BSP URL Logon Parameters

Hi All,
I have a BSP application (WAS 640) that I need to logon to by supplying sap-user & sap-password parameters. I did that mupltiple times for other applications, however, this time the application still shows the NT logon prompt. The strange thing is that it actually populates the NT prompt's user and password so all I have to do is click OK.
I was wondering if it's possible to completely by-pass the NT prompt to minimize the number of clicks.
Thanks,
Roman

No, the option "Logon Required" is not checked. I notice that some BSPs allow the user to login by supplying URL parameters, and other don't. Is there any programming involved to have this functionality?
I compared the ICF service for my application with the one that allows this, and they look identical.
Any ideas?
Thanks!

Similar Messages

  • Documentation of SAP default BSP url parameters

    Hi,
    I'm looking for a documentation on the SAP default BSP url parameters like
    - sap-syscmd
    - sap-sessioncmd
    - sap-params
    I already used some of them but am not quite sure whether there aren't any more to help me solving tricky problems.
    Is there any list of all parameters including their meaning and examples for usage?
    Thanks & regards
    Wolfgang

    I don't think you have listed the commands for sap-syscmd.  These look like the ones for sap-sessioncmd. 
    The following was taken from page 94 of <i>Advanced BSP Programming</i>:
    <b>SAP-SYSCMD</b>: The only value supported is nocookie.  This tells the BSP runtime to mangle the session ID into the URL and not use a cookie for handling the session id.  This is especially required when the same stateful application must be run multiple times in situations where session ids in coookies would have resulted in all applications mapping ont the same session.
    <b>SAP-SESSIONCMD</b>: The parameter sends actions to the session managemer:
    <b>open</b> - starts a new session
    <b>close</b> or <b>logoff</b> - ends the current application and redirects the browser to the URL supplied by the parameter SAP-EXITURL.
    <b>cancel</b> - is similar to close, but already handled by ICM.
    <b>usr_abort</b> and <b>usr_close</b> - is used by the portal to control BSP sessions. 
    It is interesting that the posting by Guillaume Garcia matches the text from the BSP book exactly.  I referenced my source, did you?

  • BSP URL parameters

    Hello,
      I have BSP developed with MVC paradigm. I show multiple tables in BSP page which is something like report output. I have event for line select on each table.
      My problem is, when user select any line, the BSP URL becomes extensive long and it get appending with all values of selection like event, event id etc.
      Is there any way I can control this. I want URL should not change after any event. I know Java Script has option / solution for it but I don't know how to.
    I appreciate yr help.
    Thanks
    Aj

    Hi,
    Explicitely adding the POST method to forms will prevent adding the values in your URL. Check http://www.htmlcodetutorial.com/forms/_FORM_METHOD_POST.html for details.
    Eddy
    Pimp up the S(D)N site and earn points. Check this <a href="/people/eddy.declercq/blog/2007/02/01/pimp-up-the-jam log</a> for details

  • Session id in BSP Url

    Hi
    I am creating a new iView of type BSP. On executing/previewing the iView the url is generated similar to:
    http://<hostname>:<port>//sap(bD1lbiZjPTEwMCZkPW1pbiZpPTEmcz1TSUQlM2FBTk9OJTNhZHYxZDIxX0QyMV8yMSUzYU5pOXBPcGVTbE9HTVk0ZWdfcU1jUnVkYU04MU5WUUdCTDhrai10cGMtQVRU)/bc/bsp/sap/<application>/<start page>.htm
    Although the BSP url is
    http://<hostname>:<port>//sap
    (bD1lbiZjPTEwMCZkPW1pbg==)/bc/bsp/sap/<application>/<start page>.htm
    So the session parameters generated in the two URLs is different and the latter one works fine but the earlier one gives some issue when trying to save etc and does not work as expected.
    I analysed the session parameters in the URLs and found that the former URL:
    (l)anguage en
    (c)lient 100
    (d)omainRelax min
    (i)info 1
    (s)ession-id SID:ANON:dv1d21_D21_21:Ni9pOpeSlOGMY4eg_qMcRudaM81NVQGBL8kj-tpc-ATT
    and the latter:
    (l)anguage en
    (c)lient 100
    (d)omainRelax min
    Is there any way this parameter be controlled from portal end so that I am able to get the BSP url (latter).
    Appreciate any pointers.
    Thanks,
    Priyanka

    Hi, it is not possible to diasable the url mangling you mentioned. You can call the static method
    cl_o2_helper=>generate_url_for_page to get an url for a specific page.
    Best regards,
    Stefan

  • How to launch a non bsp url through transaction launcher

    Hi All,
    i am not able to launch a non bsp url from transaction launcher. i have followed all the steps needed.
    Defined URL as non bsp url and defined the logical system and assigned it to rfc destination.
    when i test this out, i am getting a blank page.
    Any pointers on this will be helpful.
    Thanks,
    Udaya

    I am trying to launch sap/bc/bsp/sap/ytest2/index.htm without giving the initial server details. for the server details, i have mapped to logical system.
    i am assuming that this will pick the server info http://dmsap650.fm.test.com:8006/.

  • IC webclient url with parameters

    Hi all,
    Can I call IC webclient url with Parameters from another SAP system?
    Thanks and Regards,
    Smruti

    Hi Smruit,
    Check out this link that explains the options for opening the IC webclient.  It gives you teh URL parameters
    http://help.sap.com/saphelp_crm50/helpdata/en/84/11939c402646a080a44521c79a66f1/content.htm
    Cheers
    Andrew

  • Please help me in resolving the URL with parameters.

    Hello,
    Please help me in resolving the URL with parameters. If desformat is pdf, a pop up message �Acrobat Reader could not open �pa034922.fdf� because it is either not a supported file type or because the file has been corrupted���.
    if desformat is html or xml, the following URL is working.
    our requirement, report should be in pdf format.
    http://servername:7778/dev60cgi/rwcgi60?server=Rep60_mclaren&&userid=bizsystest/test@business&destype=cache&desformat=pdf&report=salary_dept.rdf&p_dept_list=''ABE','ASE','CE','CHE','CS','DE','DIAL','ECE','ERC','IE','ME','PTE','ARC','ASE1''&p_status_list=''ACP','AD','AP','ATP','D','FE','HD','INS','P','RP','S','TF','TP','TS','ST','GS','O''&p_sex=''M','F''&p_order_by='Name'&p_totals='NO'
    Thanks in advance,
    Usha

    We've seen this bug on machines running IE6 with a certain security patch (I forget its number). There's a thread in the Metalink reports forum about it. It appears to be somewhat tied to another problem where IE runs the report twice (you can see that in Showjobs. You're seeing the problem in 6i; I believe it persists in 9i.
    The workarounds are (1) set Acrobat so it doesn't open within IE or (2) switch to a different browser, like Netscape. For workaround 1, Start Acrobat Reader, Choose File -> Preferences -> General, Uncheck Web Browser Integration
    There's some evidence that it occurs more often with urls that include single quote characters. I think it's worse with XP, but I don't have any proof.
    If you check Adobe's site, you will see this isn't just an Oracle Reports problem. I think we're waiting for Microsoft on this one, so don't hold your breath for a quick fix.
    -- jim

  • Opening a url  with parameters in an application

    I'm able to open a url in a browser from my application, but I want to open a url with parameters.
    for instanse http://mypage.asp?parameter=a
    You get a file not found. Is this possible?
    I'm currently using
    Runtime.getRuntime().exec( "cmd /C start " + url);

    Found the answer -- you have to put the url in quotes lest the ampersands parse the end off.

  • How to use URL iview parameters??

    Hi all,
    i have created a URL iview  to www.gmail.com, now my requirement is i dont want to give user id and password and it should logged me in directly so for that i need to make use of URL iview parameters, but i am not aware of how to use it, can anybody help me to resolve this issue??
    Thanks in advance,
    Regards,
    Ameya.

    Hi Ameya,
    Basically, you need to create a HTTP system, then create a URL Iview giving this http system as a reference in it.
    Check this <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=389042">thread</a> for details.
    You can also refer to
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/f5/eb51730e6a11d7b84900047582c9f7/frameset.htm">SAP Help Library</a>
    cheers~
    avadh

  • Reports failing to Email - losing logon parameters

    Post Author: hd1
    CA Forum: General
    I have some reports that are failing to email.  There are 2 reports that fail everytime they are supposed to run.  The first report I have that is failing is not getting emailed when it should.  It says that there were incorrect logon parameters but I was able to pull up the report.  I have had a similiar issue but once I enter the password in for report it works fine but this issue is different.  The password is populated but the report will not email.  The other issue I have is a strange one and it this error is only on my other report.
    ERROR:  Failed to retrieve initial report values.  For example, database information for this report could be incomplete or incorrect.  This is a configuration problem.  please contact your systems administrator.
    Once I go to into the Central Management Console, I can refresh the reset the report, then it works fine, but this error comes up every week.  This report however, is not getting emailed, this error is seen when you try to view the report on infoview.
    Has anyone had a similar problem?

    Hi, apologies for the late reply, I've finally got time to follow this up.
    I've unmarked Susan's reply as answer until I have actually fixed it.  The linked info seems relevant but isn't hitting it on the head.  
    Reports cannot be generated manually, they fail whether manual or scheduled.  The receive connectors appear fine and are configured correctly.  The "Default SERVERNAME"
    receive connector is still there and is untouched since the initial fresh install of this server.  I verified the config is as per;
    and
    I will try the fix my network wizard out of hours on our own server and update this post later.

  • Remote URL with parameters

    I'm building a ADF Mobile application and would like to call remote URL with parameters however there is no concrete example of this in the developer guide. I would like to call www.google.com?q=queryParam where queryParam is an user input.
    Thank you...

    I think you need to first define a white list of sites and this will allow opening the page in the web view instead of a separate browser see:
    http://docs.oracle.com/cd/E35521_01/doc.111230/e24475/remoteurl.htm#BABJFEAE

  • Lauching URLS with parameters Form Personalization

    Hello,
    At Crawley Borough Council we wish to use FP to launch urls with parameters; this would really enhance how CRM is used at Crawley BC. There values are taken from the contact centre customer block e.g. CUSTOMER_HEADER_BLK.CUST_FNAME would could be translated to the value of FRED.
    I can launch URLs without parameters ok, as soon as I add parameters I either get a url that does not translate the parameters or get an ORA error on vaildation.
    Can somebody please advise me the correct way to proceed.
    URL where parameters not translated when launched.
    http://cbcstlintraa/stellent/idcplg?&IdcService=GET_FILE&dDocName=CRMResultsForm&RevisionSelectionMethod=Latest&Rendition=Web&QueryText=(dDocType%20<Substring>%20'FormPublished'%20<or>%20dDocType%20<Substring>%20'ScannedDocs')%20<and>%20(xCRMName%20<Substring>%20' ||: CUSTOMER_HEADER_BLK.CUST_FNAME || '<or>%20xCRMPartyID%20<Substring>%20' ||:CUSTOMER_HEADER_BLK.CUST_PARTY_ID||') '
    URL that fails validation
    ='http://cbcstldeva/stellent_test/groups/internal/documents/callform.jsp&customer=CSAMEN&firstname='||CUSTOMER_HEADER_BLK.CUST_FNAME||'&lastname='||CUSTOMER_HEADER_BLK.CUST_LNAME||'&address_1='||CUSTOMER_HEADER_BLK.CUST_ADDRESS1||'&address_2='||CUSTOMER_HEADER_BLK.CUST_ADDRESS2||'&citytown='||CUSTOMER_HEADER_BLK.CUST_CITY||'&county='||CUSTOMER_HEADER_BLK.CUST_STATE||'&postcode='||CUSTOMER_HEADER_BLK.CUST_POSTAL_CODE||'&serviceid='||INCIDENT_TRACKING.INCIDENT_NUMBER||'

    Hi there,
    Try using this syntax for the variable: ${item.customer_header_blk.cust_fname}
    E.g.: ='http://www.google.fr/search?q='||${item.customer_header_blk.cust_fname}
    for a Google search based on your customer first name...

  • How to invoke JSF With Standard Urls and parameters

    Hi,
    Could some one please help me how to invoke JSF with standard Urls and parameters?
    My requirement is:
    http://localhost:8080/myapp/faces/jsf_page.jsp?trackerID=11&viewPage="products"
    then i want to save the tracker details into database and redirect the user to "products" page.
    Would some one suggest me where can i get some example?

    Hi BalusC,
    It didn't solve my proble.....Your solutions are fantastic for most of the issues. But mine problem is unclear where JSF page tags.
    If possible, Could you please provide me how to invoke the method from JSF page....
    same code works if the user click on command button but my requirement is as soon as the user click on the link from 3rd party website, then he need to come to our web application and invoke the JSF page along with ManagedBean for saving details and redirect to disganted webpage.
    I will provide the following link to 3rd party websites. the URL is :: http://somedomain.com/myApp/Tracker.JSF?trackerID=111
    Could you please provide me the code i need to write in JSF ....just for invoking ManagedBean class...? how i code for page on load call the managedBean for specific method?

  • URL logon groups are empty in SMMS

    hello,
    i'm trying to configure http load balancing with message server.
    i've created a logon group and assigned it to url webgui in SICF
    it seems to work but in sape note 751873 it is said that logon groups and corresponding urls could be loaded and checked in transaction SMMS using functions via Goto -> Expert functions -> HTTP
    the problem is that, here in SMMS, my url logon groups list is always empty...
    is it normal?
    regards

    Hi Olivier,
    In case you use Integrated ITS in a Portal environment you should have a closer look at notes 1029194 and 1040325.
    Thanks and regards,
    Dieter

  • Can I get the tab's(Level 1 menus) invoke function's URL and parameters

    Hi,
    Can I get the tab's(Level 1 menus) invoke function's URL and parameters in CO?
    Not just the tab being seleced,All the tab's nvoke function's URL.
    Thanks,
    binghao

    I got it.use OALinkBean's method getDestination()

Maybe you are looking for