequest_OUT_MI</SAP:Interface>

Check the following links.
BPE_ADAPTER error on async BPM
https://websmp105.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf

BPE_ADAPTER failure with S/A Bridge BPM

Hello all,
I've got really strange problem. After two days of searching I'd like to know your opinion.
I'm testing simple BPM with S/A Bridge. Inside there is only a transformation of incoming message to response message - just for testing purposes. According to the thread [How to close S/A bridge immediatly without calling any asyn comm?|How to close S/A bridge immediatly without calling any asyn comm?] it's possible to do this.
And now the troubles: on one installation of XI7.0 SP14 all works fine, on other two installations (SP11 and SP13) it doesn't work with same symptoms:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
and the last information from the trace is:
<Trace level="1" type="B" name="SA_COMM">
<Trace level="1" type="T">Start Sync/Async Communication</Trace>
<Trace level="1" type="Timestamp">2008-12-01T19:27:55Z CET Starting Processing</Trace>
<Trace level="1" type="T">Pipeline Timeout: 01.12.2008 20:28:55 CET</Trace>
<Trace level="3" type="T">Calling BPE Adapter</Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="3" type="T">Processing mode is</Trace>
<Trace level="3" type="T">set corresponding asynchron interface IF_IPSAB_DATA_ABST</Trace>
<Trace level="3" type="T">created BPE proxy for message 26E10930BFDE11DD8A62005056AD7BF9</Trace>
<Trace level="3" type="T">inserted message into pipeline PE_ADAPTER</Trace>
<Trace level="3" type="T">reset to synchron interface IF_IPSAB_SYNC_ABS http://xxx.zz</Trace>
<Trace level="1" type="T">Destination not found:</Trace>
</Trace>
</Trace>
All was triple checked, triple generated, checked against working system, SXI_CACHE-BPMs have got sy-subrc 0 .. all seems fine.
One thing to be mentioned - there is no records in SXMB_MONI_BPE, so it seems to me that the BPM is not activated at all.
Do you have any the slightiest idea what might be wrong ?
Thank you in advance.
Best regards
Tomas

Hello again,
I did some sarching and comparing in the trace log. The trace logs from "working" and "not working" system are nearly the same. There are minor exception but I count it as a different logging as from the systems with different SP level.
Now here are the parts, which tell something about the problem. First from working system:
<Trace level="3" type="T">reset to synchron interface MI_TST_IPSAB_ABS http://dummy.max</Trace>
<Trace level="1" type="Timestamp">2008-12-02T07:11:05Z CET qRFC raised on XBQO$PE_WS90000001</Trace>
<Trace level="3" type="T"> setting SA BPE state to wait for 62B5E270C04011DDC33D001CC0781F94</Trace>
.. now from not working system
<Trace level="3" type="T">reset to synchron interface IF_IPSAB_SYNC_ABS http://xxx.zz</Trace>
<Trace level="1" type="T"> Destination not found: </Trace>
It still seems to me, that something is not generated correctly.
Any ideas ?
Tomas

CcBPM - BPE_ADAPTER : SYSTEM_FAILURE_INTERNAL

Hi gurus,
I am facing below errorn in ccBPM
<SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>An internal error has occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I checke din sxi_cache and it shows return code - 0 , what could be the reason!!!

Try this :
The BPE Adapter error may be also because of Inactive version of BPM runtime
So as suggested check the SXI_CACHE again and make sure that Return value is 0.
Also do this: Go to Transaction SWWL and delete all the errored entries which belongs to your integration scenario
Then you can re-import the Integration Process into Directory so that it will be re-active.
Solution:
Step maintain prefix numbers allows you assign number ranges to your custom workflows on the ABAP side (BPMs)
This is a post install step - pretty easy... You can ask your basis person, or do it yourself --> click on the execute icon and enter a number range e.g. 99* will work.
As for your BPM - first step is check if the BPM was succesfully replicated to the ABAP side. SXI_CACHE, select the BPM and ensure RC is '0'.
If all this works, then thats a good start.
After that, check your queues, check SWI1 and check SWPR - for the possible errors with that BPM...
Of course check RWB for the initial message that should have kickstarted this scenario and look at the status.
check this links who has same error,their problem got rectified:
BPE Issue
BPM activation problem

Error BPE_ADAPTER" SYSTEM_FAILURE_INTERNAL

Hello,
I have a problem in XI, now any RFC access it is running. We can not access to R/3 by BAPI or to send an idoc.
We have all the BPM with CR 0.
The error is after a generic BPM to collect the idocs. Then we send the data collected to a mapping out of the BPM and we obtain this error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand=""><SAP:Category>XIAdapter</SAP:Category><SAP:Code area="BPE_ADAPTER">SYSTEM_FAILURE_INTERNAL</SAP:Code><SAP:P1/><SAP:P2/><SAP:P3/><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>An internal error has occurred
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error>
I tried to delete with swwl all the processes and to refresh the cache, but we still have the same issue.
This morning we have restarted XI machine and the interfaces are not running. All are failing we we send an idoc to R/3 or do an RFC access to retrieve data by BAPI.
Do you know what could be the solution to this issue?
Regards,
Xavier.

Hi Viniytha/ All
Chck whether your integration Process is active.. in IR. or reactivate it. Then In configuration delete the existing IP , again import and activate . See if it works. I had faced a similar issue. I reactivated the IP in repository( copied,deleted and made a new one) and this worked.
I have done all above activities . But when I check SXI_CACHE
It says Problem during cache refresh.
Problem when updating object OutboundBinding-4F43C177727735A3BBE61EBB5C9DD85A. :Error occurred while creating profile for receiver agreement 4F43C177727735A3BBE61EBB5C9DD85A; channel A3C5F6D836BC3CB9925A8794E30AA758 not found on the Integration Server
I cannot see my bpm object in Integartion Process Node
I do not why I am getting the above error and not able to see my bpm object in Integartion Process Node
Regards

BPE_Adapter

Similar Messages

Maybe you are looking for