Business Partner Count in CRM or ECC system

Hi Experts,
We have a scenario in CRM. I need the unique Business Partner List.(these are also replicated in ECC)
The scenario are as below:
1.We are creating a Business Partner(BP) for each customer.
2.For each of these BP, Contract acounts are also created.
3.One BP has multiple Contract accounts.
4.One BP has multiple relationships.
5.One BP having multiple contract accounts has multiple Contracts.
6.For one premise,one BP has one contracts account and one contract only.
I need the unique BP.But i am unable to find the unique BP as duplicate BPs are also present in the system which are created due to below reason:
1. By mistake. But duplicate BP don't have any contract account associated with it.
2.If i am an owner of a house, i have my family members or my room mate who stays with me and they are included as a BP relationship. But for them also BP are created.
I have checked in tables BUT000 and BUT100 etc but not able to extract exact number of BP.
The reason for finding the Unique BP is:
There is a company which provides services to customers. Now for each customer, a BP is created. but due to mistake or due to above reason, the customer service representatives has created duplicates or not important BP which are the secondary customers.
Now to know the exact number of BP which will inturn tell me the exact number of customers, please help me know how to extract the data.
regards,
Vicky

Hi Vicky ,
I have following comments -
1. How these contract accounts are created ? Through any enhancement done ?
2. You can differentiate the same based on the number range, if you are using different number range for source account and the contract accounts. Say for source account you can keep a number range which will be different than the contract accounts.
3. Also, as a standard, if you create any relationship, it will anyway create a BP id in the system.
4. Also, if possible do the data cleansing by archiving the duplicate BP records in your system.
Hope this will be useful
Thanks and Regards
DJ

Similar Messages

Business partner replication from CRM to ECC

Hi everyone,
In case of vendor master data after business partner creation in CRM the vendor Master Data should get created in ECC
system also at the moment i dont have an idea whether it will get replicated to ecc are not can any one help me how to acheive this requirement.

>>Messages sent when I test corresponding proxy interface, but not sent when I try to create or modify BP. What else should I check to find out the reason of this problem?
BP Creation will be done be a standard SAP program may be a Function Module. Change Pointer or User Exist should be added to this BP Creation Function Module in order to trigger the Proxy Class with BP data.
Though am not an ABAP expert, I guess the changesshould be done to the standard flow to trigger Proxy Class also..
~SaNv...

Middleware: Business Partner replication from CRM 4.0 -- R/3 4.6c.

Business Partner created in CRM & is getting replicated into R/3 with Sales Area Data. Configuration is working fine.
Requirement: Automate Accounting view creation in R/3 using middleware.
1. That is if the user creates Sales view using sales organisation "xxxx" in CRM then the system should create Accounting view in R/3 company code "YYYY".
Please confirm, wheather its possible? ? How?
2. If in CRM, the Sales Organisation is "AAAA", then create accounting view in company code "BBBB" (R/3)
Your valuable input please.
With Regards,
Bapu

Hi Tiest,
Yes, PIDE entries made.
BP is replcating in R/3 successfully.
In R/3 transaction "XD01" if we create customer along with "Account Group" & "Company code", view "company code data" is visible. I would like to populate this view with "Reconciliation account" entry.
While passing data from CRM, I would like to pass company code. At present, while passing BP from CRM to R/3, Account View is not getting created.
Ex. If the user creates Sales view using sales
Organisation xxxx in CRM then the system should create Accounting view in R/3 company code YYYY.
Please reply, if further information required.

Replication Of Z Partner Functions from CRM to ECC

HI All,
We are creating the " Z Partner Functions " in SAP CRM & ECC.in our scenario partner functions flows from CRM to ECC and we want to replicate these partner functions from CRM to ECC.
So can some onle please tell me how to do this?.
Thanks in Advance,
Arun

1. Create the partner function in ECC
2. Assign the partner function to the relevant partner procedure in ECC
3. Create a partner function in CRM
4. Map the partner function as follows:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from R/3 into CRM
Create the following entry:
Partner function in R/3 Function
and also the below:
Create a mapping entry for data transfer from CRM to R/3 via the
following IMG activity in CRM:
Customer Relationship Management
--> Basic Functions
--> Partner Processing
--> Data Transfer
--> Distribution of Partner Functions from CRM into R/3
Create the following entry:
Function R/3 function Type in R/3

Mass Update of Business Partner Data in CRM

Hi,
I would like to know how I can perform a mass update of business partner data in CRM and then have this replicated into R/3.
I have found notes 802804, 876602, 859632 but these only apply to CRM 5.0 and we are currently working on CRM 4.0. Does anyone know of anything similar which exists in CRM 4.0?
I have checked other posts and found help files links like the one below but is this only on CRM 5.0? (http://help.sap.com/saphelp_crm50/helpdata/en/3c/9b56fae6c7424cafcdf17370399812/frameset.htm )
Has anyone used the tx. MASS in CRM?
Also our volume update levels is as high as 300,000 record and updating in CRM and replicating into R/3 through the middleware is causing performance problems.
Does anyone have any tips on the best approach for this? Many thanks.
Regards
JoJo

Mass not available in 4.0, could write your own LSMW routine but you still will create bdocs for updates so not sure how that will improve your performance.

Extracting Business Partner information from CRM to XI

What is the best approach to extract Business Partner information from CRM to XI

Hi,
by IDOCs of course
you can create them just like I did:
/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
(you jut need to change from proxy to ALE - another module)
but bisically it's a standard to generate
a business partner record and send it as an IDOC from CRM
Regards,
michal

Updating business partner addresses in CRM

Hi,
I Need to build a interface to update business partner addresses in CRM and assign it to a address usage. I can not find a suitable FM/BAPI for this purpose. Please advise me how to accomplish this.

Hi,
Where do you start to activate or configure Business Address Services in R/3 Business partners. Any links to user guides or startup documents will be greatly helpful.
Thanks very much
Cheers!
Padi

How to stop the replication of a particular business partner from sap crm to sap ecc - BDOC

Hi experts,
I need to know the procedure to stop replicating a particular BP #1234(example) from CRM to ECC. I don't want this BP to be replicated in ECC as in ECC this BP will not be maintained.
BDOC failure:
In my current scenario BDOCs are failing with error like "No BP exist". Since this BP #1234 itself is not present in ECC, the error is obvious.
This BP #1234 is defined in CRM as an Org. Unit. We don't maintain Org. Unit in ECC. All other BP are saved under this BP(#1234).
Issue:
So whenever a new BP(example #ABC) is created, the BUPA_REL type BDOC fails with error "BP with number #1234 doesnot exist.
I don't want this to happen. So what i found if we can stop the replication of this particular BP #1234, then if we make any change to the relation BP, this error should not come.
Please help me to resolve this BDOC error.
regards,
Vicky

Hi Ganesh,
1st we create a Organization structure through tcode-PPOSA_CRM.
A business Partner is created which represent the Organization Structure partner ID.
2nd we create a BP through and do a Org. assignment in tcode - PPOSA_CRM.
A business Partner is created which represent the any customer partner ID.
As soon as you do an assignment,assigning the customer BP to the org BP, a BUPA_REL BDoc flow but it fails.
Error we get in the BDoc: "BP XXXX doesnot exist"
Reason: Since this Org BP is not present in ECC, the BDoc fails in CRM.
Possible Resolution 1:
1. I created this Org. BP in ECC through CRMM_BUPA_MAP
2. The BP got created.
3.Then i tried to assign a new customer BP to Org BP to check if the issue is resolved, but we get another type of error 'BP is not defined as internal Org. Unit".
I don't know how to define BP as an internal Org. Unit in ECC?
Can you please help me in this.
Possible Resolution 2:
If i can stop this particular BUPA_REL BDoc which contains this Org.unit BP, from getting replicated, means when i assign the customer BP to Org.Unit BP, BUPA_REL should not be triggered.
I don't know if this is possible or not, but if this is possible, i would consider this a last option to resolve this issue.
Please let me know if this helps you to understand the issue i am facing?
regards,
Vicky

Business partner field in CRM - Corresponding field in ECC

Hi Middlware/CRM Gurus.
I would greatly appreciate if anyone can answer this quesiton:
I need to find out field in ECC customer master data that gets mapped to CRM data.
Basically I am looking for field mapping of ECC Customer master data to CRM master data.
If I go to CRM Business partner creation and need to know if this field gets replicated to ECC and if it does what is the corresponding table/field it gets stored in ECC?
Any help is greatly appreciated!
Thank you!

Hello Uday,
There is no one to one mapping between CRM table and R/3 table.
Please find below few of the R/3 tables for BP:
KNA1
KNAS
KNBK
KNVA
KNVI
KNVK
KNVP
KNVV
You can open then in txn:SE11 and check for field descriptions of the table.
And corresponding CRM tables would be,
BUT000
BUT020
BUT*
ADRC
etc
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.

Business Partner Error when downloading Plants- ECC to CRM

Hello,
I have run the initial load in R3AS tcode for the adaptor object DNL_PLANT
The status in R3AM1 tcode shows that the same has been done
However no entry has come in the table crmm_locmap
When checked in slg1 tcode, the system displays the below error's
There is no address for business partner
Please advice if I am missing any customization.
Kind Regards
Atul

Hi Willie,
Thanks for the response, sorry for the late reply since was busy with work
Managed to resolve this issue , we had activated the duplicate check functionality and there was an issue with the trex server configurations, once this was resolved we managed to resolve the above issue.
Hence closing this one.
Kind Regards
Atul

Replicating custom texts in BP from CRM to ECC systems

Hi All,
I'm trying to set up synchronisation of a custom text held against a business partner in CRM with our ECC system. So, in CRM, if I go to transaction BP and go to change mode for a partner and then go to the long texts tab... As well as the 2 standard Correspondance and Accounting Note text ID's my functional consultant has also configured a third text, with ID Z001. We are trying to get this to synchronise with ECC.
With a bit of debugging I can see the text is being sent in a BDOC across to ECC but it isn't being populated into the customer master. On the ECC side the custom text has been set up against the sales area of the customer master - I'm not sure of what else has been done there.
Has anyone done this before who can give us some help/advice? Bear in mind I know almost nothing about CRM to ECC synchronisation and BDOC's so I'm struggling with this!
Thanks in advance,
Gareth.

Hi Gareth,
While researching this issue I came across note number 622133. https://websmp202.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=622133&_NLANG=E
Its an old note, but it pointed me in the general direction of FM 'PI_BP_MAP_TEXT_IDS_CRM_R3'. This FM looks in table 'CRMTEXTID' to check if any mappings were maintained. Now if you do a where-used on CRMTEXTID, you see that it is used in a view, V_CRMTXTID. So go to SM30, maintain that view, map your R/3 text IDs to CRM text IDs and you should be all set.
There must be a more elegant way to get to this table, but in the short term, this should fix your problem. I haven't tested it yet on my system but I get the feeling this should work

Business Partner Replication from CRM to R/3

Hello friends,
I am not able to replicate BP from CRM to R/3. When i create a business partner i see bdoc
in SMW01 with status in yellow colour and there is no error description. If i try to debug
the replication in foreground, i can see all the entries which i entered in CRM done in R/3,
but it stops at the Customer attribute screen(Additiona fields as seen in Extras in the task
bar) and doesnot goes further, even if i enter something it remains in the same state. As
per me the customer attribute field in not mandatory in R/3, i dint found the settings for
it in SPRO but logically if R/3 system allows me to save the customer without entering the
attributes then my thinking should be right.
Kindly give me some pointers to resolve this or please let me know the check points,
prerequisites for replication of customers from CRM to R/3.
Thanks & Regards,
Yogesh

Hi Yogesh,
Check the R/3 transaction OB20, Double clidk on "Create Customer (Centrally) "
Here we maintain the options for all the field e.g required / optional etc..
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Business Partner creation in CRM/SRM with ID Management

Hi,
I have tried to find info about Business partner management with IDM to CRM/SRM...
Customer would have two use cases.. Internal and External users...
Internal use case is quite straight forward in IDM documentation.. I have two questions about this,,,
1. ALE connection from HCM to CRM/SRM to create BPs to internal users... is there anywhere documentation how to configure this ALE connection?
2. Is after SU01 user is created - Linking to BP automatical when using Business Suite connector ?
External use case. Customer would like to implement scenario, where BP is created either:
1. on CRM/SRM and IDM user would be created... and after approving new IDM user SU01 user with roles would be created nd BP linking would happen...
2. on IDM user is created - BP and SU01 user would be created on CRM side... and linking between them..
On external use case I have understood- that first one is possible without stronger customization and ABAP programming?
--- first one requires VDS and SPML ID store on IDM side
And something to send Newly created BP from CRM to IDM with SPML
or does IDM check regularry with SPML CRM for newly created BPs??
Does anyone know how actually this is happening?
And is there any special configuration needed on CRM side? or some transaction to run after BP creation?
IDM version 7.1 SP5
Ystävällisin terveisin / Kind Regards
Veli-Matti Luotonen

Hi,
Check whether the BP roles have been defined in the system.
Go to Customizing:
Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Define BP Roles
Here you can define BP Roles and BP Categories.
Make sure the appropriate category is assigned to the BP role that you are trying to create. For this select the BP role and click on the "details" button.
Also read the documentation provided here.
Regards,
Reema.
PS. Reward appropriate points to useful answers.

How To upload business partner into sap crm using xif Adapter by XML File

HI Guru's,
I got Requirement to upload the business partner information into sap crm system using xif adapters from xml file , please give imformation how can achive this .
Regards,
Naveen Kumar MS

Dear Naveen,
please see the information given in note 448742 General notes on CRM external interfaces!
Hope you can find the information!
Regards, Gerhard

Migrate business partner data to CRM sytem

Dear all,
We're introducing a new CRM system in which we want to maintain the business partner information. One topic of this project is to migrate (export) all relevant business partner information from IS-U to the new system. My question now is if SAP has any standard solutions for exporting master data to e.g. an csv file?
Thanks in advance,
Georg

Hi Ivor,
Thanks for the suggestion. Though the output here doesn't encorporate all information we need. We are switching to a Microsoft solution (dynamicx AX2012) for maintaining the business partner. So we need to extract all business partner master data (general, addresses, contacts and roles) from IS-U. I know SAP has standard tools for importing such as EMIGALL or LSMW but I haven't found it for exporting.

Business Partner Count in CRM or ECC system

Similar Messages

Maybe you are looking for