Business Area validatin for cash journal

Hi Experts,
I have 4 Company codes, Each company code is having 5 business aras.
Accourding to Our client Requirement Cash journals are created as per business area wise. Now I want to validate the cash journal for particular business area.
C.Code 1000
Business areas 1000,1001,1002,1003,1004
Cashjournals 1000,1001,1002,1003,1004
the csh journal 1000 should allow business area 1000, if we enter any other business area , it should show the error,
Please give the solution, it is very helpful for me.
Thanks and regards
Ramu

Dear Pradeep
Please Can you give me more details on this validattion,
Regards
Ramu

Similar Messages

How to Restrict Business Transaction Types in Cash Journal

Dear All
I need to Restrict Business Transaction Types in Cash Journal based on Exp/Revenue Types . Is there nay solution of this problem and one more thing i need to disable/hide Cash Hournal Tabs for specific User.
Full point will be awarded.
Thanks

hi
the follwoing links may helpful to you for cash journal configs.
http://help.sap.com/bp_bblibrary/500/documentation/N70_BPP_04_EN_DE.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/e9d13973da1f60e10000000a114084/content.htm
http://www30.sap.com/japan/businessmaps/690A1366EABD4B029F9F9CB727553B61.htm
nagesh

Create check lot for cash journal

I need to create the check lot in order to link this to cash journal.
Currently we are using the check lot to pay vendors (AP) and the doc
type KZ is triggered and other payments through GL which gives doc type
PV.
Now I will need to create a check lot in order for receiving a check
into my petty cash through the cash journal.
Usually, the steps involved is via FCHI, FCH5 and lastly FBZ5.
How do I ensure that when a check is issued from our bank to cash
journal and I record this in FBCJ, the doc type triggered is also PV.
Another problem is that we require the payment advice to be created for
the check issued via FBZ5.
Regards.

Can't it be routed through one time vendor account
issue a check to one time account & later in FBCJ do a receipt from the same one time account. So you dont have to create a sepreate check lot for cash journal.
One time account has to be cleared manually.
You dont have to use check related transaction to create the checks sepreately,
Hope this solves your issue.
Revert if not solved in detail.
Thanks,
Chandu
Message was edited by:
Chandu

Badi or user exit for Cash Journal

Dear friends,
As I am not able to post a special GL transaction through cash journal, i request you to help me for a badi or user exit which may be available for cash journal.
Regards
Dhirav shah

Hello Ajeshi,
below are the user exit available for fb02 transaction code.
Exit Name           Description
F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
FEDI0001            Function Exits for EDI in FI
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)
but i fill your problem can be solve using function exit FMRESERV and specifically 'EXIT_SAPLFMR4_002' function module. change the field xblnr from t_accit table.
I hope this will slove your problem.
Regards,
Vikash

Authorisation for Cash Journal according to profit center

Hi all,
In my project i'm mantaining 11 cash journals.I want such authorisation in CASH journal so that if i open cash journal of one place then i'm nt able to open /watch other location cash book.
thanks
Deepa

Hello Deepa,
When you are setting up cash journal in IMG (T code: FBCJC0), you have provision to give authorization group in the same in the column named Grp (group) after cash journal name.
In this you can specify the group ID as per your requirement and enter the same in role assigned to relevant user for performing cash journal functions.
For e.g. You have created cash journal CJ01 and CJ02 for profit center PC01 and PC02 respectively. While setting up cash journal, in group column you can enter group id as PC01 and PC02 for CJ01 and CJ02 respectively.
Group ID which you have assigned shall be mentioned in role for performing cash journal functional which is assigned relevant profit center's end user id;s.
Regards,
Nagaraj

Document type for Cash journal

Hi,
What is the document type used for cash journal document at the time of Configuration.
Regards,
KRishna

Nornaly in Cash Journal following document type used. But you can use document type as per your requirement.
Document Type: G/L Accounts AB
Document Type: Vendor Outgoing KZ
Document Type: Vendor Incoming KZ
Document Type: Customer Incoming DZ
Document Type: Customer Outgoing DZ

Business area required for subcontracting GR

Dear Experts,
In subcontracting scenario while executing GR; if we enter PO number, system proposes the component.
We have expand / collapse button which allows us to see which are the materials (BOM) getting consumed for component we are receiving.
My problem is if we expand the material tree, then for each line item of sub components I need to enter business area. If the list is too big, it is very time consuming to enter business area for each component.
Request to convey me any standard setting which copies business area automatically for sub components.
Regards,
Yogesh

Dear Yogesh,
Firstly can you please check your settings in OMBW for tcode MB01
Please check whether business area is not suppressed in your system
in transactions OMCJ and OMBW and take into account that the system
fills the business area in the vendor item if a business area can
explicitly be determined from the offsetting entries. If several
business areas were used for the offsetting entries, the field in
the vendor item is not filled. Also please check whether material is
assigned to division and whether in transaction OMJ7 is correctly set.
Also, Can you please review the attached note :
      17483 : Business area for inventory postings
Can you please review the attached notes
367813 KI235 for goods movements: What should be done?
Special stocks E/Q:
   As of Release 4.5, for special stock E/Q the sales order or the
   WBS element is primarily the key for the special stock.So that
   the sales order or the WBS element is also copied as the account
   assignment, the field selection for both fields must be
   maintained (Notes 117596 and 110675).
   117596 KI235: GI from Q/E stock (Customizing) or M7073
   110675 Valuated sales order or project stock: Error KI235
Please call the transaction OMBW and ensure that the field selection for
WBS-element (Project) is set as "Optional" (instead of Suppress).
Then please retest the reported issue.
I hope this information can be of help to you.
Best Regards,
Arminda Jack

Profit Center for Cash Journal

Hi Guru,
how to default the profit center in cash journal wise in FBCJ or else any alternative way to make to profit center default in cash journal.
Thanks and Advance
Laxmi narayan

Please assign default profit center for the GL account defined for Cash journal.
This will resolve your issue.
- Kiran

Report Writer report required by Business Area GSBER for table GLPCT ECC6

Please help,
I have a requirement for report writer report by Business Area (GSBER) for table GLPCT.
I am using Libruary PCA which has GSBER already activated
In report I am able to select GSBER in General Data Selection and generate.
However when I execute report I get error message GR410 "Characteristic GSBER cannot be combined with key figures" .
I have looked at SAPnotes 929889 1155524 and 358251, which describes solution to add field to CCSS table (structure CCR1S) however I cannot work out what structure to change for table GLPCT used in my report.
Steve
Solution was to use Libruary 8A3
Edited by: Debra Dunford on Jun 29, 2011 10:34 AM

Hi ,
If you are using the cube: 0FIAP_C20, then i guess you are using the standard extractor 0FI_AP_20 . One thing which i remember that there is a standard view in ECC : LFC1_AEDAT.
This view has two tables : LFC1 and BWFI_AEDA2.
LFC1 - Vendor master (transaction figures)
BWFI_AEDA2 - BW FI: Log Table for Changed Transaction Figures
This standard extractor uses table LFC1 to show vendor balances.
And the table BWFI_AEDA2 contains the log of the changes that has taken place business area wise and account no of the vendor wise .
Please check the view definition to confirm the same . Once you will see the joining conditions in this view you will get a clear picture of the above point .
So for your issue, you can do datasource enhancement of 0FI_AP_20 .
The logic will be based on LIFNR,BUKRS,GJAHR available from the datasource , fetch the business area from this view and populate it in your datasource .
But first check in the table BWFI_AEDA2 whether for the field BWFI_AEDA2-TABNAME= lfc1 , business areas are maintained .
Hope the above reply was helpful.
Thanks & regards
Edited by: DEADLOCKS on Apr 23, 2011 10:52 AM

How to update Business area field for alread

Hi,
Recently we activated Business area financial statements in our system. After that all SD entries are showing Business area field in all SD billing-Accounting documents.
But the entries before the above change were not showing Business area since it was not activated before. But i want to update the Business area for the old documents also. so that it will be useful for me in reporting purpose.
Kindly suggest me if there is any PROGRAM to update Business area field for the old documents.
Thanks
Sunil

Hi,
Please check the OSS Note 549182 - FAQ: Business Area Accounting
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=549182
Also OSS note 41294:-
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=41294
Regards,
Gaurav

Assign Customized Sapscript in place of the standard one for CASH JOURNAL

Dear All,
I created Customize Sap-script at the place of standard one in FBCJ (Cash Journal) , Please let me know the procedure to assign customize form at place of stancdard one.
Thanks & Regards,
Rajnarayan

Hi,
correspondence type for Cash Journal is SAP18.
The program attached in SAP18 is RFKORD80 (SPRO-Financial Accounting Global Settings (New)-Correspondence-Assign Programs for Correspondence Types). If you want you can modify driver program also by creating z. attach it to correspondance type SAP18.
For the above program you can assigned your customized script in the below navigation path:
SPRO-Financial Accounting Global Settings (New)-Correspondence-SAPscript-Based Forms-Define Form Names for Correspondence Print.
Hope this helps you.
Regards,
Azeem.

Different no range/doc. type for cash journal incoming/outgoing payment

Hi all,
I am going to set up cash journal for a customer and they want separate number range for incoming and outgoing payments.
I have read on this forum and actually don´t understand if that´s possible.
If I set up two different cash journals (one for outgoing payments and one for incoming payments) the problem is that I can call all transaction type (C, B, R, E, set in transaction FBCJC2) from both. I have a cash journal for outgoing payments where I have set a separate document type and number range for G/L accounts in transaction FBCJC0 and the same for vendor outgoing payment and customer outgoing payment, but no document type for incoming payments from vendor/customer.
When I then start to use this cash journal for outgoing payments I can´t make outgoing payments if I don´t have any money in my cash journal. Then I have to take money from my housebank by business transaction type C (receipt from bank) set in transaction FBCJC2. This becomes an incoming payment, but I got the same number range as for outgoing payments because I am in that cash journal and that number range is set per G/L account transaction per cash journal. .
How can I come around this problem?
Thanks in advance!
Best regards Lisa

Hi Pravin,
Sorry for late answer. I created three document types, one for customer, one for vendor and a third for G/L postings. It was not possible to do in another way, sorry.
Best regards Lisa

Setting for Cash Journal Transactions

Hi all,
Can someone tell whether the Vendor Line Item clearing and Special GL Transaction is possible in Cash Journal.
For example -
1. when we are giving the Advance in Cash to our employees, whether such entries can be posted with Special GL indicator ( as we do in Bank Payment thru T Code - F-48 )
2. Currently, when we are posting cash payment in Vendor Account ( thru Cash Journal ) , we need to first transaction in vendor account and then for clearing a open item against it , we need to use the T code - F-44 for manually clearing the open items. Is it possible to clear the same while posting Cash Vendor posting ( just like Bank Payment thru F-53 ).
If you have solution pls let us know.
Thanks
ps

Hi PS,
Both the functionalities are NOT possible through the cash journal.
If you pay your vendor by cash, you have to clear the vendor open item seperately.
Also, splecial GL transactions are not allowed in cash journal.
Regards,
Mike

Business Area Filter in Document Journal

Dear All,
S_ALR_87012294- Compact Document Journal
The above report can be processed for a particular User/ Document type etc , the client requires above report for a particular business area . How to resolve the issue, useful answers will be rewarded with points.
Regards
Milind Nair

Hi,
U can get the report as required by your claint, use the S_ALR_87012287- Document Journal, form this report u can select the document type/user/business area from dynamic selection or u can create the layout as required by claint from this report, and put it as default, so ever time when ever execute the report no need to select from dynamic selection.
please assign points if its usefull.
Regards
sai krishna

Restriction user wise for cash journal

Hi All,
We have three cash journal for three different units within the same company code. Now we have a bug that any user can post to any cash journal.
How to restrict the cash journal to a particulaar set of users.
Regards,
Nand

Hi,
When you customiza the cash journal in FBCJC0, you have a column "Authorization Group" which is freely definable alphanumeric field.
You enter some unique text here, and then your BASIS team can assign this authorization group to the user master of cash journal user.
That way user will be authorized to process only those cash journals which are linked to his authorization group.
Regards,
Gaurav

Business Area validatin for cash journal

Similar Messages

Maybe you are looking for