BPM - to post message N times (message split)
Hi,
If i want to post messages N times based on field input Value (N), which step do i need to use?
Thanks
If i want to post messages N times based on field input Value (N), which step do i need to use?
Depending on your requirement:
1) You have many occurences of a node and according to those you want to post your message:
Use a Block step in BPM with mode as ForEach, for more info read this: /people/milan.thaker/blog/2008/08/05/modes-in-block-step-of-bpm
Also read this help section for more understanding:
http://help.sap.com/saphelp_nw70/helpdata/EN/11/13283fd0ca8443e10000000a114084/frameset.htm
2) If your requirement is to post a message to some receiver based on a value in input then you can do so by giving the condition in receiver determination.
Regards,
Abhishek.
Similar Messages
-
Special G/L posting to one-time account is not defined Message no. F5265
hi,
Special G/L posting to one-time account is not defined
Message no. F5265
the above message is displaying when tried to post for one time customer.
where to check this in configuration level. what are the tcodes , please let me know.
actually i am abaper, dont know much abt fi configuration..
regards,
Hari priyaDear H Priya,
u r posting to one time Customer
in that there is no need of special G/L indicater. (it means special G/L - down payment)
if the customer is one time how can u take the down payment from the customer.
if any quaries plz...........
Regards
radha -
Warning Message at time posting Invoice for Advance Payment alrady made
Dear Sir,
I want to get a Warning Message at time posting Invoice for Advance Payment alrady made. Please tell me the cofigaration.
Regards,
DavidDear David,
I think You're referring to the following Information message:
xxxxxxxx,xx EUR Down payment exist
Message no. F5096
Diagnosis
On the account, special G/L transactions exist which, if necessary, are
to be cleared with the posting you are currently entering. The special
G/L transactions which initialize this note were defined in the default
settings.
System Response
You receive this note.
Please kindly run OBA5, insert the Applicational area F5 You can see that You can have only a Note in footer, a note in window or switch off the message:for information message 096.
Therefore You cannot have a Warning message W.
Mauri -
BPM multicast Order to multiple line messages via HTTP.
Hi
I have an interface that requires a Sales Order to be split up into messages per Order line. So a 1:N. Each message is then to be sent via HTTP.
I find that the HTTP Adapter is not able to handle a multi message as it returns error "Messages in multi-message format can only be sent to one Adapter Engine".
So a BPM is required to process each message and send them one at a time. My test SalesOrder has 2 lines and so I expect 2 messages to be sent. I have a BPM but it is only sending the first message and it should do both.
My BPM has the following steps
Receive Step for SalesOrder
Transformation Step for SalesOrder into OrderLinesMessage
ReceiverDetermination Step for OrderLinesMessage to Receivers container
ForEach block for Multiline element (Receivers) to CurrentLine (ReceiverLine container)
Send Step for OrderLinesMessage where ReceiverFrom = ReceiverList and Receivers = ReceiverLine container
Why for my SalesOrder with 2 lines is only 1 message being sent ?.
thanksHi
I have an interface that requires a Sales Order to be split up into messages per Order line. So a 1:N. Each message is then to be sent via HTTP.
I find that the HTTP Adapter is not able to handle a multi message as it returns error "Messages in multi-message format can only be sent to one Adapter Engine".
So a BPM is required to process each message and send them one at a time. My test SalesOrder has 2 lines and so I expect 2 messages to be sent. I have a BPM but it is only sending the first message and it should do both.
My BPM has the following steps
Receive Step for SalesOrder
Transformation Step for SalesOrder into OrderLinesMessage
ReceiverDetermination Step for OrderLinesMessage to Receivers container
ForEach block for Multiline element (Receivers) to CurrentLine (ReceiverLine container)
Send Step for OrderLinesMessage where ReceiverFrom = ReceiverList and Receivers = ReceiverLine container
Why for my SalesOrder with 2 lines is only 1 message being sent ?.
thanks -
Split one message to many messages and then put the same webSphere MQ.
Hi All,
In the project, I encountered a problem. I had a message with many sid element. I needed to split the message to many message by sid element. and then put those message in the same webSphere MQ queue in turn. Do any one encountered the question?/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible - follow this blog to do a multi mapping (1:N)
-
Same message many times to xi system
Hi all,
i want to send same message many times to the xi system,couid anyone give me idea using any adapter and using BPM and without using bpm also..
regards
ptraoHi Krishna,
Let's take an example..you are sending the file to the xi...you are placing the file in the source directory...you have the option in the sender communican channel if you do no tselect the delete option from the processing mode.The XI will keep on the poll the message according to the time interval which you mentioned in the sender adapter ( file) poll interval.
For more information you can refere the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/ae/d03341771b4c0de10000000a1550b0/frameset.htm
Hope i am clear.
Thanks and Regards,
Chandu. -
I just downloaded the program to a new laptop. I "repaired, uninstalled, installed" and am still getting the error.
Adobe Acrobat Pro AcademicMS Word (MS Office 10) Acrobat > File > Create PDF from File
Embrace what today offers,Helen Catrece Nosal
"The grand essentials to happiness in this life are something to do, something to love, and something to hope for" ...Joseph Addison
From: TanviRastogi <[email protected]>
To: stephen nosal <[email protected]>
Sent: Saturday, April 25, 2015 12:01 PM
Subject: Receiving error message every time I try to create a pdf. "An unexpected error occurred. Unable to create .pdf"
Receiving error message every time I try to create a pdf. "An unexpected error occurred. Unable to create .pdf"
created by TanviRastogi in Creating, Editing & Exporting PDFs - View the full discussionHi Can you please tell Acrobat version you are using, i.e, Acrobat X or Acrobat XI or Acrobat Pro DC? Also how are you trying to create PDF like from within Acrobat > File > Create PDF from File or from some Browser or from Office? Which type of file are you trying to convert - PowerPoint or Word or Excel or html file ? ThanksTanvi If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7479679#7479679 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7479679#7479679 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
on the zynga game, mafia wars, every time i click on something within the game a get a popup that says "Requested URL not found: 400" all pages load fine it just gives the message every time i click something, how can i stop this?
Sorry, the above thread should have been a "new" post, not a reply post.
-
While doing puchout user is getting Overlapping time message in OTL Time entry responsibility
while doing puchout user is getting Overlapping time message in OTL Time entry responsibility
XmlBeans, at least the version I'm working with now, doesn't support version 3 of the Document Object Model (DOM). I don't know what operations were introduced in DOM 3, but I guess you're trying to use one of them. What worked for me is to copy the Document into a DocumentBuilder that does support DOM 3, such as the JDK's own builder, and work with the copy. This should be all right if the document is not too large. The following URL has the details:
http://issues.apache.org/jira/browse/XMLBEANS-100
(Look for the post dated 22/Aug/08, which as I write this is the very last post.) -
Ever since I installed Mountain Lion from Snow Leopard, I cannot retrieve my deleted Apple mail messages from Time Machine. I could do it in the past using Snow Leopard. The effective date for the the non-retrival of deleted messages is the date I installed Mountain Lion from Snow Leopard. Any thoughts?
Keith Montreal wrote:
It was origionally a local folder for things like receipts from the Apple Store, etc
I'm still not sure what you mean . . . is it listed in the "On My Mac" section in Mail's sidebar, like these?
Mountain Lion appears to have given it an icon very much like an Archive box and put the "on My Mac" folder within that "Box" on both the back ups and the new Mail program - in fact it did it 6 times, which was the origional problem.
Can you post a screenshot?
I could restore inbox messages although they came in as a new mail box called Time Machine rather than into their origional mailboxes (there are 7 different addresses)
Yes, that's how Time Machine restores Mail messages, so it doesn't erase the current contents of an existing mailbox. You can then move them into the desired location. -
I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Specifying message delivery time for a JMS queue
Guys,
Can anyone tell me as to if it possible to specify message delivery from a JMS
queue to a listening MDB at a specified interval in weblogic . I mean I need
to post messages to the JMS queue but I need the messages to be delivered to the
MDB's after lets say 30 seconds .
How can I do it using the weblogic console ?? Which property do i need to change
Please advise.
Thanks
Kar
Hi,
Message delivery time can be set programmatically,
or through a console override. In your case, set it via
the console with the value "30000".
This feature has been available since 6.1, and is a
JMS extension.
Here is the link to the 8.1 documentation:
http://edocs.bea.com/wls/docs81/jms/implement.html#1235262
And for a full list of WL JMS features, see here:
http://edocs.bea.com/wls/docs81/jms/intro.html#jms_features
Tom
kar piyush wrote:
> Guys,
>
> Can anyone tell me as to if it possible to specify message delivery from a JMS
> queue to a listening MDB at a specified interval in weblogic . I mean I need
> to post messages to the JMS queue but I need the messages to be delivered to the
> MDB's after lets say 30 seconds .
>
> How can I do it using the weblogic console ?? Which property do i need to change
> ?
>
> Please advise.
>
> Thanks
>
> Kar
>
>
-
Suppress Finder's "Cant Find Network Volume" Message @ Login Time
I manage 200 Mac desktops and laptops - all running Leopard. I manage the Macs with Open Directory via MCX policies using Workgroup Manager. One of the main things I manage for my users is Login Items. For example, various SMB network volumes get mounted at login time. When a Mac user is on the LAN and able to access the domain and file servers, the SMB volumes get mounted "automatically" via MCX computer and group policies. The mounts are mounted in /Volumes and appear on the user's Desktop. This is great for desktop users with static Ethernet connections, but for laptop user this poses a major problem which could easily be "fixed' by Apple. Let me explain:
When mobile users (laptop users) are off the LAN (i.e.; they are on the road, working from home, etc) the Mac attempts to find the SMB network volumes that are read part of the locally cached MCX policies when the user(s) log in. Of course, since the user isn't on the LAN (or connected via VPN,etc) Finder throws a generic error "The network volume could not be found"). This message is easily dismissed,and isnt a big deal if it only pops up once, but my users have SEVERAL SMB mounts configured as login items, and thus my users get prompted with the aforementioned Finder error messages several times. Each message stacks up top of the other as each connection attempt times out. Ouch! This has become the #1 complaint my Mac users have and it has reached the ears of senior IT managers and directors. Keep in mind most of my laptop users travel the planet on lecture tours and are on the road for weeks at a time, and thus they deal with the Finder messages several times a day for weeks on end (and sometimes in front of an audience if the said laptop is connected to a projector for a Keynote/PowerPoint presentation etc). The message provides no useful info. My users are savvy enough to know the auto-mounted network shares aren't available - they dont need "help" from Finder.app. They want to log in and get to work, and not be bothered by the barrage of redundant errors from Finder for 10 minutes!
I have attempted to design an AppleScript that could "intercept" the Finder messages and dismiss them automatically, but it hasnt worked thus far. I have also researched autofs and other Apple technologies to figure out a way to avoid these errors. No luck.
Request:
I would like to request a way to set the preference to have these messages ignored/bypassed or disabled. A simple check box to avoid these messages is all I want.
I submitted a bug report to Apple requesting a "fix" (ticket 6172962).Two suggestions. 1) post AppleScript queries to its forum under OS X Technologies. 2) post server queries to the appropriate server forum.
-
Message expiry time in JavaMessageQueueSeries 3.5 SP1
Hi,
We are using JavaMessageQueueSeries 3.5 SP1. In durable subscribers(Topic), is there anyway to set the messages expiration time. As of now the messages are there in all along. If it is not consumed by any of the consumers. Everytime we are removing manually.
Please give the idea how to set message expiration time.
thanks.hi Jacques
Two proposals :
One based on the generated TRFN and the other Newly built.
So try to somehow copy the flow in 3.X format in your BW7 system and genereted the transformation to see if the mapping is properly reflected.
Otherwise create the flow from scratch and try to build the conversion according to what you can read/see in the post above there is a link to the help.sap saying the time conversion is done automatically.
if you do not succeed then have a closer look to notes
Note 1458197 - Time distribution for InfoSource with key: Gen. error
and
Note 1052648 - Migrating transfer rules and update rules for BW7.x
it seems that time distribution with reference to the factory calendar is currently not supported in the transformation. (see last paragraph)
If that does not work in your place i would recommend if the conversion to factory calendar is really needed to let this specific flow in 3.x till SAP provides solution meanwhile open a message with SAP to see the outcomes.
hope this could help you out in solving your issue.
Boujema -
Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.
Maybe you are looking for
-
Help
-
Where to find javac RPMS for RedHat Linux7.3
I want to do programming in java on linux platform but I don't know how to start. I have Redhat Linux 7.3 installed on my computer. I have Celeron 1.2Ghz processor with intel chipset board. I searched for RPMS of Java compiler on various sites but as
-
We have the industry solution for utility (IS-U or CCS). We are looking at implementing meters with radio frequency id's (the business people tell me these are sometimes called ERT ID's). Each register on a single device could have it's own radio fre
-
BT Infinity installation CD cannot connect to BT H...
I finally got my Windows XP activated on my laptop after finding my lost product key code. Up until now, I've been using Ubuntu 10 (Linux). So I inserted my BT Infinity "Is your broadband light blue?" - I clicked 'Yes'. Then it searched for 'availabl
-
Is going from FICO to SEM worth? how is market for SEM
I am currently working SAP FICO module. Wanna go for SEM module? Is it worth goin for? How is the job market for SEM. I am currently in a dilemma. So please help