Buisness Process monitioring

I have set up the whole configuration and defined the process and everything in DSWP in "setup buisness process monitoring " . In setup BPM screen everything has been properly defined i took sales process "Account processing in ERP" and have RFC and Data collection frequencies are both "Green" and even all the step under Buisness processes are also "Green" that means they are correct i have filled al the details but still after generating, when i try to Activate it , it throws an error , saying "check customising " . Please help me out and also suggest any guide having step by step process.

Hi,
what kind of error message did you get?
Hint:
If you the select "Generation/Activation" in the navigation tree there should be a text displayed above the buttons for generation & activation stating:
"Check the log for errors (for the error analysis, see SAP Note 705569)."
Have you found your log messages in SAP note 705569 (BPMon: Important Msg's in Activation and Generation) and performed the recommened activties?
Before you start check SAP note 784752 "BPMon in SAP Solution Manager - Prerequisites"
Please also visit an http://service.sap.com/bpm
Regards,
Martin
http://service.sap.com/jsm
Scheduling

Similar Messages

Buisness Process .jpd - How to create Asynchronous Buisness Process

Hello all
I have a Buisness Process that is started by a client request and then
have an event choice with a 6 hours timeout. The two other paths are
also invoked by client calls. More specifically a Card-payment system
that calls my server with an URL of my choice.
How do I make a HTTP call invoke the "waiting" and correct Business
Process? There must be some kind of ID I can ship forth and back.
Thanks Oliver Billing

HI Veeru,
Thanks for this quick reply. According to you suggestion I am following this design pattern to create the Async AIA Interface.
==============================================================================================
(1.Request) (2.port Type=ProjectEBS) (3.CreateProject)
Async BPEl Process ---------1-------> CreateProjectReqABCS---------------2--------------------->ProjectReqEBS----------3------------->CreateProjectProvABCS
(4.portType=ProjectEBSResponse) (5.CreateProjectResponse) (6.Response Message)
CreateProjectProvABCS------------------4-------------------------->ProjectRespEBS------------5--------------->CreateProjectReqABCS---------6----------->Async BPEL process
==============================================================================================
Would you please confirm these points :_
1. While connecting to EBS from ReqABCS I am selecting only PortType=CreateProjectEBS, I am not providing Callback PortType, Beacause we are using seperate Service to handle the response. Is this step is correct ?
2. Also while connecting to EBS from ProviderABCS i am selecting tType=CreateProjectEBSResponse, I am not providing Callback PortType. Is this is correct ?
3. In Requester ABCS test page on EM console there are two WSDL service showing. Which one to select while providing wsdl in ProjectResponse EBS while handling response message
Thanks
Sunil
Edited by: 856749 on Apr 23, 2012 12:47 PM

Correct User Exit search for a Buisness Process..

Hi Team,
Can someone please explain me how should i go about to search for the correct User Exit running behind a Process(A buisness Process ) which would require certain enhancements ..
Thanks .
Regards,
SK

Hi,
Go to SE93, and give the t.code which you want
Then take the package and go to SMOD
There click F4 for enhancements, then click on information system, there you give package and enter
Now, you will get corresponding exits.
this is one way.
other way is we need to check whole program or exit
go to that t.code, goto system -->status .There find out the prog name.
Then double click the program name.
In attributes teb, you find the package.
go to SMOD, press F4 and input package
Hope this helps
Regards,
Anbu

Buisness Process Monitoring

Dears,
I need to configure Buisness Process Monitoring on my solman 7.0 server.
Please share some document for it.
Shivam

Hi Shivam,
please visit the following blog and the referenced blogs therein:
/people/community.user/blog/2008/09/02/sap-business-process-monitoring-within-sap-solution-manager
Regards,
Martin
http://service.sap.com/jsm
Scheduling
/people/martin.lauer/blog/2009/06/10/sap-is-first-vendor-to-provide-a-comprehensive-job-management-suite

EWM buisness process

Dear all,
I have a good knowledge of sap WM.Now i have got a supporting project for sap EWM.
we support below process:
Inbound del. >order >unload >GR >putaway
Outbound del.>ODO >Picking/packing >loading>GI>yard
Also i discover that here no TR & TO are created so how it works ?
Please help me out understand the SAP EWM.
Thank u all in advance.
Regards,
Rocky

Hi,
In EWM TR and TO are not used, instead Warehouse orders is the terminology, I am no EWM expert, but currently developing my knowledge about the same.
Thanks
Shailesh

How one can define Bus. Process Modeling(BPM) and Business Process Engine

Hi,
How one can define BPM and BPE in simple terms?
it would be great if once can give practical example.
thank you,
cg

hi,
I would compare these with java.
Eclipse-->Business Process Editor
Java Code(Business logic) --> Business Process (BPM)
Java Compiler --> Buisness process Engine
Regards,
Siva Maranani.

Restrict number of business processes

Hi everybody
Can some one give a hint on how to restrict the start of a business process. I have a JDBC Adapter configured, which is pooling every minute on a small table. A soon as certain entry a given by the polled message a business process starts. I would like to avoid that during the processing of the business process the next polling sequence is starting the next buisness process, because it could be that the next one accesses the same data.
I belive this question is not new, but obviously my search criteria are not sufficient to find the answere in the forum. ;->>
Regards Oliver

Hi,
don't you think you need to recreate your JDBC query?
do you use update statement (in the JDBC sender adapter)
to make sure that:
>>>>because it could be that the next one accesses the same data.
this does not happen?
Regards,
michal

Create Business Process in SOLAR01 and SOLAR02

Hi Experts,
I have a basic doubt in SOLMAN. Can I add a sub process under main buisness process in Solar01 or Solar02 transactions?
For example, I am working in business process "Administering Employee HR Data", under that I have seven sub-processes as delivered. Here is my requirement, Can I add some more sub processes in there?
Prompt response is appreciated and rewarded.
Namrata.

Hi Namrata,
Please use the following links to get more info about Solar01 or Solar02 transactions.
Solar01
http://help.sap.com/saphelp_sm40/helpdata/en/45/f6da633a292312e10000000a11466f/content.htm
Solar02
http://help.sap.com/saphelp_sm40/helpdata/en/04/9dc53ace2d6265e10000000a114084/content.htm
I hope these links are helpful
Regards,
Satish.

List of Business Processes activation for ESS/MSS-Erec,ECM,TM,Succession

Hi experts,
Can anybody please guide me on the list of Buisness Processes/Packages & Services to be activated for ESS/MSS-Erec,ECM,TM,Succession.
i tried to get the details in SE80 & SICF but could not recognize much.

you are on which release? accordingly, you ll have switches for that release or you can check it here, Please go through admin guides and RKT http://help.sap.com/erp_hcm_ias_2013_02/helpdata/en/d4/cd725198e02066e10000000a441470/frameset.htm

PO release strategies with Contract

Hi,
implementing a PO release strategy (SAP-MM module)I need to consider the case in which a PO is assigned to a Contract.
If so, different release strategies should be selected according to the PO value.
Possible cases:
S0-strategy 0: Contract does not exist, PO value>=0eur
S1-strategy 1: Contract exists, PO value>=100eur
S2-strategy 2: Contract exists, PO value>=200eur
Is someone aware if it is possible to activate such release strategy without defining manually in the characteristic for CEKKO-KONNR field all possible contract single values (entire range)?
Thanks a lot for helping!
Regards,
Elisabetta Rizza
Please contact me at following mail addresses:
[email protected]
[email protected]
Hi Elisabetta,
I've moved this here because it is a more appropriate thread. BPX is the place for discussing the role of the buisness process expert. This is a MM question
Message was edited by: Marilyn Pratt

Dear Amit,
Requirement: If GR posting date exceeded 45 days than delivery date set in PO, then delivery date in PO has to be changed to current system date and at the same time New Release Strategy (B1) has to be triggered with one release code (02) automatically.
So in that case the values in Release Strategy (A1) and (B1) would remain same,,, as you suggested we will assign the value 01 u2013 USRC1 to Rel Strategy (A1) and 02 u2013 USRC1 to Rel Strategy (B1) and the same we will try to incorporate in the coding of Exit u2018'M06E0004'
We will check the process and confirm the same.
Thanks for your suggestion.
regards,
Urendra Kumar

Error from BPE Adapter using in Async Sync scenario

Hi,
I'm trying to use a Asyn Sync pattern with BPM:
1)File adapter get a file from AS400, split it several XML messages and send to XI(Async)
2)XI get each message and forward to BPM using XI adapter
3)BPM has to send the message to R/3 via BAPI (Sync)
4)R/3 reply the result message to BPM(Sync)
5)BPM has to send the result message to e-mail system if an error had occurred in BAPI call (Async)
When I send directly from File adapter to R/3 works like a charm, but when I want use the BPM, a soap header error says to me, that cannot identify a data type that Im using in the message sent by File adapter.
The error that I'm getting is BPE Adapter UNKNOWN_MESSAGE in soap header.
Regards,
Eduardo

I got the same problem after installing new patches.
This is what I had to do:
Go to SXI_CACHE
- Choose Business Processes
- select your Buisness Process
If your buisness process has Return Code 99
- Click "Repeate Activate" button
- On the next screen, click Activate again.
This worked for me. Good Luck!

Error: Read timed out&MESSAGE_NOT_FOUND.

Hi,
There's a synchronous scenario (File-File). A connection failure occured during a query from buisness-process (BPM). Since then an error (error message) appears constantly in Runtime Workbench-Component Monitoring-Communication Channels.
Success
RRB: entering RequestResponseBean
Success
RRB: passing through ...
Success
RRB: suspending the transaction
Success
RRB: leaving RequestResponseBean
Success
Application attempting to send an XI message synchronously using connection File_http://sap.com/xi/XI/System.
Success
Trying to put the message into the call queue.
Success
Message successfully put into the queue.
Success
The message was successfully retrieved from the call queue.
Success
The message status set to DLNG.
Error
Received XI System Error. ErrorCode: GENERAL ErrorText: com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out ErrorStack:
Error
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out.
Error
Transmitting the message using connection http://*****:8010/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out.
Error
The message status set to FAIL.
Error
Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out
Error
Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Read timed out
Error
Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
File removing and the channel rebooting the channel donu2019t help.
After rebooting the channel:
Error
Received XI System Error. ErrorCode: MESSAGE_NOT_FOUND ErrorText: ErrorStack: XML message not found
Error
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:.
Error
Transmitting the message using connection http://*****:8010/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:.
Error
The message status set to FAIL.
Error
Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:
Error
Attempt to process file failed with com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:MESSAGE_NOT_FOUND:
Error
Attempt to process file failed with com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
Any ideas?

hi,
try this,
go to Message Monitoring in RWB, delete all the messages with status system error and onhold.
it shd solve your problem
Regards,
Sukarna.chirumamilla.

HTTP Error code 500

Hi ,
I am new to SAP XI area, I was trying to post one xml document from one service(Gentran Integration Suite) to SAP XI. I have correct URV which i used in my buisness process model . When i try that URI in my browser and enter user name and password i can sucessfully login. When i try to run Business process from GIS(gentran Integration Suite) using Http adapter services. I get error Http internal server error 500. Can any body help that what configuration need to be done. THis error is on part of SAP XI or on other application server side.
Thanks to all in advance,
sam70

Hi,
Can Anybody help further in this matter? here is part of log file
[2005-07-29 15:27:29.908] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> StateMachine.handleCommand(IS,C,O) entering with state [Waiting], command [RECEIVED], and argument [null].
[2005-07-29 15:27:29.908] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> StateMachine.handleCommand(IS,C,O) executing [RECEIVED].
[2005-07-29 15:27:29.908] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62 SHTTPClientAdapter_HTTPClientAdapter_node1_112267604958322> Command.execute(IS,b,O) starting on command [RECEIVED], accepted = [true], implemented = [true].
[2005-07-29 15:27:29.908] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62 SHTTPClientAdapter_HTTPClientAdapter_node1_112267604958322> Command.execute(IS,b,O) ...Entering handleRECEIVEDCommand
[2005-07-29 15:27:29.908] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62 SHTTPClientAdapter_HTTPClientAdapter_node1_112267604958322> HttpCommand.handleRECEIVEDCommand(IS,b,O)- starting on command [RECEIVED], accepted = [true]
[2005-07-29 15:27:29.908] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62 SHTTPClientAdapter_HTTPClientAdapter_node1_112267604958322> Command.execute(IS,b,O) ...Exiting handleRECEIVEDCommand
[2005-07-29 15:27:29.908] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> StateMachine.handleCommand(IS,C,O) executed [RECEIVED] successfully, transitioning to state [Ready].
[2005-07-29 15:27:29.908] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> HttpSession.setState(S, b) - transitioning from state [Waiting] to state [Ready].
[2005-07-29 15:27:29.909] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> HttpState.handleWaitingExit(IS) - called for sessionID [HTTPClientAdapter_HTTPClientAdapter_node1_112267604958322]
[2005-07-29 15:27:29.909] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> State.invokeEntryExitHandler(IS,S) successfully invoked [handleWaitingExit].
[2005-07-29 15:27:29.909] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> HttpState.handleReadyEntry(IS) - called for sessionID [HTTPClientAdapter_HTTPClientAdapter_node1_112267604958322]; machine state is currently [Ready]
[2005-07-29 15:27:29.909] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> HttpState.handleReadyEntry(IS) - Session is with response; calling performCallback ...
[2005-07-29 15:27:29.909] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> HttpSession.performCallback() - Final response document length is [2634]. Performing workflow resume...
[2005-07-29 15:27:29.909] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> HttpClient.resumeWorkFlow() - Starting ...
[2005-07-29 15:27:29.909] DEBUG <HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62> HttpClient.resumeWorkFlow() - Received response: <b><b>HttpClientResponse: HTTP status [500] HTTP reason phrase [Internal Server Error] Primary Document [Document Id: server:2048c96e:105628a1ac3:15cf</b>Thread ID:</b> HTTPClientAdapter_HTTPClientAdapter_node1-Thread-62
Hash Code: 157891201

PRs with addition of only line items and Clubbing Service and Normal POs

Hi SAP Gurus
We are in ECC 6.0
in our buisness process The PRs are created by the Project system
they could create only one PR with the Same No and when ever a new PR is created it is adding up to the existing PRs line items where the line item has increased to 800 nos now,
also they are clubbing PRs of service and material PRs we need it to be separate
as service PRs and Mtrl PRs are processed separately by different Dept and cannot use the same PR which is here only One at the same time.
the line items are getting added eventhough the PR is released,
Pls tell me how the Above problem could be Solved.
Thanks and Regards
SATHISH

Thanks a lot Rakesh Pradhan the configuration works,
let me know is there any Links to the Document type of PRs to the Project system so as to create Separate PRs for Services.
is there any Complications by having different PR no for PRs every time. as the system was initially configured in this fashion and now as per the requirement we are bound to change the configuration, to separate SERVICE and Mtrl PRs.
Thanks and regards
Sathish

To find purchasing organisation for material

Hi Experts,
Sounds quite a trivial query but i really could not find the way out to link material with purchasing organisation.
Please note that we do not want to use Puchasing Info record tables. This is so because requirement itself says automating the PIR creation process through ME11. and for that we need to filter out materials which have a specified Purchasing Organisation.
Now you may ask a question as to how Purchasing org is maintained on the very first place. This has been created via provision in ISR webform for creating material.
I hope i have made my query clear enough. Seeking your expert advise on the same.
Thanks,
Shreya

Hi,
I think you can not find Purchase organization for a material as one maerial may come from multiple purchase organizations
(However it depends on the Buisness process) but you can find purchase ogranization with material and plant combination.
Regards
Bikas

Buisness Process monitioring

Similar Messages

Maybe you are looking for