Bugs I've identified

These are some bugs I've identified with Safari which have yet to be resolved in the latest version available for download (as far as I can tell anyway!) ...
- There is a memory leak somewhere in the application - a few times I’ve had to kill the process as it gobbles up more and memory until the machine grinds to a halt.
- The Windows Media Player plugin leaves a lot to be desired - number one on the list would be a pause button!
- It has a problem with the tinyMCE WYSIWYG editor that is found in many web applications, including Wordpress - because it trashes Safari as soon as it starts the browser simply blocks tinyMCE. The tinyMCE people say it’s a Safari bug and nothing they can do about it.
- Occassionally a link stops being “clickable” (but only occassionally).
- Some websites (my bank’s online banking site being one) refuse to load in Safari because it’s not a “supported browser”.
- There doesn’t appear to be a keyboard shortcut to navigate tabs (I like keyboard shortcuts).
- There doesn’t appear to be an option to open all pop-ups in a new tab instead of new window without holding down control when clicking a link.
- You can’t insert “special” characters using the Alt+ASCII code into textboxes because Safari loses any text after it. Even if you try and do a copy+paste from the browser windows into Notepad it loses the text but bizarrely you can copy special characters from Notepad and it’s fine with those. Go figure.
- You can’t insert an e with an acute accent using the keyboard shortcut CtrlAlte (as used in Deja-Vu or Cafe) because Safari has hijacked it for clearing the cache.
I appreciate some of these may have been discussed already but there are far too many posts for me to trawl through to find out.

- It has a problem with the tinyMCE WYSIWYG editor
that is found in many web applications, including
Wordpress - because it trashes Safari as soon as it
starts the browser simply blocks tinyMCE. The tinyMCE
people say it’s a Safari bug and nothing they can do
about it.
Please report this issue to Radar: https://bugreport.apple.com
- Some websites (my bank’s online banking site being
one) refuse to load in Safari because it’s not a
“supported browser”.
Please report these sites to Radar: https://bugreport.apple.com
- There doesn’t appear to be a keyboard shortcut to
navigate tabs (I like keyboard shortcuts).
ctrl + shift + [
ctrl + shift + ]
- You can’t insert “special” characters using the
Alt+ASCII code into textboxes because Safari loses
any text after it. Even if you try and do a
copy+paste from the browser windows into Notepad it
loses the text but bizarrely you can copy special
characters from Notepad and it’s fine with those. Go
figure.
This is known reported issue.
- You can’t insert an e with an acute accent using
the keyboard shortcut CtrlAlte (as used in Deja-Vu
or Cafe) because Safari has hijacked it for clearing
the cache.
Please report this bug to Radar: https://bugreport.apple.com

Similar Messages

A possible bug in iPod 5G

I've a new iPod 5G 30GB, whilst I love the iPod, the HD lag times are too long (I've a seperate post regarding this at http://discussions.apple.com/forum.jspa?forumID=808&start=0) but amoungst this lag problem I appear to have found a bug, or perhaps identified a problem with my iPod. Don't know which...
At times if I select a track from an artist > album > track, (eg track #3) you can see that the iPod trying to start the tune, but after 2-3 seconds it will give up and play the next track instead.
Just to prove to myself that I am not crazy I showed the problem to a workmate but the problem manifested itself further. I was on track #4 and clicked skip 5 times. The iPod took ages (10-12 seconds) just to skip to track #10 but then it wouldn't play track 10 and so skipped itself and tried to play track 11, then tried 12, 13, 14, 15, and finally stopped on track 16 (the last track) and played it.
This auto-skipping process took around 10-15 seconds.
I was hoping that my iPod 5G brothers and sisters could confirm/deny that they too have these problems?
ps. The problem doesn't always occur, but if I try and listen to Destiny's Child with album art (audio was ripped from CD AAC 128Kpbs) it will eventually play up.
pps. I have recently "restored" my iPod to try and solve this.

For those of you who don't have the clicking problem, I had a simular situation. When you tried to play a song it would skip to the next one or a random number ahead. This was because the files were no longer there. It may be caused by the automatic updating being inturrupted before it wiped the HDD. Try restoring the files. If it continues to happen, i suggest getting a third party app. like Anapod. It will tell you what iPod files that are not on your pc and vise vera. Then it allows you to transfer both ways. Also it can restore, repair, and remove bad files. Downside is that it looks like a windows file and does not have a media player. Hope this helps.

Bug in PSE8?

I believe I may have identified a bug in PSE8 editor associated with the panorama photomerge function.
What is the procedure to report my findings to Adobe?

Thank you John, it is the same.
I have used a very early version of PSE as well as PS7, and am finding my way around a recently installed version of PSE8.
The error message occurs for me after several photos have been edited, and a new panorama stitch is attempted. If the program is launched without any previous edits having been done, there is no error message.
The bug having been identified, do you know if Corel is planning to apply a fix instead of providing a workaround?

Front Panel Mass Binding Project Variables Issue

Hello -
When attempting to bind controls to shared variables through the front panel mass binding option, there is an issue where you can not seem to bind a "project item" to the control. The method of binding I am using is to export a text list of control names, urls, mode, and function to a text editor utilizing the front panel binding mass configuration options. The text editor shows, in the fourth column, a "0" for no function, a "1" for network item, and a "2" for project item. when attempting to import the list back into the front panel binding mass configuration, all "2" indications become "1", as all items are treated as network. Thus one can not effectively bind to a project shared variable item.
The binding works fine manually by means of utilizing the properties selection of the control, but it is difficult to do this for 821 controls, as in my application.
My application is based on a OPC served group of 821 variables which are linked to controls and indicators through the shared variable representation for each item created in the multiple variable editor.
Does anyone have a work around for this issue, as it is a showstopper right now, ie, you can not effectively bind a large quantity of controls or indicators to project located shared variables as required.
The rationale behind utilizing project located variables instead of network located variables is to reduce the amount of calls to the OPC server which was causnig a large latency in the refresh of the 821 items. With the items defined as shared variables within the project, a single call is issued, which has tremendously sped up the refresh cycle for the list of variables.
Thank you in advance for your insight in this matter,
John DeCroos

Hello Brian A.,
In response to you comment --
"in 2006, and John did not follow up with any more information for Efosa"
-- a great deal of information was provided to NI (Efosa and many, many others, up to the product manager for the DCS module). I have never heard back on a fix for this bug for the identified version of LabVIEW. The reply by Efosa here was well after we had shipped our product -- (please see date + Efosa's apology) -- we had found our own solution as is identified in the original post.
My solution was, as is also indicated in my original post, to manually bind each variable. This was unbelievably time consuming, but was all I had.
The version of software I am now working on uses far less variables, manually bound to avoid the multiple binding issue we had in the past.
I have checked the mass binding function in LV 8.5.1, it works fine now. I guess it would have been nice to have had a reply that the bug had been resolved ---- would have helped me out a bit.
Thank you,
John DeCroos

How do I get Muse to remember the last directory when accessing files?

When I use Muse, I can't get it to remember the last directory or folder I used to access site assets. Every time I go back to access another image or document, explorer has me navigate from the "My Documents" folder to my project folder instead of remembering the last folder I accessed for that Site Project (like most software does).
How do I set Muse to remember my project's folder within a session instead of having me navigate through the My Documents folder back to the project folder every time I want to access a new asset.
Thanks.

Hello,
This "Adobe Air" bug has been identified and is being currently worked upon for a fix in the upcoming releases: http://forums.adobe.com/message/5612009#5612009#5612009
Cheers
Parikshit

Not able to find saved WEBI reorts in BO 4.0

Hi,
I am experiencing weird Web Intelligence 4.0 behavior, I have upgraded report from BO 6.5 to BO XI 4.0 but now am not able to edit report, Edit option is available but when click on it then it doesn't opens edit window. Also same report when i try to save with different name then its not available in BI launchpad but if i try to save it again with same name it shows warning that 'Reports already exists with same name. Do you want to overwrite it?'
I am working on BO 4.0 patch 11.
Thanks in Advance.
Regards,
Ankita

Hi,
Check sap Note 1838654.may be it will help you.
As you mentioned you are on BO 4.0 Patch 11 it is very low patch.More possibilities these are bugs and SAP identified and fixed in later patches.
Better to upgrade on latest service pack and see.
Regards,
Amit

How do I restore tab behavior back to the way it was in FF 3.5??

I just upgraded to FF 3.6.13, I generally wait to upgrade until any new bugs have been identified and corrected. In FF 3.5, when I opened a new tab from a link, the new tab appeared to the right of the current tab (NOT at the very end of the tab bar) and the focus STAYED ON THE CURRENT TAB. If I opened multiple new tabs, they each opened to the right of the previously opened new tab, as in <original tab sequence> Yahoo Facebook GMail MyBlog <New tab sequence after opening links> Yahoo Facebook NewFBLink1 NewFBLink2 NewFBLink3 NewFBLink4 GMail MyBlog, with the focus remaining on the CURRENT TAB (in this example Facebook, from which I was opening the links). In 3.6.13, the tabs SOMETIMES open to the right of the current tab, sometimes at the end of the tab bar, and no matter how I fiddle the settings, I cannot make them CONSISTENT. Have tried the extensions 'Tab Mix Plus' and 'New Tab at End' - these do not give me consistent behavior - sometimes they do as I wish, sometimes not. In addition, sometimes the focus stays on the current tab (which is what I want) - sometimes the focus changes to the new tab just opened, sometimes it stays on the current tab until I've opened 3 or 4 new tabs, then jumps to one of the new ones. In the 'options', I do NOT have 'when I open a link in a new tab, switch to it immediately' checked; yet sometimes it does, sometimes it doesn't. HOW do I achieve consistent behavior?? This is why I don't upgrade often. Very frustrating. I have not changed any plugins, other than trying Tab Mix Plus and New Tabs at End after upgrading to 3.6.13, once I realized that the tab behavior was not consistent. How can I go back to FF 3.5 ???

First of all, sometimes Extensions can interfere with one another. That '''''<u>MAY</u>''''' be the case with your using both Tab Mix Plus and New Tabs at End. They both have a function that you can set for where new tabs appear. TMP has options concerning focus on new tabs.
My suggestions are:
#Un-install New Tabs at End (Tools > Add-ons > Extensions, click New Tabs at End, click Uninstall, then exit and restart Firefox).
#*If using no other extension that affect where tabs appear (to the right of current tab or at end of all open tabs), a simple preference change can affect that change for you, <u>and you have one less extension to be concerned with</u>. I have also made this change as TMP did not have the Focus options to do this when the "new tab at end" feature first appeared or when I first started using the version of Firefox in which this feature appeared:
#*#Type '''about:config''' in the URL bar and press the Enter key.
#*#*See: http://kb.mozillazine.org/About:config
#*#If you see the warning, accept it (promise to be careful).
#*#Filter = browser.tabs.insertRelatedAfterCurrent
#*#Look at the "Value" column ('''false'''=open at end, '''true'''=open after current tab); Value = true is the default.
#*#Double-click that preference to toggle the value from true to false, or false to true
#*#Restart Firefox (File > Restart Firefox)
#*#See: http://www.mydigitallife.info/2010/02/01/change-firefox-to-open-new-tab-at-far-right-end-of-tabbar-disable-insert-next-to-current-active-tab/
#Tab Mix Plus settings
#*Open the Tab Mix Plus Options (Tools > Add-ons > Extensions, click Tab Mix Plus, click Options)
#*Click on Events > Tab Opening
#*#Place a check mark before "Open new tabs next to current one"
#*#I have checked "Open other tabs next to current one"
#*##I have un-checked "Only if related to current tab"
#*##I have un-checked "Change opening order"
#*#I have checked "Open duplicated tabs next to original"
#*Click Events > Tab Focus
#*#If you ALWAYS want to stay on the current tab and let the new tabs open in the background, un-check everything. These selections will/should over-ride Tools > Options > Tabs, "When I open a link in a new tab, switch to it immediately"
See if the above changes give you the results you are seeking. Tab Mix Plus has lots of options. You may need to change one or two settings at a time until it behaves the way you desire. Keep track of the changes you make so that you can easily re-trace/re-set when the results are not what you want.

BPC 7.5NW SP upgrade

Hello Experts,
We are currently on SP 06 and are planning an upgrade to one of the newer service packs. On this end, we have the following questions:
1. How does the upgrade process work? Do we have to perform the upgrade in the serial order of the service packs? Meaning, do we have to go from SP 06 -> SP 07 -> SP 08 -> SP 09, or can we directly go from SP 06 to SP 09?
2. What are the consequences of upgrading to the latest SP, i.e., SP 09? Can we safely assume that all the bugs that were identified in SP 07 and SP 08 would stay 'fixed' in SP 09 upgrade?
3. What is the recommended time frame / interval to perform an upgrade from current SP to the next SP?
4. When we are performing an upgrade, can we perform the upgrade only on a specific appset instead of the entire server environment?
5. While performing the upgrade, can we pick and choose the notes? Or do we have to install all the SAP Notes at once?
6. Lastly, what is the typical effort involved? And how long would the upgrade process usually take? We are asking this because we don't want this upgrade process to collide with our financial closing process.
I request your kind guidance with regards to the above questions. All reponses are greatly appreciated.
Thanks in advance for all your guidance.
Best regards..
Van.

Hi,
>
> 1. How does the upgrade process work? Do we have to perform the upgrade in the serial order of the service packs? Meaning, do we have to go from SP 06 -> SP 07 -> SP 08 -> SP 09, or can we directly go from SP 06 to SP 09?
You can directly upgrade to target support package level. You can check upgrade guide for it.
> 2. What are the consequences of upgrading to the latest SP, i.e., SP 09? Can we safely assume that all the bugs that were identified in SP 07 and SP 08 would stay 'fixed' in SP 09 upgrade?
You need to perform testing in order to check if all is working fine or not.
> 3. What is the recommended time frame / interval to perform an upgrade from current SP to the next SP?
SAP keep on releasing support package. So, based on your upgrade policy or if there is requirement to upgrade to get new functionality or as SAP recommends to update SP's to latest level always, you can plan the upgrade.
> 4. When we are performing an upgrade, can we perform the upgrade only on a specific appset instead of the entire server environment?
No, upgrade is not appset specific.
> 5. While performing the upgrade, can we pick and choose the notes? Or do we have to install all the SAP Notes at once?
Its not like applying SAP notes. Its a bundled format where you need to do the upgrade of whole server.
> 6. Lastly, what is the typical effort involved? And how long would the upgrade process usually take? We are asking this because we don't want this upgrade process to collide with our financial closing process.
>
There are no standard timing to do the upgrade. You can upgrade your test/sandbox BPC server and do the proper testing. As a result you will have an estimate about the time required in upgrade.
Thanks
Sunny

Edit as new not working with draft messages?

Occasionally I want to send two similar messages at the same time. I write one message and save it as a draft - usually at this stage without any addresses specified.
I visit the Drafts folder and use Edit as New to open the draft message as what I expect to be a new message, and then make the changes necessary (including a modified subject) to create the second similar message. I then save the second message as a draft.
When I return to the Drafts folder, the second message has overwritten the first. Edit as New does not appear to work correctly in the Drafts folder ......
I can create two similar drafts by starting a completely new message (with Write), and then manually copying the subject & contents of the original draft. However this is a cumbersome process .....
Please can Mozilla be modified so that Edit as New allows multiple draft messages to be created correctly?

Thanks for your feedback. I've looked at the bug report you identified and added my vote to the system.
I have previously tried using Templates for this issue. However, my messages are usually sent to a mailing list. I have found in the past that the mailing list is expanded when the message is sent, and my templates contained the expanded list (which meant that any addresses subsequently added to the mailing list were ignored).
I don't think I've actually tried creating the template without any addresses, even though this is how I currently work with my drafts. I'll do some more experimenting - it might provide a neat solution to several related problems.
Thanks again for your help.

Workflow : not able to find team working option in SWDD 4.7

Hi,
In ECC 6, the username of latesh aditional changes done to a workflow can be find out by option team working. I am not able to find the same option in 4.7.
Is it not available in 4.7? can somebody help here.
Thanks,

Hi,
Check sap Note 1838654.may be it will help you.
As you mentioned you are on BO 4.0 Patch 11 it is very low patch.More possibilities these are bugs and SAP identified and fixed in later patches.
Better to upgrade on latest service pack and see.
Regards,
Amit

JSSE 1.0.2 : Unsupported keyword OID.2.5.4.5 (id-at-serialNumber)

Hi,
I am encountering the following exception when opening an SSL connection to an
HTTPS web server (running apache + mod_ssl ) :
java.io.IOException: unsupported keyword OID.2.5.4.5
at com.sun.net.ssl.internal.ssl.AVA.<init>([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.RDN.<init>([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.X500Name.a([DashoPro-V1.2-120198])
at com.sun.net.ssl.internal.ssl.X500Name.<init>([DashoPro-V1.2-120198])
at
com.sun.net.ssl.internal.www.protocol.https.HttpsClient.a([DashoPro-V1.2-120198])
at
com.sun.net.ssl.internal.www.protocol.https.HttpsClient.a([DashoPro-V1.2-120198])
at
com.sun.net.ssl.internal.www.protocol.https.HttpsClient.a([DashoPro-V1.2-120198])
at
com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnection.connect([DashoPro-V
1.2-120198])
at
com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnection.getInputStream([Das
hoPro-V1.2-120198])
at [...]The web server's X.509 V3 certificate was acquired from Certinomis (a
french company - www.certinomis.com), and I have imported its root CA and
intermediate CA into my client JVM's keystore using keytool.
After a short investigation, it looks like it is a bug of JSSE 1.0.2
implementation which doesn't recognize the Object Id 2.5.4.5 which
according to the following page, is a standard X.500 attribute :
http://www.alvestrand.no/objectid/2.5.4.5.html
Here is an excerpt of this page :
2.5.4.5 - id-at-serialNumber
OID value: 2.5.4.5
OID description: The Serial Number attribute type specifies an identifier, the
serial number of a device.
An attribute value for Serial Number is a printable string.
serialNumber ATTRIBUTE ::= {
WITH SYNTAX PrintableString (SIZE (1..ub-serialNumber))
EQUALITY MATCHING RULE caseIgnoreMatch
SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch
ID id-at-serialNumber
}The very same code works when accessing web sites using Verisign certificates
which do not contain such a 2.5.4.5 OID in the certificate subject, so it may
well be dued to a malformation of the Certinomis certificate.
Any help appreciated,
Patrick DECAT.
Following is the trace printed out when running the JVM with
-Djavax.net.debug=all (binary blocks replaced by [...]) :
C:\java\jdk1.3.1\bin\javaw -classpath
C:\Development\HttpsReader\classes;
C:\java\jsse1.0.2\lib\jsse.jar;C:\java\jsse1.0.2\lib\jnet.jar;
C:\java\jsse1.0.2\lib\jcert.jar;C:\java\jdk1.3.1\jre\lib\i18n.jar;
C:\java\jdk1.3.1\jre\lib\jaws.jar;C:\java\jdk1.3.1\jre\lib\rt.jar;
C:\java\jdk1.3.1\jre\lib\sunrsasign.jar;C:\java\jdk1.3.1\lib\dt.jar;
C:\java\jdk1.3.1\lib\tools.jar
-Djavax.net.debug=all HttpsReader
keyStore is :
keyStore type is : jks
init keystore
init keymanager of type SunX509
trustStore is: C:\java\jdk1.3.1\jre\lib\security\jssecacerts
trustStore type is : jks
init truststore
adding as trusted cert: [
Version: V3
Subject: CN=CertiNomis, OU=AC Racine - Root CA, O=CertiNomis, C=FR
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: com.sun.rsajca.JSA_RSAPublicKey@19681b
Validity: [From: Thu Nov 09 01:00:00 CET 2000,
               To: Fri Nov 09 01:00:00 CET 2012]
Issuer: CN=CertiNomis, OU=AC Racine - Root CA, O=CertiNomis, C=FR
SerialNumber: [    30303030 39373337 35373338 36303030 ]
Certificate Extensions: 3
[1]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: [...]
[2]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_CertSign
Crl_Sign
[3]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
Algorithm: [SHA1withRSA]
Signature:
0000: [...]
adding as trusted cert: [
Version: V3
Subject: CN=CertiNomis Classe 2, O=CertiNomis, C=FR
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: com.sun.rsajca.JSA_RSAPublicKey@bc49d
Validity: [From: Wed Nov 29 01:00:00 CET 2000,
               To: Mon Nov 29 01:00:00 CET 2004]
Issuer: CN=CertiNomis, OU=AC Racine - Root CA, O=CertiNomis, C=FR
SerialNumber: [    30303030 39373534 38383434 39303030 ]
Certificate Extensions: 6
[1]: ObjectId: 2.16.840.1.113730.1.1 Criticality=false
NetscapeCertType [
   SSL CA
   S/MIME CA
   Object Signing CA]
[2]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: [...]
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: [...]
[4]: ObjectId: 2.5.29.31 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: [...]
[5]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_CertSign
Crl_Sign
[6]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
Algorithm: [SHA1withRSA]
Signature:
0000: [...]
init context
trigger seeding of SecureRandom
done seeding SecureRandom
%% No cached client session
*** ClientHello, v3.1
RandomCookie: GMT: 993394508 bytes = { 24, 22, 81, 16, 235, 187, 118, 86, 45,
138, 98, 195,
155, 110, 203, 166, 77, 227, 57, 128, 191, 247, 109, 154, 243, 212, 78, 25 }
Session ID: {}
Cipher Suites: { 0, 5, 0, 4, 0, 9, 0, 10, 0, 18, 0, 19, 0, 3, 0, 17 }
Compression Methods: { 0 }
[write] MD5 and SHA1 hashes: len = 59
0000: [...]
AWT-EventQueue-0, WRITE: SSL v3.1 Handshake, length = 59
[write] MD5 and SHA1 hashes: len = 77
0000: [...]
AWT-EventQueue-0, WRITE: SSL v2, contentType = 22, translated length = 16310
AWT-EventQueue-0, READ: SSL v3.1 Handshake, length = 74
*** ServerHello, v3.1
RandomCookie: GMT: 993394166 bytes = { 7, 124, 93, 170, 159, 46, 253, 150, 76,
123, 239,
155, 27, 14, 132, 20, 203, 83, 219, 221, 217, 201, 21, 212, 79, 18, 122, 73 }
Session ID: {179, 250, 40, 17, 25, 73, 235, 228, 229, 141, 93, 207, 137, 204, 71,
144, 235,
210, 99, 135, 15, 169, 170, 141, 156, 3, 58, 135, 178, 196, 112, 222}
Cipher Suite: { 0, 5 }
Compression Method: 0
%% Created: [Session-1, SSL_RSA_WITH_RC4_128_SHA]
** SSL_RSA_WITH_RC4_128_SHA
[read] MD5 and SHA1 hashes: len = 74
0000: [...]
AWT-EventQueue-0, READ: SSL v3.1 Handshake, length = 1088
*** Certificate chain
chain [0] = [
Version: V3
Subject: OID.2.5.4.5=10052821, OU=Certificat Mercatis,
[email protected], CN=xxxxxx.xxxxxxxx.com, OU=FC,
O=XXXXXXXXX-XXXXXXXXX, L=Paris, ST=Paris, C=FR
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: com.sun.rsajca.JSA_RSAPublicKey@4a0115
Validity: [From: Fri Mar 23 11:54:32 CET 2001,
               To: Sun Mar 24 11:54:32 CET 2002]
Issuer: CN=CertiNomis Classe 2, O=CertiNomis, C=FR
SerialNumber: [    39383533 34313237 32353633 ]
Certificate Extensions: 8
[1]: ObjectId: 2.16.840.1.113730.1.1 Criticality=false
NetscapeCertType [
   SSL server
   S/MIME
   Object Signing
[2]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: [...]
[3]: ObjectId: 2.5.29.32 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: [...]
[4]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: [...]
[5]: ObjectId: 2.5.29.31 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: [...]
[6]: ObjectId: 2.5.29.17 Criticality=false
SubjectAlternativeName [
[RFC822Name: [email protected]]]
[7]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Non_repudiation
Key_Encipherment
Data_Encipherment
[8]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:false
PathLen: undefined
Algorithm: [SHA1withRSA]
Signature:
0000: [...]
add missing root cert: [
Version: V3
Subject: CN=CertiNomis Classe 2, O=CertiNomis, C=FR
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: com.sun.rsajca.JSA_RSAPublicKey@bc49d
Validity: [From: Wed Nov 29 01:00:00 CET 2000,
               To: Mon Nov 29 01:00:00 CET 2004]
Issuer: CN=CertiNomis, OU=AC Racine - Root CA, O=CertiNomis, C=FR
SerialNumber: [    30303030 39373534 38383434 39303030 ]
Certificate Extensions: 6
[1]: ObjectId: 2.16.840.1.113730.1.1 Criticality=false
NetscapeCertType [
   SSL CA
   S/MIME CA
   Object Signing CA]
[2]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: [...]
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: [...]
[4]: ObjectId: 2.5.29.31 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: [...]
[5]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_CertSign
Crl_Sign
[6]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
Algorithm: [SHA1withRSA]
Signature:
0000: [...]
stop on trusted cert: [
Version: V3
Subject: CN=CertiNomis Classe 2, O=CertiNomis, C=FR
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: com.sun.rsajca.JSA_RSAPublicKey@bc49d
Validity: [From: Wed Nov 29 01:00:00 CET 2000,
               To: Mon Nov 29 01:00:00 CET 2004]
Issuer: CN=CertiNomis, OU=AC Racine - Root CA, O=CertiNomis, C=FR
SerialNumber: [    30303030 39373534 38383434 39303030 ]
Certificate Extensions: 6
[1]: ObjectId: 2.16.840.1.113730.1.1 Criticality=false
NetscapeCertType [
   SSL CA
   S/MIME CA
   Object Signing CA]
[2]: ObjectId: 2.5.29.14 Criticality=false
SubjectKeyIdentifier [
KeyIdentifier [
0000: [...]
[3]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: [...]
[4]: ObjectId: 2.5.29.31 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: [...]
[5]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_CertSign
Crl_Sign
[6]: ObjectId: 2.5.29.19 Criticality=true
BasicConstraints:[
CA:true
PathLen:2147483647
Algorithm: [SHA1withRSA]
Signature:
0000: [...]
[read] MD5 and SHA1 hashes: len = 1088
0000: [...]
AWT-EventQueue-0, READ: SSL v3.1 Handshake, length = 4
*** ServerHelloDone
[read] MD5 and SHA1 hashes: len = 4
0000: [...]
*** ClientKeyExchange, RSA PreMasterSecret, v3.1
Random Secret: { 3, 1, 94, 206, 199, 220, 80, 40, 86, 42, 59, 54, 23, 92, 139,
128, 16, 86, 141, 241, 78, 190, 245, 233, 179, 240, 248, 239, 144, 179, 120,
41, 52, 117, 74, 230, 249, 185, 175, 141, 182, 0, 207, 81, 217, 66, 216, 69 }
[write] MD5 and SHA1 hashes: len = 134
0000: [...]
AWT-EventQueue-0, WRITE: SSL v3.1 Handshake, length = 134
SESSION KEYGEN:
PreMaster Secret:
0000: [...]
CONNECTION KEYGEN:
Client Nonce:
0000: [...]
Server Nonce:
0000: [...]
Master Secret:
0000: [...]
Client MAC write Secret:
0000: [...]
Server MAC write Secret:
0000: [...]
Client write key:
0000: [...]
Server write key:
0000: [...]
... no IV for cipher
AWT-EventQueue-0, WRITE: SSL v3.1 Change Cipher Spec, length = 1
*** Finished, v3.1
verify_data: { 48, 119, 230, 86, 67, 207, 57, 59, 18, 222, 4, 107 }
[write] MD5 and SHA1 hashes: len = 16
0000: [...]
Plaintext before ENCRYPTION: len = 36
0000: [...]
AWT-EventQueue-0, WRITE: SSL v3.1 Handshake, length = 36
AWT-EventQueue-0, READ: SSL v3.1 Change Cipher Spec, length = 1
AWT-EventQueue-0, READ: SSL v3.1 Handshake, length = 36
Plaintext after DECRYPTION: len = 36
0000: [...]
*** Finished, v3.1
verify_data: { 238, 82, 186, 214, 115, 130, 241, 249, 113, 52, 93, 58 }
%% Cached client session: [Session-1, SSL_RSA_WITH_RC4_128_SHA]
[read] MD5 and SHA1 hashes: len = 16
0000: [...]
Finalizer, SEND SSL v3.1 ALERT: warning, description = close_notify
Plaintext before ENCRYPTION: len = 22
0000: [...]
Finalizer, WRITE: SSL v3.1 Alert, length = 22

Just to keep this thread updated, here is some information I got from Sun's support :
"They have closed this as a duplicate of the other bug[The bug was already identified internally].
The fix for it has been put into build # 71 of merlin (1.4).
I don't yet know whether that build is (or will be) early enough to be part of merlin-beta2 (second public beta).
In any case, the problem has been fixed. It's just a matter of when it will
appear in a publicly-available form."

Isdn bchan-number-order ascending round-robin is applied but not working

isdn bchan-number-order ascending round-robin is applied but not working
ios c3825-spservicesk9-mz.124-21.bin
relevant config
controller E1 0/3/0
framing NO-CRC4
pri-group timeslots 1-31
interface Serial0/3/0:15
no ip address
encapsulation hdlc
no logging event link-status
no snmp trap link-status
isdn switch-type primary-net5
isdn overlap-receiving
isdn incoming-voice voice
isdn bchan-number-order ascending round-robin
trunk-group 1
no cdp enable
my problem is this:-
At the moment calls are leaving on the first available channel of my h323 voice gateway PRI, I can apply this command to the interface fine but it makes no difference the b cannels are always being picked on a first come first served basis . I have also tried combination "isdn bchan-number-order decending" and "isdn bchan-number-order descending round-robin" but it makes no difference , the first b channel is always selected .
Any ideas , if you think its a bug can u identify the bug id as I cannot find it .

Hello
I can see that you use ascending , that why you hit 1st channel.You have to choose one of these commands ascending or descending
I have a question here , for your incoming calls which channel hits ?.FYI isdn bchan-number-order descending is enable by default , so if you need to change you have to type ascending. Can you just share incoming calls which channel hits?.This is because before you define your outgoing calls , you have to check your service provider channel used, and this to avoid error channel is not available.
Command
Router(config-if)# isdn bchan-number-order {ascending | descending}
Purpose
Enables B channel selection for outgoing calls on a PRI interface (optional).
Thanks
please rate all useful information

Scale image from small to large(r) without losing resolution

Does anyone know how I can create a "scale action" of an image on a slide from small to large without losing the resolution of the image. Now, when I reduce the size of an image as a starting size and use Scale from the inspector to scale the image to e.g. 200% the images looks very blurred. I want the image in the larger form to have a good resolution.
Thanks for your help.

That's an interesting bug you've identified -- an image that is reduced by 50% and then scaled up to 200% with a Scale action looks blurrier than the original image at 100%. It seems like Keynote is scaling up the reduced image, rather than "removing the reduction" on the original.
One solution that works well is to make a copy of your original image at the final size you want the scaled image to be, then place this copy on top of the scaling image, and build it in immediately after the scaling action with a dissolve build in that starts automatically after the scaling action. What this will do is give you the scaling effect, but at the final size, the full(er) resolution version will dissolve on top of the lower-res version. This procedure is more cumbersome than having the scaling effect work properly, but the result is quite acceptable, and the second dissolve build is pretty much imperceptible.

Af:table filter date format : task-flow navigation issue

hi
When trying to use the date format configured on the Entity Object, with Format Type as Simple Date and Format as "dd-MM-yyyy", there seems to be a problem when using task-flows.
The approach involves an explicitly configured attributeValues binding to use in f:validator and af:convertDateTime components in the af:inputDate in the filter facet, as discussed in the forum thread "af:table filter date format"
at af:table filter date format
I used JDeveloper 11.1.1.3.0 to create the example application
in http://www.consideringred.com/files/oracle/2010/TableFilterDateFormatIssueApp-v0.03.zip
- The page filterEmp.jspx shows expected behaviour, the filter uses the configured date format and there is no problem when navigating to another page and back.
see the screencast at http://screencast.com/t/CtQ9rsVFH3k
- The page menuBTFPage.jspx allows for some navigation after using the filter resulting in the filter showing a date in the wrong format, using scenario (sc1)
-- (sc1-a) : run menuBTFPage.jspx
-- (sc1-b) : on "menu-btf : menu", click the "do go-filter-emp-btf" link
-- (sc1-c) : on "filter-emp-btf : filterEmpFragment", filter on HireDate using "10-03-2005"
-- (sc1-d) : click the "do goReturnSuccess" button
-- (sc1-e) : back on "menu-btf : menu", click the "do go-filter-emp-btf" link again
-- (sc1-f) : back on "filter-emp-btf : filterEmpFragment", see the HireDate filter value in the wrong format as "2005-03-10"
-- (sc1-g) : click the "do goReturnSuccess" button again, which results in an error "The date is not in the correct format."
see the screencast at http://www.screencast.com/t/ORHauBd3oQ
questions:
- (q1) Can the behaviour in scenario (sc1) be reproduced?
- (q2) Why is the filter value in the wrong date format in step (sc1-f)?
- (q3) What can be done to have the filter value consistently in the configured date format, so that errors as in step (sc1-g) can be avoided?
many thanks
Jan Vervecken

hi
First a short summary of relevant aspects of service request 3-2190488381:
- development has reviewed bug 10193260
- development identified some code where a pattern was not applied and started fixing the problem
- out of the blue, development asked "Will clearing out the filter field completely when moving out of ataskflow be an acceptable behavior ?"
- I pointed out some concerns (even in a phone call with development), but development did not see any alternative not "perceived to be very risky because of the current design", so the question whether the clearing-all-filter-fields approach would be acceptable became superfluous.
- following this, bug 10193260 suddenly became an enhancement request (for reasons I still don't understand)
- a workaround was suggested (for behaviour not perceived as a bug), "Clearing the search fields during taskflow exit in the backing bean (in the app)." for which I also received a modified version of my example application TableFilterDateFormatIssueApp-v0.04.zip with an implementation of the suggested workaround
As an exercise to try an understand the suggested workaround (an because my example application seemed to have been modified using the currently yet-to-be-released JDeveloper 11.1.1.4.0) I re-implemented it in the example application
at http://www.consideringred.com/files/oracle/2010/TableFilterDateFormatIssueApp-v0.05.zip
It has a filter-emp-workaround-btf task-flow with a method-call activity on a managed-bean method, responsible for clearing the search fields, resulting in behaviour where the error "The date is not in the correct format." does not occur,
as can be seen in the screencast at http://screencast.com/t/Nq7TkkRQ
public void clearFilterFields()
    BindingContainer vBindingContainer =
      BindingContext.getCurrent().getCurrentBindingsEntry();
    DCBindingContainer vDCBindingContainer = (DCBindingContainer)vBindingContainer;
    DCDataControl vDCDataControl = vDCBindingContainer.getDataControl();
    ApplicationModule vApplicationModule = vDCDataControl.getApplicationModule();
    ViewObject vViewObject = vApplicationModule.findViewObject("EmployeesVOVI");
    ViewCriteriaManager vViewCriteriaManager = vViewObject.getViewCriteriaManager();
    vViewCriteriaManager.clearViewCriterias();
    vViewObject.clearCache();
}Because the managed-bean method requires access to the ADF Model binding layer to get to the View Object instance used for the filtered table, the method-call activity has a page element configured in DataBindings.cpx referring to the same usageId as the page element for the page fragment showing the filtered table. So that both the method-call and view activity depend on one and the same Binding Container (e.i. PageDef file).
The method-call activity, responsible for clearing the search fields, would need to be called before each task-flow-return activity.
As there can be multiple view activities with multiple filtered tables in a bounded task-flow, would that result in multiple method-call activities responsible for clearing search fields (all to be called before each task-flow-return activity)?
It looks like a more general/generic approach is desirable for the suggested workaround to be feasible.
- (q5) Does the suggested workaround imply (as bug 10193260 is not a bug) that all bounded task-flows with filtered tables should implement it to avoid errors about formatting?
thanks
Jan

Baseline timephased data disappeared in MS Project 2013 with Project Server 2013!!!

Hi,
I am facing a very strange problem within a custom "task usage" view that I'
ve created. In the right pane I have three timephased fields (work, baseline
work and actual work). When I first add resources to tasks and save baseline
everything works great and the baseline work data are distributed normally in
the respective line next to the resource name and also in the summary tasks
lines. A few days after saving and publishing the project to the Project
Server 2013, I opened the project from the PrjProfessional and the timephased
baseline data had disappeared. However, the total values of baseline work
(shown in the respective column at the left pane) were all still there. In
other words, I cannot see the distribution of baseline work into the timephased
schedule. When I check the database the data is also gone (MSP_EpmAssignmentBaselineByDay table).
This has a huge impact for the customer!
If found a similar issue reported with Project 2007 --> http://www.44342.com/Microsoft-Project-f1227-t2482-p1.htm
Regards,
Philip
Verlinden Philip

Hi Philip,
Please refer to thjis thread:
https://social.technet.microsoft.com/Forums/projectserver/en-US/5f721eaf-6424-4b32-9c96-fed646e94f88/cumulative-timephased-data-in-ps-2013-db-wrong-or-just-misunderstood?forum=projserv2010setup
I think it is a known bug that Elli identified a few weeks ago. I don't know if there is a fix planned soon by MS.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Bugs I've identified

Similar Messages

Maybe you are looking for