How to invoke JSF With Standard Urls and parameters

Hi,
Could some one please help me how to invoke JSF with standard Urls and parameters?
My requirement is:
http://localhost:8080/myapp/faces/jsf_page.jsp?trackerID=11&viewPage="products"
then i want to save the tracker details into database and redirect the user to "products" page.
Would some one suggest me where can i get some example?

Hi BalusC,
It didn't solve my proble.....Your solutions are fantastic for most of the issues. But mine problem is unclear where JSF page tags.
If possible, Could you please provide me how to invoke the method from JSF page....
same code works if the user click on command button but my requirement is as soon as the user click on the link from 3rd party website, then he need to come to our web application and invoke the JSF page along with ManagedBean for saving details and redirect to disganted webpage.
I will provide the following link to 3rd party websites. the URL is :: http://somedomain.com/myApp/Tracker.JSF?trackerID=111
Could you please provide me the code i need to write in JSF ....just for invoking ManagedBean class...? how i code for page on load call the managedBean for specific method?

Similar Messages

  • How to invoke EJB with BPEL?

    How to invoke EJB with BPEL?
    I know there are two ways: WSIF and SOAP.
    But I don't how to do step by step. Please help me.
    Thanks
    Melody

    And I used the method said by soaUser to generate the WSIF binding WSDL file for a Java class.
    Then I put this WSDL file into a BPEL project directory and create a partner link with this.
    But after I invoke this BPEL, a error happen:
    Error while determining signature of method sayHello : The meta information is not consistent.; nested exception is:
         org.collaxa.thirdparty.apache.wsif.WSIFException: Could not instantiate class 'javaws.SayHelloElement'; nested exception is:
         java.lang.ClassNotFoundException: javaws.SayHelloElement
    Even after I put the Java class into the %SOA_HOME%\bpel\system\classes directory, this error still happen.
    How to resolve?
    Thanks,
    Melody

  • How can I print with the black and white cartridge only?

    I am trying to print using the black and white cartridge only because magenta is out of ink but I'm getting the following error message in HP Photosmart C7200 series print dialog:
    The printer is out of ink.
    The following ink cartridges are empty: Magenta. Replace these ink cartridges to resume printing.
    How can I print with the black and white cartridge only?
    Mac OSX 10.7.3
    HP Photosmart C7280 (7200 series)
    This question was solved.
    View Solution.

    I am absolutely disgusted by this; clearly a scam from HP to make more money by selling extra ink cartridges!!  I will make sure to never buy any products from the shoddy rip off merchants at HP ever again!!
    You should be ashamed!!

  • How to link asset with purchase order and PO Item.

    Hello,
           I have to generate a report which contains columns
    Asset No , po no(ebeln) ,PO Item(ebelp),Material no etc
    My query is how to link asset with purchase order and      PO Item.
    I am selecting asset and po no. from anla  but how to get
    po item no(ebelp)?
    po line item is important in this report because every line item has differrent asset and material no.
    i tried to match asset no in mseg table but i am not getting asset no in mseg .
    how should i proceed ?

    Thanks Thomas & Srimanta for the quick response.
    When I checked EKKN table by entering PO there is no asset no. in anln1 field.
    Also I would like to add that, In me23n for a PO, account assignment category we are entering 'F' for internal order settlement.
    Where can i find the link between asset and po no(ebeln) and po item(ebelp)?
    Regards,
    Rachel
    Edited by: Rachel on Aug 11, 2008 7:23 AM

  • New MVC with Standard Tags and DB sample

    I have posted initial build of a new learning application on
              SourceForge "basicPortal" under CVS
              http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/basicportal/basicportal
              It is using Struts with Standard Tags and X: Transform from DB, Realm
              base security, CURD, etc. etc. I have big plans for this, to be 20% of
              code that gets used 80% of time and "faces" and expression language
              compliant.
              (Err.. this build is not for newbies, but I will update it .... a lot
              and often.)
              To keep up on this and related topics, there is a mail list
              http://www.netbean.net/mailman/listinfo/mvc-programmers
              that also gets you password to other baseBeans.com features.
              and a newsgroups readers news.baseBeans.com.
              Hope you like,
              Vic C.
              

    Looking at the XFILES.5.xml file and Install.vbs files of the XFILES installer, it appears that the XDBPM_SUPPORT and XFILES_DBA_TASKS actions will only be run if you enter a SYSDBA user in the "DBA User" field of the installer. However, for some reason, Oracle seems to have commented out the command that checks to ensure that the DBA user you entered is a SYSDBA user, and the "DBA User" field defaults to SYSTEM, which is not a SYSDBA user. Since I got things working I haven't tried rerunning the installer with a SYSDBA user, but maybe it will work better. The installation documentation and/or the installation scripts need to be updated to reflect the need for a SYSDBA user.
    Regarding the APEX version of XFILES, this has not installation instructions whatsoever, and there are prerequisite steps to get this to install correctly as well. I tried importing the f102.sql file into APEX and it failed on the prereq validation because an "XFILES/Apex" folder wasn't found in XML DB. I went looking for anything that creates this directory and I found that there is another XFILES_DBA_TASKS.sql script specifically for the APEX version. It is included in the f102.sql file. So I cut and paste the contents into SQL*Plus and ran it as SYS. I was then able to install the f102 application.

  • Can I get the tab's(Level 1 menus) invoke function's URL and parameters

    Hi,
    Can I get the tab's(Level 1 menus) invoke function's URL and parameters in CO?
    Not just the tab being seleced,All the tab's nvoke function's URL.
    Thanks,
    binghao

    I got it.use OALinkBean's method getDestination()

  • How do I create a folder or report from a query with a union and parameters

    I have created folders with unions but I am having difficulty coverting a query with a union and parameters.
    The following works great in SQL*Developer without parameters, but I want to change to use parameters for the year and quarter and use it in Discoverer:
    SELECT TO_CHAR(NVL(AV.TAX_ID,999999999),'000000000') FEID,
      AV.FIRM_NAME VENDOR_NAME,
      AV.BIDCLASS CONTRACT_CODES,
      AV.AWAMT AWARD_AMOUNT,
      AV.SOL_MODE FORMAL_INFORMAL,
      AV.CERT BUSINESS_ENTITY,
      AV.ETHNICITY ETHNICTY,
      AV.PO_NUMBER_FORMAT CONTRACT,
      SUM(VP.INVOICE_AMOUNT) AMOUNT_PAID_$
    FROM CONFIRM.VSTATE_PAID_AWARD_VENDORS AV,
      CONFIRM.VSTATE_VENDOR_PAYMENTS VP
    WHERE ( ( AV.PO_NUMBER = VP.PO_NUMBER
    AND AV.VENDOR_ID       = VP.VENDOR_ID ) )
    AND (TO_CHAR(VP.PAYMENT_DATE,'Q') = '4')
    AND ( TO_CHAR(VP.PAYMENT_DATE,'YYYY') = '2009' )
    GROUP BY TO_CHAR(NVL(AV.TAX_ID,999999999),'000000000'),
      AV.FIRM_NAME,
      AV.BIDCLASS,
      AV.AWAMT,
      AV.SOL_MODE,
      AV.CERT,
      AV.ETHNICITY,
      AV.PO_NUMBER_FORMAT
      union
    SELECT TO_CHAR(NVL(AV2.TAX_ID,999999999),'000000000') FEID,
      AV2.FIRM_NAME VENDOR_NAME,
      AV2.BIDCLASS CONTRACT_CODES,
      AV2.AWAMT AWARD_AMOUNT,
      AV2.SOL_MODE FORMAL_INFORMAL,
      AV2.CERT BUSINESS_ENTITY,
      AV2.ETHNICITY ETHNICTY,
      AV2.PO_NUMBER_FORMAT CONTRACT,
      0 AMOUNT_PAID_$
    FROM CONFIRM.VSTATE_PAID_AWARD_VENDORS AV2
    WHERE
    not exists (SELECT 'X'
                  FROM CONFIRM.VSTATE_VENDOR_PAYMENTS VP2
                 WHERE av2.po_number = vp2.po_number
                       AND (TO_CHAR(VP2.PAYMENT_DATE,'Q') = '4')
                       AND ( TO_CHAR(VP2.PAYMENT_DATE,'YYYY') = '2009' ))
    AND (TO_CHAR(AV2.AWDATE,'Q') = '4')
    AND (to_CHAR(AV2.AWDATE,'YYYY') = '2009')
    GROUP BY TO_CHAR(NVL(AV2.TAX_ID,999999999),'000000000'),
      AV2.FIRM_NAME,
      AV2.BIDCLASS,
      AV2.AWAMT,
      AV2.SOL_MODE,
      AV2.CERT,
      AV2.ETHNICITY,
      AV2.PO_NUMBER_FORMAT Can someone provide a solution?
    Thank you,
    Robert

    Hi,
    You can take the parameters to the select so that you will be able to create conditions over them.
    Try to use this SQL instead of your and in the discoverer workbook create the conditions and parameters:
    SELECT TO_CHAR(NVL(AV.TAX_ID,999999999),'000000000') FEID,
    AV.FIRM_NAME VENDOR_NAME,
    AV.BIDCLASS CONTRACT_CODES,
    AV.AWAMT AWARD_AMOUNT,
    AV.SOL_MODE FORMAL_INFORMAL,
    AV.CERT BUSINESS_ENTITY,
    AV.ETHNICITY ETHNICTY,
    AV.PO_NUMBER_FORMAT CONTRACT,
    TO_CHAR(VP.PAYMENT_DATE,'YYYY') P_YEAR,
    TO_CHAR(VP.PAYMENT_DATE,'Q') P_QTR
    SUM(VP.INVOICE_AMOUNT) AMOUNT_PAID_$
    FROM CONFIRM.VSTATE_PAID_AWARD_VENDORS AV,
    CONFIRM.VSTATE_VENDOR_PAYMENTS VP
    WHERE ( ( AV.PO_NUMBER = VP.PO_NUMBER
    AND AV.VENDOR_ID = VP.VENDOR_ID ) )
    --AND (TO_CHAR(VP.PAYMENT_DATE,'Q') = '4')*
    --AND ( TO_CHAR(VP.PAYMENT_DATE,'YYYY') = '2009' )*
    GROUP BY TO_CHAR(NVL(AV.TAX_ID,999999999),'000000000'),
    AV.FIRM_NAME,
    AV.BIDCLASS,
    AV.AWAMT,
    AV.SOL_MODE,
    AV.CERT,
    AV.ETHNICITY,
    AV.PO_NUMBER_FORMAT ,
    TO_CHAR(VP.PAYMENT_DATE,'YYYY') P_YEAR,
    TO_CHAR(VP.PAYMENT_DATE,'Q') P_QTR
    union
    SELECT TO_CHAR(NVL(AV2.TAX_ID,999999999),'000000000') FEID,
    AV2.FIRM_NAME VENDOR_NAME,
    AV2.BIDCLASS CONTRACT_CODES,
    AV2.AWAMT AWARD_AMOUNT,
    AV2.SOL_MODE FORMAL_INFORMAL,
    AV2.CERT BUSINESS_ENTITY,
    AV2.ETHNICITY ETHNICTY,
    AV2.PO_NUMBER_FORMAT CONTRACT,
    TO_CHAR(VP.PAYMENT_DATE,'YYYY') P_YEAR,
    TO_CHAR(VP.PAYMENT_DATE,'Q') P_QTR
    0 AMOUNT_PAID_$
    FROM CONFIRM.VSTATE_PAID_AWARD_VENDORS AV2
    WHERE
    not exists (SELECT 'X'
    FROM CONFIRM.VSTATE_VENDOR_PAYMENTS VP2
    WHERE av2.po_number = vp2.po_number
    AND (TO_CHAR(VP2.PAYMENT_DATE,'Q') = TO_CHAR(VP.PAYMENT_DATE,'Q') )
    AND ( TO_CHAR(VP2.PAYMENT_DATE,'YYYY') = TO_CHAR(VP.PAYMENT_DATE,'YYYY') ))
    --AND (TO_CHAR(AV2.AWDATE,'Q') = '4')*
    --AND (to_CHAR(AV2.AWDATE,'YYYY') = '2009')*
    GROUP BY TO_CHAR(NVL(AV2.TAX_ID,999999999),'000000000'),
    AV2.FIRM_NAME,
    AV2.BIDCLASS,
    AV2.AWAMT,
    AV2.SOL_MODE,
    AV2.CERT,
    AV2.ETHNICITY,
    AV2.PO_NUMBER_FORMAT,
    TO_CHAR(VP.PAYMENT_DATE,'YYYY') P_YEAR,
    TO_CHAR(VP.PAYMENT_DATE,'Q') P_QTR
    Tamir

  • How to invoke the DisplayTemplate using URL

    Hi
    Here i am trying to invoke display template using url. But i am getting error .
    i am using the following URL
    http://hdchctdam34235/Lighthammer/ChartServlet?Width=640&Height=400&QueryTemplate=/Samples/Reports/SalesQuery.xml&DisplayTemplate=/venkat/sampleAppl/sample_report_example3.xml&Content-Type=image/gif&IllumLoginName=venkat&IllumLoginPassword=venkat
    please help on this

    Venkat,
    I agree with Rick on all three points...
    Hint:  Take a look at how dynamic page generator builds it's URL.
    Sam

  • How to integrate  JSF  with JMS

    It is usual way to process message received from OnMessage via MDB. May I know how to call JSF back bean from MDB to display message on the view?
    Thanks,
    Kinson

    ewterwytryu wrote:
    It is usual way to process message received from OnMessage via MDB. May I know how to call JSF back bean from MDB to display message on the view? MDB run in the EJB container, JSF runs in the web container so there is no way to directly access JSF backing beans from a MDB. Two solutions come to mind:
    1) Initiate a HTTP request from the MDB. Note that you will not have access to a specific user's web session in this case (unless perhaps if you pass the session id to the MDB and postfix it to the URL as done by the application server when cookies are not available -- but I would call this a hack).
    2) Write the data to a shared resource (typically a database). So the MDB would write to the database and the JSF system would access the database and react accordingly.
    Another potential solution is that you do not really need a MDB at all, but instead need the web application to receive the messages directly (via MessageConsumer.receiveNoWait()).

  • How to resolve Agents with pending URL changes

    Greetings,
    I have run the EMDIAG tool against my 12c OMS and one section of the results hows thie following -
    7001. Agents with pending URL changes
    LAST_EMD_URL
    EMD_URL
    https://lepisma.ucdavis.edu:3872/emd/main
    https://lepisma.ucdavis.edu:1830/emd/main
    1 row selected.
    verifyASLM
    ======================================================================
    On this host ./emctl status agent returns -
    Oracle Enterprise Manager 12c Cloud Control 12.1.0.1.0
    Copyright (c) 1996, 2012 Oracle Corporation. All rights reserved.
    Agent Version : 12.1.0.1.0
    OMS Version : 12.1.0.1.0
    Protocol Version : 12.1.0.1.0
    Agent Home : /usr/local/oracle/product/agent12g/agent_inst
    Agent Binaries : /usr/local/oracle/product/agent12g/core/12.1.0.1.0
    Agent Process ID : 44637
    Parent Process ID : 44555
    Agent URL : https://lepisma.ucdavis.edu:3872/emd/main/
    Repository URL : https://oracle-emrep1.ucdavis.edu:4904/empbs/upload
    Started at : 2013-04-20 16:09:06
    Started by user : oracle
    Last Reload : (none)
    Last successful upload : 2013-04-22 13:34:14
    Last attempted upload : 2013-04-22 13:34:14
    Total Megabytes of XML files uploaded so far : 134.96
    Number of XML files pending upload : 1
    Size of XML files pending upload(MB) : 0.03
    Available disk space on upload filesystem : 62.49%
    Collection Status : Collections enabled
    Last attempted heartbeat to OMS : 2013-04-22 13:34:11
    Last successful heartbeat to OMS : 2013-04-22 13:34:11
    Agent is Running and Ready
    Examinig the emd.properties file shows no entry for https://lepisma.ucdavis.edu:1830/emd/main and ./emctl config agent listtargets only shows the following for oracle_emd -
    [lepisma.ucdavis.edu:3872, oracle_emd]
    This was recently upgraded from 11g and prior to the upgrade there were difficulties patching this agent. Because of that it was reinstalled in 12c. I have no clue what is causing the issue let alone how to resolve it. Any suggestions are greatly appreciated.
    Thank you.
    Bill Wagman

    It's ok to have 11g agent and 12c agents up and running simultaneously and we do it all the time during migration from one to the other since they have to run on different ports (12c checks this at install ONLY IF the 11g agent it up and running when the 12c agent is being pushed out to the host).
    Also, if EMDIAG is the only place you see 1830 port being reported, it may be becuase its doing a search for any agents currently installed on the server. So if you still have both the 11g agent and 12c agent installed, this should not be an issue that it it reporting that URL/port with 1830 for the 11g agent. Since you can't upgrade 11g agents to 12c, (its required to do a new install of 12c agent) you have to do a complete uninstall of the 11g agent first from the OEM 11g gui console, then at the inventory level where the inital 11g agent was installed, than you may still need to manually remove that 11g directory if your runInstaller did not remove it once its "uninstalled".
    Edited by: ora6dba on Apr 25, 2013 7:24 AM

  • I need to reinstall my computer, how do I deal with Premiere pro and After effects?

    Hello,
    As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
    I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
    If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
    I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
    Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
    I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
    I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
    Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
    I have Creative suit production premium, I also have the free Creative cloud.
    It is only Premiere pro and After effects that I am using and am worried about.
    Thank you for any help.
    -Lisa Kajupank
    (and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
    Message was edited by: umustbejoking

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (84620)

  • How to setup grub2 with arch linux and xen, lvm on luks

    OK, so I tried downloading this package from AUR:  https://aur.archlinux.org/packages/xen-git/ , but that has patching problems as noted in the comments.  It looks like the packagebuild sets up all the xen stuff for you, but I can't seem to get the package to install because of the error's while patching.  If anyone can point me in the right direction on what all the extra files in the PKGBUILD are for or how to debug problems with PKGBUILDs not working because of patches.
    So next I just tried to compile the latest xen from git://xenbits.xen.org/xen.git (with ./configure, make, make install) and that seemed to go fine, but I'm a bit confused:
    1.  Do I have to do any additional configuration for xen when working with arch linux?  On ubuntu I could just compile the source, update grub, and make sure to start the x services at runtime.
    2.  How do I set up grub to load xen with this setup?  Right now this is my /boot/grub/grub.cfg:
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda3:vgStorage"
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    #GRUB_COLOR_NORMAL="light-blue/black"
    #GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    #GRUB_BACKGROUND="/path/to/wallpaper"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    ~
    I've tried throwing in a line like: XEN_HYPERVISOR_CMDLINE="cryptdevice=/dev/sda3:vgStorage", but nothing new shows up on the grub boot menu.
    First time trying to set up a non-ubuntu system, please help!

    As for XEN.... well you could always try QEMU/KVM or LXC.
    As for the LVM2-on-LUKS/dm-crypt
    My /etc/mkinitcpio.conf looks like this...
    MODULES="aesni_intel ata_generic ata_piix nls_cp437 ext4 intel_agp i915 dm-snapshot"
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect block keymap encrypt lvm2 filesystems keyboard fsck shutdown"
    /etc/defaults/grub
    GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda2:root:allow-discards"
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    GRUB_TERMINAL_INPUT=console
    GRUB_GFXMODE=auto
    GRUB_GFXPAYLOAD_LINUX=keep
    GRUB_DISABLE_RECOVERY=true
    The running grub config looks like this
    /boot/grub/grub.cfg
    9 insmod part_gpt
    10 insmod part_msdos
    53 if loadfont unicode ; then
    54 set gfxmode=auto
    55 load_video
    56 insmod gfxterm
    57 set locale_dir=$prefix/locale
    58 set lang=en_US
    59 insmod gettext
    60 fi
    61 terminal_input console
    62 terminal_output gfxterm
    63 set timeout=3
    84 menuentry 'Backup, Arch Linux grsec kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-grsec kernel-true-12341234-8080-8080-8080-332200882255' {
    85 load_video
    86 set gfxpayload=keep
    87 insmod gzio
    88 insmod part_msdos
    89 insmod ext2
    90 set root='hd1,msdos2'
    91 if [ x$feature_platform_search_hint = xy ]; then
    92 search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
    93 else
    94 search --no-floppy --fs-uuid --set=root BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
    95 fi
    96 echo 'Loading Linux grsec kernel ...'
    97 linux /vmlinuz-linux-grsec root=/dev/mapper/VolGroup00-lvroot rw cryptdevice=/dev/sda2:root:allow-discards quiet
    98 echo 'Loading initial ramdisk ...'
    99 initrd /initramfs-linux-grsec.img
    100 }
    Things to note:
    Numerical UUID is the UUID of the ROOT partition.
    Alphabetical UUIS is the BOOT partition
    hd1,msdos2 AND ahci1,msdos2 are how the Grub Bootloader numbers the drives not Linux.
    I have my BOOT partition on a USB stick, and it is the Second partition.
    So, that would make it, Device 2 and Partition 2
    Device numbering starts at 0
    Partition numbering starts at 1
    Oh, and note that you don't need ":allow-discards" ... at all but certainly if you don't have an SSD. Also note that I included the line numbers so it is very clear that I didn't post the whole thing, but instead what I thought was relevant. Finally, I am loading modules that I don't even need, but what the hell... if it ain't broke, don't fix it
    Last edited by hunterthomson (2013-12-04 08:31:45)

  • How do I composite with a matte and fill ?

    Hi all, If I have for example, a image of the desert for the background. And then I have a logo I want to add over it. And that logo comes with a matte and fill. How do I composite that over the desert image ? I've tried working with the (add image mask). But I cant fiqure it out.
    Again there are 2 seperate files for the matte and fill.
    Thanks for any replies

    Apply the image mask to the fill (select the fill layer, and choose Object > Add Image Mask). Then drag the matte layer into the well in the HUD (heads up display) and set it to Luma rather than the default of Alpha in the HUD's pop-up menu.

  • How to print jTable with custom header and footer....

    Hello all,
    I'm trying to print a jTable with custom header and footer.But
    jTable1.print(PrintMode,headerFormat,footerFormat,showPrintDialog,attr,interactive)
    does not allow multi line header and footer. I read in a chat that we can make custom header and footer and wrap the printable with that of the jTable. How can we do that..
    Here's the instruction on the chat...
    Shannon Hickey: While the default Header and Footer support in the JTable printing won't do exactly what you're looking for, there is a straight-forward approach. You can turn off the default header/footer and then wrap JTable's printable inside another Printable. This wrapper printable would then render your custom data, and then adjust the size given to the wrapped printable
    But how can i wrap the jTable's Printable with the custom header and footer.
    Thanks in advance,

    I also once hoped for an easy way to modify a table's header and footer, but found no way.
    Yet it is possible.

  • How to Invoke Oracle Configurator via URL Outside the APPS Firewall

    Hi Gurus,
    We would like to invoke Oracle Configurator via URL same as Oracle iStore. Please let me know the process/steps to meet the requirement.
    Thanks in Advance,
    Venky.

    There is no restriction that Oracle Configurator may only be executed from within an Oracle hosting application. Configurator may be invoked from any application that has the ability to call Configurator's UI servlet. As an example, Astec (now part of Emerson Network Power) has had a Configurator application they call their "Power Wizard" on their public website for nearly eight years (http://www.powerconversion.com/powerwizard/).
    Venky, I would recommend you search My Oracle Support for articles containing 'configurator firewall' or 'configurator ssl', and then filter the results to just EBS articles. If what you find there is not helpful, opening a Support Request to get information more tailored to your particular scenario may be advisable.
    Eogan

Maybe you are looking for