BPM Multiple message not stopped after exception

Hello All,
I have scenario:
DB -> XI -> SAP (IDOC)
In one message from DB I am sending multiple rows which I am transforming to multiple IDOCs. Everything works fine until one of rows have an error in data. When error occur BPM process stops and is not sending rest of the rows. I would like this scenario to not break after error row and send all messages except error ones.
I tried to use exception, but it does not work the way I want - it does not sent rest of messages.
Thank You in advance for your help.
best regards
Dawid

Hi Dawid,
1. what kind of error do you mean ? mapping error ?
if it's a mapping error maybe you can catch it inside your mapping
so that it will not result in an exception and you can just
remove the incorrect IDOC from the R3 (bd87) and the rest would be
processed correctly?
2. why do use use a BPM to map DB to multiple IDOCs?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Similar Messages

Error msg: "Config message not received after 45 seconds"

I have developed a simple stateless session bean. After being called once, the following is output to the log:
Thu Jan 04 18:15:46 CST 2001: <RJVM> Signaling peer 3978882810638278829C198.171.129.36 gone: weblogic.rjvm.PeerGoneException:
- with nested exception:
[java.net.SocketException: Connection reset by peer]
Exactly 45 seconds later the following is output and I can no longer access a JDBC connection from my pool:
Thu Jan 04 18:16:31 CST 2001: <CliCon-#|myserver|0.978653734170> Connection to client for ClientContext - id: '#|myserver|0.978653734170', bound: 'true', dead: 'false' has been unexpectedly lost be
cause weblogic.rjvm.PeerGoneException: Config message not received after 45 seconds.
Initiating hard disconnect.
Can anyone shed some light on this for me?
Thanks in advance!

Hi,
this is the explanation why this occours:
If there is a t3 Client connects to the server, every ( weblogic.system.configTimeoutCheckVal
) time, ConfigTimeoutChecker will run to check the t3 client is disconnected or
not. The problem is, if the client has already disconnected, the ConfigTimeoutChecker
still runs every time to check the disconnected t3Client again and again.
This should be solved with SP11.
Christian Plenagl
Developer Relations Engineer
BEA Support
"kelvin" <[email protected]> wrote:
>
I am using WLS 5.1 sp8 128SSL, I got this error. I results that the java
object
in the JMS channel is sometimes missing. I increased the weblogic server
thread
from 15 to 30. But still can't help. I also ugrade the client server
to use the
same sp8. But can't help. Some one mentions the sp9 can solve this problem.
It
is true? anyone have it for unix ? where can I download it? I can't
find it in
weblogic web site.
Kelvin

How to show multiple messages for a single exception

hi
Please consider this example application created using JDeveloper 11.1.1.3.0
at http://www.consideringred.com/files/oracle/2010/MultipleMessagesExceptionApp-v0.01.zip
It has a class extending DCErrorHandlerImpl configured as ErrorHandlerClass in DataBindings.cpx .
Running the page and entering a value starting with "err" will result in an exception being thrown and multiple messages shown.
See the screencast at http://screencast.com/t/zOmEOzP4jmQ
To get multiple messages for a single exception the MyDCErrorHandler class is implemented like
public class MyDCErrorHandler
extends DCErrorHandlerImpl
public MyDCErrorHandler()
 super(true);
@Override
public void reportException(DCBindingContainer pDCBindingContainer,
 Exception pException)
 if (pException instanceof JboException)
 Throwable vCause = pException.getCause();
 if (vCause instanceof MyMultiMessageException)
 reportMyMultiMessageException(pDCBindingContainer,
 (MyMultiMessageException)vCause);
 return;
 super.reportException(pDCBindingContainer, pException);
public void reportMyMultiMessageException(DCBindingContainer pDCBindingContainer,
 MyMultiMessageException pException)
 String vMessage = pException.getMessage();
 reportException(pDCBindingContainer, new Exception(vMessage));
 List<String> vMessages = pException.getMessages();
 for (String vOneMessage : vMessages)
 reportException(pDCBindingContainer, new Exception(vOneMessage));
}I wonder if calling reportException() multiple times is really the way to go here?
question:
- (q1) What would be the preferred use of the DCErrorHandlerImpl API to show multiple messages for a single exception?
many thanks
Jan Vervecken

fyi
Looks like using MultipleMessagesExceptionApp-v0.01.zip in JDeveloper 11.1.1.2.0 (11.1.1.2.36.55.36) results in a different behaviour compared to when used in JDeveloper 11.1.1.3.0 (11.1.1.3.37.56.60)
see http://www.consideringred.com/files/oracle/img/2010/MultipleMessages-111130versus111120.png
When using JDeveloper 11.1.1.2.0 each exception seems to result in two messages where there is only one message (as intended/expected) per exception when using JDeveloper 11.1.1.3.0 .
(Could be somehow related to the question in forum thread "multiple callbacks to DCErrorHandlerImpl".)
But, question (q1) remains and is still about JDeveloper 11.1.1.3.0 .
regards
Jan

Adobe Premiere Pro.exe and Dynamiclinkmanager.exe *32 not stopping after closing PP CS6.03

PP 6.03 will not restart after closing program. When I try to re-start nothing happens when clicking on the PP6 icon. Looked in task manager and found that Adobe Premiere Pro.exe and Dynamiclinkmanager.exe *32 are not stopping after closing program. Once I manually stop the processes PP will restart as normal. This is on Win 7 Sp1, HP Elitebook 8760W Matrox MXO2 LE. Also Audio meters are not active during capture, can't change clip name during capture.

Hello Elcuad, and Canino video,
Please verify the following steps and report back your findings:
- uninstall the currently installed MXO2 effects and drivers
- go to control panel - user accounts - and locate the account you are using, then drop down the UAC level all the way, ok and reboot
- download our 7.02 driver with Internet Explorer, followed by our effects
- after the files are downloaded, right click each file, go to properties, and confirm they are not blocked, if they are click the unblock button
- reinstall the Matrox driver, again, the one we just downloaded, followed by the effects, reboot
- go to start, all programs and locate the premiere icon, hold shift and ctrl keys down, and launch this particular icon, keeping the keys down until the application opens up
- please build a new project and try it out

Render engine does not stop after reaching 100%

It looks like to me that the render engine does not stop after reaching 100%. It does not affect the rendered file which is fine and complete
-the Pause and Stop buttons are displayed but have no effect on pausing or stoping the render
-when I want to quit SG, it locks up and have to Force Quit to get out of it.
I really like the program though and hope you are going to fine tune the UI and make it look like After Effect and Premiere.
I would encourage you to instaure round tripping between these two apps and SG.
It would be nice to have curves as well.
Thanks guys
Brice

Could you open the defaultTrace.X.trc files and check for the errors?
Good from my point of view is to make a search if those files for some stack traces with the string ".dsr."
Regards,
Aleksandar

My MacMini does not stop after giving the order ''switch off''.What can I do?

My MacMini does not stop after giving the order ''switch off''.
It stops only, after pushing the button ''on/off'' for some seconds.
What can I do?
frahsun

boot the Mac into safe mode, repair permissions while in it, then reboot normally.
if that doesn't help, try resetting the System Management Controller (SMC).

E7 Nokia Messaging not working after anna update

hi
nokia messaging not working after anna update. when i
-choose provider (hotmail/gmail/yahoo...etc)
-enter username & password
-click OK to T&C
-get error message: "cannot enable this service on the device"
any ideas?

I'm having a similar issue. It appears to only impact Hotmail accounts. For me though, this happened without updating the OS. The email client is simply failing to connect to the Hotmail interface. Only two possibilities, either Microsoft changed something on the email gateway or Nokia changed something on their end. Either way, it's not working and has been out of commission for the past week. If this is how corporate friends get along, I'd hate to see what happens in a adversarial relationship.

Multiple apps not working after iTunes 6 install

ITunes 6.0 and QuickTime 7.0.3 were installed by Automatic Software update. Since then multiple apps including Safari, Mail, and all Dashboard Clients. At first System Preferences was working but has since stopped. All seem to start up but stop after just a couple seconds with the message "The application XXX quit unexpectedly" I have run Disk Utilities Repair Disk Permissions and Repair Disk, from the hard drive and Install DVD. I can't find all the preference files (for Safari and Mail at least). What to do next?

I second this problem. Although I'm not sure what it relates to (if it's the download of iTunes 6.0, or something else), I too am experiencing problems with many different applications quitting unexpectedly. The problem was initially seen when I inserted a DVD to watch, and DVD Player quit. I thought that there might be some new software I could download (which there was... DVD player 4.6), so I downloaded the new software, but the installation application kept quitting. Also, "Software Update" quits unexpectedly, which I found when I tried up update to Mac OS X (10.4.2) from simple 10.4 using that application.
To Steven - sorry that I cannot offer any advice, but can only share with you in your question of What to do next.

Deleting multiple messages NOT IN SEQUENCE.....

Does anyone know how to delete multiple messages at once that are not in sequence (for example, email #1, 3, and 5)?

Unfortunatly, it's not possble on the BB.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Midi notes stop after half note

hey
i am making this song in which a midi cello is playing long notes. But when i go to record them, the notes stop making sound after half notes even if i am still holding the key. I have tried going in and editing them and placing them all by scratch in the matrix editor, but the sound stops before the bar has even finished scrolling over the note.
Please help..

Hi G,
check if you have midi information under that track, delete,
also check the even list to spot that info such note off
commands after the note.
See if your charing the same track or same midi track number.
Under midi trhu window (left) gate time if you have some percentage
take it off, I usually left mine at ( - )
Hope this helps you,
best regards,
Jorge

Message not processed after technical routing

Hi ,
I have a SOAP ->ABAP Proxy (R/3) scenario that sometimes not processed completely. When checking the message in SXMB_MONI I notice a grey dot (which means log version) in the status column next to the message, Upon opening the message I can't see any errors.
The message has gone through the following steps.
Inbound Message
Receiver Identification
Interface Determination
Message Branch According to Receiver List
Request Message Mapping
Technical Routing
But final stage call adapter not executed so i came to know that response message not reached to XI.
This is occuring once or twice for every 25 to 30 messages.
Can any one provide some suggestions to rectify the above issue.
Thanks & Regards,
Arun.

Check out the below things,
1. Check for which input data it is giving. (Any specific data).
2. This may happen becaus of time out. (Huge data processing)
Also check out below link,
['Log Version' status in 'SXMB_MONI']
Resend the message from sender and it will work properly.
Log version means "Waiting for response" and liable to fail if response not received on time.
Edited by: Siddhesh Pathak on May 13, 2009 12:10 PM

Capture Now does not stop after the limit is exceeded........

Hi,
I'm using FCP HD 4.5 on a DP500 G4, OS 10.3.9. I'm doing "capture Now" to get some VHS video into my machine. FCP will not stop the capture no matter how I set the time limit. This used to work, so what did I do??
Quite frustrating.
I've told FCP that I'm using a "non-controllable device" but the capture just keeps on going and going and going..........
Help......
Pete D.
dual 500 G4 Mac OS X (10.3.9)

When I tell it to stop it responds and stops just fine..... if it's been going for 10 minutes I have a 10 minute long file - even if the limit was 3 minutes......
What happens when you tell it to stop rather than
relying on the time limit?
x
Do your part in supporting your fellow users. If a
response has been Helpful to you or
Solved your question, please mark it as such
as an aid to other lost souls on the forum.
Also, don't forget to mark the thread Answered
when you get enough information to close the thread.

Inbox messages not visible after reading since Yosemite conversion

Since I upgraded to Yosemite on January 3rd, my Apple mail app is misbehaving. When I get new messages from gmail, they show up in the Inbox, Unread and Today mail folders but not in the overall Inbox folder. After they are read, they disappear from Inbox and Unread (of course) and are lost in the ether. If I search mail for a specific message, it finds it and indicates its either in an Important folder or in Inbox-Gmail but it is in neither. Otherwise the message doesn't show up in Mail at all. Also the mail remains on the gmail server when I access it directly on the web.
I've tried to synchronize the mail accounts but nothing changes.
I also turned on iCloud and iDrive at the same time.
A commentator responding to my question reports
Apple Mail is not displaying the Exchange or G-mail inbox properly. I tested this with 2 systems: 1 on Mavericks and 1 on Yosemite. The Mavericks mail worked correctly and the Yosemite would stop displaying the inbox. I was able to perform operations (read, flag, delete, move) messages on the Mavericks system and the actions would correctly show on the Yosemite system once I re-synced the mail application. Furthermore, I only needed to click on my iCloud-based account and then go back to my Exchange account for the inbox to be displayed properly. However, after about 30-45 seconds it would again stop displaying. I how this helps and that Apple can fix this annoying bug soon."

I can only see messages for my Exchange account if I'm looking at the "all Inboxes" in the left column. Otherwise all folders (and not just the Inbox) for my Exchange account has the problem. Once stuff is read, everything vanishes a few moments later.
It looks like Gmail and iCloud accounts also set up in Mail seem to be okay. It seems to be only my Exchange account.
I've been having to do email stuff on my iOS devices.

Messages not working after 10.9.2 upgrade - XPCIMDMessageStoreSendXPCMessage fails

I have upgraded five machines to 10.9.2, but one of them has run into a persistent problem with messages.
On startup, I get a Message that an internal error has ocurred and asks me to relaunch. After that the window comes up and the acount window shows me logged in, but the history is not updated and new messages take forever to deliver or do not go through at all. They usually do not update on the local display.
The console log shows lot of failures like these:
- 2/27/14 6:33:44.954 PM imagent[371]: [Warning] __XPCIMDMessageStoreSendXPCMessage failed too many times...bailing!
I have set up another account and tried logging in from it, but it shows the same behavior.
The firewall is off, certificate seem to be fine. When I log out and back in, the other systems devices get all the nag messages about the system and numbers being added, so it is communicating with the server. But messages are not coming through.
I have cleared all preferences and caches, but the behavior does not change.
I have reverted the system to 10.9 by installing over it. Messages immediately works fine (same preferences etc.) Everything works great, but I'd rather not live with the SSL bug.
I have upgraded using the Combo Update and another time using the App Store. The behavior stays the same.
The other four machines and my 4 iOS devices are all working as expected.
Does anybody have any ideas? My family and friends use Messages a lot, so I need it on my main machine.
Thanks,
-- Harald

Hi,
I will presume again then.
I would also try these one at a time. Doing it this way is less invasive than doing them altogether.
The Console Message looks more like it belongs to an iMessage sending than an AIM, Jabber or Yahoo ones.
In this case I would try deleting com.apple.imessages.bag.plist
This is not the Account info for iMessages but it is the server the app (and IMAgent) connect to.
If that does not work I would try the iMessages account one (com.apple.ids.service.com.apple.madrid.plist)
This is the one in use in Mavericks.
You may still have the Mountain Lion one present (com.apple.imservice.iMessage.plist)
You could try using Activity Monitor to Force Quit IMAgent but you first need to turn Off FaceTime even if it is not open (IMAgent does it's "Listening" as well as for the Messages app.
It goes without saying the Messages app should also be Quit.
I would again restart the computer when Quit the IMAgent app.
7:22 pm Saturday; March 1, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

ResetButton not working after exception

Hallo,
I've got resetButton which works fine when I open page with form and enter some values to it. It seems it doesn't work when I commit that form and catch exception after data validation.
<resetButton textAndAccessKey="${nls.RESET_BUTTON_LABEL_SPRAWYKLIAS}" formName="dataForm" rendered="${'true'==createMode}"/>
Any ideas, how to make it work?
Regards,
Kuba
Message was edited by:
jgradon

JTP51,
I recommend you start a new thread with the details of your problem.
It's very highly unlikely that you have the same issue, as you are using ADF Faces, which was released in 2006, the original post was in 2005.
John

BPM Multiple message not stopped after exception

Similar Messages

Maybe you are looking for