BSOD 10 Seconds after LAN Plugged In - e22w8x64.sys - GE70 2OE

So I had a random BSOD on my GE70 2OE while playing a game today, IRQL NOT LESS OR EQUAL e22w8x64.sys. Ever since I have crashed withing a few seconds of plugging in to my LAN, or of booting if LAN is in at boot.
Additionally wireless works on boot, but slows down to unusable speeds within minutes.
I have tried all the fixed I could find on here or Google. Latest drivers from MSI, also tried the latest right from Qualcomm, disable the services in msconfig and startup.
I am at my wits end as I had other BSOD issues as a result today too, not MSI software but all stemming from the same initial MSI/Qualcomm BSOD. Anyway I have solved all of them except this last bit, but am just so burned and stressed out at this point I am just lost.
Anything to grab onto would be great!

Success!
I followed the stickied instructions with a good nights sleep and a fresh cup of coffee figuring it can't hurt to try again, and it worked! The only other thing I did was turn off my Windows Driver Verifier functionality which I had been using to troubleshoot my other BSODs as flipping my WiFi off was triggering it (presumably from having no LAN driver?). Maybe had something to do with it? Probably something I should look into more but for now I need to be productive.

Similar Messages

  • Can't make LOM working more than 20 seconds after startup

    Hi.
    This bottle in the sea because I don't succeed to make LOM working.
    The story is the following.
    I have 5 Xserve Intel involved in a Xsan installation. Port 1 is used for public LAN, port 2 for private LAN, as usual.
    I've configured the LOM settings for port 1 locally with Server Monitor with another IP in the public LAN.
    Then I've added the Xserve in the Server Monitor of an iMac used for the administration of the SAN.
    The messages I get are a waiting for an answer of the Xserve or the fact that the information have not been updated... for a long time. All the Xserve present the same problem. At this moment, it's not possible to ping the LOM Port 1.
    If I add the server locally in its own Server Monitor with its LOM IP, it doesn't work either but if I try "127.0.0.1", I get the hardware informations as expected.
    I've tried to shutdown a Xserve, unplug the power cords, wait one minute, plug the power cords, start it but it doesn't fix the problem. Perhaps I should have unplug the other cables ?
    Finally, I've noticed that :
    - when the Xserve is shut down, I can ping the LOM Port 1
    - during the start up of the Xserve, the iMac gets its hardware informations for a couple of seconds
    - at the moment when the login window is visible in ARD, the LOM Port 1 is no longer ping-able
    - the Server Monitor on the iMac says that the connection with the Xserve has been lost.
    That is to say that the iMac receives the hardware informations of the Xserve during 20 seconds after their startup, not more
    I've tried to use the command sudo IPMITool lan print 1 and it seems that the configuration is correct.
    I have also another problem with Server Monitor. If I try locally (with the 127.0.0.1 address) to edit notifications, I don't succeed to complete the "To" field whereas I can comlete the "From" field. Is there a known problem with the GUI here or do I have to change my glasses ?
    Any idea is welcome now ! I'm lost.
    All the best.

    Hi.
    I've investigated the problem. It's simple but I 've found no solution at the moment.
    The problem appears when the Xserve is connected to the Cisco Catalyst 3750G switch, can't be reproduced when the Xserve is in direct attachement with my Mac.
    All the ports of this switch have been set to "Desktop" with the Web interface (after Express Setup) and the negociation (speed/duplex) is auto by default.
    When the Ethernet negociation setting on the Xserve is "Automatic", the Xserve doesn't fully boot. When it is started, you have to unplug and plug the Ethernet cable so the startup is completed. Very strange.
    When the Ethernet negociation setting on the Xserve is manually fixed to 1000-FD, the Xserve starts up without problem. When the Xserve is stopped, the LOM Port in pingable. When it starts a little, the LOM Port is still pingable but at the moment I think the manual setting is applied, the LOM Port is no longer pingable. This is the key of the problem.
    So I tried to fix the speed/duplex in the switch and leave the Xserve on "Automatic". The story is the same: the LOM Port is desactivated after a few seconds of startup.
    When the Xserve is on "Automatic" and plugged directly to my Mac, the problem doesn't exist.
    The problem does not exist with the Mac Pro leaved on "Automatic".
    So the problem is between the Xserve Intel and the Cisco Switch. Perhaps something to do with its settings but I do not speak "Cisco" regularly
    The Cisco has product ID WS-C3750G-48TS and the Software is 12.2(25)SEE3.
    I made the same test with the "private" Cisco switch product ID WS-C3750G-24T and the problem is the same.
    For the moment, I leave the Xserve with the speed/duplex fixed because I prefer that the machines boot, rather than being able to consult LOM remotely when they are hanged (it works locally on 127.0.0.1 on each Xserve started).
    Next step would be to play with setting the spanning tree "portfast" on the Cisco ; if it lets the Xserve to be set on "Automatic", perhaps it will solve the LOM problem and by the way the edit notification problem.
    All the best !

  • Headphones no longer work after being plugged into speaker

    Hi i purchased a ipod touch 5th generation 32 gb bundle from target just over a week ago which came with the iCoustic 20 in 1 Accessory kit Model No : IC184. After plugging the ipod into the supplied speaker this morning trying to listen to music it kept making stacic like noises and changing volume it was alwful to try and listen so gave up and went back to taking it off speaker and playing it back through apple headphones but now after being plugged into the speaker the headphones wont work its just a buzzing sound if you turn the volume up all the way loud the music will come back through headphones then when turning it down it cuts out again or if you manage to get the music it will stop after a couple of seconds. I have done a factory reset but it has made no difference.Please help have a very upset daughter it is frustrating do we take this back for a refund and get a new one if so how do we keep the music and photos etc she has on this one? Thankyou.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Check also Settings > General > Accessibility > Hearing. Make sure that the sound balance is not set all the way to "R".
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.

  • Trackpad doesn't work for 5 seconds after any USB device is connected

    This is really irritating. I could plug in any USB device - a hard drive or iPhone, and the trackpad will not work for about seconds of trying to get the pointer to move around the screen. Normally there's nothing connected to the Mac, so when something is plugged in, even if I just plug something in and walk away from it and come back some time later, if I try to move the trackpad, nothing will happen for about 5 seconds after trying to move the mouse pointer. Very strange.
    Any idea what's going on?

    Seems like a strange problem. You could try putting dbus earlier in the list, second after syslog-ng is where I used to have it. Moving to systemd might fix it too.

  • My apple mobile device stops a few seconds after i start it up and my ipod touch cant connect becuz of this!!?

    I have an Windows 7 desktop computer and when I try to connect my Ipod touch (4th generation ) to itunes it says apple mobile device is not started soo i go to services and start it up but a few seconds after i start it it stops i have tried everything.. reinstalling the new itunes deleting bonjour quick time everything that i found on goggle that might fix it soo and everything it said on the trouble shooting tips but it still wont work! I need help!
    Pls help me, My ipod touch is version 4.3.3 and itunes 10.4. I have tried to connect it with another pc or laptop and it works good and sync but I need it work on the main computer where all my files and stuff is at.

    When I turn on my ipod or I plug it in the apple logo appears for a few seconds and then the screen flashes white, soon after the "use itunes to restore" message appears but when I plug it in to my laptop the device isn't recognised on itunes

  • I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.

    I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.

    Thank you for responding.  I decided to upgrade to Acrobat 11 and it is now working fine.
    There was no error message - the documents just closed. J.R. Ledbetter, CPL
    5614 Turfwood Lane
    Houston, TX 77088
    Tel. 832/657-7027
    email [email protected]
          From: Anubha Goel <[email protected]>
    To: J. R. Ledbetter <[email protected]>
    Sent: Thursday, March 5, 2015 8:12 PM
    Subject:  I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.
    I removed and reinstalled Acrobat Pro 10 and now my documents automatically close about 7-8 seconds after I open them.
    created by Anubha Goel in Acrobat Installation & Update Issues - View the full discussionHi jr_ledbetter, Could you please let me know if you get any specific error message when the PDF closes automatically.Does Acrobat opens as itself or not?You might need to refer the KB doc link mentioned below:Doesn't launch after 30 days
    Installed as part of a CS6 suite Let me know if this helps. Regards,Anubha If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7258293#7258293 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7258293#7258293 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • My flash player continues to buffer every few seconds after it starts

    My flash player continues to buffer every few seconds after it starts, it plays then buffers, plays then buffers. It worked just fine up until a few months ago. I’m not sure what changed. I am running windows vista. I checked the add-ons and the flash player is enabled. I tried turning off the popup blocker. I just downloaded the latest version and no change.
    Please help Thank you!

    This is the run without permision list. I wish I knew how to get rid of some of this stuff . Just talked to a friend of mine that has the same problem. I also just ran a speed test on youtube and it shows that streaming HTTP is running at an average of less than 100 kbps.
    Microsoft Office Template and Media ControlVersion   12.0.6211.0 QuickTime ObjectVersion  QuickTime 7.5 (861)/ STSUpld UploadCtl ClassVersion  12.0.4518.1014 /InformationCardSigninHelper Class  Version   8.00.6001.18702 /XML DOM DocumentVersion  8.100.4001.0 /XSL Template Version       8.100.4001.0 /HtmlDlgSafeHelper Class Version  8.00.6001.18702 /Tabular Data Control Version       8.00.6001.18702 /XML Schema Cache Version 8.100.4001.0/ SharePoint Spreadsheet Launcher Version       12.0.6211.1000 /QuickTime Object Version   QuickTime 7.5 (861)/ SharePoint Export Database Launcher Version   12.0.6211.1000 /Microsoft Shell UI Helper Version   8.00.6001.18702/ Microsoft Office List 12.0 Version  /   12.0.6211.1000 Windows Media Player Version   11.0.6001.7008/ Windows Media Services DRM Storage object Version   11.0.6001.7000 /XML DOM Document 4.0 Version   /  4.20.9876.0 Free Threaded XML DOM Document 4.0 Version  4.20.9876.0 /XML Schema Cache 4.0 Version 4.20.9876.0 /XSL Template 4.0 Version   4.20.9876.0 /XML Data Source Object 4.0 Version   4.20.9876.0/ XML HTTP 4.0 Version   4.20.9876.0/ XML DOM Document 6.0 Version  6.20.4001.0 /Free Threaded XML DOM Document 6.0 Version 6.20.4001.0 /XML Schema Cache 6.0 Version  6.20.4001.0 /XSL Template 6.0 Version   6.20.4001.0 / XML HTTP 6.0 Version  6.20.4001.0/ Java Plug-in 1.6.0 Version  1.6.0.0 /Registration Control Version   6.0.6001.18000/ SharePoint OpenDocuments Class Version       12.0.6211.1000 /SharePoint OpenDocuments Class Version  12.0.6211.1000/ RMGetLicense Class Version   11.0.6001.7000 / OWSClientEventSubscription Class Version 12.0.6211.1000/ OWSClientMiscApis Class Version   12.0.6211.1000 /OWSClientCommentThread Class Version       12.0.6211.1000/ OWSClientComment Class Version  12.0.6211.1000 /OWSBrowserUI Class  Version       12.0.6211.1000 /  Discuss /OWS Post Data Version 12.0.6211.1000/ SharePoint Spreadsheet Launcher Version  12.0.6211.1000/ Web Discussions Version  12.0.6211.1000 /Web Discussions Version       12.0.6211.1000 /Web Discussions Version 12.0.6211.1000 / OWSDiscussionServers Class Version       12.0.6211.1000 / OWSClientCollaboration Class Version  12.0.6211.1000 /OSE.Discussion  Version       12.0.6211.1000 / OSE.Discussions  Version  12.0.6211.1000 /OSE.DiscussionServer Version       12.0.6211.1000 / OSE.DiscussionServers Version  12.0.6211.1000/ OSE Global Class Version       12.0.6211.1000/ OWSDiscussionBar Class  Version  12.0.6211.1000/ SharePoint OpenDocuments Class Version  12.0.6211.1000 /SharePoint Stssync Handler Version 12.0.6211.1000 /SharePoint Stssync Handler Version  12.0.6211.1000 /Microsoft Office 12 Authorization Control Version 12.0.4518.1014 / Java Plug-in 1.6.0 Version  1.6.0.0/ Java Plug-in 1.6.0/ Version   6.0.0.104/Java Plug-in 1.6.0 /Version       6.0.0.104 /Behavior Object Version   / QuickTime 7.5 (861) /STSUpld CopyCtl Class Version       12.0.4518.1014/ iTunesDetector Class Version  2. 0. 0. 1/ OISClientLauncher Class Version       12.0.4518.1014 /PersonalSite Class Version  12.0.6212.1000 /Scripting.Dictionary Version  5.7.0.6000 /XML DOM Document 3.0 Version   8.100.4001.0 /Free Threaded XML DOM Document 3.0 Version       8.100.4001.0 /XML Schema Cache 3.0 Version 8.100.4001.0 /XML HTTP 3.0 Version   8.100.4001.0 / XSL Template 3.0 Version    8.100.4001.0 /XML Data Source Object 3.0 Version  8.100.4001.0/ Free Threaded XML DOM Document Version  8.100.4001.0 /XML Data Source Object Version   8.100.4001.0 /Google Update Plugin Version 1.2.183.23/ SSVHelper Class Version  6.0.0.104

  • My ipad2 keeps crashing a few seconds after it is switched on ?

    Can somebody PLEASE tell me how to fix this problem...
    My ipad 2 keeps crashing a few seconds after it is switched on....
    this happened after i downloaded and installed the latest IOS 7.0.4 from APPLE
    what is going on ??
    I read that quite a few people have experienced the same problem....
    Is there a cure ?? If so how ???
    Many Thanks

    Is it possible the battery is getting low? Try this procedure.
    Plug your iPad into the original charger & block in a wall outlet and leave it alone for a couple of hours. Then, while it is still plugged in, restart it by holding down the home button and the power button for 10-15 seconds until you see the Apple, then let go.

  • My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off.  How do I fix this?

    My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off.  How do I fix this?

    Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
    Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
    Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
    Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
    If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
    i

  • After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?

    After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
    THis also happened with my old iphone 4s
    I need help!

    Hi loist,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jeremy

  • I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal. I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model)

    Hello,
    I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
    I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
    I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?

    Some things you can try.
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

  • IPhoto keeps shutting down a few seconds after I open it. What is wrong?

    My iPhoto shuts down a few seconds after I open it. It sys there's problems to repair, then it repairs the problen, then a few seconds later it shuts down. What can I do?

    Post the first 50 lines only of the crash report
    Regards
    TD

  • Reader XI freezes 2-3 seconds after I open it, every time!

    This problem started when I downloaded reader XI.  It didn't happen in reader 9, or whatever the previous version was on my computer.  The little timer on the right moves clockwise 2-3 clicks and then it freezes.  About 20 seconds after being frozen, it closes.  Same thing happens when I try to open a pdf.  No error messages or anything.  I'm running windows 7 on a dell latitude E5530 (laptop).  No idea what's going on.  Here's a screenshot.  Help please.  Go easy please.  I'm not super smart when it comes to computer jargon.

    You can try using Windows Explorer to navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement

  • My safari keeps closing 5 seconds after i open it, what should i do?

    My safari keeps closing about 5 seconds after i open it and i have already reported it but i really need it right now, what can i do?

    Copy and paste the crash report in your reply. The entire report.

  • Email icon and function disappears 3 seconds after opening a PDF in Acrobat 8.

    Using Adobe Acrobat 8 with updates applied, when opening .pdf files the email function disappears 3 seconds after the file opens.  I have had this program in my PC for years, and this functionality worked up until last week when it disappeared.
    I have been informed that this program is no longer supported by telephone, and that I need to upgrade to gain access to support.
    I have reinstalled the program and the problem persists.
    Any suggestions would be appreciated.

    Hi Jason,
    I would recommend you to do a selected startup and then enable the programs one by one to isolate which program might be causing this.
    Please refer the KB: Restart Windows in a modified mode | Windows 7, Vista for selective startup of Windows.
    Regards,
    Anoop

Maybe you are looking for