BPM Alert - P.O created without purch req

Hi all,
I have an issue where my BPM alert "purchase order lines created without reference to a purch req" sometimes gives me a P.O that was creatd with ref to a P.O. I have raised an OSS note for SAP but I was wondering if anyone else had a similiar issueor if they have the same alert but it functions correctly?
Thanks,
Kev

Hi Kevin,
as already explained via another communication channel I think the collector is working perfectly fine. Be aware that, like most other Procurement collectors, we are checking on line item level and not only on document level. As your example shows ONLY line item 20 is created without PR reference. But your screenshot of the document itself shows line item 10 which is created with a PR reference and hence was not in our output list. Also a look in table EKPO shows that one item was created with reference and the other wasnu2019t.
Best Regards
Volker

Similar Messages

  • BPM Alert Issue - P.O Created withour ref to Purch Req

    Hi,
    Has anyone else had any issues with the BPM alert "P.o's created without ref to a P.O";? It seems to be reporting incorrectly - it gives us sometimes P.O that were in fact created with ref to a purch req.
    I've raised an OSS for this with Sap - although I'm still awaiting a response...Has anyone had the same issue described above?
    Thanks,
    K
    Edited by: Kevin Devaney on Nov 11, 2010 11:39 AM

    Hi Kevin,
    as already explained via another communication channel I think the collector is working perfectly fine. Be aware that, like most other Procurement collectors, we are checking on line item level and not only on document level. As your example shows ONLY line item 20 is created without PR reference. But your screenshot of the document itself shows line item 10 which is created with a PR reference and hence was not in our output list. Also a look in table EKPO shows that one item was created with reference and the other wasnu2019t.
    Best Regards
    Volker

  • Alert on a variable without BPM

    Hello,
    I have implemented a Idoc-PI-File scenario to integrate ECC to ESourcing.
    I have implemented basic alert with the help of SAP ABAP table.
    I want to trigger alert on a specific variable/field of the payload.
    I can do that with the help of BPM. Is it possible without BPM?
    Kindly reply.
    Thanks & Regards,
    Vishal K

    Hi Vishal,
    As mentioned in the blog /people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function, alerts can be triggered from UDF.
    In PI7.1, alerts can be triggered by using "RFC Lookup" standard function instead of UDF. SALERT_CREATE need to be used in the "RFC Lookup" standard function of Graphical Mapping. Refer this blog to work on RFC Lookup: http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20befc9a-aa72-2b10-ae9b-b0988791d457
    Regards,
    Geetha

  • BPM alert issue

    Hi,
    i created bpm with block step in that i was used deadline exception branch, while testing the message was processed successfully but message also going to excetion and deadline branch and creating alerts.(but there no exception found).i gave the deadline branch processing time is 2 mins and i created alert in exception branch but getting any error its going to exceptio branch.please can anyone help in the issue.
    Thanks,
    Seshagiri

    Hi Kevin,
    as already explained via another communication channel I think the collector is working perfectly fine. Be aware that, like most other Procurement collectors, we are checking on line item level and not only on document level. As your example shows ONLY line item 20 is created without PR reference. But your screenshot of the document itself shows line item 10 which is created with a PR reference and hence was not in our output list. Also a look in table EKPO shows that one item was created with reference and the other wasnu2019t.
    Best Regards
    Volker

  • Purch.Req for STO

    Dear Experts...
    1. Can we have a Purchase Requisition for the STO? Our client based in Kochin has branches in other states like Delhi, Kolkata,  
        Andhra etc..the sales requirement data collected from branches will be sent to Kochi head office, and Kochi will create Stock
       Transfer Order to transfer the Finished Goods to the requesting branch for sales..Here I want to know what document in SAP  
       can be entered to proceed to STO ? (Like the case of conveting Purch Req to PO)
    2. Our Client has 8 categories of finished products for eg. Spices, Soup mixtures, Seafood varieties etc, and in each of this 
        catrgory  they have many classifications, for eg. in Spices category they have cardamom mix, pepper-ginger mix etc, same is
        the case for other categories. For reporting, they want to capture the COSTING reports for each category. My question is, 
        can these CATEGORIES be defined in the MATERIAL GROUP, so that can we generate reports based on the Material Group? 
        What data is pulled from MM module for costing? when costing which price is taken? material master Avg Price or PO price of
       that GRN which is issued to the Production?
    Please suggest some solutions
    Suraj

    Thanks for the reply...
    Please give me some info on what data will be pulled from MM for Product Costing. I believe it is the price of the raw materials issued to production, depending on its value in PO. We are maintaining batches to manage the raw materials. Since we maintain the Moving Avg Price for valuation, there will be an average value in the material maste. In order to take the exact value for costing we use FIFO method, wherein the values will be pulled from the PO. Please correct me if Iam wrong and suggest the correct procedure.
    regards
    Suraj

  • Status of Purch Req

    Hi,
    On SAP release 46C the processing status of a purchase requisition is not updated during the creation of a contract.
    When I create a contract WK from a PR NB, the staus of Purch Req display only "Contract Created" but not displays the details of the Contract.
    Thanks and regards
    Michela

    Hello,
    The similar issue is reported in the SDN threads earlier:
    Status Update Issue with PR doc type NB
    Check if the contract is created correctly with the right assignment.also once you have created a contract with the particular account assignment, u cannot change it. You would have to create a new contract with the desired account assignment category and then try creating a PR. Hope this helps!
    Regards

  • Excise invoice should not get created without PGI

    Hi,
    I have a scenario where the billing document is being generated by the customer without PGI after creation of outbound delivery for exports. (This is as per customer's requirement - Copy control maintained in VTFL for the same - copying requirements 11 )
    This creates a situation - excise invoice can be created without PGI - which creates problems for customer. This should not happen.
    Customer wants a check during the excise invoice creation - excise invoice should not get created if PGI has not been done.
    Kindly advise as to how this can be done.
    Regards,
    T Saravanan

    Dear Saravanan
    Two options are there
    -  in your existing routine itself, you can specify the control in such a way that unless the preceding document is PGId
    -  apply excise user exits like J_1I7_USEREXIT_EXCISE_BEF_SAVE to achieve the requirement.
    thanks
    G. Lakshmipathi

  • How can I verify an apple id already created without attaching a credit card?

    how can I verify an apple id already created without attaching a credit card?

    Why do you need to verify it? Have you received an email telling you to click a link to do so? - if so it's very possible that it's a scam designed to trick you into entering your credit card details. If you have received such an email don't follow any links in it. If it's not addressed to you by name it's unlikely to be from Apple.
    You could copy and paste the email into a post here so that we can have a look at it - remove your own email address when you do this.
    If there is some other reason you want to verify the ID please give more details.

  • Converting SNP Planned Order /Purch Req to Prod.Order/Purch.Order

    Guys
    What is the standard process to Convert the SNP Planned Order /Purch Req. into a Prod.Order/Purch.Order ?
    Can the conversion indicator be set in APO for SNP Planned Order /Purch Req.and then transferred to R3 as Prod.Order/Purch.Order  or can the convesrion of Planned Order /Purch Req to Prod.Order/Purch.Order  can be done in R3 itself ?
    I am not clear on how exactly this works. Would appreicate if you could provide me with the standard process and any config involved in the same such as Number Ranges and how to set the conversion indicator automatically through SNP planning runs ?
    Thanks

    When you set this indicator for a planned order or a purchase
    requisition, the system automatically converts the order into a
    Production order or purchase order after the transfer to the
    connected SAP R/3 system.
    The converted orders are then retransferred to the SAP APO system with a
    different category; a purchase requisition with category BS-ANF becomes
    a purchase order delivery schedule line with category BS-EIN.
    Please check configuration setting in SPro for transfer setting to R/3.
    1. Configure Transfer to OLTP Systems(SNP)
    2.Maintain Global Parameters and Defaults(PPDS)
    Also on R/3 side you can see it in MD04/MD07 collectively for a product . or individually on
    MD13 : planned order
    MB51n: PR
    Manish

  • Not running MRP but has Purch Req with Sales Order as pegged reqmnt in AFS

    Hello Gurus!
    MRP run is activated in the Plant but we do not run MRP (no MRP batch job nor manual MRP). However, there are materials that have Purch Reqs with creation indicator as MRP showing pegged reqmnt from Sales Order even if Item category is the same.
    My initial check shows that those materials with issue has MRP Indicator as BLANK(Multi-level, transaction dependent MRP) and those that do not generate Purch Req from SOs has N(No transaction-dependent MRP). However, transaction dependent MRP is not activated.
    Can you provide areas where I should check/other probable cause of this?
    Your valuable insights is deeply appreciated. Thanks!

    Hello?
    I just want to update how this was resolved.
    I found out that MRP Indicator field in AFS MRP view for the materials with MRP generated Purch Reqs is maintained as BLANK(Multi-level, transaction dependent MRP) in AFS MRP view instead of N(No transaction-dependent MRP) but there is no transaction group maintained. So MRP run is triggered whenevert there is MRP relevant transactions performed.

  • BPM Alert in SolMan

    Hello All,
    Just want to ask how to stop the BPM alert in SOlMan from sending to a specific email.
    Where can I check the configuration? What steps to do?
    Thanks and regards,
    Eco

    Hi Eco
    You mentioned, you want to stop BPMon alert e-mail right.
    If I understand your situation correctly, you might already setup BPMon and activate.
    To setop the BPMon alert, you can remove e-mail notification setting from BPMon session where you setup
    monitoring object, key figure threshold value.
    In your BPMon setup session, under the specific business process step to that you assigned some monitoring objects,
    you may see area called "notification".
    Here you might defined e-mail sender and receiver setting, also condition to send e-mail.
    So if you remove your setting in this area (leave it blank) you will not receive e-mail alerting to that monitoring object.
    I hope this help your.
    Best Regards
    Keiji Mishima

  • BPM Alert MultiLine

    I had setup my BPM alerts based on this blog
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken]
    I need to send a multi line errors from a multi line container variable in BPM. This works fine if I set up the alerts description as "Errors are &ErrorListML[]&.". If I setup the alerts description as "Errors are &ErrorListML##&.", the email has no body other than Alert Id.
    Any help will be appreciated.
    Thanks

    hi,
    two ways:)
    first try to send all data to ECC for check (you can go for async with correlation - even
    based on guid if you don't have anything else)
    use ABAP proxies if possible (so you'll be able to
    restart and monitor the flow in ECC too)
    then use IDOC bundling to send all IDOCs at once as per my weblog:
    /people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
    this way you will have to worry about 2 outbound messages (from XI)
    and one inbound (from ECC to XI)
    Regards,
    michal

  • How to use selection buttons in an ALV created without abap objects?

    Hi, I use an alv created without ABAP Objects to show some information. Can I introduce inside the alv, the top buttons to select all rows / none row? And the second question, how may I introduce lateral buttons in the ALV to select indidividual rows?
    Thanks!

    HI
    i think you use REUSE_ALV_LIST_DISPLAY or REUSE_ALV_GRID_DISPLAY FMs.
    Try to calling the function in this way
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
          EXPORTING
    *      I_INTERFACE_CHECK              = ' '
    *      I_BYPASSING_BUFFER             =
    *      I_BUFFER_ACTIVE                = ' '
           i_callback_program             = 'YOURREPORT'
           i_callback_pf_status_set       = 'SET_PF_STATUS'
           i_callback_user_command        = 'USER_COMAND'
    *      I_STRUCTURE_NAME               =
           is_layout                      =  ls_layout
           it_fieldcat                    =  fieldcat
    *      IT_EXCLUDING                   =
    *      IT_SPECIAL_GROUPS              =
    *      IT_SORT                        =
    *      IT_FILTER                      =
    *      IS_SEL_HIDE                    =
    *      I_DEFAULT                      = 'X'
           i_save                         = 'A'
          is_variant                     = gt_variant
          it_events                      = event_tab
    *      IT_EVENT_EXIT                  =
    *      IS_PRINT                       =
    *      IS_REPREP_ID                   =
    *      I_SCREEN_START_COLUMN          = 0
    *      I_SCREEN_START_LINE            = 0
    *      I_SCREEN_END_COLUMN            = 0
    *      I_SCREEN_END_LINE              = 0
    *    IMPORTING
    *      E_EXIT_CAUSED_BY_CALLER        =
    *      ES_EXIT_CAUSED_BY_USER         =
           TABLES
             t_outtab                     = tb_output
          EXCEPTIONS
            program_error                  = 1
            OTHERS                         = 2.
    ENDFORM.                    " LISTA
    where
    'SET_PF_STATUS'
    'USER_COMAND'
    are two form like this.
    FORM set_pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZSTANDARD'. " EXCLUDING rt_extab.
    ENDFORM.                               " SET_PF_STATUS
    FORM user_comand USING r_ucomm     LIKE sy-ucomm
                             rs_selfield TYPE slis_selfield.
      CASE r_ucomm.
        WHEN '&CPR'.
        WHEN 'YOUR CODE FUNCTION'
    endcase.
    I hope it can help you.
    Bye
    enzo

  • Sales order created without contract

    Hi Sap Gurus,
    We create sales order through contract, But 2 days back contract got deleted and the sales orders created without the contract doesnt have price on it. Now we have many sales order without contract and no price. Is there any way i can update the contract or price to the sales orders other than reversing it
    Cheers
    Edie

    hi
    go to t.code OVKJ or OVTP
    And assign DUPP with ur Sales doc type and Billing type.
    ur probs will be solved( don't forget to check OVKK)
    thanks
    mk

  • Find debit and credit memos created without reference

    Hi Experts
    Could you please tell the easy way to find out credit memos and debit memos created without reference to oringinal order.
    Regards,
    Santosh

    hello, friend.
    try a query using table VBFA.  specify the document category in both preceding (sales invoice) and subsequent documents (debit/credit memos).
    this should help you.
    regards.
    p.s.
    in this particular case, in VBFA only credit/debit memos with reference to invoices will be displayed.  this can be compared to VA05.
    Edited by: jonathan y on Mar 27, 2009 1:22 PM

Maybe you are looking for