Built two OIF 11.1.1.2 instances in same IDMDomain, second instance cannot read key store

I asked about loading two versions of OIF onto two different managed servers listening on two different ports but within the same IDMDomain that gets bootstrapped here: Different instances of OIF within the same IDMDomain
I have built this out. Here is what it looks like in EM. Ports are highlighted.
AdminServer 7001
     wls_oif1 7499 (bootstrapped at config)
          OIF 11.1.1.2 (bootstrapped at config)
     wls_oif2 7498 (cloned from wls_oif1 in WL Console)
          OIF 11.1.1.2 (changed target from bootstrapped instance to hit both servers)
I had to do a few other hacky things to get this up without any erratic EM or application errors. I had to change the targets on several libraries and other EAR/WARs to hit both wls_oif1 and wls_oif2, and then edited my config.xml for IDMDomin to reference all three servers where it would only reference Admin and wls_oif1 before, and change single references to wls_oif1 to both wls_oif1 and wls_oif2. This got me a stable EM and deployment.
I can pull metadata from http://dlaxoifs101:7499/fed/idp/metadata, but I get an HTTP 500 error when trying http://dlaxoifs101:7498/fed/idp/metadata. The only error in the logs of wls_oif2 OIF instance is:
Message ID
FED-20000
Message Level
1
Relationship ID
0
Component
wls_oif2
Module
oracle.security.fed.sec.key.select.CryptoStore
Host
dlaxoifs101.devapollogrp.edu
Host IP Address
10.87.1.3
User
<anonymous>
Thread ID
[ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'
ECID
37391fee28ccc45c:-13d3734e:13ff2932ce7:-8000-0000000000000570
Message
Cannot open the key store.
I altered the config of the Admin Server and wls_oif2 Identity and Trust to reference some new keystores of my own creation to make sure the cloned server and the Admin server were speaking the same language, but that just prevented me from being able to start wls_oif2 due to an "SSL not trusted" error- which was odd because I am not using SSL in any of these connections.
So am I missing any other keystores, or do I just need to admit that running two distinct OIF instances on the same IDMDomain is not supported and a bad idea?

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

Similar Messages

  • Cannot read CD or DVD built for region 4

    Compaq Presario C762NR Notebook PC that's my machine with Windows 7 - 32
    I have few CDs - DVDs built for region 4 (South America) with soft wares that the hard drive cannot read at all.
    I had change the CD drive configuration to region 4, WINDOWS 7 system locale, and all remaining configuration to Brazil standard.
    Neverthe less, the CD - DVD continues to refuse reading the disks.
    Is there any missing configuration to change and free the CD-DVD drive?

    CesarAlmeida wrote:
    Compaq Presario C762NR Notebook PC that's my machine with Windows 7 - 32
    I have few CDs - DVDs built for region 4 (South America) with soft wares that the hard drive cannot read at all.
    I had change the CD drive configuration to region 4, WINDOWS 7 system locale, and all remaining configuration to Brazil standard.
    Neverthe less, the CD - DVD continues to refuse reading the disks.
    Is there any missing configuration to change and free the CD-DVD drive?
    You said your Region 4 on the drive but what are the format region of the dvd media itself? It sounds like your trying to read media that is for another region and thus it can't read it. Or second the drive is no longer working and when was the last time your did  a firmware update to the OD itself?? Or update the laptop firmware to the latest firmware?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • Excel 2010; Two file opened in a single instance with two different windows... Is it possible?

    Hello
    I'm using Excel 2010
    I need to open a new Excel file to be display on a 2' monitor.  The new file need to be under the same instance has my main Excel file to prevent problem with a special dll collection that I'm using.
    I need to have both file in a separate window
    Is it possible?
    Excuse my English
    Martin

    Hi Martin,
    Open two excel file in one excel instance, display them to different windows.
    Please try the methods listed in the thread below:
    http://social.technet.microsoft.com/Forums/en-US/6ba32569-19a0-4b45-806f-9a42258bdb5f/how-to-open-two-excel-files-in-multiple-monitors-in-windows-7?forum=excel
    Best Regards,
    Wind

  • The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully.

    I am just starting the JDEV and trying to start the weblogic server and then I get the following message.
    The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully.
    Can anybody help me to resolve this issue.

    932013 wrote:
    I am just starting the JDEV and trying to start the weblogic server and then I get the following message.
    The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully.
    Can anybody help me to resolve this issue.
    Try the WebLogic forum:  WebLogic Server - General

  • Server Instance cannot be started because the Integrated WebLogic domain was not built successfully

    Hi,
    I am using a Linux X64 and running JDeveloper 11g R2, J2EE Edition Version 11.1.2.1.0.
    I am having an error when i Run my JSP Page. It says:
    The Server Instance cannot be started because the Integrated WebLogic domain was not built successfully.
    Error log:
    Jan 31, 2012 1:39:44 AM oracle.security.jps.util.JpsUtil disableAudit
    INFO: JpsUtil: isAuditDisabled set to true
    Compiling...
    Nothing to build.
    [1:39:59 AM] Appc compilation begin
    Compiling out of process...
    /usr/java/jdk1.7.0_02/jre/bin/java -Xms128m -Xmx512m -Xverify:none -client -classpath /usr/java/jdk1.7.0_02/lib/tools.jar:/scratch/tchoudhu/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.jsp.diagnosticWithAbsolutePath=true -Dweblogic.classloader.noJarSigners=true weblogic.appc "@/tmp/appcCommandList157371966291066996.txt"
    [1:40:01 AM] Appc compilation end
    [1:40:01 AM] Successful compilation: 0 errors, 0 warnings.
    [Application Test_Project1Application is bound to Server Instance IntegratedWebLogicServer]
    [Starting Server Instance IntegratedWebLogicServer]
    #### Server Instance IntegratedWebLogicServer could not be started: Error starting Server Instance.
    Compiling...
    Nothing to build.
    [2:12:30 AM] Appc compilation begin
    Compiling out of process...
    /usr/java/jdk1.7.0_02/jre/bin/java -Xms128m -Xmx512m -Xverify:none -client -classpath /usr/java/jdk1.7.0_02/lib/tools.jar:/scratch/tchoudhu/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.jsp.diagnosticWithAbsolutePath=true -Dweblogic.classloader.noJarSigners=true weblogic.appc "@/tmp/appcCommandList3807439261747014006.txt"
    [2:12:32 AM] Appc compilation end
    [2:12:32 AM] Successful compilation: 0 errors, 0 warnings.
    [Application Test_Project1Application is bound to Server Instance IntegratedWebLogicServer]
    [Starting Server Instance IntegratedWebLogicServer]
    #### Server Instance IntegratedWebLogicServer could not be started: Error starting Server Instance.
    Compiling...
    Nothing to build.
    [2:48:14 AM] Appc compilation begin
    Compiling out of process...
    /usr/java/jdk1.7.0_02/jre/bin/java -Xms128m -Xmx512m -Xverify:none -client -classpath /usr/java/jdk1.7.0_02/lib/tools.jar:/scratch/tchoudhu/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.jsp.diagnosticWithAbsolutePath=true -Dweblogic.classloader.noJarSigners=true weblogic.appc "@/tmp/appcCommandList2888192197450875810.txt"
    [2:48:16 AM] Appc compilation end
    [2:48:16 AM] Successful compilation: 0 errors, 0 warnings.
    [Application Test_Project1Application is bound to Server Instance IntegratedWebLogicServer]
    [Starting Server Instance IntegratedWebLogicServer]
    #### Server Instance IntegratedWebLogicServer could not be started: Error starting Server Instance.
    I am new to JDev. Can someone please help me with this?

    Use a supported JDK (1.6.something, not 1.7) is what the original poster didn't do.

  • Add instance on Read only field issue

    I have a subform with two fields , one a date field to capture current system date and time and another is a Text field for some comments.
    Then there are two buttons ,one for Adding the instance for these two fields and another is a Save button which makes these two fields
    The requirement is that once both the fields are filled with data and i click on save button, the fields should become read only ,however when i click on the add instance button the instance is added successfully but the save button click is not making the new instance read only.
    The Code for Add Instance Button is :
    "New1.FileNote.instanceManager.addInstance(true);
    xfa.form.recalculate(true);"
    The code for Save button to make the fields read only is :
    New1.FileNote.DateTimeField101.access = "readOnly";
    New1.FileNote.TextField37.access = "readOnly";
    Please guide me as I am totally blank on how to code the same..Have a rough logic of using a for loop with index of the Add Instance but not getting the way out for the code.
    Thanks a lot for any help and guidance.

    Hi Steve,
    Thanks for your reply..I made it happen using the for loop with Index and resolve node. However there is another issue which occured after that..I have a date/time field in that repeating subform instance.
    The run time property is set to Current Date/Time. Now the issue is whenever i click on save, form.recalculate instance changes the existing time value in the previous subbform instance as well
    Is there a way to retain the existing value in the field of the previous instance ??
    Regards
    Kapil

  • PMON process and ORACLE Instance  - Cannot allocate log. Archival required

    Hello there,
    We are running Oracle RAC (9i) database with two nodes and Oracle Applications 11i.The operatiing system is solaris 5.8.
    1.Recently while bouncing the db, i happen to see many PMON process get started up? is it a normal thing to see those process? what is actually happening?
    oracle 14125 1 1 05:02:36 ? 18:46 ora_p007_CMWPROD1
    oracle 14123 1 1 05:02:36 ? 21:33 ora_p006_CMWPROD1
    oracle 14117 1 3 05:02:34 ? 30:58 ora_p003_CMWPROD1
    oracle 14121 1 1 05:02:35 ? 18:56 ora_p005_CMWPROD1
    oracle 5230 1 0 21:45:54 ? 0:11 ora_qmn0_CMWPROD1
    oracle 5192 1 0 21:45:09 ? 0:07 ora_pmon_CMWPROD1
    oracle 5194 1 0 21:45:09 ? 1:37 ora_diag_CMWPROD1
    oracle 5196 1 0 21:45:09 ? 0:48 ora_lmon_CMWPROD1
    oracle 5198 1 0 21:45:09 ? 2:15 ora_lmd0_CMWPROD1
    oracle 5200 1 0 21:45:12 ? 7:51 ora_lms0_CMWPROD1
    oracle 5202 1 0 21:45:13 ? 7:59 ora_lms1_CMWPROD1
    oracle 5204 1 0 21:45:13 ? 0:06 ora_dbw0_CMWPROD1
    oracle 5206 1 0 21:45:13 ? 0:17 ora_lgwr_CMWPROD1
    oracle 5208 1 0 21:45:13 ? 0:53 ora_ckpt_CMWPROD1
    oracle 5210 1 0 21:45:13 ? 0:11 ora_smon_CMWPROD1
    oracle 5212 1 0 21:45:13 ? 0:00 ora_reco_CMWPROD1
    oracle 5214 1 0 21:45:13 ? 0:06 ora_cjq0_CMWPROD1
    oracle 5218 1 0 21:45:13 ? 0:00 ora_arc0_CMWPROD1
    oracle 5220 1 0 21:45:13 ? 0:05 ora_arc1_CMWPROD1
    oracle 5223 1 0 21:45:17 ? 0:17 ora_lck0_CMWPROD1
    oracle 14113 1 1 05:02:33 ? 5:30 ora_p002_CMWPROD1
    oracle 14109 1 0 05:02:33 ? 5:14 ora_p000_CMWPROD1
    oracle 14119 1 1 05:02:34 ? 21:03 ora_p004_CMWPROD1
    oracle 14111 1 1 05:02:33 ? 6:12 ora_p001_CMWPROD1
    2.We happen to see some notifications like
    "Oracle instance <xxx> - cannot allocate log -Archival required" in the alert log file and could see many log switches in a second in archival destination.
    we have three members of log groups (two in each group) in one node and same on the other. Should we have to increase log_buffer_size or addition of redo log files is required?
    the error messages:
    ORACLE Instance xxxx - Can not allocate log, archival required
    ARCH: Connecting to console port...
    Thread 2 cannot allocate new log, sequence 55487
    All online logs needed archiving
    Current log# 12 seq# 55486 mem# 0: /dev/vx/rdsk/racdg/log12a
    Current log# 12 seq# 55486 mem# 1: /dev/vx/rdsk/racdg/log12b
    Fri Oct 10 21:47:45 2008
    Completed checkpoint up to RBA [0xd8be.2.10], SCN: 0x0000.e6dcbc2a
    Fri Oct 10 21:47:49 2008
    ARC0: Completed archiving log 7 thread 2 sequence 55482
    ARC0: Evaluating archive log 10 thread 2 sequence 55480
    ARC0: Unable to archive log 10 thread 2 sequence 55480
    Log actively being archived by another process
    ARC0: Evaluating archive log 9 thread 2 sequence 55483
    ARC0: Beginning to archive log 9 thread 2 sequence 55483
    Any suggestions to overcome these errors would be helpful.
    Thanks,
    Balu.

    Tux Dueñas wrote:
    Bueno.
    A nosotros nos apasado el error de que no se puede guardar los archive logs por falta de espacio en Disco. Eso pasa cuando algun proceso genera demasiadas ransacciones que necesitan ser escritas en los logs. Por esa razon se genera mucho archive log y se llena el espacio en disco.
    Borra los archivelog mas viejos, y que ya los tengas en un backup y asi no habra problema te recomiendo tener un espacio en disco minimo de 50%I hope this is what you meant,
    >
    We apas the error that you can not save the archive logs for lack of space on disk. That happens when any process that generates too many ransacciones need to be written in the logs. For that reason much archive log is generated and fills the space.
    Removes archivelog older, and those who already have a backup and there will be no problem so I recommend you have a disk space minimum of 50%
    >
    This is an international forum so to spread your message as far as possible, use a more universal language, English for example can be a good choice.
    Cheers
    Aman....

  • The Server Instance cannot be started

    I have Jdeveloper 11g and when i am running my .jsf page, it shows error that *"The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully."*
    Kindly provide your help for the same

    Not sure if you have reviewed the following thread:
    Error Creating Integrated WebLogic domain for JDeveloper 11.1.1.1
    Additionally, I generic search of this error led me to Support doc (which can be reviewed using My Oracle Support):
    Rebuild the Integrated Weblogic Domain When It Was Not Built Successfully (Doc ID 1346199.1)

  • The Server Instance cannot be started because the Integrated Weblogic domai

    I am newbie to Jdeveloper .When i try to run my jsp file it gives me this error....
    The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully.
    and the log file shows..
    Log File: C:\Users\Jignesh\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.log
    Label: JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
    Product Home: C:\Oracle\Middleware\jdeveloper\jdev\
    Domain: C:\Users\Jignesh\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain
    "C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Users\Jignesh\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\o.j2ee.adrs\CreateDefaultDomain.py"
    Process started
    wlst > The system cannot find the path specified.
    Elapsed time: 293 ms

    Before you delete the full system directory you try deleting just this one:
    C:\Users\Jignesh\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\DefaultDomain
    and restart JDev
    If this doesn't help then delete the C:\Users\Jignesh\AppData\Roaming\JDeveloper\system11.1.1.2.36.55.36\ and restart

  • Server Instance cannot be started because the Integrated Weblogic domain

    Hi All,
    I am using new version of Jdeveloper . i.e 11.1.1.6.0. I am getting "The Server Instance cannot be started because the Integrated Weblogic domain was not built successfully." error whenever i am trying to run a simple jspx page.
    Please anyone help me out.

    Hi,
    Welcome to OTN.
    Can you try the following.
    1. Close JDev.
    2. Remove the DefaultDomain folder under your [url http://tompeez.wordpress.com/tag/system-folder/]System Folder.
    3. Start JDev
    4. Run your jspx page.
    -Arun

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • How to find name of report if I know name of instance and location of instance in Output File Store

    Hello all,
    can somebody help me to find name of the report if I know name of report instance and also location of instance in Output File Store. It should be done via Query Builder.
    It is ...rpt file as output from Crystal Reports. I tried few commands in Query Builder but usually they finished with timeout error.
    Could you help me and send specific command? Or way how to change timeout of Query Builder?
    Thanks.
    matus

    Hello all,
    We finally found solution.
    We knew that file is located on path .../Output/a_145/009/002/133521/~ce10c.....9332.rtf
    This file has more than 2 GB. We tried to find which report is related and provide necessary actions.
    As I mentioned we still failed due to timeout error - There was an error retrieving data from the server: CMS operation timed out after 9 minutes.
    So we tried to use our testing environment. We started there QueryBuilder and there we successfully tested that we found details about files from FileStore /like Name of the report in Launch Pad, CUID, ...
    SELECT SI_NAME, SI_CUID, SI_FILES FROM CI_INFOOBJECTS WHERE SI_FILES.SI_PATH = 'frs://Input/a_148/020/000/5268/'
    or
    SELECT * FROM CI_INFOOBJECTS WHERE SI_FILES.SI_PATH = 'frs://Input/ a_148/020/000/5268/'
    Best regards,
    matus

  • When i open reader two AcroRd32.exe*32 processes open and never close even after exiting the reader.

    when i open reader two AcroRd32.exe*32 processes open and do not close after closing the reader. i have seen 10 AcroRd31.exe*32 processes open. do I have an undetectable virus or is the software just poorly written and tested. I am running Windows 7 premium that is fully up to date and the reader is up to date also. i have even deleted reader and reinstalled it.
    All 8 Processors activity jumps really high while AcroRd.exe*32 is running with no pdf documents open and as soon as i end the processes the processor activity goes down to near 0 according to the performance tab in task manager. My fan also kicks on because of all the heat from the processor.

    open acrord32.exe and go to edit, preferences, internet, and then uncheck "Allow fast web view" and "allow speculative downloading in the background". This will save your processor and keep your system from locking up from all of the acrord32.exe processes running.

  • Can two users work on different files of the same project?

    Sorry if this has been asked already...but can two users work
    on different files of the same project? How would that work? Would
    it work something like this?
    1. From RoboHelp 7, user A checks out the entire project.
    2. User A checks in the files they are not working with.
    3. User B checks out the project but can only 'edit' the
    files that have been checked in by user A.
    Is this how the source control works?

    That's the basic idea. User A doesn't actually have to check
    out the whole project, though. RSC will selectively check out only
    the files that are actually getting changed. Both writers will have
    a complete copy of the project on their local machines, but the
    files are read-only until they are literally checked out, which is
    on an as-needed basis unless the writer explicitly checks them out.
    G

  • I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

    I'm using same icloud and same apple ID on two iphones. Now i get calls from same number on both iphones at the same time. How to turn off that?

    Apple ID's are not device specific, so when you changed it on the iPad 2 it changed it on the iPhone 4 as well, since it's the same account still. What you need to do is create a second Apple ID (so you'll have two accounts, one for iPhone 4 and a seperate one for iPad 2).
    To create a new Apple ID on your iPad 2:
    1) Go into Settings > Store.
    2) If you are already signed in, tap your Apple ID on the screen and you will be given a few options, one of which is to sign out of your account.
    3) After you sign out, now click the "Sign in" button.
    4) Tap "Create New Apple ID" and follow the instructions on-screen.

Maybe you are looking for