Business Agreement in SAP CRM

Hello Experts,
My present project is related to ISU and CRM.
As CRM consultant, I would like to know how to configure Business Agreement in CRM system.
Please could you suggest any config guide for Business Agreement creation in CRM?
Regards
Madhu

In Service Marketplace you will find this document:
"Set-Up and Load Guide for Business Agreements and Contract Accounts".
You might find it useful.
Mihai

Similar Messages

Instructions for installing Business Package for SAP CRM 7.0

We hae CRM 7.0 and we have a Netweaver 7.0 (2004s) portal. Can someone please either point me to the documentation or explain to me how to install the Business Package for SAP CRM on the portal?
Thanks
Angie

need to go to service marketplace and go to Support Packages and Patches/My Companys Applciation Components/SAP CRM/SAP CRM 7.0/Entry by Component/CRM Portal Content and the business packages are there.

Initial Load of BUAG_MAIN (Business Agreements) IS-U = CRM

Hello. We are integrating ISU to SAP CRM 7.0.
We have been replicating Business Partners between the two systems for a couple of years, and now wish to begin replication the Business Agreements <=> Contract acconts objects (BUAG_MAIN)
In our development system, in order to successfully process the initial load of BUAG_MAIN, I had to RE-run an inital load of BUPA_MAIN. I am really unconfortable having to do this in our productive systems!
My question to you experts:
Is there a way to run an initial load of a dependent object (BUAG_MAIN) without having to re-run an initial load of the parent object? Any suggestions would be greatly appreciated!

Hello Pratik,
- There are no dumps in ST22
- There are no errors in SMW01
- No. range settings are set as following:
CRM: Master Data-> Business Agreement-> Define Number Range for Business Agreement:
No.     From number         To number          Ext.
01       000100000000       000199999999     X
02       000200000000       000299999999
ERP/IS-U: Financial Accounting (New)-> Contract Accounts Receivable and Payable-> Basic Functions->Contract Accounts->Number Ranges and Contract Account Categories
No.     From number         To number          Ext.
01       000100000000       000199999999
02       000200000000       000299999999     X
But before inital download we have set all no. ranges to External as prescribed in the set-up and load guide for business agreements and contract accounts.
(There is just one Business Agreement Class and one contract account category)
Hope to hear from you soon.
Kind Regards
Saima

Can Inbound IDOC create a BP(Business partner) In SAP CRM system

Hi
Req:
Contractor data is transfered from ERP system to CRM using Message type HRMD_ABA with ALE Distribution Model in place.
Inbound IDOC is Successfully Posted when checked in WE05 in SAP CRM System.
Question :
1. Can an INBOUND Idoc create BP automatically or is there need of Configuration or Any custom program .
Appreciate Your Response
Bhanu Polsani
Edited by: Bhanu Polsani on Oct 4, 2011 6:10 PM
Edited by: Bhanu Polsani on Oct 4, 2011 6:16 PM

You can maintain two different address for the business agreements (can be treated as mailing address for the printed invoice)but you can not maintain more than one standard address for BP as any given time.
Regards,
Sanjoy

Business Activity in SAP CRM 7.0 WebUI

Hello SAP Experts,
In SAP CRM 7.0, under maintain activities, I have assigned categories to class interaction log, appointments and tasks.
The same categories have been assigned to some business activities. For example Category Sales Call (001) is assigned to Interaction Log. The sales call is in turn assigned to Transaction Type- Business Activity.
When I log on to web ui, I am able to see this business activity under Interaction Log and create the transaction.
In the same way, when I assign category u2013CX4 (Telephone Call) to class Phone Call to a Transaction Type-Sales Call (0001-business activity), I am not able to see the same in web ui.
The same holds good when categories are assigned to Class Miscellaneous, Letter, Meeting, E-mail etc, are in turn assigned to transaction types are visible in web ui.
Kindly clarify, whether all the business activities fall under APPOINTMENT, INTERACTION LOG, TASK, E-MAIL AND VISIT PLAN in WEB UI.
The other category class, apart from the above mentioned, where can they be used?
If yes, how do I do the customizing which would enable me to see all in WEB UI?
Thanks in advance
Regards,
Srinivasan.R

Hi Raghavendran,
I am facing the same problem. Other than Appointments,Tasks,Email and Interaction record I cannot create any other Activities.
I defined a new Transaction type assigned the category Misc but cannot create the Activity on WEBUI. As Raja suggested I have also assigned the Channel as WEBUI and ICWEBCLIENT but still does not work. Is there any Role specific customization that needs to be performed?
Please let me know if your issue is resolved and how you resolved it.
Any help will be greatly appreciated.
Thanks,
Pooja

How To upload business partner into sap crm using xif Adapter by XML File

HI Guru's,
I got Requirement to upload the business partner information into sap crm system using xif adapters from xml file , please give imformation how can achive this .
Regards,
Naveen Kumar MS

Dear Naveen,
please see the information given in note 448742 General notes on CRM external interfaces!
Hope you can find the information!
Regards, Gerhard

Integration between SAP business one to SAP CRM, CRM to ECC 6.0

Scope: We have been told to prepare Integration process which is a part of out project plan. Here we have 2 business cases where our SAP XI comes into picture.
1.     SAP business One talks to SAP CRM through XI to exchange DMS business data.
2.     SAP CRM talks to SAP ECC 6.0 through XI to exchange master data.
Suggestions: What kind of adapters (includes proxies) do we prefer to get the data transferred in both cases with high performance level.
Appreciate your response with proper reward points.
Thanks,
Kumar.

Hello,
          you can use Proxies for performance benefit for transsferring data between CRM to XI and ECC to XI system.
         Also you can use ALE -IDOC communication between your ECC system and XI for master data communication

How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

Hi experts,
I need to know the procedure to stop replicating a particular BP #1234(example) from CRM to ECC. I don't want this BP to be replicated in ECC as in ECC this BP will not be maintained.
BDOC failure:
In my current scenario BDOCs are failing with error like "No BP exist". Since this BP #1234 itself is not present in ECC, the error is obvious.
This BP #1234 is defined in CRM as an Org. Unit. We don't maintain Org. Unit in ECC. All other BP are saved under this BP(#1234).
Issue:
So whenever a new BP(example #ABC) is created, the BUPA_REL type BDOC fails with error "BP with number #1234 doesnot exist.
I don't want this to happen. So what i found if we can stop the replication of this particular BP #1234, then if we make any change to the relation BP, this error should not come.
Please help me to resolve this BDOC error.
regards,
Vicky

Hi Ganesh,
1st we create a Organization structure through tcode-PPOSA_CRM.
A business Partner is created which represent the Organization Structure partner ID.
2nd we create a BP through and do a Org. assignment in tcode - PPOSA_CRM.
A business Partner is created which represent the any customer partner ID.
As soon as you do an assignment,assigning the customer BP to the org BP, a BUPA_REL BDoc flow but it fails.
Error we get in the BDoc: "BP XXXX doesnot exist"
Reason: Since this Org BP is not present in ECC, the BDoc fails in CRM.
Possible Resolution 1:
1. I created this Org. BP in ECC through CRMM_BUPA_MAP
2. The BP got created.
3.Then i tried to assign a new customer BP to Org BP to check if the issue is resolved, but we get another type of error 'BP is not defined as internal Org. Unit".
I don't know how to define BP as an internal Org. Unit in ECC?
Can you please help me in this.
Possible Resolution 2:
If i can stop this particular BUPA_REL BDoc which contains this Org.unit BP, from getting replicated, means when i assign the customer BP to Org.Unit BP, BUPA_REL should not be triggered.
I don't know if this is possible or not, but if this is possible, i would consider this a last option to resolve this issue.
Please let me know if this helps you to understand the issue i am facing?
regards,
Vicky

Synchronize Business Partner from SAP CRM - SAP ERP

Hi experts,
I would like to synchronize our BPs from the CRM into our SAP ERP System.
What Ive done until now:
1. start initial load "bupa_main" from "CRM" to "OTLP"
2. check if everything is correct with R3AM1 - after ~ 1 hour -> done (green)
3. I check with transaction BP in the ERP System if dates were transported - no
4. I check the outbound queue of the CRM "SMQ1" - it seems ok
5. Now Ive checked the inbound queue of our ERP Sytem "SMQ2" - but there is nothing - that means no queues available
What did I do wrong.
Ive checked both rfc connections with "remote login" and it works out. But only if my "RFCUSER" is on usertype "DIALOG". In the document C71: CRM Connectivity - the RFCUSER Usertype should be"Communication data"? Maybe thats the problem?
Kind regards.
Chris
Edited by: blaxus on Dec 16, 2010 12:23 PM

HI,
Yes, RFCUSER dialog is not correct.
Change to system or service.
And that Tcode smw01 show?
Denis

What are the drawbacks of implementing QAS (Quick Address System) with SAP CRM

Hi,
What are the drawbacks of implementing QAS (Quick Address System) for duplicate address management in SAP. QAS is a third party software that deals with duplicate address in the system.
Thanks in advance...

Hi Peter,
You can refer the CRM installation guide which has all the details including the post installation steps you require:
You can refer to CRM installation guide in SAP Service Market Place,which would also guide you about post-installation steps.
Please go through the below link:
service.sap.com/instguides> SAP Business Suite Solutions>SAP CRM--> SAP CRM 7.0
Hope this helps.
Regards
Yogesh

Roles in BP for SAP CRM 4.0 6.2.2.

I have imported the business package for SAP CRM 4.0 6.2.2 in the portal (EP 6.0 SP2).
After the import of other business packages the roles provided with the BP could be connected to a group or user by user administration > roles.
I cannot find the roles provided with the BP CRM 4.0. When i look in the directory structure on the server, there are plenty of roles in the folder
... > import > business package for sap crm 4.0_6_2_2 > roles.
I have copied some roles to other folders, but still i don't see them in the portal.
Where can i find these roles, or what do i have do to get the roles shown to me?
Thanks in advance,
Timo

Hello,
I have looked in the logfile. I get an object content list where all the roles are mentioned.
Furthur on in the log file it says that the migration of the .par's is succesful. But for some .ivu's i get the warning: The PAR file: com.sapportals.km.par containing profile: 'navigation' was not deployed prior to IVU handling, no template iView can be created ,path searched : par:/applications/com.sapportals.km/components/navigation
This warning is followed by the error (severe) Object was not migrated: Import of iView: com.sap.pct.crm.infocenter.news.AuthorPartnerCompany Failed !
I get this for several .ivu's. All for com.sapportals.km.par.
Since is have had no error on a .par i suspect that i should have imported/installed something else first. But what?
Now i will miss some iviews en pages but i think i should get something since a lot of iviews and pages are migrated successful.
However, in the logfile nothing, beside in the object content list, is mentioned about roles. But i get something about a rolecopier:
The object /com.sap.pct.crm.pad.RoleCopier.ivu is defined for skipping in cms_mapping.properties.
Followed by
SUCCESS: Object was skipped.
And something about a checkrole:
The object /com.sap.pct.crm.pad.RoleCheck.ivu is defined for skipping in cms_mapping.properties.
Followed by
SUCCESS: Object was skipped.
It looks like that this is OK.
And .... later on in the logfile i get the following serie of messages:
- PCD lookup for page: portal_content/com.sap.portal.migrated/ep_5.0/pages/com.sap.pct.crm.pad.RoleCopier did not find target ,Exception message: Child not found: com.sap.pct.crm.pad.RoleCopier at portal_content/com.sap.portal.migrated/ep_5.0/pages, The page will be created
- Page com.sap.pct.crm.pad.RoleCopier was created successfully!
- WARNING: iView com.sap.pct.crm.pad.RoleCopier Was skipped
- Page layout name is com.sap.portal.fullWidth
- SUCCESS: Object was created successful. page id : com.sap.pct.crm.pad.RoleCopier, page title : Role Copier
And the same for the RoleCheck.pag
When i imported the support package for the business package i got 2 roles (com.sap.cnt.crm.container.sapcrm40.all and com.sap.cnt.crm.crm_default_services). I have assigned these 2 roles to a group, but i don't see a new tab.
In the logfile for the support package i get for each rol within the rol SAPCRM40.All the WARNING: StructureObject.handle_Link(/roles/com.sap.pct.crm.container.SapCRM40.All/Customer): The target object of the link (source object) is not available. You can ignore this message if the target object will be migrated later.
Followed by SUCCESS: StructureObject.handleLink(): DeltaLink to portal_content/com.sap.portal.migrated/ep_5.0/roles/com.sap.pct.crm.Customer was created successfully.
The migration of SAPCRM40.All ends with
SUCCESS: Role com.sap.pct.crm.container.SapCRM40.All was migrated successfully.
What is happening here?
Why don't i have the par com.sapportals.km.sap?
What is going wrong with the roles?
Greetings,
Timo

SAP Interactive Forms by Adobe with SAP CRM

Hello community,
I'm sure most of you would have seen the exciting videos showcasing the use of SAP Interactive Forms by Adobe with SAP CRM 2007 & SAP CRM 7.0. In case you haven't, you can find a couple of them [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05bc7e9-0183-2a10-17ab-cf77195fcdec] and [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00fddbc0-e3c9-2b10-05b4-dd1aced4ad12].
What I would like to ask of the community here is to share some of the experiences and feedback regarding the use of SAP Interactive Forms by Adobe with different business processes in SAP CRM, be it order managemnt, activity management or business partner management. Any implementation examples would be great!
Thanks in advance!
Regards,
Sandeep

Hi again
I solved the problem by installing the Adobe Designer 7.1.
Now my next problem is that I have no ADS (Adobe Document service).
That makes sense to my Adobe forms newbi brain. My guess is that the ADS must run on the JAVA stack and my testdrive is a ABAP stack only.
My next shot will be to install an JAVA testdrive on top of my ABAP testdrive and see what happens.
=0)

Can any body tell me how to pull SAP-CRM data into BW

Hi BW guru`s,
Does anybody tell me how to pull SAP-CRM data into BW.
Is there any configuaration setings takes place in CRM system or BW system?
Provide few of CRM datasources names (Transaction data Datasources)
Please explain indetail and give some examples.
Thanks in advance,
venkat

Hi.......
SAP CRM uses BW Adapter to extract data from SAP CRM and send it to SAP Business Information Warehouse and SAP NetWeaver Business Intelligence. For mBDocs, BW Adapter extracts objects for CRM business transactions and CRM billing use the BAdI CRM_BWA_MFLOW. However, in releases prior to SAP CRM 2005, after using transaction code RSA5 to activate business content in SAP CRM, you must use transaction code BWA5 to activate the business content for the BW Adapter.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
Hope this helps you.........
Regards,
Debjani........

SAP CRM upgrade

Dear Experts,
If I want to upgrade from CRM5.0 --> CRM7.0, is there a new fresh installation or what they does?
Please let me know or suggest me the suitable document on this topic.
Thank you..
Nitin

Hi,
CRM5.0 is based on SAP NetWeaver 7.0
CRM7.0 is based on SAP NetWeaver 7.0 EHP1.
According to Note 1248905, when the source version is NW7.0 SPS19, the
target version, is required to be SAP EHP1 for Netweaver 7.0 SPS5.
And this requirement is mandatory.
For more details of upgraded components and procedure, could you please
refer to following upgrade guide:
http://service.sap.com/instguides
->SAP Business Suite Applications
->SAP CRM
->SAP CRM 7.0
->Upgrade
->Upgrade Guides - SAP CRM 7.0 SR1
Regards,
Aidan

SAP CRM Vs other CRMs

Hi can any one tell me the exact difference between SAP CRM and other CRMs like siebel CRM,peoplesoft crm etc, How SAP CRM is suitable for organizations?

HI
Basically all CRM's follows Same theory and concepts from lead stage to service contract the concepts won't change for CRM to Another CRM , only screens and configuration and Implemetation Guide changes, where as if you take siebel CRM
it's more into Technical side , very less scope for the Epople with Functional knowldge, delas with servers,data migration you need to know Vb scrpting Oracle also for Siebel, also you must have some technical knowledge , you also can be Siebel Functional called as Siebel Business Analysts , but very few like out of 100
4 may bethere hardly as business analysts, in sap crm scenario as this involves
long implementation process they need technical consultants , functional consultants separately, in siebel u must be technofunctional , but in Sap need not be,even oracle crm also u must be technonfunctional with oracle sql, pl sql and functional knowledge,People soft also techno functional with oracle , any scrpting language,but only sap crm allows you to prove your functional skills this iam saying by exp i worked on both crm/s siebel and sap siebel for 2 years sap into 3 years and now continuing,other crm's i have theoritical knowledge,Microsoft is liitle but user friendly but also needs technical skills,Product is CRM it may belongs to any company it may be a SAp, Siebel , Oracle, i think it's helpful
don't forget to give points
Venkat

Business Agreement in SAP CRM

Similar Messages

Maybe you are looking for