Business sevices

when we use business service ? In case of using http adapter and soap adapter,do we should have to use business service only ? please clarify?

Hi,
Business Service:
It is mostly used in B2B scenario - within two different companies (internet), where you don't know the Business Systems of your partner.
Business Service, you need to maintain entries manually for inbound and outbound interface in ID
Business Service denotes a service like webservice, Httpservice etc.
While creating Business Services need not to registered in SLD.
A Business Service represents an abstract, addressable unit. Business services are used in cross-company processes, for example, if the parties
involved have only published their interfaces and not their system landscape, or it is only partly known. Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
Business System:
Systems which are defined in SLD called Business System.
A Business System is something that physically exists.
  A Business System are Technical,Physical or logical system. Like R/3 System.
For all our A2A Scenario within the company (intranet)we generally define Business System.
  Example:
Let us assume that ,if you want to download a file from a mainframe,transfer this file with file adapter and put it in an R/3 with an RFC call.
Then the mainframe and the R/3 are your business systems, which do physically exist.
Business Systems are used when you are sending data to and from an R3 system and can be of ABAP, JAVA and Third Party Types.
>> In case of using http adapter and soap adapter,do we should have to use business service only?
You can use both Business service and Business sytem as well.
Hope this clear your concept
Sameer

Similar Messages

  • Fetching Sender Business sevice in UDF, returns null

    Hi,
    I have written a UDF to  extract sender service. Here is the code snippet
    map = container.getTransformationParameters();
    String senderService = (String) map.get("SenderService"); // Sender Business Service
    //  some logic depending on sender service
    As I could see the trace, senderService contains value null and hence UDF fails.
    My scenario is Multiple IDocs to File
    N:1 and thus using BPM
    Any clue?
    Thank you
    Mugdha Kulkarni

    Hi
    Imports: java.util.Map;
    public String GetService(Container container){
      //write your code here
    String headerField;
    java.util.Map map;
    map = container.getTransformationParameters();
    headerField = (String) map.get(StreamTransformationConstants.SENDER_SERVICE);
    return headerField;
    Srini

  • Regarding Business System For HTTP Receiver Adapter.

    Hi Everyone,
          Which Type of Business System do I need to select For defining HTTP Receiver Adapter.
    I  am doing File to Http Scenario. What will be my output look like, If i am Sending file as
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_Source_FILE xmlns:ns0="http://city.net/FILEtoHTTP">
       <Message>
          <Id>123456</Id>
          <Head>
             <Id>123456</Id>
             <Filename>sample.xml</Filename>
          </Head>
          <Body>hello</Body>
       </Message>
    </ns0:MT_Source_FILE>
    Regards,
    Varun

    Varun,
    You can use third party Business system or else you can use Business sevice also.
    Take a look at these blogs,
    Push Data to MVC Architectured application using XI
    XI - SAP Business Connector integration using the HTTP adapter
    Yuga

  • IDOC is posting with Errors in File to IDOC scenario

    Hi,
       I did the File  to IDOC scenario for CREMAS  . IDOC is posting with Errors .. i.e. in the status record it was showing  56- EDI: Partner profile inbound not available  ..
    If I manually process that IDOC in WE19 , then it was processing successfully..    and in the  we19 it was showing Inbound Processing : Port Not Maintained    but even though manually it was posting fine...
    any ideas regarding this will be appriciated..... 
    Regards
    Babu

    Please check whether you had done the following assuming your doing File to Idoc
    Settings in your Business service for the receiving system
    Please specify the RFC detination, SAP System and Client of the Receiving System in the adapter specific detials.
    Settings in R/3
    WE20 - Add the partner profile for the particular message type cremas and process code.
    Your statement
    " and that same logical system name  had given as Message Specific Attributes in the Sender Business Sevice parameters in I.D "
    Please do mention R/3 Details in the receiver business service or system.
    Thnz

  • Using Service Locator in Struts app without ant eejb components

    Hi
    We are developing a Struts application witjout any EJB components.
    But we may go for EJB in future.
    Keeping that in mind we want to introduce a service locator between the action class and the business logic. So it may be easier to acomodate in future.
    But how do i do that ? Can anyone help me in this?
    Since all the Service locator example which i have seen is implemented using ejb
    Please do help me in this
    Thanks
    Ottran

    Controller (Action class) gets reference to Business Delegate (BD) and calls a particular business method.
    The BD gets reference to Service Locator (from JNDI tree) to access a business service. The business sevice can be implemented using EJB, POJO, Web Service, legacy app, etc.
    A UML diagram is available at
    http://www.softwareleadership.org/docs/J2EEDesignPatterns.html
    Click on Business Delegate to view diagram with Service Locator.

  • Start stop sevices of E Business Suite R12.1.1 in windows 2003

    I have sucessfully installed E Business Suite R12.1.1 in windows 2003 now I see in services window the following services has been added for oracle
    Oracle Fulfillment Server VIS_ansari
    Oracle Process Manager for VIS_ansari
    Oracle VIS VSS Writer Service
    OracleConcMgrVIS_ansari
    OracleJobSchedulerVIS
    OracleServiceVIS
    OracleVIS_ansari_TOOLSASControl
    OracleVIS_ansari_TOOLSProcessManager
    OracleVIS_ansari_TOOLSTNSListenerAPPS_VIS
    Oracle-VIS_ansari_WEBOHProcessManager
    OracleVIS_db111_RDBMSTNSListenerVIS
    I have set startup type of all services to Manual, because I dont want to let operating system start and stop these services , I want to do this task manualy
    Now I want to know how many services I have to start and please specify that in which order I have to start services and do I have to start all services or only some of
    the services which are mentioned above

    Hi,
    The startup sequence is as follows:
    1) Start the database and the database listener
    OracleServiceVIS
    OracleVIS_db111_RDBMSTNSListenerVIS
    2) Start the application services
    Oracle Process Manager for VIS_ansari
    OracleVIS_ansari_TOOLSTNSListenerAPPS_VIS
    OracleConcMgrVIS_ansari
    For the shutdown, stop the application services first, then stop the database and the database listener.
    Note: I am listing the necessary services you have to start/shutdown, starting other services is optional.
    Btw, the statup/stop sequence is outlined in [Oracle Applications Maintenance Procedures|http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121admp.pdf].
    Regards,
    Hussein

  • Logical system for business service!!!!!!!!!

    Hi all,
    I send a file from filesystem to XI which inturn converted to IDOC and posted to SAP system. Filesystem i've added as a business system(which has a logical system in R/3).
    now i've added the filesystem as a business service(assinged to a party). So if send the file i'm getting the error as "Unable to convert sender service to an ALE logical system".
    How can i resolve this problem?
    can we assign the business service a logical system name ?(as business system)
    What could be the procedure for processing this kind of b2b scenario where we dont have information about systems or sevices in SLD?
    Thanks in advance for your replies........
    Santhosh.

    Hi just check this Bolg for Help
    /people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
    Ques.3
    Or refer to this link
    <b>/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    if u want to learn more bout
    How to configure Idoc adapters
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    reward if helpful
    Regards
    Sachin Dhingra
    Message was edited by: Sachin Dhingra

  • Business System Update

    I have made a change to my business system in the SLD but I do not see the changes in the Integration Directory... I have tried CPACache Refresh but this has made no difference.
    Basically I changed the Client and Logical system name of the business system and I want to see the changes in my integration Directory...
    Like with SWCV's when you make a change you can simply reimport the SWCV and you will see all the changes is there a similar process with Business systems?

    Hi Ricardo,
    In ID goto Environment --> clear SLD data cache...
    and then double click the Business system in ID
    goto sevices --> adapter specific identifiers and click compare with SLD in change mode..
    Regards,
    sridhar
    <b>Thats fine and you are welcome</b>
    Message was edited by:
            sridhar reddy kondam

  • Wrong business area at the time of ML81n and Miro

    Hi exeprt
    In service PO, i have taken cost center 3000, in KS02 for 3000, business area is 3000.when i have did the Sevice sheet Acceptence(ML81) business area (1000) is picking wrong for the  GR/IR g/l. when i did the miro, in business area field i have given 3000, but when i am doing Miro simulation, against the G/R g/L business area (1000).
    check the same scenario in development is coming properly and patched is also the same on ll the cleint.
    I have check business area assignment in enterprise structure, okb9,
    Kinldy suggest what are the area to check.
    Regard
    Nabil

    Hi expert
    Thnx for the advisable suggestion, but i would like to know, y system will not  pick the business area of the cost center which is assign.
    Regard

  • Result cache refresh at business service (OSB) ?

    Hi,
    I have configured my business service at osb side to cache the result. My business service is pointing JCA- dbadapter which is calling a stored procedure.
    Is there any way to update/refresh the cache if there are any changes in the corresponding tables which the store procedure is using. I have googled a lot on this but have found nothing on it.
    Any help would be very much appreciated.

    Is there any way to update/refresh the cache if there are any changes in the corresponding tables which the store procedure is using. I have googled a lot on this but have found nothing onAFAIK, OSB does not provide any functionality to refresh the cache without hitting the backend sevice.
    The result caching in Oracle Service Bus is available for Business Services. When you enable result caching, the Business Service will not reach the backend service and the response will come from the cache entry. This entry can expire and if the entry is expired, the next service call will indeed reach the backend service and update the cache entry.
    Each cached result has its own TTL. When a TTL is reached, Oracle Coherence flushes that individual cached result.
    It would be better if you can raise a support ticket and ask for enhancement.
    Regards,
    Abhinav Gupta

  • Use one account or multiple for 10 domain users of Office 2013 Home & Business

    I have 10 seats of the retail version of Office Home & Business 2013 for use in a domain environment. Windows 7 Pro 64, Server 2008R2 environment. No exchange. Blank slate.
    Should I install all with the same account for ease of management, or setup a new MS Live account for each user? Can I do either, and what are the advantages to each?
    Thank you.

    Hi,
    Both are ok, but neither is really good.
    In your scenario, I suggest you use Office 365 to manage all these, which is more recommended:
    http://office.microsoft.com/en-001/business/compare-office-365-for-business-plans-FX102918419.aspx
    http://office.microsoft.com/en-001/business/compare-all-office-365-for-business-plans-FX104051403.aspx
    Regards,
    Melon Chen
    TechNet Community Support

  • How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

    How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
    I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems.  When we finally decided to cut over to SBS 2008, that’s when everything went to hell.  I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box.  During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations.  There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb.  After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
    I have attempted in this white paper to detail the steps to assist others who may be in a similar situation.  I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine.  BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true.  Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box.  After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging.  Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
    From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer.  The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe!  By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost.  Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded.  At any rate, take your time and follow the steps to achieve a successful installation. 
    PRE-INSTALLATION TASKS
    Back Up SBS
    It’s always a good practice to backup your server before deploying any kind of major system changes.  Although this step is optional, I recommend it in case you need to restore your server for any reason.  Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone.  You will need a full backup with system recovery information to restore.  Here are the basic steps:
    Click: Start > Programs > Administrative Tools.  Right-click “Windows Server Backup” and choose “Run as administrator”.
    Click “Backup Once” under Actions in the right-hand pane.
    Choose the “Different Options” radio button under Backup Options.
    Choose the “Custom” radio button.  What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
    Select the “SYSTEM (C)” checkbox, uncheck any others.  Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
    Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups.  You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images.  Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency.  Also, make sure the “Verify after writing (recommended)” checkbox is selected.
    Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product.  If like me you rely solely on SBS for your backups, choose the full backup option.
    Confirm everything and click “Backup”.  This process may take several hours depending on the size of your system.
    Verify ISAPI Filters:
    In IIS Manager, double-click the server instance in the left-hand pane.
    In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS.  If it’s set up correctly you should see two entries:
    IsapiFilterModule              %windir%\System32\inetsrv\filter.dll
    IsapiModule                        %windir%\System32\inetsrv\isapi.dll
    If either of these modules are missing, you will need to re-install these (google for a solution).
    Set Up Development Environment
    Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\).  For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
    Copy and paste your CFML files and directories into the new DEV root Web directory.  This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders. 
    Open IIS Manager and double-click the server instance in the left hand pane.  Expand the “Sites” folder.  Right-click the Sites folder and select “Add Web Site”.
    Enter a name in the “Site Name” box (e.g., “test-site”).  You will notice that the system will automatically create a corresponding Application Pool with the same name.  NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
    Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
    Don’t worry about testing the connection.  If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV).  Don’t worry about this for the time being.
    Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”).  Click “OK”.
    Configure Application Pools for Installation
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”.  NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
    Modify the application.host.config File for 64-Bitness
    Click: Start > Programs > Accessories.  Right-click “Notepad” and choose “Run as administrator”.
    Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
    Do a search and change this one line from:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
    To this:
    <add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
    Restart the IIS Admin service.
    Set HTTP Compression
    According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
    Click: Start > Programs > Accessories.  Right-click “Command Prompt” and choose “Run as administrator”.
    At the command prompt, change directory to intetsrv by typing: cd inetsrv
    Run the following command:
    C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
    This will turn off HTTP compression for all sites in IIS.
    In IIS Manager, double-click the server instance in the left-hand pane.  Double-click the “Compression” icon in the IIS section of the center pane.
    Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
    Restart the IIS Admin service.  This should enable compression and coldfusion to work at the same time.
    NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
    C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
    INSTALLATION TASKS
    Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
    Right-click the file and select “Run as administrator”.
    Accept the terms of the License Agreement.
    If you have an Enterprise license, enter it.  For our purposes, just click the “Developer Edition” checkbox.
    Select “Server configuration” – the default radio button.
    I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”.  It should be fine, particularly if you install documentation.  My preference was to keep the install as plain vanilla as possible.
    Select the directory path for Coldfusion to install into – default is :C\Coldfusion
    THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS.  Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button.  Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”.  Hit “OK”.
    Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”).  Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”).  The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
    Enter an Administrator password.
    Choose to Enable RDS, or not.  I enable this by preference but it is not required.  This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely.  Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
    Confirm everything to kick off the install.
    If all goes well you should see a message at the end stating that the install was successful.  I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install.  NOTE: we will open it a different way during the post-installation tasks.  The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
    POST-INSTALLATION TASKS
    Verify CF Installation:
    The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8.  The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory.  Our CFIDE files, however, are located within: D:\DEV.
    To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
    This should bring up the Coldfusion Administrator Login screen.  Enter in the Administrator password you created during the install to log in and configure your application server.
    Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
    Fix Application Pool Defaults to Re-enable SBS Web Applications:
    At this point, Coldfusion Administrator and your test CMFL Web site should be working properly.  The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start.  Fortunately, this is easily remedied by performing the following steps:
    In IIS Manager, double-click the server instance in the left-hand pane.  Click on “Application Pools” to display the list of server application pools in the center pane.
    In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
    Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time.  This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.).  There is no need to restart IIS.
    Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
    In IIS click to highlight the application pool for your new site (e.g., “test-site”).  In the right-hand pane, click “Advanced Settings”.  Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
    Lastly, jump up and down for joy!  Hopefully now, everything is working.  Best of luck!! ..Paul D (MCP).

    First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
    Second, this is probably your problem right here:
    http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
    In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
    As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
    Dave Watts, CTO, Fig Leaf Software

  • Problem in Creation of business partner

    i create business partner with the help of BAPI_ISUPARTNER_CREATE_FROM_DATA
    i want to add mobile number but there is no any field such like mobile number in address data table.
    But there is separate table of telephone data. When i use this table to store the mobile or telephone number at that time bapi stores the data on the telephone table in independent communication but not in direct communication fields .
    Please , suggest me what i do to store the data in direct communication instead of indirect communication.
    Thanks for review my post...

    Hi ilesh,
    There are 2 kinds of communication data -
    1. Address dependent- this is linked to the address, and would need to be created / changed using BUPA_ADDRESS_CHANGE. You need to pass the BP number and the address number to which you want to link the tel / mobile number.
    2. Address independent  - this is directly linked to the BP, without dependency on the BP's address. You can modify such data using BUPA_CENTRAL_CHANGE.
    Now, you can decide which fields you want filled, and accordingly use the correct FM. Second point - how to make sure the number gets created as a mobile, and not normal telephone. There is a field called R3 user in the table ADR2, and also in the Telephone structures that you fill while calling the FMs mentioned before. Make sure you pass the correct value of R3 user ( i think it is 2 for mobile, but you can check it by looking at the value range for this element in ADR2 through transaction SE11).By default, R3 user is 1, which denotes landline telephone. To create mobile numbers, pass R3 user = 2 (or whatever value you look up from the value range).
    This should solve your problem.
    Cheers,
    Rishu.

  • Logical Systems in Business Services

    Hi
    In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
    i.e. to do
    MyBusServ1, Z_LS_1 
    MyBusServ2, Z_LS_1
    is not possible ?
    When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
    Thanks
    Damien

    Thanks for the replies
    Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
    Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
    Thanks
    Damien

  • Impressão de Cheques - Padrão Brasileiro - SAP Business One v. 8.8

    Olá Experts!
    O Layout de impressão de cheques default do SAP Business One 8.8 que está pré configurado no PLD imprime cheques nos padrões brasileiros? Ou tenho que customizar o PLD para imprimir os cheques?
    Muito obrigado,
    Ricardo Vieira

    Resolvi o problema alterando o PLD dos cheques.

Maybe you are looking for